summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2014-04-02Merge tag 'pinctrl-v3.15-1' of ↵Linus Torvalds40-4653/+3167
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk changes from Linus Walleij: "Pin control bulk changes for the v3.15 series, no new core functionality this time, just incremental driver updates: - A large refactoring of the MVEBU (Marvell) driver. - A large refactoring of the Tegra (nVidia) driver. - GPIO interrupt including soft edges support in the STi driver. - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin), pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi (AllWinner), i.MX (Freescale), Baytrail" * tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: tegra: add some missing Tegra114 entries pinctrl: tegra: fix some mistakes in Tegra124 pinctrl: msm: fix up out-of-order merge conflict pinctrl: st: Fix error check for of_irq_to_resource usage pinctrl: tegra: consistency cleanup pinctrl: tegra: dynamically calculate function list of groups pinctrl: tegra: init Tegra20/30 at module_init time pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays pinctrl: st: add pinctrl support for the STiH407 SoC pinctrl: st: Enhance the controller to manage unavailable registers pinctrl: msm: Simplify msm_config_reg() and callers pinctrl: msm: Remove impossible WARN_ON()s pinctrl: msm: Replace lookup tables with math pinctrl: msm: Drop OF_IRQ dependency pinctrl: msm: Drop unused includes pinctrl: msm: Check for ngpios > MAX_NR_GPIO pinctrl: msm: Silence recursive lockdep warning pinctrl: mvebu: silence WARN to dev_warn pinctrl: msm: drop wake_irqs bitmap pinctrl-baytrail: add function mux checking in gpio pin request ...
2014-03-14pinctrl: tegra: add some missing Tegra114 entriesStephen Warren1-29/+90
Add some missing pin and drive group definitions to the driver. These are all defined in the TRM, but missing from the driver for some reason. Fix a couple of mistakes in the drive group definitions. Much of the diff to tegra114_groups[] is an indentation change due to one of the new group names being long. git diff/show -w will highlight this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14pinctrl: tegra: fix some mistakes in Tegra124Stephen Warren1-5/+5
A couple of pairs of pin group names were swapped in the table. This caused the wrong register to be programmed. Luckily, this had little effect, if any, since the swapped pins were likely to be programmed identically. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14pinctrl: msm: fix up out-of-order merge conflictLinus Walleij1-1/+0
Commit 051a58b4622f0e1b732acb750097c64bc00ddb93 "pinctrl: msm: Simplify msm_config_reg() and callers" removed the local "reg" variable in the msm_config_reg() function, but the earlier commit ed118a5fd951bd2def8249ee251842c4f81fe4bd "pinctrl-msm: Support output-{high,low} configuration" introduced a new switchclause using it. Fix this up by removing the offending register assignment. Reported-by: Kbuild test robot <fengguang.wu@intel.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: st: Fix error check for of_irq_to_resource usageSrinivas Kandagatla1-1/+1
This patch fixes an error check while using of_irq_to_resource. of_irq_to_resource returns non-zero interrupt number on success and zero on error. The driver was using error check is wrong way. Without this patch the driver will configure interrupt zero if there is no interrupt specified in the node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: consistency cleanupStephen Warren3-98/+93
Fix Tegra30/114/124 pinmux drivers consistency issues. * Sort all lists of the same object type (e.g. #defines for pins, and the array that defines their names) in the same order. * Whitespace fixes. * Consistency in layout between the 3 drivers. These driver files were also auto-generated, which should allow us to make e.g. the U-Boot drivers completely consistent with the kernel in the future:-) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: dynamically calculate function list of groupsStephen Warren6-3900/+44
The per-SoC data structures for Tegra pinctrl stored some information in a redundant way. Specifically, the list of groups that each function could be muxed onto was stored once explicitly, and also as part of the definition of each group. Eliminate this redundancy, and calculate each function's list of valid groups at pinctrl probe time. This removes thousands of lines of code from the pinctrl driver and ~16K from the vmlinux binary size, and adds only about 500uS to the boot process (on Tegra30; newer SoCs will likely be faster still). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: tegra: init Tegra20/30 at module_init timeStephen Warren2-24/+2
The Tegra20/30 pinctrl drivers currently initializes at arch_initcall, whereas Tegra114/124 pinctrl drivers initialize at module_init time. Convert Tegra20/30 to work the same way as the other drivers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delaysMaxime COQUELIN1-2/+2
This patch replaces the raw values with ARRAY_SIZE for assigning the ninput_delays and noutput_delays fields of STiH416's st_pctl_data struct. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: st: add pinctrl support for the STiH407 SoCGiuseppe Cavallaro1-0/+17
This patch adds the initial support for pinctrl based on H407 SoC. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: st: Enhance the controller to manage unavailable registersGiuseppe Cavallaro1-43/+61
This patch adds a new logic inside the st pinctrl to manage an unsupported scenario: some sysconfig are not available! This is the case of STiH407 where, although documented, the following registers from SYSCFG_FLASH have been removed from the SoC. SYSTEM_CONFIG3040 Output Enable pad control for all PIO Alternate Functions and SYSTEM_ CONFIG3050 Pull Up pad control for all PIO Alternate Functions Without managing this condition an imprecise external abort will be detect. To do this the patch also reviews the st_parse_syscfgs and other routines to manipulate the registers only if actually available. In any case, for example the st_parse_syscfgs detected an error condition but no action was made in the st_pctl_probe_dt. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Simplify msm_config_reg() and callersStephen Boyd1-24/+5
We don't need to check for a negative reg here because reg is always the same and is always non-negative. Also, collapse the switch statement down for the duplicate cases. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Remove impossible WARN_ON()sStephen Boyd1-16/+0
All these functions are limited in what they can pass as the gpio or irq number to whatever is setup during probe. Remove the checks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Replace lookup tables with mathStephen Boyd1-6/+8
We don't need to waste space with these lookup tables, just do the math directly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Drop OF_IRQ dependencyStephen Boyd1-1/+1
This driver doesn't rely on any functionality living in drivers/of/irq.c to compile. Drop this dependency. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Drop unused includesStephen Boyd3-6/+1
These includes are unused or can be handled via forward declarations. Remove them. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Check for ngpios > MAX_NR_GPIOStephen Boyd1-1/+5
Fail the probe and print a warning if SoC specific drivers have more GPIOs than there can be accounted for in the static bitmaps. This should avoid silent corruption/failures in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: Silence recursive lockdep warningStephen Boyd1-0/+7
If a driver calls enable_irq_wake() on a gpio turned interrupt from the msm pinctrl driver we'll get a lockdep warning like so: ============================================= [ INFO: possible recursive locking detected ] 3.14.0-rc3 #2 Not tainted --------------------------------------------- modprobe/52 is trying to acquire lock: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by modprobe/52: #0: (&__lockdep_no_validate__){......}, at: [<c04f2864>] __driver_attach+0x48/0x98 #1: (&__lockdep_no_validate__){......}, at: [<c04f2874>] __driver_attach+0x58/0x98 #2: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 #3: (&(&pctrl->lock)->rlock){......}, at: [<c04bb4b8>] msm_gpio_irq_set_wake+0x20/0xa8 Silence it by putting the gpios into their own lock class. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: mvebu: silence WARN to dev_warnSebastian Hesselbarth1-1/+2
Pinctrl will WARN on missing DT resources, which is a little bit too noisy. Use dev_warn with FW_BUG instead. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12pinctrl: msm: drop wake_irqs bitmapJosh Cartwright1-13/+1
Currently, the wake_irqs bitmap is used to track whether there are any gpio's which are configured as wake irqs, and uses this to determine whether or not to call enable_irq_wake()/disable_irq_wake() on the summary interrupt. However, the genirq core already handles this case, by maintaining a 'wake_count' per irq_desc, and only calling into the controlling irq_chip when wake_count transitions 0 <-> 1. Drop this bitmap, and unconditionally call irq_set_irq_wake() on the summary interrupt. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-11pinctrl-baytrail: add function mux checking in gpio pin requestChew, Kean Ho1-3/+39
The requested gpio pin must has the func_pin_mux field set to GPIO function by BIOS/FW in advanced. Else, the gpio pin request would fail. This is to ensure that we do not expose any gpio pins which shall be used for alternate functions, for eg: wakeup pin, I/O interfaces for LPSS, etc. Signed-off-by: Chew, Kean Ho <kean.ho.chew@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-11pinctrl: tegra: fix some typos and inconsistenciesStephen Warren2-29/+17
drive_dev3_pins in pinctrl-tegra114.c wasn't used; delete it. pinctrl-tegra124.c had quite a few typos. Fix those. pinctrl-tegra124.c had a few mismatches between the *_groups[] ararys and the function lists in tegra124_groups[]. Fix those. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-10Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from from Olof Johansson: "A collection of fixes for ARM platforms. A little large due to us missing to do one last week, but there's nothing in particular here that is in itself large and scary. Mostly a handful of smaller fixes all over the place. The majority is made up of fixes for OMAP, but there are a few for others as well. In particular, there was a decision to rename a binding for the Broadcom pinctrl block that we need to go in before the final release since we then treat it as ABI" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting ARM: tegra: add LED options back into tegra_defconfig ARM: dts: omap3-igep: fix boot fail due wrong compatible match ARM: OMAP3: Fix pinctrl interrupts for core2 pinctrl: Rename Broadcom Capri pinctrl binding pinctrl: refer to updated dt binding string. Update dtsi with new pinctrl compatible string ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP ARM: OMAP2+: Add support for thumb mode on DT booted N900 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4 ARM: DRA7: hwmod data: correct the sysc data for spinlock ARM: OMAP5: PRM: Fix reboot handling ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types
2014-03-05pinctrl: sirf: fix kernel panic in gpio_lock_as_irqBarry Song1-2/+2
commit 655dada6277991 causes kernel panic, this patch fixes it. [ 1.197816] [ffffffee] *pgd=0d7fd821, *pte=00000000, *ppte=00000000 [ 1.204070] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 1.209447] Modules linked in: [ 1.212490] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1 #3 [ 1.218737] task: cd03c000 ti: cd040000 task.ti: cd040000 [ 1.224127] PC is at gpiod_lock_as_irq+0xc/0x64 [ 1.228634] LR is at sirfsoc_gpio_irq_startup+0x18/0x44 [ 1.233842] pc : [<c01d3990>] lr : [<c01d1c38>] psr: a0000193 [ 1.233842] sp : cd041d30 ip : 00000000 fp : 00000000 [ 1.245296] r10: 00000000 r9 : cd023db4 r8 : 60000113 [ 1.250505] r7 : 0000003e r6 : cd023dd4 r5 : c06bfa54 r4 : cd023d80 [ 1.257014] r3 : 00000020 r2 : 00000000 r1 : ffffffea r0 : ffffffea [ 1.263526] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.270903] Control: 10c53c7d Table: 00004059 DAC: 00000015 [ 1.276631] Process swapper/0 (pid: 1, stack limit = 0xcd040240) [ 1.282620] Stack: (0xcd041d30 to 0xcd042000) [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.303283] 1d60: 00000800 00000083 ccb6d880 cd023d80 c02b41d8 00000083 0000003e ccb7c410 [ 1.311442] 1d80: 00000000 c00671dc 00000083 0000003e c02b41d8 cd3dd5c0 0000003e ccb7c634 [ 1.319601] 1da0: cd040030 c00672a8 cd3dd5c0 ccb7c410 ccb6d340 ccb7c410 ccb6d340 cd3dd400 [ 1.327760] 1dc0: cd3dd410 c02b4434 ccb7c410 c01265a8 00000001 cd3dd410 c0687108 00000000 [ 1.335919] 1de0: c0687108 00000000 00000000 c0240170 c0240158 cd3dd410 c06c30d0 c023e8bc [ 1.344079] 1e00: c023e9d4 00000000 cd3dd410 c023e9d4 c0682150 c023cf88 cd003e98 cd2d50c4 [ 1.352238] 1e20: cd3dd410 cd3dd444 c06822f0 c023e768 cd3dd418 cd3dd410 c06822f0 c023de14 [ 1.360397] 1e40: cd3dd418 00000000 cd3dd410 c023c398 cd041e78 cd041ea8 cd3dd400 cd3dd410 [ 1.368556] 1e60: 00000083 00000000 cd3dd400 cd3dd410 00000083 000000c8 c04e00c8 c023fee8 [ 1.376715] 1e80: 00000000 cd041ea8 cd3dd400 00000001 00000083 c024048c c0435ef8 c0434dec [ 1.384874] 1ea0: c068da58 c04c6d04 c0682150 c0435ef8 ffffffff 00000000 00000000 c068da58 [ 1.393033] 1ec0: 00000020 00000000 00000000 00000000 c05dabb8 00000007 c068d640 c068d640 [ 1.401193] 1ee0: c04c247c c04c249c 00000000 c00088e8 cd004c00 c043bbb8 cd029180 c03812a0 [ 1.409352] 1f00: 00000000 00000000 60000113 c0673728 60000113 c0673728 00000000 00000000 [ 1.417511] 1f20: cd7fce01 c0390a54 00000065 c003a81c c049e8bc 00000007 cd7fce0e 00000007 [ 1.425670] 1f40: 00000000 c05dabb8 00000007 c068d640 c068d640 c04c050c c04e00c8 00000065 [ 1.433829] 1f60: c04e00c0 c04c0c54 00000007 00000007 c04c050c c037d8fc cd03c000 c004322c [ 1.441988] 1f80: c0662b40 0000d640 c03737c0 00000000 00000000 00000000 00000000 00000000 [ 1.450147] 1fa0: 00000000 c03737cc 00000000 c000e478 00000000 00000000 00000000 00000000 [ 1.458307] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.466467] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 0002d481 05014092 [ 1.474640] [<c01d3990>] (gpiod_lock_as_irq) from [<c01d1c38>] (sirfsoc_gpio_irq_startup+0x18/0x44) [ 1.483661] [<c01d1c38>] (sirfsoc_gpio_irq_startup) from [<c0068438>] (irq_startup+0x34/0x6c) [ 1.492163] [<c0068438>] (irq_startup) from [<c0067044>] (__setup_irq+0x450/0x4b8) [ 1.499714] [<c0067044>] (__setup_irq) from [<c00671dc>] (request_threaded_irq+0xa8/0x128) [ 1.507960] [<c00671dc>] (request_threaded_irq) from [<c00672a8>] (request_any_context_irq+0x4c/0x7c) [ 1.517164] [<c00672a8>] (request_any_context_irq) from [<c02b4434>] (gpio_extcon_probe+0x144/0x1d4) [ 1.526279] [<c02b4434>] (gpio_extcon_probe) from [<c0240170>] (platform_drv_probe+0x18/0x48) [ 1.534783] [<c0240170>] (platform_drv_probe) from [<c023e8bc>] (driver_probe_device+0x120/0x238) [ 1.543641] [<c023e8bc>] (driver_probe_device) from [<c023cf88>] (bus_for_each_drv+0x58/0x8c) [ 1.552143] [<c023cf88>] (bus_for_each_drv) from [<c023e768>] (device_attach+0x74/0x88) [ 1.560126] [<c023e768>] (device_attach) from [<c023de14>] (bus_probe_device+0x84/0xa8) [ 1.568113] [<c023de14>] (bus_probe_device) from [<c023c398>] (device_add+0x440/0x520) [ 1.576012] [<c023c398>] (device_add) from [<c023fee8>] (platform_device_add+0xb4/0x214) [ 1.584084] [<c023fee8>] (platform_device_add) from [<c024048c>] (platform_device_register_full+0xb8/0xdc) [ 1.593719] [<c024048c>] (platform_device_register_full) from [<c04c6d04>] (sirfsoc_init_late+0xec/0xf4) [ 1.603185] [<c04c6d04>] (sirfsoc_init_late) from [<c04c249c>] (init_machine_late+0x20/0x28) [ 1.611603] [<c04c249c>] (init_machine_late) from [<c00088e8>] (do_one_initcall+0xf8/0x144) [ 1.619934] [<c00088e8>] (do_one_initcall) from [<c04c0c54>] (kernel_init_freeable+0x13c/0x1dc) [ 1.628620] [<c04c0c54>] (kernel_init_freeable) from [<c03737cc>] (kernel_init+0xc/0x118) Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sh-pfc: r8a7791: SD1_CLK fixMagnus Damm1-2/+4
Fix the SD1_CLK handling for r8a7791. Without this patch it is impossible to request all pins needed for SDHI1 on the Koelsch board. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: msm: make PINCTRL_MSM bool instead of tristateJosh Cartwright1-1/+1
Modular builds of pinctrl-msm break due to handle_bad_irq being unexported for module use. For now, make PINCTRL_MSM 'bool'. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sunxi: Fix interrupt register offset calculationHans de Goede1-3/+3
This fixing setting the interrupt type for eints >= 8. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sunxi: Fix masking when setting irq typeHans de Goede1-1/+1
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibilityChen-Yu Tsai1-0/+4
On tha Allwinner A20 SoC, the external interrupts on the pin controller device are connected to the GIC. Without chained_irq_{enter, exit}, external GPIO interrupts, such as used by mmc core card detect, cause the system to hang. This issue was first encountered during my attempt to get out-of-band interrupts for WiFi on the Cubietruck working. With David's new series of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card detection, removing the SD card also causes my Cubietruck to hang. This problem should extend to all Allwinner A20 based boards. With this fix, the system no longer hangs when I remove or insert the SD card. /proc/interrupts show that the interrupt has correctly fired. However the system still does not detect card removal/insertion. I believe this is another unrelated issue. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sh-pfc: r8a7791: Add alternative MSIOF pin groupsGeert Uytterhoeven1-0/+469
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sh-pfc: r8a7790: Add alternative MSIOF pin groupsGeert Uytterhoeven1-0/+129
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-03Merge branch 'pinctrl-mvebu' into develLinus Walleij10-290/+1291
2014-03-01Merge tag 'tags/for-mvebu-pinctrl-3xx' into mvebu/pinctrlJason Cooper4-0/+931
Sign for-mvebu/pinctrl-3xx
2014-02-26pinctrl: mvebu: dove: use global register regmapSebastian Hesselbarth1-66/+58
Now that we have a regmap for global registers, get rid of the last remaining hardcoded physical addresses. While at it, also remove DOVE_ prefix from those macros. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26pinctrl: mvebu: dove: use remapped pmu_mpp registersSebastian Hesselbarth1-5/+7
Now that we have ioremapped pmu_mpp registers, get rid of hardcoded physical addresses. While at it, also remove DOVE_ prefix from those macros. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26pinctrl: mvebu: dove: use remapped mpp4 registerSebastian Hesselbarth1-26/+27
Now that we have an ioremapped mpp4 register, get rid of hardcoded physical addresses. While at it, also remove DOVE_ prefix from those macros. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26pinctrl: mvebu: dove: use remapped mpp base registersSebastian Hesselbarth1-13/+14
Now that we have ioremapped mpp base registers, get rid of hardcoded physical addresses. While at it, also remove DOVE_ prefix from those macros. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26pinctrl: mvebu: dove: request syscon regmap for global registersSebastian Hesselbarth2-0/+28
Dove pinctrl uses some global config registers to control pins. This patch requests a syscon regmap for those registers. As this changes DT to driver requirements, fallback to a self-registered regmap with hardcoded resources, if the corresponding syscon DT node is missing. Also, WARN about old DT binding usage to encourage users to update their DTBs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26pinctrl: mvebu: dove: request additional resourcesSebastian Hesselbarth1-3/+42
Dove pinctrl also requires additional registers to control all pins. This patch requests resources for mpp4 and pmu-mpp register ranges. As this changes DT to driver requirements, fallback to hardcoded resources, if the corresponding DT regs have not been set. Also, WARN about old DT binding usage to encourage users to update their DTBs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385Thomas Petazzoni3-0/+467
The Marvell Armada 380/385 are new ARM SoCs from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing drivers/pinctrl/mvebu/ infrastructure, with no other changes that the list of pins and corresponding functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-02-25pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375Thomas Petazzoni3-0/+464
The Marvell Armada 375 is a new ARM SoC from Marvell, part of the mvebu family, but using a Cortex-A9 CPU core. In terms of pin-muxing, it is similar to Armada 370 and XP for the register layout, only different in the number of available pins and their functions. Therefore, we simply use the existing drivers/pinctrl/mvebu/ infrastructure, with no other changes that the list of pins and corresponding functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2014-02-25pinctrl: mvebu: dove: reuse mpp_{set,get} in pmu callbacksSebastian Hesselbarth1-20/+17
Dove has pins that can be switched between normal and pmu functions. Rework pmu_mpp callbacks to reuse default mpp ctrl helpers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-02-25pinctrl: mvebu: dove: consolidate auto-numbered pmu mpp rangesSebastian Hesselbarth1-16/+1
Passing a NULL name for pin ranges will auto-generate standard names for each pin. With common pinctrl driver now checking NULL name correctly, consolidate mpp pins 0-15. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-02-25pinctrl: mvebu: remove MPP_REG_CTRL macroThomas Petazzoni1-16/+3
Now that each per-SoC pinctrl driver must implement its own get/set functions, there is no point in keeping the MPP_REG_CTRL macro, whose purpose was to let the core pinctrl mvebu driver use default get/set functions. While at it also update the comment about mvebu_mpp_ctrl. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-02-25pinctrl: mvebu: remove common get/set functionsSebastian Hesselbarth1-47/+2
With every SoC always providing its own get/set callbacks, we can now remove the generic ones, remove the obsolete base address, and always use the provided callbacks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-02-25pinctrl: mvebu: move resource allocation to SoC specific driversSebastian Hesselbarth5-16/+33
The way that mvebu pinctrl is designed, requesting mpp registers in common pinctrl driver does not allow SoC specific drivers to access this resource. Move resource allocation in each SoC pinctrl driver and enable already provided mpp_{set,get} callbacks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-02-25pinctrl: mvebu: armada-xp: provide generic mpp callbacksSebastian Hesselbarth1-0/+12
We want to get rid of passing register addresses to common pinctrl driver, so provide set/get callbacks that use generic mpp pins helper and will be used later. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-02-25pinctrl: mvebu: armada-370: provide generic mpp callbacksSebastian Hesselbarth1-0/+12
We want to get rid of passing register addresses to common pinctrl driver, so provide set/get callbacks that use generic mpp pins helper and will be used later. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-02-25pinctrl: mvebu: kirkwood: provide generic mpp callbacksSebastian Hesselbarth1-0/+12
We want to get rid of passing register addresses to common pinctrl driver, so provide set/get callbacks that use generic mpp pins helper and will be used later. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch>
2014-02-25pinctrl: mvebu: dove: provide generic mpp callbacksSebastian Hesselbarth1-14/+22
We want to get rid of passing register addresses to common pinctrl driver, so provide set/get callbacks that use generic mpp pins helper and will be used later. While at it, also make use of globally defined MPP macros. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>