summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
10 daystreewide: rename pinctrl_gpio_direction_output_new()Bartosz Golaszewski20-43/+51
[ Upstream commit b679d6c06b2b29187374f9f4da7eea1961c2eeaa ] Now that pinctrl_gpio_direction_output() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: d3e91a95b2b0 ("gpio: tegra: do not call pinctrl for GPIO direction") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
14 dayspinctrl: renesas: rzg2l: Use -ENOTSUPP instead of -EOPNOTSUPPClaudiu Beznea1-2/+2
commit c1492da3939c89372929e062d731f328f7693f1e upstream. The pinctrl and GPIO core code make exceptions for the -ENOTSUPP error code. One such example is gpio_set_config_with_argument_optional(), which returns success when gpio_set_config_with_argument() returns -ENOTSUPP, but reports failure for all other error codes. Returning -EOPNOTSUPP from the pinctrl driver on the unsupported pinctrl operation may lead to boot failures when pinctrl drivers implements struct gpio_chip::set_config, the system uses GPIO hogs, and the struct gpio_chip::set_config implementation returns -EOPNOTSUPP for the unsupported operations. Return -ENOTSUPP for the unsupported pinctrl operation. Fixes: 560c633d378a ("pinctrl: renesas: rzg2l: Drop oen_read and oen_write callbacks") Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260515124008.2947838-2-claudiu.beznea@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [claudiu.beznea: fixed conflict by dropping the code not present in v5.15 stable] Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
14 dayspinctrl: bm1880: add missing select GENERIC_PINCONFBenjamin Boortz1-0/+1
commit dad6e107b3cd9d20514e7799b7ad8674f81e3f30 upstream. drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with .is_generic = true, but that field is only present when CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h). The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF, so any config that enables CONFIG_PINCTRL_BM1880=y without CONFIG_GENERIC_PINCONF=y fails to compile: drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic' Found by randconfig testing on arm64; tinyconfig reproducer below. Add the missing select to fix the build. Fixes: 49bd61ebce5f ("pinctrl: Add pinconf support for BM1880 SoC") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Boortz <bennib@mailbox.org> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
14 dayspinctrl: devicetree: don't free uninitialized dev_name on error pathKarl Mehltretter1-0/+4
commit 015b5bcbcb622b32317642be91a7f79aa5413649 upstream. dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctrl-consuming device, under KASAN: BUG: KASAN: double-free in dt_free_map+0x34/0xa4 Free of addr c425a900 by task init/1 kfree from dt_free_map+0x34/0xa4 dt_free_map from dt_remember_or_free_map+0x184/0x198 dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8 pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0 Initialize all dev_name fields to NULL before duplicating the device name, making the full-map cleanup safe after a partial failure. Fixes: be4c60b563ed ("pinctrl: devicetree: Avoid taking direct reference to device name string") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-fable-5 Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-07-24pinctrl: mediatek: mt8167: Fix Schmitt trigger register offset of pins 34-39Luca Leonardo Scorcia1-1/+1
[ Upstream commit 439bc91d20188901dac698bed4921caac76d9074 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Value was verified with SoC data sheet. Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com> Fixes: 82d70627e94a ("pinctrl: mediatek: Add MT8167 Pinctrl driver") Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-07-24pinctrl: mediatek: mt8516: Fix Schmitt trigger register offset of pins 34-39Luca Leonardo Scorcia1-1/+1
[ Upstream commit 1c3044cab23a056ea28da47da1cdd667a39df0b8 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com> Fixes: 264667112ef0 ("pinctrl: mediatek: Add MT8516 Pinctrl driver") Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-07-24pinctrl: sunxi: fix regulator leak in sunxi_pmx_request() error pathFelix Gu1-1/+1
[ Upstream commit 334f7bcbdc79dc8e5b938ac3372453a5368221cf ] In the error path of sunxi_pmx_request(), the code calls regulator_put(s_reg->regulator) to release the regulator. However, s_reg->regulator is only assigned after a successful regulator_enable(). This causes a memory leak: the regulator obtained via regulator_get() is never properly released when regulator_enable() fails. Fixes: dc1445584177 ("pinctrl: sunxi: Fix and simplify pin bank regulator handling") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01pinctrl: abx500: Fix type of 'argument' variableYu-Chun Lin1-1/+1
[ Upstream commit 34006f77890d050e6d80cbee365b5d703c1140b4 ] The argument variable is assigned the return value of pinconf_to_config_argument(), which returns a u32. Change its type from enum pin_config_param to unsigned int to correctly store the configuration argument. Fixes: 03b054e9696c ("pinctrl: Pass all configs to driver on pin_config_set()") Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01pinctrl: pinctrl-pic32: Fix resource leakEthan Tidmore1-16/+4
[ Upstream commit fe5560688f3ba98364c7de7b4f8dc240ffd1ff75 ] Fix three possible resource leaks by using the devres version of clk_prepare_enable(). Also, update error message accordingly. Detected by Smatch: drivers/pinctrl/pinctrl-pic32.c:2211 pic32_pinctrl_probe() warn: 'pctl->clk' from clk_prepare_enable() not released on lines: 2208. drivers/pinctrl/pinctrl-pic32.c:2274 pic32_gpio_probe() warn: 'bank->clk' from clk_prepare_enable() not released on lines: 2264,2272. Fixes: 2ba384e6c3810 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver") Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-06-01pinctrl: intel: Fix the revision for new features (1kOhm PD, HW debouncer)Andy Shevchenko1-1/+1
[ Upstream commit a4337a24d13e9e3b98a113e71d6b80dc5ed5f8c4 ] The 1kOhm pull down and hardware debouncer are features of the revision 0.92 of the Chassis specification. Fix that in the code accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18pinctrl: mediatek: common: Fix probe failure for devices without EINTLuca Leonardo Scorcia1-3/+6
[ Upstream commit 8f9f64c8f90dca07d3b9f1d7ce5d34ccd246c9dd ] Some pinctrl devices like mt6397 or mt6392 don't support EINT at all, but the mtk_eint_init function is always called and returns -ENODEV, which then bubbles up and causes probe failure. To address this only call mtk_eint_init if EINT pins are present. Tested on Xiaomi Mi Smart Clock x04g (mt6392). Fixes: e46df235b4e6 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit") Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: single: fix refcount leak in pcs_add_gpio_func()Wei Li1-0/+2
[ Upstream commit 353353309b0f7afa407df29e455f9d15b5acc296 ] of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review. Fixes: a1a277eb76b3 ("pinctrl: single: create new gpio function range") Signed-off-by: Wei Li <unsw.weili@gmail.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definitionLuca Weiss1-1/+1
[ Upstream commit eabf273c8466af3f033473c2d2267a6ea7946d57 ] The i2s2_data function is available on both gpio12 and gpio13. Fix the groups definition. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: qcom: Extract chip specific LPASS LPI codeSrinivasa Rao Mandadapu5-228/+263
[ Upstream commit 9ce49018c6928263d41b783c9e4928c6af05db43 ] Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver to allow reusing the common code in the addition of subsequent platforms. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1650285427-19752-6-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: eabf273c8466 ("pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: qcom: Update lpi pin group custiom functions with framework generic ↵Srinivasa Rao Mandadapu2-51/+52
functions [ Upstream commit be73368d535614b351c13a10680b4cdd06db2417 ] Update custom pin group structure members with framework generic group_desc structure and replace the driver's custom pinctrl_ops with framework provided generic pin control group functions to avoid redundant code written in lpass lpi driver. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1650285427-19752-5-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: eabf273c8466 ("pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: qcom: Update macro name to LPI specificSrinivasa Rao Mandadapu1-8/+8
[ Upstream commit 6454711015267fe38b6f05aba232e01be2cb9693 ] Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1650285427-19752-4-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: eabf273c8466 ("pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04pinctrl: equilibrium: Fix device node reference leak in pinbank_init()Felix Gu1-0/+1
[ Upstream commit c0b4a4feeb43305a754893d8d9c6b2b5a52d45ac ] When calling of_parse_phandle_with_fixed_args(), the caller is responsible to call of_node_put() to release the reference of device node. In pinbank_init(), the reference of the node obtained from the "gpio-ranges" property is never released, resulting in a reference count leak. Add the missing of_node_put() call to fix the leak. Fixes: 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06pinctrl: meson: mark the GPIO controller as sleepingBartosz Golaszewski1-1/+1
[ Upstream commit 28f24068387169722b508bba6b5257cb68b86e74 ] The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 142, name: kworker/u25:3 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 46379 hardirqs last enabled at (46379): [<ffff8000813acb24>] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (46378): [<ffff8000813abf38>] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (46330): [<ffff8000800c71b4>] handle_softirqs+0x4c4/0x4dc softirqs last disabled at (46295): [<ffff800080010674>] __do_softirq+0x14/0x20 CPU: 1 UID: 0 PID: 142 Comm: kworker/u25:3 Tainted: G C 6.19.0-rc4-next-20260105+ #11963 PREEMPT Tainted: [C]=CRAP Hardware name: Khadas VIM3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_set_config+0x40/0xdc gpiochip_generic_config+0x28/0x3c gpio_do_set_config+0xa8/0x194 gpiod_set_config+0x34/0xfc gpio_shared_proxy_set_config+0x6c/0xfc [gpio_shared_proxy] gpio_do_set_config+0xa8/0x194 gpiod_set_transitory+0x4c/0xf0 gpiod_configure_flags+0xa4/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get+0x18/0x24 mmc_pwrseq_emmc_probe+0x40/0xb8 platform_probe+0x5c/0xac really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0xdc/0x164 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x80/0xdc __device_attach+0xa8/0x1b0 Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linusw@kernel.org> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06pinctrl: lpass-lpi: implement .get_direction() for the GPIO driverBartosz Golaszewski1-0/+17
[ Upstream commit 4f0d22ec60cee420125f4055af76caa0f373a3fe ] GPIO controller driver should typically implement the .get_direction() callback as GPIOLIB internals may try to use it to determine the state of a pin. Add it for the LPASS LPI driver. Reported-by: Abel Vesa <abelvesa@kernel.org> Cc: stable@vger.kernel.org Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Linus Walleij <linusw@kernel.org> [ PIN_CONFIG_LEVEL => PIN_CONFIG_OUTPUT ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleepingBartosz Golaszewski1-1/+1
[ Upstream commit ebc18e9854e5a2b62a041fb57b216a903af45b85 ] The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable@vger.kernel.org Reported-by: Val Packett <val@packett.cool> Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19pinctrl: qcom: lpass-lpi: Remove duplicate assignment of of_gpio_n_cellsAndy Shevchenko1-1/+0
[ Upstream commit a3fc976a2d68cb74ae4234314002e4e398e4c337 ] The of_gpio_n_cells default is 2 when ->of_xlate() callback is not defined. No need to assign it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: ebc18e9854e5 ("pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19pinctrl: single: Fix incorrect type for error return variableHaotian Zhang1-3/+4
[ Upstream commit 61d1bb53547d42c6bdaec9da4496beb3a1a05264 ] pcs_pinconf_get() and pcs_pinconf_set() declare ret as unsigned int, but assign it the return values of pcs_get_function() that may return negative error codes. This causes negative error codes to be converted to large positive values. Change ret from unsigned int to int in both functions. Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19pinctrl: single: Fix PIN_CONFIG_BIAS_DISABLE handlingMatthijs Kooijman1-6/+12
[ Upstream commit b5fe46efc147516a908d2d31bf40eb858ab76d51 ] The pinctrl-single driver handles pin_config_set by looking up the requested setting in a DT-defined lookup table, which defines what bits correspond to each setting. There is no way to add PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead code to disable the bias by applying the disable values of both the pullup and pulldown entries in the table. However, this code is inside the table-lookup loop, so it would only execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table, which can never exist, so this code never runs. This commit lifts the offending code out of the loop, so it just executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested, skippipng the table lookup loop. This also introduces a new `param` variable to make the code slightly more readable. This bug seems to have existed when this code was first merged in commit 9dddb4df90d13 ("pinctrl: single: support generic pinconf"). Earlier versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in the lookup table, but that was removed, which is probably how this bug was introduced. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <20240319110633.230329-1-matthijs@stdin.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 61d1bb53547d ("pinctrl: single: Fix incorrect type for error return variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19pinctrl: stm32: fix hwspinlock resource leak in probe functionHaotian Zhang1-1/+1
[ Upstream commit 002679f79ed605e543fbace465557317cd307c9a ] In stm32_pctl_probe(), hwspin_lock_request_specific() is called to request a hwspinlock, but the acquired lock is not freed on multiple error paths after this call. This causes resource leakage when the function fails to initialize properly. Use devm_hwspin_lock_request_specific() instead of hwspin_lock_request_specific() to automatically manage the hwspinlock resource lifecycle. Fixes: 97cfb6cd34f2 ("pinctrl: stm32: protect configuration registers with a hwspinlock") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19pinctrl: qcom: msm: Fix deadlock in pinmux configurationPraveen Talari1-1/+1
[ Upstream commit 1c2e70397b4125022dba80f6111271a37fb36bae ] Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux() to prevent deadlock when wakeup IRQ is triggered on the same GPIO being reconfigured. The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ handler attempts to reconfigure the same GPIO's pinmux. In this scenario, msm_pinmux_set_mux() calls disable_irq() which waits for the currently running IRQ handler to complete, creating a circular dependency that results in deadlock. Using disable_irq_nosync() avoids waiting for the IRQ handler to complete, preventing the deadlock condition while still properly disabling the interrupt during pinmux reconfiguration. Suggested-by: Prasad Sodagudi <prasad.sodagudi@oss.qualcomm.com> Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07pinctrl: single: fix bias pull up/down handling in pin_config_setChi Zhang1-1/+3
[ Upstream commit 236152dd9b1675a35eee912e79e6c57ca6b6732f ] In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias() which writes the register. However, the subsequent operations continue using the stale 'data' value from before the register write, effectively causing the bias clear operation to be overwritten and not take effect. Fix this by reading the 'data' value from the register after calling pcs_pinconf_clear_bias(). This bug seems to have existed when this code was first merged in commit 9dddb4df90d1 ("pinctrl: single: support generic pinconf"). Signed-off-by: Chi Zhang <chizhang@asrmicro.com> Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19pinctrl: check the return value of pinmux_ops::get_function_name()Bartosz Golaszewski1-1/+1
commit 4002ee98c022d671ecc1e4a84029e9ae7d8a5603 upstream. While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. Cc: stable@vger.kernel.org Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-19pinctrl: renesas: Use int type to store negative error codesQianfeng Rong1-1/+2
[ Upstream commit 9f062fc5b0ff44550088912ab89f9da40226a826 ] Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned int to int, as it needs to store either negative error codes or zero returned by sh_pfc_pinconf_set(). No effect on runtime. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Fixes: d0593c363f04ccc4 ("pinctrl: sh-pfc: Propagate errors on group config") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19pinctrl: meson-gxl: add missing i2c_d pinmuxDa Xue1-0/+10
[ Upstream commit d8c2a9edd181f0cc4a66eec954b3d8f6a1d954a7 ] Amlogic GXL has 4 I2C attached to gpio-periphs. I2C_D is on GPIOX_10/11. Add the relevant func 3 pinmux per the datasheet for S805X/S905X/S905D. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Da Xue <da@libre.computer> Link: https://lore.kernel.org/20250821233335.1707559-1-da@libre.computer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-04pinctrl: STMFX: add missing HAS_IOMEM dependencyRandy Dunlap1-0/+1
[ Upstream commit a12946bef0407cf2db0899c83d42c47c00af3fbc ] When building on ARCH=um (which does not set HAS_IOMEM), kconfig reports an unmet dependency caused by PINCTRL_STMFX. It selects MFD_STMFX, which depends on HAS_IOMEM. To stop this warning, PINCTRL_STMFX should also depend on HAS_IOMEM. kconfig warning: WARNING: unmet direct dependencies detected for MFD_STMFX Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y] Selected by [y]: - PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y] Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/20250815022721.1650885-1-rdunlap@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28pinctrl: stm32: Manage irq affinity settingsCheick Traore1-0/+1
[ Upstream commit 4c5cc2f65386e22166ce006efe515c667aa075e4 ] Trying to set the affinity of the interrupts associated to stm32 pinctrl results in a write error. Fill struct irq_chip::irq_set_affinity to use the default helper function. Signed-off-by: Cheick Traore <cheick.traore@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250610143042.295376-3-antonio.borneo@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28pinctrl: sunxi: Fix memory leak on krealloc failureYuan Chen1-3/+8
[ Upstream commit e3507c56cbb208d4f160942748c527ef6a528ba1 ] In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize the pinctrl_map array, the function returns -ENOMEM directly without freeing the previously allocated *map buffer. This results in a memory leak of the original kmalloc_array allocation. Fixes: e11dee2e98f8 ("pinctrl: sunxi: Deal with configless pins") Signed-off-by: Yuan Chen <chenyuan@kylinos.cn> Link: https://lore.kernel.org/20250620012708.16709-1-chenyuan_fl@163.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28pinctrl: mediatek: moore: check if pin_desc is valid before useSam Shih1-0/+18
[ Upstream commit d8b94c9ff96c2024a527086d850eb0b314337ff9 ] Certain SoC are missing the middle part gpios in consecutive pins, it's better to check if mtk_pin_desc is a valid pin for the extensibility Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Link: https://lore.kernel.org/r/20210914085137.31761-5-sam.shih@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 705c79101ccf ("smb: client: fix use-after-free in cifs_oplock_break") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17pinctrl: qcom: msm: mark certain pins as invalid for interruptsBartosz Golaszewski1-0/+20
commit 93712205ce2f1fb047739494c0399a26ea4f0890 upstream. On some platforms, the UFS-reset pin has no interrupt logic in TLMM but is nevertheless registered as a GPIO in the kernel. This enables the user-space to trigger a BUG() in the pinctrl-msm driver by running, for example: `gpiomon -c 0 113` on RB2. The exact culprit is requesting pins whose intr_detection_width setting is not 1 or 2 for interrupts. This hits a BUG() in msm_gpio_irq_set_type(). Potentially crashing the kernel due to an invalid request from user-space is not optimal, so let's go through the pins and mark those that would fail the check as invalid for the irq chip as we should not even register them as available irqs. This function can be extended if we determine that there are more corner-cases like this. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27pinctrl: mcp23s08: Reset all pins to input at probeMike Looijmans1-0/+8
[ Upstream commit 3ede3f8b4b4b399b0ca41e44959f80d5cf84fc98 ] At startup, the driver just assumes that all registers have their default values. But after a soft reset, the chip will just be in the state it was, and some pins may have been configured as outputs. Any modification of the output register will cause these pins to be driven low, which leads to unexpected/unwanted effects. To prevent this from happening, set the chip's IO configuration register to a known safe mode (all inputs) before toggling any other bits. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Link: https://lore.kernel.org/20250314151803.28903-1-mike.looijmans@topic.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()Gabor Juhos1-1/+4
[ Upstream commit 57273ff8bb16f3842c2597b5bbcd49e7fa12edf7 ] The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-4-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()Gabor Juhos1-3/+4
[ Upstream commit bfa0ff804ffa8b1246ade8be08de98c9eb19d16f ] The armada_37xx_gpio_direction_{in,out}put() functions can fail, so propagate their error values back to the stack instead of silently ignoring those. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-5-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()Gabor Juhos1-1/+4
[ Upstream commit 6481c0a83367b0672951ccc876fbae7ee37b594b ] The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-6-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()Gabor Juhos1-3/+1
[ Upstream commit 4229c28323db141eda69cb99427be75d3edba071 ] The regmap_update_bits() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-7-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: at91: Fix possible out-of-boundary accessAndy Shevchenko1-1/+5
[ Upstream commit 762ef7d1e6eefad9896560bfcb9bcf7f1b6df9c1 ] at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks. Fixes: 6732ae5cb47c ("ARM: at91: add pinctrl support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/ Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: set GPIO output value before setting directionGabor Juhos1-8/+7
commit e6ebd4942981f8ad37189bbb36a3c8495e21ef4c upstream. Changing the direction before updating the output value in the OUTPUT_VAL register may result in a glitch on the output line if the previous value in the OUTPUT_VAL register is different from the one we want to set. In order to avoid that, update the output value before changing the direction. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31Gabor Juhos1-0/+3
commit 947c93eb29c2a581c0b0b6d5f21af3c2b7ff6d25 upstream. The controller has two consecutive OUTPUT_VAL registers and both holds output value for 32 GPIOs. Due to a missing adjustment, the current code always uses the first register while setting the output value whereas it should use the second one for GPIOs > 31. Add the missing armada_37xx_update_reg() call to adjust the register according to the 'offset' parameter of the function to fix the issue. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04pinctrl: meson: define the pull up/down resistor value as 60 kOhmMartin Blumenstingl1-1/+1
[ Upstream commit e56088a13708757da68ad035269d69b93ac8c389 ] The public datasheets of the following Amlogic SoCs describe a typical resistor value for the built-in pull up/down resistor: - Meson8/8b/8m2: not documented - GXBB (S905): 60 kOhm - GXL (S905X): 60 kOhm - GXM (S912): 60 kOhm - G12B (S922X): 60 kOhm - SM1 (S905D3): 60 kOhm The public G12B and SM1 datasheets additionally state min and max values: - min value: 50 kOhm for both, pull-up and pull-down - max value for the pull-up: 70 kOhm - max value for the pull-down: 130 kOhm Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality 60 kOhm is closer to the actual value than 1 Ohm. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: devicetree: do not goto err when probing hogs in pinctrl_dt_to_mapValentin Caron1-2/+8
[ Upstream commit c98868e816209e568c9d72023ba0bc1e4d96e611 ] Cross case in pinctrl framework make impossible to an hogged pin and another, not hogged, used within the same device-tree node. For example with this simplified device-tree : &pinctrl { pinctrl_pin_1: pinctrl-pin-1 { pins = "dummy-pinctrl-pin"; }; }; &rtc { pinctrl-names = "default" pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1> rtc_pin_1: rtc-pin-1 { pins = "dummy-rtc-pin"; }; }; "pinctrl_pin_1" configuration is never set. This produces this path in the code: really_probe() pinctrl_bind_pins() | devm_pinctrl_get() | pinctrl_get() | create_pinctrl() | pinctrl_dt_to_map() | // Hog pin create an abort for all pins of the node | ret = dt_to_map_one_config() | | /* Do not defer probing of hogs (circular loop) */ | | if (np_pctldev == p->dev->of_node) | | return -ENODEV; | if (ret) | goto err | call_driver_probe() stm32_rtc_probe() pinctrl_enable() pinctrl_claim_hogs() create_pinctrl() for_each_maps(maps_node, i, map) // Not hog pin is skipped if (pctldev && strcmp(dev_name(pctldev->dev), map->ctrl_dev_name)) continue; At the first call of create_pinctrl() the hogged pin produces an abort to avoid a defer of hogged pins. All other pin configurations are trashed. At the second call, create_pinctrl is now called with pctldev parameter to get hogs, but in this context only hogs are set. And other pins are skipped. To handle this, do not produce an abort in the first call of create_pinctrl(). Classic pin configuration will be set in pinctrl_bind_pins() context. And the hogged pin configuration will be set in pinctrl_claim_hogs() context. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"Artur Weber1-22/+22
[ Upstream commit 07b5a2a13f4704c5eae3be7277ec54ffdba45f72 ] Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch warnings. No functional change. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-2-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02pinctrl: qcom: Clear latched interrupt status when changing IRQ typeStephan Gerhold1-6/+6
commit e225128c3f8be879e7d4eb71a25949e188b420ae upstream. When submitting the TLMM test driver, Bjorn reported that some of the test cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup" GPIOs that are handled directly in pinctrl-msm). Basically, lingering latched interrupt state is still being delivered at IRQ request time, e.g.: ok 1 tlmm_test_silent_rising tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178 Expected atomic_read(&priv->intr_count) == 0, but atomic_read(&priv->intr_count) == 1 (0x1) not ok 2 tlmm_test_silent_falling tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178 Expected atomic_read(&priv->intr_count) == 0, but atomic_read(&priv->intr_count) == 1 (0x1) not ok 3 tlmm_test_silent_low ok 4 tlmm_test_silent_high Whether to report interrupts that came in while the IRQ was unclaimed doesn't seem to be well-defined in the Linux IRQ API. However, looking closer at these specific cases, we're actually reporting events that do not match the interrupt type requested by the driver: 1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and configured for IRQF_TRIGGER_RISING. 2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched to high state. The rising interrupt gets latched. (b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched interrupt isn't cleared. (c) The IRQ handler is called for the latched interrupt, but there wasn't any falling edge. 3. (a) For "tlmm_test_silent_low", the GPIO remains in high state. (b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to result in a phantom interrupt that gets latched. (c) The IRQ handler is called for the latched interrupt, but the GPIO isn't in low state. 4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state. (b) This doesn't result in a latched interrupt, because RAW_STATUS_EN was cleared when masking the level-triggered interrupt. Fix this by clearing the interrupt state whenever making any changes to the interrupt configuration. This includes previously disabled interrupts, but also any changes to interrupt polarity or detection type. With this change, all 16 test cases are now passing for the non-wakeup GPIOs in the TLMM. Cc: stable@vger.kernel.org Fixes: cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts when enabling") Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/ Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10pinctrl: tegra: Set SFIO mode to Mux RegisterPrathamesh Shete1-0/+3
[ Upstream commit 17013f0acb322e5052ff9b9d0fab0ab5a4bfd828 ] Tegra devices have an 'sfsel' bit field that determines whether a pin operates in SFIO (Special Function I/O) or GPIO mode. Currently, tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO. However, tegra_pinctrl_set_mux() can be called independently in certain code paths where gpio_disable_free() is not invoked. In such cases, failing to set the SFIO mode could lead to incorrect pin configurations, resulting in functional issues for peripherals relying on SFIO. This patch ensures that whenever set_mux() is called, the SFIO mode is correctly set in the Mux Register if the 'sfsel' bit is present. This prevents situations where the pin remains in GPIO mode despite being configured for SFIO use. Fixes: 971dac7123c7 ("pinctrl: add a driver for NVIDIA Tegra") Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/20250306050542.16335-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: renesas: rzg2l: Fix missing of_node_put() callFabrizio Castro1-0/+2
[ Upstream commit a5779e625e2b377f16a6675c432aaf299ce5028c ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250305163753.34913-3-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: renesas: rza2: Fix missing of_node_put() callFabrizio Castro1-0/+2
[ Upstream commit abcdeb4e299a11ecb5a3ea0cce00e68e8f540375 ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250305163753.34913-5-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: bcm281xx: Fix incorrect regmap max_registers valueArtur Weber1-1/+1
[ Upstream commit 68283c1cb573143c0b7515e93206f3503616bc10 ] The max_registers value does not take into consideration the stride; currently, it's set to the number of the last pin, but this does not accurately represent the final register. Fix this by multiplying the current value by 4. Fixes: 54b1aa5a5b16 ("ARM: pinctrl: Add Broadcom Capri pinctrl driver") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250207-bcm21664-pinctrl-v1-2-e7cfac9b2d3b@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-02 08:28:35 +0300