summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/sh-pfc
AgeCommit message (Collapse)AuthorFilesLines
2016-04-20pinctrl: sh-pfc: only use dummy states for non-DT platformsWolfram Sang1-1/+3
commit 0129801be4b87226bf502f18f5a9eabd356d1058 upstream. If pinctrl_provide_dummies() is used unconditionally, then the dummy state will be used even on DT platforms when the "init" state was intentionally left out. Instead of "default", the dummy "init" state will then be used during probe. Thus, when probing an I2C controller on cold boot, communication triggered by bus notifiers broke because the pins were not initialized. Do it like OMAP2: use the dummy state only for non-DT platforms. Fixes: ef0eebc05130 ("drivers/pinctrl: Add the concept of an "init" state") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01pinctrl: sh-pfc: sh7734: Add missing cfg macro parameter to fix buildGeert Uytterhoeven1-3/+3
When building for SH7734: drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4 drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:2: error: '_GP_DATA' undeclared here (not in a function) drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4 drivers/pinctrl/sh-pfc/pfc-sh7734.c:586:1: error: macro "_GP_DATA" passed 5 arguments, but takes just 4 ... drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:1: error: macro "_GP_INOUTSEL" passed 5 arguments, but takes just 4 drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:53: error: '_GP_INOUTSEL' undeclared here (not in a function) drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: initialization makes integer from pointer without a cast [enabled by default] drivers/pinctrl/sh-pfc/pfc-sh7734.c:2389:2: warning: (near initialization for '(anonymous)[0]') [enabled by default] ... drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:1: error: macro "_GP_INDT" passed 5 arguments, but takes just 4 drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:47: error: '_GP_INDT' undeclared here (not in a function) drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: initialization makes integer from pointer without a cast [enabled by default] drivers/pinctrl/sh-pfc/pfc-sh7734.c:2416:2: warning: (near initialization for '(anonymous)[0]') [enabled by default] ... Add the missing "cfg" macro parameters to the sh7734-specific _GP_DATA(), _GP_INOUTSEL(), and _GP_INDT() macros to fix this. Fixes: 22768fc60abbf58b ("pinctrl: sh-pfc: Add macros defining GP ports with config flags") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entryGeert Uytterhoeven1-3/+0
Since the removal of the r8a7778 legacy SoC code in commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), r8a7778 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entryGeert Uytterhoeven1-3/+0
Since the removal of the r8a7779 legacy SoC code in commit c99cd90d98a98aa1 ("ARM: shmobile: r8a7779: Remove legacy SoC code"), r8a7779 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>Geert Uytterhoeven7-6/+5
This header file will be removed soon. Copy the helper macro RCAR_GP_PIN(), which is used by the pinctrl drivers only, to sh_pfc.h, and drop the #include. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-20pinctrl: sh-pfc: Rename .gpio_data[] to .pinmux_data[]Geert Uytterhoeven24-53/+53
The sh_pfc_soc_info.gpio_data[] array contains not only GPIO data, but also various other pinmux-related data (functions and marks). Every single driver already calls its local array pinmux_data[]. Hence rename the sh_pfc_soc_info member to "pinmux_data". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-10-20pinctrl: sh-pfc: r8a7778: Add bias (pull-up) pinconf supportUlrich Hecht1-21/+242
On this SoC there is no simple mapping of GP pins to pull-up register bits, so we need a table. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20pinctrl: sh-pfc: Add macros defining GP ports with config flagsUlrich Hecht1-22/+25
PORT_GP_CFG_1 and PORT_GP_CFG_32 work like their non-CFG counterparts but accept an extra argument with config flags. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20pinctrl: sh-pfc: r8a7794: Add VIN pin groupsKoji Matsuoka1-0/+184
Add VIN0/1 pin groups to R8A7794 PFC driver. Sergei: rebased, renamed, added changelog, gathered 12 VIN1 data pins into a single pin group, added "vin1_data10" pin group, used 'union vin_data' and VIN_DATA_PIN_GROUP() macro to describe VIN1 pins, reversed the order of the VIN1 pin groups, removed unneeded empty lines, fixed VIN1 separator comment. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20pinctrl: sh-pfc: r8a779[01]: Move 'union vin_data' to shared header fileSergei Shtylyov3-37/+23
R8A7790/1 PFC drivers use almost identical 'union vin_data' and completely identical VIN_DATA_PIN_GROUP() macro; we thus can move them into the shared header file... Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7795: add EtherAVB supportTakeshi Kihara1-0/+87
This patch adds EthernetAVB Based on a much lager patch by Takeshi Kihara which was originally posted by Kuninori Morimoto. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms: extracted from a larger patch; corrected swapped {MATCH,CAPTURE_A} pins] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7795: add Audio SSI pin supportKuninori Morimoto1-0/+231
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7795: add Audio clock pin supportKuninori Morimoto1-0/+160
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7795: add I2C pin supportKuninori Morimoto1-0/+77
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7795: add SCIFx supportGeert Uytterhoeven1-0/+257
This patch adds SCIF0/1/2/3/4/5 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [Morimoto-san: Updated] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02pinctrl: sh-pfc: Initial R8A7795 PFC supportTakeshi Kihara5-0/+2018
Add PFC base support for the R8A7795 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto-san: updated] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: remove unused PINMUX_IPSR_MODSEL_DATA()Kuninori Morimoto1-2/+0
Now, all PINMUX_IPSR_MODSEL_DATA() are replased to PINMUX_IPSR_MSEL() Let's remove unused PINMUX_IPSR_MODSEL_DATA() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7779: use PINMUX_IPSR_MSEL()Kuninori Morimoto1-210/+210
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7790: use PINMUX_IPSR_MSEL()Kuninori Morimoto1-519/+519
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7791: use PINMUX_IPSR_MSEL()Kuninori Morimoto1-538/+538
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: r8a7794: use PINMUX_IPSR_MSEL()Kuninori Morimoto1-414/+414
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: sh7734: use PINMUX_IPSR_MSEL()Kuninori Morimoto1-389/+389
Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: modify PINMUX_IPSR_MSEL() macro orderKuninori Morimoto1-1/+1
The difference between PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are FN_xxx order, and PINMUX_IPSR_MSEL() is used only from r8a7778. Now it r8a7778 works correctly with PINMUX_IPSR_MODSEL_DATA() order. This means we can merge PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA(). Current PFC driver is very difficult to read, because macro names are using different length. Especially PINMUX_IPSR_MODSEL_DATA() is well used macro PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can merge PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: Remove hardcoded IRQ numbersLaurent Pinchart5-134/+125
Now that all ARM-based Renesas SoCs use multiplatform kernels only the hardcoded IRQ numbers can be dropped as they're dynamically allocated. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-02pinctrl: sh-pfc: Get rid of CONFIG_ARCH_SHMOBILE_LEGACYGeert Uytterhoeven1-22/+19
Shmobile is all multiplatform these days, so get rid of the reference to CONFIG_ARCH_SHMOBILE_LEGACY. Move the legacy code to do the non-DT mapping between GPIOs and pins inside the existing #ifdef CONFIG_SUPERH section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02pinctrl: sh-pfc: r8a7791/r8a7793: Correct SCIFB1_B SCK MOD_SEL valueGeert Uytterhoeven1-1/+1
When using serial port SCIFB1_B, transmit works, but nothing is received. Receive fails because the SCIFB1_SCK_B settings configure the wrong value for the sel_scifb1 field in the Module Select Register (MOD_SEL), due to an ambiguity in the R-Car M2-W and M2-N datasheets. Tested on r8a7791/koelsch using pins 53 (TXD) and 72 (RXD) on EXIO Connector A. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02pinctrl: sh-pfc: r8a7794: Remove bogus SCIF0 SCK pin dataGeert Uytterhoeven1-18/+0
SCIF0 on R-Car E2 does not have an SCK pin. "SCIF_CLK" is the (H)SCIF baud rate generation clock pin, which is not yet supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02pinctrl: sh-pfc: Confine legacy function GPIOs to SHGeert Uytterhoeven3-1/+10
Legacy function GPIOs are no longer used on ARM since commit a27c5cd1a08cc95c ("sh-pfc: sh73a0: Remove function GPIOs"). Extract its setup code into a separate function, and make all function GPIO related code and data depend on CONFIG_SUPERH. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-10-02pinctrl: sh-pfc: Remove empty gpio_function_free()Geert Uytterhoeven1-5/+0
gpio_chip.free() is optional, and can just be left unimplemented. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02pinctrl: sh-pfc: Stop calling gpiochip_add_pin_range() on DT platformsGeert Uytterhoeven1-15/+22
On platforms where the PFC/GPIO controller is instantiated from DT, the mapping between GPIOs and pins is set up using the "gpio-ranges" property in DT. Hence stop setting up the mapping from C code on DT platforms. This code is still used for SH or ARM-legacy platforms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-09-04Merge tag 'pinctrl-v4.3-1' of ↵Linus Torvalds8-53/+168
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ...
2015-08-26pinctrl: sh-pfc: r8a7794: add USB pin groupsShinobu Uehara1-0/+30
Add USB0/1 pin groups to R8A7794 PFC driver. Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> [Sergei: rebased, renamed, added changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-24pinctrl: sh-pfc: Implement pinconf power-source param for voltage switchingBen Hutchings2-2/+47
The pfc in the R8A7790 (and probably others in the R-Car gen 2 family) supports switching SDHI signals between 3.3V and 1.8V nominal voltage, and the SD driver should do that when switching to and from UHS modes. Add a flag for pins that have configurable I/O voltage and SoC operations to get and set the nominal voltage. Implement the pinconf power-source parameter using these operations. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-20sh-pfc: fix sparse GPIOs for R-Car SoCsSergei Shtylyov1-1/+1
The PFC driver causes the kernel to hang on the R-Car gen2 SoC based boards when the CPU_ALL_PORT() macro is fixed to reflect the reality, i.e. when the GPIO space becomes actually sparse. This happens because the _GP_GPIO() macro includes an indexed initializer which causes the "holes" (array entries filled with all 0s) between the groups of the existing GPIOs; and the driver can't cope with that. There seems to be no reason to use the indexed initializer, so we can remove the index specifier and so avoid the "holes". Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: Remove obsolete r8a7740 platform_device_id entryGeert Uytterhoeven1-3/+0
Since the removal of the r8a7740 legacy SoC code in commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: r8a7740: Remove obsolete multi-platform checkGeert Uytterhoeven1-4/+0
Since the removal of the r8a7740 legacy SoC code in commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: Remove obsolete sh73a0 platform_device_id entryGeert Uytterhoeven1-3/+0
Since the removal of the sh73a0 legacy SoC code in commit 9a9863987bf7307f ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: sh73a0: Remove obsolete multi-platform checkGeert Uytterhoeven1-4/+0
Since the removal of the sh73a0 legacy SoC code in commit 9a9863987bf7307f ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: Convert to platform_get_*()Geert Uytterhoeven1-25/+21
If the pin function controller (which can be a GPIO controller) is instantiated before the interrupt controllers, due to the ordering in the DTS, the irq domains for the interrupt controllers referenced by its "interrupts-extended" property cannot be found yet: irq: no irq domain found for /interrupt-controller@e61c0000 ! As the sh-pfc driver accesses the platform device's resources directly, it cannot find the (optional) IRQ resources, and thinks no interrupts are available. This may lead to failures later, when GPIOs are used as interupts: gpio-keys keyboard: Unable to claim irq 0; error -22 gpio-keys: probe of keyboard failed with error -22 To fix this, add support for deferred probing to sh-pfc, by converting the driver from direct platform device resource access to using the platform_get_resource() and platform_get_irq() helpers. Note that while this fixes the root cause worked around by commit e4ba0a9bddff3ba5 ("ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug"), I strongly recommend against reverting the workaround now, as this would lead to lots of probe deferrals in drivers relying on pinctrl. This may be reconsidered once the DT code starts taking into account phandle dependencies during device instantation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16pinctrl: sh-pfc: Accept standard function, pins and groups propertiesLaurent Pinchart1-8/+34
The "function", "pins" and "groups" pinmux and pinctrl properties have been standardized. Support them in addition to the custom "renesas,*" properties. New-style and old-style properties can't be mixed in DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16sh-pfc: r8a7791: remove non-existing GPIO pinsLaurent Pinchart1-2/+17
GPIO banks 1 and 7 are missing pins 26 to 31. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16sh-pfc: r8a7790: remove non-existing GPIO pinsLaurent Pinchart1-2/+19
GPIO banks 1 and 2 are missing pins 30 and 31. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16pinctrl: sh-pfc: r8a7794: add SDHI pin groupsShinobu Uehara1-0/+153
Add SDHI0/1/2 pin groups to R8A7794 PFC driver. Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> [Sergei: renamed SD data pins to match the driver, rebased, renamed, added changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16pinctrl: sh-pfc: r8a7794: add MMCIF pin groupsShinobu Uehara1-0/+46
Add MMCIF pin groups to R8A7794 PFC driver. Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> [Sergei: rebased, renamed, added changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-16pinctrl: sh-pfc: add R8A7794 PFC supportHisashi Nakamura5-0/+4021
Add PFC support for the R8A7794 SoC including pin groups for some on-chip devices such as ETH, I2C, INTC, MSIOF, QSPI, [H]SCIF... Sergei: squashed together several patches, fixed the MLB_CLK typo, added IRQ4.. IRQ9 pin groups, fixed IRQn comments, added ETH B pin group names, removed stray new line and fixed typos in the comments in the pinmux_config_regs[] initializer, removed the platform device ID, took into account limited number of signals in the GPIO1/5/6 controllers, added reasonable and removed unreasonable copyrights, modified the bindings document, renamed, added changelog. Changes in version 5: - resolved rejects, refreshed the patch; - added Laurent Pinchart's ACK. Changes in version 4: - reused the PORT_GP_26() macro to #define PORT_GP_28(). Changes in version 3: - removed the platform device ID; - added PORT_GP_26() and PORT_GP_28() macros, used them for GPIO1/5/6 in the CPU_ALL_PORT() macro. Changes in version 2: - rebased the patch. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada1-2/+2
Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-01pinctrl: Spelling s/reseved/reserved/Geert Uytterhoeven1-19/+19
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19pinctrl: sh-pfc: r8a7791: Add PWM pin groups and functionsYoshihiro Shimoda1-0/+125
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19pinctrl: sh-pfc: r8a7790: Add PWM pin groups and functionsYoshihiro Shimoda1-0/+101
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-12pinctrl: sh-pfc: r8a73a4: Remove obsolete multi-platform checkGeert Uytterhoeven1-4/+0
As of commit 9d07d414d4c33d86 ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"), r8a73a4 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 04:03:34 +0300