summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-coh901.c
AgeCommit message (Collapse)AuthorFilesLines
2016-02-15pinctrl: coh901: fix initconst annotationArnd Bergmann1-1/+1
Clang correctly points out that the section attribute for u300_gpio_confdata is in the wrong place: drivers/pinctrl/pinctrl-coh901.c:130:37: error: '__section__' attribute only applies to functions and global variables This moves it from the type name to the variable, so it actually gets discarded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: u300: use gpiochip data pointerLinus Walleij1-20/+11
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: coh901: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski1-20/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-17pinctrl/coh901: Prepare u300_gpio_irq_handler for irq argument removalThomas Gleixner1-1/+2
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
2015-07-17pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-2/+2
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-22pinctrl: remove all usage of gpio_remove ret val in driver/pinctlabdoulaye berthe1-8/+2
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26pinctrl: coh901: convert driver to use gpiolib irqchipLinus Walleij1-151/+53
This converts the COH901 pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-18pinctrl: coh901: move irq line locking to resource callbacksLinus Walleij1-5/+23
This switches the COH901 GPIO driver over to using the .request_resources() and .release_resources() callbacks from the irqchip vtable and separate the calls from the .enable() and .disable() callbacks as the latter cannot really say no to a request, whereas the resource callbacks can. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16pinctrl: coh901: mark GPIO lines used for IRQLinus Walleij1-0/+5
When an IRQ is started on a GPIO line, mark this GPIO as IRQ in the gpiolib so we can keep track of the usage centrally. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
2013-06-20Merge tag 'u300-multiplatform' of ↵Arnd Bergmann1-16/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc From Linus Walleij: Device Tree and Multiplatform support for U300: - Add devicetree support to timer, pinctrl (probe), I2C block, watchdog, DMA controller and clocks. - Piecewise add a device tree containing all peripherals. - Delete the ATAG boot path. - Delete redundant platform data and board files. - Convert to multiplatform. * tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (40 commits) ARM: u300: switch to using syscon regmap for board ARM: u300: Update MMC configs for u300 defconfig spi: pl022: use DMA by default when probing from DT pinctrl: get rid of all platform data for coh901 ARM: u300: convert MMC/SD clock to device tree ARM: u300: move the gated system controller clocks to DT i2c: stu300: do not request a specific clock name clk: move the U300 fixed and fixed-factor to DT ARM: u300: remove register definition file ARM: u300: add syscon node ARM: u300 use module_spi_driver to register driver ARM: u300: delete remnant machine headers ARM: u300: convert to multiplatform ARM: u300: localize <mach/u300-regs.h> ARM: u300: delete <mach/irqs.h> ARM: u300: delete <mach/hardware.h> ARM: u300: push down syscon registers ARM: u300: remove deps from debug macro ARM: u300: move debugmacro to debug includes ARM: u300: delete all static board data ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-17pinctrl: get rid of all platform data for coh901Linus Walleij1-14/+9
This deletes the dependency on any platform data for the COH901 pin controller. There is only one user in the kernel, and if we at some point want to support more variants, they shall provide their variant info through the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16pinctrl: coh901: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-31pinctrl: coh901: add device tree supportLinus Walleij1-2/+10
This makes it possible to probe the COH901 pinctrl driver from the device tree, and assigned the device tree node in the gpio_chip so we can look up cross-references from the device tree. Start grabbing the per-port (bank) IRQs by index instead of by name so we don't have to look up the IRQs by name going forward. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: Don't override the error code in probe error handlingAxel Lin1-1/+2
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-18drivers/pinctrl: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-04-03pinctrl: coh901: Fix error checking in u300_gpio_to_irqAxel Lin1-2/+5
The pointer "port" is always not NULL if gpio->port_list is not empty. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-28pinctrl: coh901: Fix checkpatch errorSachin Kamat1-1/+1
Fixes the following checkpatch error: ERROR: space required before the open parenthesis '(' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22pinctrl: Convert to devm_ioremap_resource()Thierry Reding1-5/+3
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21pinctrl/u300/coh901: stop spawning pinctrl from GPIOLinus Walleij1-6/+0
Let's stop spawning the pinctrl driver from the GPIO driver, we have these two mechanisms broken apart now, and they can each probe in isolation. If the GPIO driver cannot find its pin controller (pinctrl-u300), the pin controller core will tell it to defer probing. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-21pinctrl/u300/coh901: let the gpio_chip register the rangeLinus Walleij1-2/+45
Instead of having the pinctrl driver register the GPIO range for the gpio_chip, making it necessary to instantiate the pin controller from the GPIO driver and pass the GPIO chip as platform data, now let the GPIO chip driver register it's own ranges and have the pinctrl driver look up the GPIO chip from the pinctrl core as necessary. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15pinctrl: coh901: Return proper error if irq_domain_add_linear() failsAxel Lin1-2/+4
Return -ENOMEM instead of 0 if irq_domain_add_linear fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl/coh901: convert to use managed resourcesLinus Walleij1-43/+19
This switches the COH 901 pin controller to use managed resources (devm_*) for memory remaps, clocks, etc. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11pinctrl/coh901: use irqdomain, allocate irqdescsLinus Walleij1-14/+46
This switches the COH 901 pinctrl driver to allocate its GPIO IRQs dynamically, and start to use a linear irqdomain to map from the hardware IRQs. This way we can cut away the complex allocation of IRQ numbers from the <mach/irqs.h> file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13pinctrl/coh901: move header to platform data dirLinus Walleij1-1/+1
Move the platform-specific COH901 pin control header out of the ARM tree and down into the proper platform data include directory. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-13pinctrl/coh901: retire ancient GPIO block versionsLinus Walleij1-176/+42
As the non-U335 U300 variants are retired from the ARM tree, also delete the pinctrl driver codepaths for these variants. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-03pinctrl/coh901: use clk_prepare_[en|dis]able()Linus Walleij1-3/+3
The COH901 GPIO driver did not prepare or unprepare its clock, so let us fix it to do so. Acked-by: Pankaj Jangra <jangra.pankaj9@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: mark const init data with __initconst instead of __initdataUwe Kleine-König1-2/+2
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-13pinctrl: support pinconfig on the U300Linus Walleij1-8/+69
This adds pin configuration support for the U300 driver pair, we can now read out the biasing and drive mode in debugfs and configure it using the new configuration API. ChangeLog v1->v2: - Migrate to pin config and generic pin config changes. ChangeLog v2->v3: - Adjust to generic pin config changes in v7 patch set. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-13pinctrl/coh901: use generic pinconf enums and parametersLinus Walleij1-43/+13
Adjust the COH 901 driver to use the standard enums for biasing and driving pins, alter signature of config function to suit the framework. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-22pinctrl: spawn U300 pinctrl from the COH901 GPIOLinus Walleij1-2/+8
This solves the riddle on how the U300 pin controller shall be able to reference the struct gpio_chip even though these are two separate drivers: spawn the pinctrl child from the GPIO driver and pass in the struct gpio_chip as platform data. In the process we rename the U300 "pinmux-u300" to "pinctrl-u300" so as not to confuse. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-11pinctrl: move generic functions to the pinctrl_ namespaceLinus Walleij1-2/+2
Since we want to use the former pinmux handles and mapping tables for generic control involving both muxing and configuration we begin refactoring by renaming them from pinmux_* to pinctrl_*. ChangeLog v1->v2: - Also rename the PINMUX_* macros in machine.h to PIN_ as indicated in the documentation so as to reflect the generic nature of these mapping entries from now on. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-11pinctrl: break out a pinctrl consumer headerLinus Walleij1-1/+1
This breaks out a <linux/pinctrl/consumer.h> header to be used by all pinmux and pinconfig alike, so drivers needing services from pinctrl does not need to include different headers. This is similar to the approach taken by the regulator API. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl/coh901: driver to request its pinsLinus Walleij1-0/+21
This makes the COH 901 driver request muxing of its GPIO pins from the pinmux-u300 driver using the standard API calls. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: move the U300 GPIO driver to pinctrlLinus Walleij1-0/+917
This driver will be converted to a dual GPIO + pinctrl driver since it supports biasing and driving control options. Hopefully it can serve as an example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 00:16:24 +0300