summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
3 dayspinctrl: qcom: lpass-lpi: mark the GPIO controller as sleepingBartosz Golaszewski1-1/+1
commit ebc18e9854e5a2b62a041fb57b216a903af45b85 upstream. The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable@vger.kernel.org Reported-by: Val Packett <val@packett.cool> Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 dayspinctrl: single: Fix incorrect type for error return variableHaotian Zhang1-3/+4
[ Upstream commit 61d1bb53547d42c6bdaec9da4496beb3a1a05264 ] pcs_pinconf_get() and pcs_pinconf_set() declare ret as unsigned int, but assign it the return values of pcs_get_function() that may return negative error codes. This causes negative error codes to be converted to large positive values. Change ret from unsigned int to int in both functions. Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
9 dayspinctrl: single: Fix PIN_CONFIG_BIAS_DISABLE handlingMatthijs Kooijman1-6/+12
[ Upstream commit b5fe46efc147516a908d2d31bf40eb858ab76d51 ] The pinctrl-single driver handles pin_config_set by looking up the requested setting in a DT-defined lookup table, which defines what bits correspond to each setting. There is no way to add PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead code to disable the bias by applying the disable values of both the pullup and pulldown entries in the table. However, this code is inside the table-lookup loop, so it would only execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table, which can never exist, so this code never runs. This commit lifts the offending code out of the loop, so it just executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested, skippipng the table lookup loop. This also introduces a new `param` variable to make the code slightly more readable. This bug seems to have existed when this code was first merged in commit 9dddb4df90d13 ("pinctrl: single: support generic pinconf"). Earlier versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in the lookup table, but that was removed, which is probably how this bug was introduced. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <20240319110633.230329-1-matthijs@stdin.nl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 61d1bb53547d ("pinctrl: single: Fix incorrect type for error return variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
9 dayspinctrl: stm32: fix hwspinlock resource leak in probe functionHaotian Zhang1-1/+1
[ Upstream commit 002679f79ed605e543fbace465557317cd307c9a ] In stm32_pctl_probe(), hwspin_lock_request_specific() is called to request a hwspinlock, but the acquired lock is not freed on multiple error paths after this call. This causes resource leakage when the function fails to initialize properly. Use devm_hwspin_lock_request_specific() instead of hwspin_lock_request_specific() to automatically manage the hwspinlock resource lifecycle. Fixes: 97cfb6cd34f2 ("pinctrl: stm32: protect configuration registers with a hwspinlock") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
9 dayspinctrl: qcom: msm: Fix deadlock in pinmux configurationPraveen Talari1-1/+1
[ Upstream commit 1c2e70397b4125022dba80f6111271a37fb36bae ] Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux() to prevent deadlock when wakeup IRQ is triggered on the same GPIO being reconfigured. The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ handler attempts to reconfigure the same GPIO's pinmux. In this scenario, msm_pinmux_set_mux() calls disable_irq() which waits for the currently running IRQ handler to complete, creating a circular dependency that results in deadlock. Using disable_irq_nosync() avoids waiting for the IRQ handler to complete, preventing the deadlock condition while still properly disabling the interrupt during pinmux reconfiguration. Suggested-by: Prasad Sodagudi <prasad.sodagudi@oss.qualcomm.com> Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()Jared Kangas1-0/+1
[ Upstream commit 6010d4d8b55b5d3ae1efb5502c54312e15c14f21 ] s32_pmx_gpio_request_enable() does not initialize the newly-allocated gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs. This could result in a linked list corruption. Initialize the new list_head with INIT_LIST_HEAD() to fix this. Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support") Signed-off-by: Jared Kangas <jkangas@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_descJared Kangas1-1/+1
[ Upstream commit 97ea34defbb57bfaf71ce487b1b0865ffd186e81 ] s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support") Signed-off-by: Jared Kangas <jkangas@redhat.com> Tested-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()Haotian Zhang1-4/+19
[ Upstream commit 9b07cdf86a0b90556f5b68a6b20b35833b558df3 ] The driver calls fwnode_get_named_child_node() which takes a reference on the child node, but never releases it, which causes a reference leak. Fix by using devm_add_action_or_reset() to automatically release the reference when the device is removed. Fixes: d5282a539297 ("pinctrl: cs42l43: Add support for the cs42l43") Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24pinctrl: keembay: release allocated memory in detach pathBartosz Golaszewski1-2/+5
[ Upstream commit aae7a2876c3b39d07aa7655ea082af8e7862f3a5 ] Unlike all the other allocations in this driver, the memory for storing the pin function descriptions allocated with kcalloc() and later resized with krealloc() is never freed. Use devres like elsewhere to handle that. While at it - replace krealloc() with more suitable devm_krealloc_array(). Note: the logic in this module is pretty convoluted and could probably use some revisiting, we should probably be able to calculate the exact amount of memory needed in advance or even skip the allocation altogether and just add each function to the radix tree separately. Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24pinctrl: single: fix bias pull up/down handling in pin_config_setChi Zhang1-1/+3
[ Upstream commit 236152dd9b1675a35eee912e79e6c57ca6b6732f ] In the pin_config_set function, when handling PIN_CONFIG_BIAS_PULL_DOWN or PIN_CONFIG_BIAS_PULL_UP, the function calls pcs_pinconf_clear_bias() which writes the register. However, the subsequent operations continue using the stale 'data' value from before the register write, effectively causing the bias clear operation to be overwritten and not take effect. Fix this by reading the 'data' value from the register after calling pcs_pinconf_clear_bias(). This bug seems to have existed when this code was first merged in commit 9dddb4df90d1 ("pinctrl: single: support generic pinconf"). Signed-off-by: Chi Zhang <chizhang@asrmicro.com> Link: https://lore.kernel.org/20250807062038.13610-1-chizhang@asrmicro.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19pinctrl: samsung: Drop unused S3C24xx driver dataKrzysztof Kozlowski1-4/+0
commit 358253fa8179ab4217ac283b56adde0174186f87 upstream. Drop unused declarations after S3C24xx SoC family removal in the commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"). Fixes: 1ea35b355722 ("ARM: s3c: remove s3c24xx specific hacks") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250830111657.126190-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15pinctrl: check the return value of pinmux_ops::get_function_name()Bartosz Golaszewski1-1/+1
commit 4002ee98c022d671ecc1e4a84029e9ae7d8a5603 upstream. While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. Cc: stable@vger.kernel.org Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15pinctrl: renesas: Use int type to store negative error codesQianfeng Rong1-1/+2
[ Upstream commit 9f062fc5b0ff44550088912ab89f9da40226a826 ] Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned int to int, as it needs to store either negative error codes or zero returned by sh_pfc_pinconf_set(). No effect on runtime. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Fixes: d0593c363f04ccc4 ("pinctrl: sh-pfc: Propagate errors on group config") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-15pinctrl: meson-gxl: add missing i2c_d pinmuxDa Xue1-0/+10
[ Upstream commit d8c2a9edd181f0cc4a66eec954b3d8f6a1d954a7 ] Amlogic GXL has 4 I2C attached to gpio-periphs. I2C_D is on GPIOX_10/11. Add the relevant func 3 pinmux per the datasheet for S805X/S905X/S905D. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Da Xue <da@libre.computer> Link: https://lore.kernel.org/20250821233335.1707559-1-da@libre.computer Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-04pinctrl: STMFX: add missing HAS_IOMEM dependencyRandy Dunlap1-0/+1
[ Upstream commit a12946bef0407cf2db0899c83d42c47c00af3fbc ] When building on ARCH=um (which does not set HAS_IOMEM), kconfig reports an unmet dependency caused by PINCTRL_STMFX. It selects MFD_STMFX, which depends on HAS_IOMEM. To stop this warning, PINCTRL_STMFX should also depend on HAS_IOMEM. kconfig warning: WARNING: unmet direct dependencies detected for MFD_STMFX Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y] Selected by [y]: - PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y] Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/20250815022721.1650885-1-rdunlap@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28pinctrl: stm32: Manage irq affinity settingsCheick Traore1-0/+1
[ Upstream commit 4c5cc2f65386e22166ce006efe515c667aa075e4 ] Trying to set the affinity of the interrupts associated to stm32 pinctrl results in a write error. Fill struct irq_chip::irq_set_affinity to use the default helper function. Signed-off-by: Cheick Traore <cheick.traore@foss.st.com> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250610143042.295376-3-antonio.borneo@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15pinmux: fix race causing mux_owner NULL with active mux_usecountMukesh Ojha1-11/+9
[ Upstream commit 0b075c011032f88d1cfde3b45d6dcf08b44140eb ] commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. Fixes: 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> Link: https://lore.kernel.org/20250708-pinmux-race-fix-v2-1-8ae9e8a0d1a1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-15pinctrl: sunxi: Fix memory leak on krealloc failureYuan Chen1-3/+8
[ Upstream commit e3507c56cbb208d4f160942748c527ef6a528ba1 ] In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize the pinctrl_map array, the function returns -ENOMEM directly without freeing the previously allocated *map buffer. This results in a memory leak of the original kmalloc_array allocation. Fixes: e11dee2e98f8 ("pinctrl: sunxi: Deal with configless pins") Signed-off-by: Yuan Chen <chenyuan@kylinos.cn> Link: https://lore.kernel.org/20250620012708.16709-1-chenyuan_fl@163.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-17pinctrl: qcom: msm: mark certain pins as invalid for interruptsBartosz Golaszewski1-0/+20
commit 93712205ce2f1fb047739494c0399a26ea4f0890 upstream. On some platforms, the UFS-reset pin has no interrupt logic in TLMM but is nevertheless registered as a GPIO in the kernel. This enables the user-space to trigger a BUG() in the pinctrl-msm driver by running, for example: `gpiomon -c 0 113` on RB2. The exact culprit is requesting pins whose intr_detection_width setting is not 1 or 2 for interrupts. This hits a BUG() in msm_gpio_irq_set_type(). Potentially crashing the kernel due to an invalid request from user-space is not optimal, so let's go through the pins and mark those that would fail the check as invalid for the irq chip as we should not even register them as available irqs. This function can be extended if we determine that there are more corner-cases like this. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-17pinctrl: amd: Clear GPIO debounce for suspendMario Limonciello1-0/+11
[ Upstream commit 8ff4fb276e2384a87ae7f65f3c28e1e139dbb3fe ] soc-button-array hardcodes a debounce value by means of gpio_keys which uses pinctrl-amd as a backend to program debounce for a GPIO. This hardcoded value doesn't match what the firmware intended to be programmed in _AEI. The hardcoded debounce leads to problems waking from suspend. There isn't appetite to conditionalize the behavior in soc-button-array or gpio-keys so clear it when the system suspends to avoid problems with being able to resume. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hans de Goede <hansg@kernel.org> Fixes: 5c4fa2a6da7fb ("Input: soc_button_array - debounce the buttons") Link: https://lore.kernel.org/linux-input/mkgtrb5gt7miyg6kvqdlbu4nj3elym6ijudobpdi26gp4xxay5@rsa6ytrjvj2q/ Link: https://lore.kernel.org/linux-input/20250625215813.3477840-1-superm1@kernel.org/ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/20250627150155.3311574-1-superm1@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: mcp23s08: Reset all pins to input at probeMike Looijmans1-0/+8
[ Upstream commit 3ede3f8b4b4b399b0ca41e44959f80d5cf84fc98 ] At startup, the driver just assumes that all registers have their default values. But after a soft reset, the chip will just be in the state it was, and some pins may have been configured as outputs. Any modification of the output register will cause these pins to be driven low, which leads to unexpected/unwanted effects. To prevent this from happening, set the chip's IO configuration register to a known safe mode (all inputs) before toggling any other bits. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Link: https://lore.kernel.org/20250314151803.28903-1-mike.looijmans@topic.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()Gabor Juhos1-1/+4
[ Upstream commit 57273ff8bb16f3842c2597b5bbcd49e7fa12edf7 ] The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-4-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()Gabor Juhos1-3/+4
[ Upstream commit bfa0ff804ffa8b1246ade8be08de98c9eb19d16f ] The armada_37xx_gpio_direction_{in,out}put() functions can fail, so propagate their error values back to the stack instead of silently ignoring those. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-5-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()Gabor Juhos1-1/+4
[ Upstream commit 6481c0a83367b0672951ccc876fbae7ee37b594b ] The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-6-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()Gabor Juhos1-3/+1
[ Upstream commit 4229c28323db141eda69cb99427be75d3edba071 ] The regmap_update_bits() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-7-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19pinctrl: qcom: pinctrl-qcm2290: Add missing pinsWojciech Slenska1-0/+9
[ Upstream commit 315345610faee8a0568b522dba9e35067d1732ab ] Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19pinctrl: at91: Fix possible out-of-boundary accessAndy Shevchenko1-1/+5
[ Upstream commit 762ef7d1e6eefad9896560bfcb9bcf7f1b6df9c1 ] at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks. Fixes: 6732ae5cb47c ("ARM: at91: add pinctrl support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/ Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19pinctrl: armada-37xx: set GPIO output value before setting directionGabor Juhos1-8/+7
commit e6ebd4942981f8ad37189bbb36a3c8495e21ef4c upstream. Changing the direction before updating the output value in the OUTPUT_VAL register may result in a glitch on the output line if the previous value in the OUTPUT_VAL register is different from the one we want to set. In order to avoid that, update the output value before changing the direction. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31Gabor Juhos1-0/+3
commit 947c93eb29c2a581c0b0b6d5f21af3c2b7ff6d25 upstream. The controller has two consecutive OUTPUT_VAL registers and both holds output value for 32 GPIOs. Due to a missing adjustment, the current code always uses the first register while setting the output value whereas it should use the second one for GPIOs > 31. Add the missing armada_37xx_update_reg() call to adjust the register according to the 'offset' parameter of the function to fix the issue. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()Dan Carpenter1-1/+1
commit 5a062c3c3b82004766bc3ece82b594d337076152 upstream. This should be >= pmx->soc->ngroups instead of > to avoid an out of bounds access. The pmx->soc->groups[] array is allocated in tegra_pinctrl_probe(). Fixes: c12bfa0fee65 ("pinctrl-tegra: Restore SFSEL bit when freeing pins") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Kunwu Chan <kunwu.chan@linux.dev> Link: https://lore.kernel.org/82b40d9d-b437-42a9-9eb3-2328aa6877ac@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04pinctrl: qcom: switch to devm_register_sys_off_handler()Dmitry Baryshkov1-11/+12
[ Upstream commit 41e452e6933d14146381ea25cff5e4d1ac2abea1 ] Error-handling paths in msm_pinctrl_probe() don't call a function required to unroll restart handler registration, unregister_restart_handler(). Instead of adding calls to this function, switch the msm pinctrl code into using devm_register_sys_off_handler(). Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: qcom/msm: Convert to platform remove callback returning voidUwe Kleine-König49-51/+49
[ Upstream commit 22ee670a8ad3ec7cd9d872d4512fe8797130e191 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). To convert all those qcom pinctrl drivers, make msm_pinctrl_remove() return void (instead of zero) and use .remove_new in all drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231009162510.335208-3-u.kleine-koenig@pengutronix.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 41e452e6933d ("pinctrl: qcom: switch to devm_register_sys_off_handler()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: meson: define the pull up/down resistor value as 60 kOhmMartin Blumenstingl1-1/+1
[ Upstream commit e56088a13708757da68ad035269d69b93ac8c389 ] The public datasheets of the following Amlogic SoCs describe a typical resistor value for the built-in pull up/down resistor: - Meson8/8b/8m2: not documented - GXBB (S905): 60 kOhm - GXL (S905X): 60 kOhm - GXM (S912): 60 kOhm - G12B (S922X): 60 kOhm - SM1 (S905D3): 60 kOhm The public G12B and SM1 datasheets additionally state min and max values: - min value: 50 kOhm for both, pull-up and pull-down - max value for the pull-up: 70 kOhm - max value for the pull-down: 130 kOhm Use 60 kOhm in the pinctrl-meson driver as well so it's shown in the debugfs output. It may not be accurate for Meson8/8b/8m2 but in reality 60 kOhm is closer to the actual value than 1 Ohm. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/20250329190132.855196-1-martin.blumenstingl@googlemail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: devicetree: do not goto err when probing hogs in pinctrl_dt_to_mapValentin Caron1-2/+8
[ Upstream commit c98868e816209e568c9d72023ba0bc1e4d96e611 ] Cross case in pinctrl framework make impossible to an hogged pin and another, not hogged, used within the same device-tree node. For example with this simplified device-tree : &pinctrl { pinctrl_pin_1: pinctrl-pin-1 { pins = "dummy-pinctrl-pin"; }; }; &rtc { pinctrl-names = "default" pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1> rtc_pin_1: rtc-pin-1 { pins = "dummy-rtc-pin"; }; }; "pinctrl_pin_1" configuration is never set. This produces this path in the code: really_probe() pinctrl_bind_pins() | devm_pinctrl_get() | pinctrl_get() | create_pinctrl() | pinctrl_dt_to_map() | // Hog pin create an abort for all pins of the node | ret = dt_to_map_one_config() | | /* Do not defer probing of hogs (circular loop) */ | | if (np_pctldev == p->dev->of_node) | | return -ENODEV; | if (ret) | goto err | call_driver_probe() stm32_rtc_probe() pinctrl_enable() pinctrl_claim_hogs() create_pinctrl() for_each_maps(maps_node, i, map) // Not hog pin is skipped if (pctldev && strcmp(dev_name(pctldev->dev), map->ctrl_dev_name)) continue; At the first call of create_pinctrl() the hogged pin produces an abort to avoid a defer of hogged pins. All other pin configurations are trashed. At the second call, create_pinctrl is now called with pctldev parameter to get hogs, but in this context only hogs are set. And other pins are skipped. To handle this, do not produce an abort in the first call of create_pinctrl(). Classic pin configuration will be set in pinctrl_bind_pins() context. And the hogged pin configuration will be set in pinctrl_claim_hogs() context. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned"Artur Weber1-22/+22
[ Upstream commit 07b5a2a13f4704c5eae3be7277ec54ffdba45f72 ] Replace uses of bare "unsigned" with "unsigned int" to fix checkpatch warnings. No functional change. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250303-bcm21664-pinctrl-v3-2-5f8b80e4ab51@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04pinctrl-tegra: Restore SFSEL bit when freeing pinsPrathamesh Shete2-8/+57
[ Upstream commit c12bfa0fee65940b10ff5187349f76c6f6b1df9c ] Each pin can be configured as a Special Function IO (SFIO) or GPIO, where the SFIO enables the pin to operate in alternative modes such as I2C, SPI, etc. The current implementation sets all the pins back to SFIO mode even if they were initially in GPIO mode. This can cause glitches on the pins when pinctrl_gpio_free() is called. Avoid these undesired glitches by storing the pin's SFIO/GPIO state on GPIO request and restoring it on GPIO free. Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/20250305104939.15168-2-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02pinctrl: renesas: rza2: Fix potential NULL pointer dereferenceChenyuan Yang1-0/+3
[ Upstream commit f752ee5b5b86b5f88a5687c9eb0ef9b39859b908 ] `chip.label` in rza2_gpio_register() could be NULL. Add the missing check. Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/20250210232552.1545887-1-chenyuan0y@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-25pinctrl: qcom: Clear latched interrupt status when changing IRQ typeStephan Gerhold1-6/+6
commit e225128c3f8be879e7d4eb71a25949e188b420ae upstream. When submitting the TLMM test driver, Bjorn reported that some of the test cases are failing for GPIOs that not are backed by PDC (i.e. "non-wakeup" GPIOs that are handled directly in pinctrl-msm). Basically, lingering latched interrupt state is still being delivered at IRQ request time, e.g.: ok 1 tlmm_test_silent_rising tlmm_test_silent_falling: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178 Expected atomic_read(&priv->intr_count) == 0, but atomic_read(&priv->intr_count) == 1 (0x1) not ok 2 tlmm_test_silent_falling tlmm_test_silent_low: ASSERTION FAILED at drivers/pinctrl/qcom/tlmm-test.c:178 Expected atomic_read(&priv->intr_count) == 0, but atomic_read(&priv->intr_count) == 1 (0x1) not ok 3 tlmm_test_silent_low ok 4 tlmm_test_silent_high Whether to report interrupts that came in while the IRQ was unclaimed doesn't seem to be well-defined in the Linux IRQ API. However, looking closer at these specific cases, we're actually reporting events that do not match the interrupt type requested by the driver: 1. After "ok 1 tlmm_test_silent_rising", the GPIO is in low state and configured for IRQF_TRIGGER_RISING. 2. (a) In preparation for "tlmm_test_silent_falling", the GPIO is switched to high state. The rising interrupt gets latched. (b) The GPIO is re-configured for IRQF_TRIGGER_FALLING, but the latched interrupt isn't cleared. (c) The IRQ handler is called for the latched interrupt, but there wasn't any falling edge. 3. (a) For "tlmm_test_silent_low", the GPIO remains in high state. (b) The GPIO is re-configured for IRQF_TRIGGER_LOW. This seems to result in a phantom interrupt that gets latched. (c) The IRQ handler is called for the latched interrupt, but the GPIO isn't in low state. 4. (a) For "tlmm_test_silent_high", the GPIO is switched to low state. (b) This doesn't result in a latched interrupt, because RAW_STATUS_EN was cleared when masking the level-triggered interrupt. Fix this by clearing the interrupt state whenever making any changes to the interrupt configuration. This includes previously disabled interrupts, but also any changes to interrupt polarity or detection type. With this change, all 16 test cases are now passing for the non-wakeup GPIOs in the TLMM. Cc: stable@vger.kernel.org Fixes: cf9d052aa600 ("pinctrl: qcom: Don't clear pending interrupts when enabling") Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Closes: https://lore.kernel.org/r/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com/ Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/20250312-pinctrl-msm-type-latch-v1-1-ce87c561d3d7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10pinctrl: intel: Fix wrong bypass assignment in intel_pinctrl_probe_pwm()Andy Shevchenko1-1/+0
[ Upstream commit 0eee258cdf172763502f142d85e967f27a573be0 ] When instantiating PWM, the bypass should be set to false. The field is used for the selected Intel SoCs that do not have PWM feature enabled in their pin control IPs. Fixes: eb78d3604d6b ("pinctrl: intel: Enumerate PWM device when community has a capability") Reported-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: renesas: rzv2m: Fix missing of_node_put() callFabrizio Castro1-0/+2
[ Upstream commit 5a550b00704d3a2cd9d766a9427b0f8166da37df ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: 92a9b8252576 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250305163753.34913-4-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: tegra: Set SFIO mode to Mux RegisterPrathamesh Shete1-0/+3
[ Upstream commit 17013f0acb322e5052ff9b9d0fab0ab5a4bfd828 ] Tegra devices have an 'sfsel' bit field that determines whether a pin operates in SFIO (Special Function I/O) or GPIO mode. Currently, tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO. However, tegra_pinctrl_set_mux() can be called independently in certain code paths where gpio_disable_free() is not invoked. In such cases, failing to set the SFIO mode could lead to incorrect pin configurations, resulting in functional issues for peripherals relying on SFIO. This patch ensures that whenever set_mux() is called, the SFIO mode is correctly set in the Mux Register if the 'sfsel' bit is present. This prevents situations where the pin remains in GPIO mode despite being configured for SFIO use. Fixes: 971dac7123c7 ("pinctrl: add a driver for NVIDIA Tegra") Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Link: https://lore.kernel.org/20250306050542.16335-1-pshete@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: renesas: rzg2l: Fix missing of_node_put() callFabrizio Castro1-0/+2
[ Upstream commit a5779e625e2b377f16a6675c432aaf299ce5028c ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250305163753.34913-3-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10pinctrl: renesas: rza2: Fix missing of_node_put() callFabrizio Castro1-0/+2
[ Upstream commit abcdeb4e299a11ecb5a3ea0cce00e68e8f540375 ] of_parse_phandle_with_fixed_args() requires its caller to call into of_node_put() on the node pointer from the output structure, but such a call is currently missing. Call into of_node_put() to rectify that. Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller") Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250305163753.34913-5-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22pinctrl: bcm281xx: Fix incorrect regmap max_registers valueArtur Weber1-1/+1
[ Upstream commit 68283c1cb573143c0b7515e93206f3503616bc10 ] The max_registers value does not take into consideration the stride; currently, it's set to the number of the last pin, but this does not accurately represent the final register. Fix this by multiplying the current value by 4. Fixes: 54b1aa5a5b16 ("ARM: pinctrl: Add Broadcom Capri pinctrl driver") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/20250207-bcm21664-pinctrl-v1-2-e7cfac9b2d3b@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21pinctrl: cy8c95x0: Respect IRQ trigger settings from firmwareAndy Shevchenko1-1/+1
[ Upstream commit 1ddee69108d305bbc059cbf31c0b47626796be77 ] Some of the platforms may connect the INT pin via inversion logic effectively make the triggering to be active-low. Remove explicit trigger flag to respect the settings from firmware. Without this change even idling chip produces spurious interrupts and kernel disables the line in the result: irq 33: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 125 Comm: irq/33-i2c-INT3 Not tainted 6.12.0-00236-g8b874ed11dae #64 Hardware name: Intel Corp. QUARK/Galileo, BIOS 0x01000900 01/01/2014 ... handlers: [<86e86bea>] irq_default_primary_handler threaded [<d153e44a>] cy8c95x0_irq_handler [pinctrl_cy8c95x0] Disabling IRQ #33 Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/20250117142304.596106-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17pinctrl: samsung: fix fwnode refcount cleanup if platform_get_irq_optional() ↵Javier Carrasco1-1/+1
fails commit 459915f55509f4bfd6076daa1428e28490ddee3b upstream. Commit 50ebd19e3585 ("pinctrl: samsung: drop pin banks references on error paths") fixed the pin bank references on the error paths of the probe function, but there is still an error path where this is not done. If samsung_pinctrl_get_soc_data() does not fail, the child references will have acquired, and they will need to be released in the error path of platform_get_irq_optional(), as it is done in the following error paths within the probe function. Replace the direct return in the error path with a goto instruction to the cleanup function. Cc: stable@vger.kernel.org Fixes: a382d568f144 ("pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241106-samsung-pinctrl-put-v1-1-de854e26dd03@gmail.com [krzysztof: change Fixes SHA to point to commit introducing the return leading to OF node leak] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-08pinctrl: amd: Take suspend type into consideration which pins are non-wakeMaciej S. Szmigiero2-10/+24
[ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ] Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5e1a6b ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08pinctrl: stm32: Add check for clk_enable()Mingwei Zheng1-38/+38
[ Upstream commit 451bc9aea9a1a6fe53969e81a5cb1bd785c0d989 ] Convert the driver to clk_bulk*() API. Add check for the return value of clk_bulk_enable() to catch the potential error. Fixes: 05d8af449d93 ("pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested") Signed-off-by: Mingwei Zheng <zmw12306@gmail.com> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250106220659.2640365-1-zmw12306@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08of: remove internal arguments from of_property_for_each_u32()Luca Ceresoli2-6/+2
[ Upstream commit 9722c3b66e21ff08aec570d02a97d331087fd70f ] The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Stable-dep-of: 28fa3291cad1 ("clk: fix an OF node reference leak in of_clk_get_parent_name()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap lockingEvgenii Shatokhin1-0/+6
commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream. If a device uses MCP23xxx IO expander to receive IRQs, the following bug can happen: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ... preempt_count: 1, expected: 0 ... Call Trace: ... __might_resched+0x104/0x10e __might_sleep+0x3e/0x62 mutex_lock+0x20/0x4c regmap_lock_mutex+0x10/0x18 regmap_update_bits_base+0x2c/0x66 mcp23s08_irq_set_type+0x1ae/0x1d6 __irq_set_trigger+0x56/0x172 __setup_irq+0x1e6/0x646 request_threaded_irq+0xb6/0x160 ... We observed the problem while experimenting with a touchscreen driver which used MCP23017 IO expander (I2C). The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from concurrent accesses, which is the default for regmaps without .fast_io, .disable_locking, etc. mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter locks the mutex. However, __setup_irq() locks desc->lock spinlock before calling these functions. As a result, the system tries to lock the mutex whole holding the spinlock. It seems, the internal regmap locks are not needed in this driver at all. mcp->lock seems to protect the regmap from concurrent accesses already, except, probably, in mcp_pinconf_get/set. mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes mcp->lock and enables regmap caching, so that the potentially slow I2C accesses are deferred until chip_bus_unlock(). The accesses to the regmap from mcp23s08_probe_one() do not need additional locking. In all remaining places where the regmap is accessed, except mcp_pinconf_get/set(), the driver already takes mcp->lock. This patch adds locking in mcp_pinconf_get/set() and disables internal locking in the regmap config. Among other things, it fixes the sleeping in atomic context described above. Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Cc: stable@vger.kernel.org Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/20241209074659.1442898-1-e.shatokhin@yadro.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-20 09:18:37 +0300