summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds5-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-26pinctrl: move subsystem mutex to pinctrl_dev structPatrice Chotard5-164/+176
This mutex avoids deadlock in case of use of multiple pin controllers. Before this modification, by using a global mutex, deadlock appeared when, for example, a call to pinctrl_pins_show() locked the pinctrl_mutex, called the ops->pin_dbg_show of a particular pin controller. If this pin controller needs I2C access to retrieve configuration information and I2C driver is using pinctrl to drive its pins, a call to pinctrl_select_state() try to lock again pinctrl_mutex which leads to a deadlock. Notice that the mutex grab from the two direction functions was moved into pinctrl_gpio_direction(). For several cases, we can't replace pinctrl_mutex by pctldev->mutex, because at this stage, pctldev is not accessible : - pinctrl_get()/pinctrl_put() - pinctrl_register_maps() So add respectively pinctrl_list_mutex and pinctrl_maps_mutex in order to protect pinctrl_list and pinctrl_maps list instead. Reintroduce pinctrldev_list_mutex in find_pinctrl_by_of_node(), pinctrl_find_and_add_gpio_range() pinctrl_request_gpio(), pinctrl_free_gpio(), pinctrl_gpio_direction(), pinctrl_devices_show(), pinctrl_register() and pinctrl_unregister() to protect pinctrldev_list. Changes v2->v3: - Fix a missing EXPORT_SYMBOL_GPL() for pinctrl_select_state(). Changes v1->v2: - pinctrl_select_state_locked() is removed, all lock mechanism is located inside pinctrl_select_state(). When parsing the state->setting list, take the per-pin-controller driver lock. (Patrice). - Introduce pinctrldev_list_mutex to protect pinctrldev_list in all functions which parse or modify pictrldev_list. (Patrice). - move find_pinctrl_by_of_node() from pinctrl/devicetree.c to pinctrl/core.c in order to protect pinctrldev_list. (Patrice). - Sink mutex:es into some functions and remove some _locked variants down to where the lists are actually accessed to make things simpler. (Linus) - Drop *all* mutexes completely from pinctrl_lookup_state() and pinctrl_select_state() - no relevant mutex was taken and it was unclear what this was protecting against. (Linus) Reported by : Seraphin Bonnaffe <seraphin.bonnaffe@stericsson.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-26pinctrl/pinconfig: fix misplaced gotoLaurent Meunier1-1/+1
This update contains a basic fix that went unseen through test and review. Signed-off-by: Laurent Meunier <laurent.meunier@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-23pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enterTomasz Figa1-2/+1
Commit de88cbb7 moved definitions of chained_irq_enter and chained_irq_exit to a generic header, which must be now included instead of the legacy arch-specific one. This patch fixes build error caused by including the legacy header leading to undefined chained_irq_enter and chained_irq_exit symbols. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-19pinctrl/pinconfig: add debug interfaceLaurent Meunier1-0/+232
This update adds a debugfs interface to modify a pin configuration for a given state in the pinctrl map. This allows to modify the configuration for a non-active state, typically sleep state. This configuration is not applied right away, but only when the state will be entered. This solution is mandated for us by HW validation: in order to test and verify several pin configurations during sleep without recompiling the software. Change log in this patch set; Take into account latest feedback from Stephen Warren: - stale comments update - improved code efficiency and readibility - limit size of global variable pinconf_dbg_conf - remove req_type as it can easily be added later when add/delete requests support is implemented Signed-off-by: Laurent Meunier <laurent.meunier@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-18pinctrl: abx500: fix issue when no pdataPatrice CHOTARD1-1/+0
Fix an issue when probing pinctrl-abx500 with no platform data. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09Merge tag 'v3.9-rc5' into next/cleanupArnd Bergmann6-5/+69
This is a dependency for the mxs/cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09pinctrl: sunxi: Rename wemac functions to emacMaxime Ripard1-18/+18
The pin functions associated to the ethernet controller were introduced with the label "wemac", which was the name of the ethernet driver in the allwinner source tree, while the real name of the IP is actually "emac", as advertised in several documents including the datasheet. Since this is part of the device tree bindings, and that these part of the bindings have not yet be released in a kernel version, it seems like the good timing to change it and assure consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: exynos5440: add gpio interrupt supportThomas Abraham1-0/+142
Exynos5440 supports gpio interrupts on gpios 16 to 23. The eight interrupt lines originating from the pin-controller are connected to the gic. Add irq-chip support for these interrupts. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodesThomas Abraham1-3/+6
The property 'samsung,exynos5440-pins' is optional in configuration nodes which are included in the Exynos5440 pin-controller device node. Fix the incorrect failure in driver probe if 'samsung,exynos5440-pins' property is not found in the configuration nodes. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8505: Staticize some symbolsSachin Kamat1-2/+3
Silences the following warnings: drivers/pinctrl/pinctrl-ab8505.c:274:28: warning: symbol 'ab8505_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8505.c:351:32: warning: symbol 'ab8505_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8540: Staticize some symbolsSachin Kamat1-2/+3
Silences the following warnings: drivers/pinctrl/pinctrl-ab8540.c:302:28: warning: symbol 'ab8540_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8540.c:379:32: warning: symbol 'ab8540_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab9540: Staticize some symbolsSachin Kamat1-2/+3
Fixes the following warnings: drivers/pinctrl/pinctrl-ab9540.c:382:28: warning: symbol 'ab9540alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab9540.c:457:32: warning: symbol 'ab9540_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8500: Staticize some symbolsSachin Kamat1-2/+3
These symbols are used only in this file. Silences the following warnings: drivers/pinctrl/pinctrl-ab8500.c:392:28: warning: symbol 'ab8500_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8500.c:458:32: warning: symbol 'ab8500_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: abx500: Staticize some symbolsSachin Kamat1-5/+5
These symbols are used only in this file. Without this patch we get the following warnings: drivers/pinctrl/pinctrl-abx500.c:520:5: warning: symbol 'abx500_gpio_request' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:527:6: warning: symbol 'abx500_gpio_free' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:614:5: warning: symbol 'abx500_gpio_request_enable' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:714:5: warning: symbol 'abx500_pin_config_get' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:721:5: warning: symbol 'abx500_pin_config_set' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: Add pinctrl-s3c64xx driverTomasz Figa5-0/+832
This patch adds pinctrl-s3c64xx driver which implements pin control interface for Samsung S3C64xx SoCs. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: samsung: Handle banks with two configuration registersTomasz Figa1-0/+10
This patch adds support for banks that have more than one function configuration registers, e.g. some of the banks of S3C64xx SoCs. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: samsung: Remove hardcoded register offsetsTomasz Figa3-37/+15
This patch replaces statically hardcoded register offsets of Exynos SoCs with an array of register offsets in samsung_pin_bank_type struct. Thanks to this change, support for SoCs with other set and order of registers can be added (e.g. S3C24xx and S3C64xx). Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: samsung: Split pin bank description into two structuresTomasz Figa4-36/+49
This patch splits pin bank description into two structures, one describing bank type (currently only bitfield widths), which can be shared across multiple banks and second containing bank-specific parameters including a pointer to a bank type struct. It is a prerequisite for further patch removing the statically hardcoded register offsets, making it impossible to support SoCs with different set and order of pin control registers. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: samsung: Include pinctrl-exynos driver data conditionallyTomasz Figa1-0/+2
Since pinctrl-samsung is a common part of the pin control support for several Samsung SoCs, it can be compiled without Exynos support enabled. This patch surrounds Exynos-specific driver data with ifdefs to include them only when support for Exynos is enabled. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> [Fixed up EXYNOS4->EXYNOS] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: samsung: Protect bank registers with a spinlockTomasz Figa3-0/+37
Certain pin control registers can be accessed from different contexts, i.e. pinctrl, gpio and irq functions. This makes the locking provided by pin control core insufficient. This patch adds necessary locking using a per bank spinlock as it was done in the old Samsung GPIO driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04Merge tag 'v3.9-rc5' into develLinus Walleij5-4/+68
Linux 3.9-rc5 Conflicts: drivers/pinctrl/pinconf.c
2013-04-04pinctrl/abx500: fix ab9540 alternate functionPatrice Chotard1-1/+1
This fix allows to correctly select default and alternate pin mode. By default for all ABx500 family chip, pin default mode is selected by clearing corresponding bit in GPIOSELx register except for pins which support alternate function, in this case, corresponding bit must be set. But, due to an unlogical hardware implementation, for one particular pin (GPIO11) reverse setting must be done. For that, update the alternate function array by declaring that this pin supports alternate function. Same issue has been fixed in pinctrl-ab8505.c Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl/pinconf: partial revert of pin config debugfsLinus Walleij1-207/+0
I accidentally left this patch: commit 6f9e41f4e673bf9ae6a5c0831b1524a91ea1c440 "pinctrl/pinconfig: add debug interface" in the tree though the patch was not yet finished. Revert it partially (we need the infrastructural changes). Cc: Laurent Meunier <laurent.meunier@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl/nomadik: add device tree bindings for db8540Gabriel Fernandez1-0/+4
This adds a simple device tree binding for db8540 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: simplify the re-enable old state code in pinctrl_select_stateRichard Genoud1-19/+3
Instead of just enabling the settings that were disabled in the 1st loop, it's simpler to recall pinctrl_select_state with the old state. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: select_state: don't call pinctrl_free_setting on errorRichard Genoud1-1/+9
As Stephen Warren pointed out, pinctrl_free_setting() was called instead of pinmux_disable_setting() on error. In this error code, we want to call pinmux_disable_setting() where pinmux_enable_setting() was called. And when pinconf_apply_setting() was called, we can't do much to undo the pin muxing (the closest thing I can think about for "unmuxing" a pin is muxing it as GPIO input). Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: coh901: Fix error checking in u300_gpio_to_irqAxel Lin1-2/+5
The pointer "port" is always not NULL if gpio->port_list is not empty. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: pinctrl_select_state: set the old_state back on errorRichard Genoud1-0/+2
In unapply_new_state, the old state is re-applied, but p->state is not set back as it should. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: remove superfluous optimization in pinctrl_select_state_lockedRichard Genoud1-9/+1
As Stephen Warren suggested, checking first if the setting->node entry is the first in the list or not is superfluous, as it is checked again in the list_for_each_entry bellow. So, remove it, the code will be simpler and lighter ! Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: use dev_info instead of pr_info in pinctrl_select_state_lockedRichard Genoud1-3/+2
And remove superfluous brackets. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: sunxi: add clock supportEmilio López1-0/+8
For the port controller to work, we need to enable the apb0_pio gate. This commit adds the ability to enable one clock specified on the device tree to the pinctrl driver. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl: core: add dependence of GPIOLIBHaojian Zhuang1-0/+8
In file included from drivers/pinctrl/core.c:30:0: include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep': include/asm-generic/gpio.h:270:2: error: implicit declaration of function '__gpio_get_value' [-Werror=implicit-function-declaration] include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep': include/asm-generic/gpio.h:276:2: error: implicit declaration of function '__gpio_set_value' [-Werror=implicit-function-declaration] drivers/pinctrl/core.c: In function 'pinctrl_ready_for_gpio_range': drivers/pinctrl/core.c:297:9: error: implicit declaration of function 'gpio_to_chip' [-Werror=implicit-function-declaration] drivers/pinctrl/core.c:297:27: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/pinctrl/core.c:304:45: error: dereferencing pointer to incomplete type drivers/pinctrl/core.c:305:26: error: dereferencing pointer to incomplete type drivers/pinctrl/core.c:305:39: error: dereferencing pointer to incomplete type cc1: some warnings being treated as errors make[2]: *** [drivers/pinctrl/core.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make[1]: *** Waiting for unfinished jobs.... It's caused by CONFIG_GPIOLIB isn't enabled for some platform. So add the dependence on pinctrl_ready_for_gpio_range(). Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03pinctrl/abx500: fix ab8505 alternate functionPatrice Chotard1-1/+1
This fix allows to correctly select default and alternate pin mode. By default for all ABx500 family chip, pin default mode is selected by clearing corresponding bit in GPIOSELx register except for pins which support alternate function, in this case, corresponding bit must be set. But, due to an unlogical hardware implementation, for one particular pin (GPIO11) reverse setting must be done. For that, update the alternate function array by declaring that this pin supports alternate function. Reported-by: Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: mvebu: prevent walking off the end of group arrayDavid Woodhouse1-12/+21
While investigating (ab)use of krealloc, David found this bug. It's unlikely to occur, but now we detect the condition and error out appropriately. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: re-enable old state in case of error in pinctrl_select_stateRichard Genoud1-1/+19
If a new state is applied, the groups configured in the old state but not in the new state are disabled. If something goes wrong and the new state can't be applied, we have to re-enable those groups. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: disable and free setting in select_state in case of errorRichard Genoud1-3/+25
If enabling a pin fails in pinctrl_select_state_locked(), all the previous enabled pins have to be disabled to get back to the previous state. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: create pinctrl_free_setting functionRichard Genoud1-13/+19
This prepares the implementation of pinctrl_select_state_locked() free code. No functionnal change. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: fix typo in headerRichard Genoud1-1/+1
Clearly, "node" was meant instead of "not" Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: sirf: using for_each_set_bit to simplify the codeWei Yongjun1-8/+2
Using for_each_set_bit() to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: coh901: Fix checkpatch errorSachin Kamat1-1/+1
Fixes the following checkpatch error: ERROR: space required before the open parenthesis '(' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: generic: Fix checkpatch errorsSachin Kamat1-3/+3
Fixes the following type of checkpatch errors: ERROR: space required before the open parenthesis '(' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: generic: Make 'conf_items' staticSachin Kamat1-1/+1
'conf_items' is used only in this file. Silences the below sparse warning: drivers/pinctrl/pinconf-generic.c:37:24: warning: symbol 'conf_items' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: at91: Fix checkpatch errorsSachin Kamat1-8/+9
Fixes the following types of checkpatch errors: ERROR: "foo * bar" should be "foo *bar" ERROR: "foo* bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: "(foo*)" should be "(foo *)" ERROR: space required after that ',' (ctx:WxV) ERROR: "(foo*const*)" should be "(foo *const*)" ERROR: space required before that '*' (ctx:VxB) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: at91: Remove duplicate constSachin Kamat1-2/+2
const declared twice. Fixes the following sparse warning: drivers/pinctrl/pinctrl-at91.c:815:21: warning: duplicate const drivers/pinctrl/pinctrl-at91.c:849:21: warning: duplicate const Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: exynos5440: fix invalid use of sizeof in exynos5440_pinctrl_probe()Wei Yongjun1-1/+1
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl/nomadik: Fix checkpatch errorsSachin Kamat1-3/+3
Fixes the following types of checkpatch errors: ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl/nomadik-db8500: Fix checkpatch errorsSachin Kamat1-2/+2
Silences the following type of checkpatch errors: ERROR: space required after that ',' (ctx:VxV) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: remove pxa pinctrl driverHaojian Zhuang7-2892/+0
pinctrl-pxa driver doesn't support well on DT mode. Now pinctrl-single could support DT mode & pin configuration. Use pinctrl-single driver to support MMP/PXA silicons instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-26arm: Move chained_irq_(enter|exit) to a generic fileCatalin Marinas5-7/+5
These functions have been introduced by commit 10a8c383 (irq: introduce entry and exit functions for chained handlers) in asm/mach/irq.h. This patch moves them to linux/irqchip/chained_irq.h so that generic irqchip drivers do not rely on architecture specific header files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 08:46:32 +0300