summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-sx150x.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-07pinctrl: sx150x: use new nested IRQ infrastructureLinus Walleij1-3/+7
Use the new gpiochip_irqchip_add_nested() and gpiochip_set_nested_irqchip() calls to properly created a nested irqchip and mark all child irqs properly with their parent IRQ. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505Peter Rosin1-0/+1
This fixes a problem where sx150x_regmap_reg_width() returns 8 for the data register (reg 0) for sx1504 where it should return 4, and return a correct 8 for sx1505 but for the wrong reason (both chips lack the 'advanced' register). This is not a real problem, since nothing depends on the function returning 4 or 8, and certainly not if it is returning 8 for the wrong reason. But fix this to avoid nasty surprises down the line. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'Peter Rosin1-10/+10
This matches the datasheets and is less confusing since the register has nothing to with advancing anything. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]Peter Rosin1-1/+2
The code assumes 8-bit or 16-bit width registers, but three of the chips (sx1501/sx1504/sx1507) are 4-bit. So, try to handle 4-bit chips as well, they leave the high part of each register unused. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507Peter Rosin1-0/+98
Untested, register offsets carefully copied from datasheets. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: sort chips by part numberPeter Rosin1-71/+71
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)Peter Rosin1-2/+2
All other registers on these chips are 8-bit, but reg_sense is 16-bits and therefore needs to be moved down one notch. This was apparently overlooked in the conversion to regmap, which only updated the register locations for the 16-bit chips. Fixes: 6489677f86c3 ("pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24pinctrl: sx150x: support setting multiple pins at oncePeter Rosin1-0/+17
If the chip does not have an oscio pin, all pins are configured in the same regmap register making it trivial to update all pins at once, so do that. If an oscio pin is present, there needs to be more locking in place to handle all cases correctly, so this is skipped. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-23pinctrl: sx150x: various spelling fixes and some white-space cleanupPeter Rosin1-7/+6
Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl: sx150x: fix up headersLinus Walleij1-2/+1
Include <linux/gpio/driver.h> rather than <linux/gpio.h> Drop <linux/pinctrl/machine.h>. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove magic numbers from sx150x_resetAndrey Smirnov1-2/+4
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove magic numbers from sx150x_irq_set_typeAndrey Smirnov1-4/+20
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Use handle_bad_irq instead of handle_edge_irqAndrey Smirnov1-1/+12
Althought the function passed as a "handler" during GPIO chip instantiation is not going to ever be called, specifying handle_edge_irq there makes for a rather confusing read, both because no "ack" callback in specified for irqchip and because there's no acking action is necessary. Specify handle_bad_irq instead a make a note of the situation. This commit should be a no-op behaviour wise. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Simplify interrupt handlerAndrey Smirnov1-12/+6
Make use of for_each_set_bit macro and reduce boilerplate code. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve oscio GPIO functionsAndrey Smirnov1-7/+11
Move actual code that configures oscio pin into a separate function and use it instead of calling sx150x_gpio_set to avoid calling sx150x_pin_is_oscio twice and correctly propagte error code in sx150x_gpio_direction_output. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Remove excessive lockingAndrey Smirnov1-54/+16
Gpiochip and irqchip aspects of this driver do not access any shared registers on the chip itself and atomicity of various regmap operations is ensured by that API's implementation, so there doesn't seem to be a reason to hold the lock in as many places as it is held now. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap APIAndrey Smirnov1-243/+284
The difference between 8 and 16 pin GPIO expanders can be accomodated by the means of regmap API without resorting to using driver-specific read/write accessors. This change, IMHO, brings the following benefits: - Replaces driver's idiosyncratic way of dealing with mult-register fields with regmap API, which, hopefuly, makes the code a bit easier for a new reader to understand - Removes various multi-read for-loop register read logic from various places in the code and puts it in a signle place - Removes ad-hoc IRQ register caching code in sx150x_irq_bus_sync_unlock, since that functionality is provided by regmap Besided aforementioned benefits this change also implements necessary RegSense byte swap necessary for SX1503 and SX1506 variants of the chip. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Convert driver to use regmap APIAndrey Smirnov1-46/+56
To allow for future code simplification Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve sx150x_init_misc for SX1504/5/6Andrey Smirnov1-0/+7
For Sx1504/5/6 only SX1506 has RegAdvanced, so put some code in place to account for that. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Move some code out of sx150x_init_hwAndrey Smirnov1-12/+26
Move the code configuring explicit IRQ acking into a standalone function to declutter sx150x_init_hw a bit and make that code somewhat less repetitious. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Fix incorrect constant in sx150x_init_hwAndrey Smirnov1-1/+1
According to the datasheet for SX1504/5/6, RegAdvanced's "Autoclear NINT" bit that turns the feature when set and disables it when cleared, so writing 0x04 to the register will have the opposite from desirable effect. Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Replace magic number in sx150x_init_hwAndrey Smirnov1-1/+4
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Add SX1503 specific dataAndrey Smirnov1-0/+25
Tested-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl-sx150x: Improve OF device matching codeAndrey Smirnov1-8/+13
Add proper device specific information to of_device_id table of the driver and add code to match against and fetch said data from it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24pinctrl: Add SX150X GPIO Extender Pinctrl DriverNeil Armstrong1-0/+1062
Since the I2C sx150x GPIO expander driver uses platform_data to manage the pins configurations, rewrite the driver as a pinctrl driver using pinconf to get/set pin configurations from DT or debugfs. The pinctrl driver is functionnally equivalent as the gpio-only driver and can use DT for pinconf. The platform_data confirmation is dropped. This patchset removed the gpio-only driver and selects the Pinctrl driver config instead. This patchset also migrates the gpio dt-bindings to pinctrl and add the pinctrl optional properties. The driver was tested with a SX1509 device on a BeagleBone black with interrupt support and on an X86_64 machine over an I2C to USB converter. This is a fixed version that builds and runs on non-OF platforms and on arm based OF. The GPIO version is removed and the bindings are also moved to the pinctrl bindings. Changes since v2 - rebased on v4.9-rc1 - removed MODULE_DEVICE_TABLE as in upstream bb411e771b0e ("gpio: sx150x: fix implicit assumption module.h is present") Changes since v1 - Fix Kconfig descriptions on pinctrl and gpio - Fix Kconfig dependency - Remove oscio support for non-789 devices - correct typo in dt bindings - remove probe reset for non-789 devices Changes since RFC - Put #ifdef CONFIG_OF/CONFIG_OF_GPIO to remove OF code for non-of platforms - No more rely on OF_GPIO config - Moved and enhanced bindings to pinctrl bindings - Removed gpio-sx150x.c - Temporary select PINCTRL_SX150X when GPIO_SX150X - Temporary mark GPIO_SX150X as deprecated Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> ested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 01:47:52 +0300