summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2012-12-13Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds7-401/+1408
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'driver-core-3.8-rc1' of ↵Linus Torvalds25-52/+52
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the large driver core updates for 3.8-rc1. The biggest thing here is the various __dev* marking removals. This is going to be a pain for the merge with different subsystem trees, I know, but all of the patches included here have been ACKed by their various subsystem maintainers, as they wanted them to go through here. If this is too much of a pain, I can pull all of them out of this tree and just send you one with the other fixes/updates and then, after 3.8-rc1 is out, do the rest of the removals to ensure we catch them all, it's up to you. The merges should all be trivial, and Stephen has been doing them all in linux-next for a few weeks now quite easily. Other than the __dev* marking removals, there's nothing major here, some firmware loading updates and other minor things in the driver core. All of these have (much to Stephen's annoyance), been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio update. * tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits) modpost.c: Stop checking __dev* section mismatches init.h: Remove __dev* sections from the kernel acpi: remove use of __devinit PCI: Remove __dev* markings PCI: Always build setup-bus when PCI is enabled PCI: Move pci_uevent into pci-driver.c PCI: Remove CONFIG_HOTPLUG ifdefs unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs sh/PCI: Remove CONFIG_HOTPLUG ifdefs powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs mips/PCI: Remove CONFIG_HOTPLUG ifdefs microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs dma: remove use of __devinit dma: remove use of __devexit_p firewire: remove use of __devinitdata firewire: remove use of __devinit leds: remove use of __devexit leds: remove use of __devinit leds: remove use of __devexit_p mmc: remove use of __devexit ...
2012-12-11Merge tag 'pinctrl-for-v3.8' of ↵Linus Torvalds45-398/+3558
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the first and major pinctrl changes for the v3.8 merge cycle. Some of this is used as merge base for other trees so I better be early on the trigger. As can be seen from the diffstat the major changes are: - A big conversion of the AT91 pinctrl driver and the associated ACKed platform changes under arch/arm/max-at91 and its device trees. This has been coordinated with the AT91 maintainers to go in through the pinctrl tree. - A larger chunk of changes to the SPEAr drivers and the addition of the "plgpio" driver for the SPEAr as well. - The removal of the remnants of the Nomadik driver from the arch/arm tree and fusion of that into the Nomadik driver and platform data header files. - Some local movement in the Marvell MVEBU drivers, these now have their own subdirectory. - The addition of a chunk of code to gpiolib under drivers/gpio to register gpio-to-pin range mappings from the GPIO side of things. This has been requested by Grant Likely and is now implemented, it is particularly useful for device tree work. Then we have incremental updates all over the place, many of these are cleanups and fixes from Axel Lin who has done a great job of removing minor mistakes and compilation annoyances." * tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits) ARM: mmp: select PINCTRL for ARCH_MMP pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910 pinctrl: pinctrl-single: Fix error check condition pinctrl: SPEAr: Update error check for unsigned variables gpiolib: Fix use after free in gpiochip_add_pin_range gpiolib: rename pin range arguments pinctrl: single: support gpio request and free pinctrl: generic: add input schmitt disable parameter pinctrl/u300/coh901: stop spawning pinctrl from GPIO pinctrl/u300/coh901: let the gpio_chip register the range pinctrl: add function to retrieve range from pin gpiolib: return any error code from range creation pinctrl: make range registration defer properly gpiolib: rename find_pinctrl_* gpiolib: let gpiochip_add_pin_range() specify offset ARM: at91: pm9g45: add mmc support ARM: at91: Animeo IP: add mmc support ARM: at91: dt: add mmc pinctrl for Atmel reference boards ARM: at91: dt: at91sam9: add mmc pinctrl support ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards ...
2012-12-02pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910Axel Lin1-3/+0
These drivers do not need to select PINCONF. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-30Merge branch 'next/pinctrl-samsung-2' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: * 'next/pinctrl-samsung-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: pinctrl: samsung: Do not initialise statics to 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-28pinctrl: remove use of __devexitBill Pemberton16-16/+16
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pinctrl: remove use of __devinitconstBill Pemberton2-4/+4
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Barry Song <baohua.song@csr.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pinctrl: remove use of __devinitdataBill Pemberton14-14/+14
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28pinctrl: remove use of __devexit_pBill Pemberton18-18/+18
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26Merge branch 'next/soc-exynos5440' of ↵Olof Johansson3-0/+925
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: This is adding support for exynos5440, including Quad ARM Cortex-A15 cores and its reference board SSDK5440. Note, at this moment, just enabled minimal system part for initial kernel boot and pinctrl driver. * 'next/soc-exynos5440' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoC ARM: dts: add initial dts file for EXYNOS5440, SSDK5440 ARM: EXYNOS: add support for EXYNOS5440 SoC Add/add conflict in arch/arm/boot/dts/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-24pinctrl: samsung: Do not initialise statics to 0Sachin Kamat1-1/+1
Static variables are initialised to 0 by GCC. Fixes the following checkpatch error: ERROR: do not initialise statics to 0 or NULL FILE: pinctrl/pinctrl-samsung.c:50: static unsigned int pin_base = 0; Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-23pinctrl: pinctrl-single: Fix error check conditionSachin Kamat1-1/+1
*map should be tested for NULL instead of map. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-23pinctrl: SPEAr: Update error check for unsigned variablesTushar Behera1-1/+1
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-22pinctrl: exynos5440: add pinctrl driver for Samsung EXYNOS5440 SoCThomas Abraham3-0/+925
Add a new pinctrl driver for Samsung EXYNOS5440 SoC. The pin controller module in EXYNOS5440 is different from the pin controller found on other Samsung SoC. Hence, the pin controller driver for EXYNOS5440 SoC is independent of the Samsung pinctrl framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21Merge branch 'samsung/pinctrl' into next/socOlof Johansson4-401/+483
From Kukjin Kim: Here is Samsung DT for v3.8 and this is including DT for EXYNOS4X12 SoC, SMDK4412 board, pinctrl for exynos4x12, TMU, MFC, SATA and SATA PHY. As I commented on [4/7], this branch merged pinctrl/samsung to support pinctrl for exynos4x12 without useless merge conflicts. * samsung/pinctrl: pinctrl: samsung: Update error check for unsigned variables pinctrl: samsung: Add support for EXYNOS4X12 Documentation: Update samsung-pinctrl device tree bindings documentation pinctrl: samsung: Add GPIO to IRQ translation pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts pinctrl: samsung: Use one GPIO chip per pin bank pinctrl: exynos: Use one IRQ domain per pin bank pinctrl: samsung: Include bank-specific eint offset in bank struct pinctrl: samsung: Hold pointer to driver data in bank struct pinctrl: samsung: Match pin banks with their device nodes ARM: dts: exynos4210-pinctrl: Add nodes for pin banks pinctrl: samsung: Distinguish between pin group and bank nodes pinctrl: samsung: Remove static pin enumerations pinctrl: samsung: Assing pin numbers dynamically pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank pinctrl: samsung: Detect and handle unsupported configuration types
2012-11-21Merge branch 'at91' into develLinus Walleij1-1/+125
2012-11-21pinctrl: single: support gpio request and freeHaojian Zhuang1-2/+78
Marvell's PXA/MMP silicon also match the behavior of pinctrl-single. Each pin binds to one register. A lot of pins could be configured as gpio. GPIO range is defined as a child node of pinmux in .dtsi file. If those pins are with the same gpio function configuration in the pinmux register, they could be defined in the same GPIO range. For this new child node, two properties are used. reg = <the start of pinmux register in range, size of range> pinctrl-single,gpio: <gpio base in range, the gpio function of the range in the pinmux register> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: generic: add input schmitt disable parameterHaojian Zhuang1-0/+1
In Marvell PXA/MMP silicons, input schmitt disable value is 0x40, not 0. So append new config parameter -- input schmitt disable. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl/u300/coh901: stop spawning pinctrl from GPIOLinus Walleij1-6/+0
Let's stop spawning the pinctrl driver from the GPIO driver, we have these two mechanisms broken apart now, and they can each probe in isolation. If the GPIO driver cannot find its pin controller (pinctrl-u300), the pin controller core will tell it to defer probing. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl/u300/coh901: let the gpio_chip register the rangeLinus Walleij2-53/+49
Instead of having the pinctrl driver register the GPIO range for the gpio_chip, making it necessary to instantiate the pin controller from the GPIO driver and pass the GPIO chip as platform data, now let the GPIO chip driver register it's own ranges and have the pinctrl driver look up the GPIO chip from the pinctrl core as necessary. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: add function to retrieve range from pinLinus Walleij1-0/+24
This adds a function to the pinctrl core to retrieve the GPIO range associated with a certain pin for a certain controller. This is needed when a pinctrl driver want to look up the corresponding struct gpio_chip for a certain pin. As the GPIO drivers can now create these ranges themselves, the pinctrl driver no longer knows about all its associated GPIO chips. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl: make range registration defer properlyLinus Walleij1-1/+6
This makes the pinctrl_find_and_add_gpio_range() return -EPROBE_DEFER if the range hosting pin controller cannot be located. We may assume that the common case for why adding a range fails is that the targe pin controller device has not probed yet. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21gpiolib: rename find_pinctrl_*Linus Walleij1-2/+2
Rename the function find_pinctrl_and_add_gpio_range() to pinctrl_find_and_add_gpio_range() so as to be consistent with the rest of the functions. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21Merge branch 'delivery/pinctrl-at91-3.8' of ↵Linus Walleij1-1/+125
http://github.com/at91linux/linux-at91 into at91
2012-11-19pinctrl: samsung: Update error check for unsigned variablesTushar Behera1-1/+1
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19pinctrl: samsung: Add support for EXYNOS4X12Tomasz Figa3-0/+113
This patch extends the driver with any necessary SoC-specific definitions to support EXYNOS4X12 SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-19Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsungKukjin Kim4-400/+369
2012-11-19pinctrl: at91 add deglitch, debounce, pull down and schmitt trigger mux ↵Jean-Christophe PLAGNIOL-VILLARD1-0/+111
option support add : set_deglitch: enable/disable deglitch set_debounce: enable/disable debounce set_pulldown: enable/disable pulldown disable_schmitt_trig: disable schmitt trigger Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-19pinctrl: at91: provide gpio namesJean-Christophe PLAGNIOL-VILLARD1-1/+14
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-15pinctrl: nomadik: Staticize non-exported symbolsAxel Lin1-14/+12
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: nomadik: Prevent NULL dereference if of_match_device returns NULLAxel Lin1-3/+8
of_match_device() may return NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: single: dump pinmux register valueHaojian Zhuang1-4/+4
Dump pinmux register value, not only function part in the pinmux register. Also fix the issue on caluclating pin offset. The last parameter should be pin number, not register offset. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15Pinctrl/spear: plgpio: don't call prepare/unprepareViresh Kumar1-4/+15
SPEAr SoC's don't do anything in clk_prepare() of plgpio driver, so there is no need to call this routine multiple times. Just call it once at probe. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: plgpio: Call clk_disable_unprepare only if clk_prepare_enable is calledAxel Lin1-1/+2
This driver allows clk_get() failure, and still work without it. This patch adds !IS_ERR(plgpio->clk) checking in plgpio_request() error path so we only call clk_disable_unprepare() if clk_prepare_enable() is called. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: spear: Make get_gpio_pingroup return NULL when no gpio_pingroup foundAxel Lin1-3/+3
Currently get_gpio_pingroup() may return NULL or ERR_PTR(-EINVAL) when no gpio_pingroup found. The caller in gpio_request_endisable() only checks if the return value is NULL. Return ERR_PTR(-EINVAL) for get_gpio_pingroup() causes problem and seems not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: coh901: Return proper error if irq_domain_add_linear() failsAxel Lin1-2/+4
Return -ENOMEM instead of 0 if irq_domain_add_linear fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: spear: Fix the logic of setting reg in pmx_init_gpio_pingroup_addrAxel Lin1-3/+3
Current code does not work if count > 1, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: imx: Fix the logic checking if not able to find pin reg mapAxel Lin1-1/+1
Current code sets "pin_reg = &info->pin_regs[i];" in each loop iteration, so in the case of no-match, pin_reg is not NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/samsung: don't allow enabling pinctrl-samsung standaloneArnd Bergmann1-1/+1
The main samsung pinctrl module references the specific exynos4210 pinctrl driver, which selects the main driver in Kconfig. Making the main driver a silent "bool" option avoid this potential build error if CONFIG_PINCTRL_SAMSUNG=y && CONFIG_PINCTRL_EXYNOS4=n: drivers/built-in.o:(.rodata+0x4e4): undefined reference to `exynos4210_pin_ctrl' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: tegra: Staticize non-exported symbolsAxel Lin1-10/+12
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/nomadik: db8540: split clkout groupPatrice Chotard1-5/+10
The clkout group is split into groups clkout1 and clkout2 which allows pins cklkout1 and clkout2 to be muxed separately. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl/nomadik: db8500: split clkout groupPatrice Chotard1-7/+14
The clkout group is split into groups clkout1 and clkout2 which allows pins cklkout1 and clkout2 to be muxed separately. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: pxa3xx: Remove phy_base and phy_size from struct pxa3xx_pinmux_infoAxel Lin2-4/+0
They are not used, remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: pxa3xx: Use devm_request_and_ioremapAxel Lin1-8/+2
Use managed resources API to simplify the code. Also ensure we do request mem_region before ioremap. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: tegra: Make PINCTRL_TEGRA select PINMUX && PINCONFAxel Lin1-4/+2
Then we can remove "select PINMUX && PINCONF" from PINCTRL_TEGRA{20,30}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13pinctrl: mxs: Make PINCTRL_MXS select PINMUX && PINCONFAxel Lin1-4/+2
Then we can remove "select PINMUX && PINCONF" from PINCTRL_IMX{23,28}. This simplifies the dependency. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-13pinctrl: spear: Staticize non-exported symbolsAxel Lin1-5/+7
They are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: pinmux: Release all taken pins in pinmux_enable_setting error pathsAxel Lin1-7/+21
Currently pinmux_enable_setting does not release all taken pins if ops->enable() returns error. This patch ensures all taken pins are released in any error paths. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: lantiq: Staticize non-exported symbolsAxel Lin1-6/+6
Both ltq_pinctrl_dt_node_to_map() and ltq_pinctrl_dt_free_map() are not referenced outside of this file. Make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl: lantiq: Remove ltq_pmx_disable() functionAxel Lin1-11/+0
Current code adds empty ltq_pmx_disable() because pinmux_check_ops() requires this callback to be defined. This is not required since commit 02b50ce4cb1 "pinctrl: make pinmux disable function optional". Thus remove ltq_pmx_disable() function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 14:49:07 +0300