summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/meson
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16pinctrl: meson-gxl: add tsin_a pinsJerome Brunet1-0/+36
Add Tsin A pins to bank DV and X. We don't have a driver for the tsin yet but since the tsin A pinmux is enabled by default at boot time, declaring this pinmux is required to properly operate on GPIOX. Without this change, GPIOX 8, 9, 10 and 11 can't be driven as GPIO output as the tsin A seems to have priority. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: meson: add interrupts to pinctrl dataJerome Brunet5-46/+63
Add GPIO interrupt information to pinctrl data. Added to the original version from Jerome was data for Meson GXL. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: meson-gxbb: remove non-existing pin GPIOX_22Heiner Kallweit1-1/+0
After commit 34e61801a3b9 "pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry" I started to get the following warning: "meson-pinctrl c8834000.periphs:pinctrl@4b0: names 119 do not match number of GPIOs 120" It turned out that not the mentioned commit has a problem, it just revealed another problem which had existed before. There is no PIN GPIOX_22 on Meson GXBB. Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Add Ethernet PHY LEDS pinsNeil Armstrong1-0/+10
The Amlogic Meson GXL SoCs embeds an 10/100 Ethernet PHY, this patchs enables the Link and Activity LEDs signals. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Add CEC pinsNeil Armstrong1-0/+10
Add the AO and EE domain CEC pins for the Amlogic Meson GXL SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxbb: Add CEC pinsNeil Armstrong1-0/+10
Add the AO and EE domain CEC pins for the Amlogic Meson GXBB SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Fix typo in AO SPDIF pinsNeil Armstrong1-2/+2
The AO SPDIF pins were incorrectly defined with the EE pin offset. Fixes: b840d649f9ec ("pinctrl: meson: gxl: add spdif output pins") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Fix typo in AO I2S pinsNeil Armstrong1-2/+2
The AO I2S pins were incorrectly defined with the EE pin offset. Fixes: 2899adf0422 ("pinctrl: meson: gxl: add i2s output pins") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxbb: Add missing GPIODV_18 pin entryNeil Armstrong1-0/+1
GPIODV_18 entry was missing in the original driver push. Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Add missing GPIODV_18 pin entryNeil Armstrong1-0/+1
GPIODV_18 entry was missing in the original driver push. Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxbb: Add SPI pins for SPICC controllerNeil Armstrong1-0/+14
The SPICC controller has dedicated SPI pins, this patchs add the pins definition in the GXBB pinctrl driver Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: meson-gxl: Add SPI pins for the SPICC controllerNeil Armstrong1-0/+14
The SPICC controller has dedicated SPI pins, this patchs add the pins definition in the GXL pinctrl driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: meson: meson8: add the AO HDMI CEC pinMartin Blumenstingl1-0/+9
This adds another missing pin found in the Meson8 SoCs. Currently there's no driver which would use this pin yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: meson: meson8: add support for the AO remote output pinMartin Blumenstingl1-1/+3
This adds another missing pin found in the Meson8 SoCs. Currently there's no driver which would use this pin yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: meson: meson8: add support for the I2S and SPDIF pinsMartin Blumenstingl1-0/+52
This adds support for the I2S and SPDIF input and output pins, similar to what we have on GXBB and GXL. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: meson: meson8: add the PWM pinsMartin Blumenstingl1-0/+62
This adds the missing pins for the PWM controllers found in Amlogic Meson8 SoCs. This includes the pins for PWM_A, PWM_B, PWM_C, PWM_D, PWM_E and PWM_F controllers. There is an additional PWM function with the name PWM_VS in the vendor kernel sources which seems to be used for external video input. Thus it's not part of this change as the IP block behind the pwm-meson driver is not responsible for these pins. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-03Merge tag 'pinctrl-v4.12-1' of ↵Linus Torvalds4-34/+227
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ...
2017-04-07pinctrl: meson: meson8b: rename the NAND DQS pin definitionsMartin Blumenstingl1-6/+6
The NAND DQS pins are currently named nand_dqs_0 and nand_dqs_1. However, they both seem to have the same function, just exposed on different pins (unlike the ethernet TX pins for example, where there's eth_txd0..3 - all of these can be active at the same time as they are different data lines). Rename the NAND DQS pins to nand_dqs_15 and nand_dqs_18 to reflect that it's the same functionality just exposed on different pins (BOOT_15 and BOOT_18). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07pinctrl: meson: meson8b: fix the NAND DQS pinsMartin Blumenstingl1-2/+2
The nand_groups table uses different names for the NAND DQS pins than the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0). This prevents using the NAND DQS pins in the devicetree. Fix this by ensuring that the GROUP() definition and the meson8b_cbus_groups use the same name for these pins. Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson: gxl: add spdif output pinsJerome Brunet1-0/+18
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson: gxl: add i2s output pinsJerome Brunet1-0/+31
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson: gxbb: add spdif output pinsJerome Brunet1-0/+18
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson: gxbb: add i2s output pinsJerome Brunet1-0/+31
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson: use gpio-ranges from DTNeil Armstrong1-13/+1
When trying to add a gpio-hog, we enter a weird loop where the gpio-ranges is needed when gpiochip_add_data() is called but in the current implementation the ranges are added from the driver afterwards. A simple solution is to rely on the DR gpio-ranges attribute and remove the call to gpiochip_add_pin_range(). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28pinctrl: meson-gxl: Fix inverted registers and add missing pinsNeil Armstrong1-15/+68
Fix some inverted bit numbers in some pinctrl groups and add missing pins and groups to be in pair with the GXBB pinctrl pins definition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23pinctrl: meson-gxbb: Fix typo in i2c ao groupsNeil Armstrong1-2/+2
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23pinctrl: meson: gxl: add the missing PWM pin definitionsMartin Blumenstingl1-0/+54
This adds support for the missing PWM pins on Meson GXL SoCs, namely: - PWM_A - PWM_B - PWM_C - PWM_F (GPIOX_7 and GPIOCLK_1 can be selected as output) - PWM_AO_A (GPIOAO_3 and GPIOAO_8 can be selected as output) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij3-9/+7
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
2017-01-26pinctrl: meson: meson-gxl: add the pwm_ao_b pinMartin Blumenstingl1-0/+8
This adds support for the pwm_ao_b pin. Unfortunately the registers for the pwm_ao pins are not documented at all. The source for the pwm_ao_b pin from this patch is the Khadas VIM GPL kernel source, which sets bit 3 and unsets bits 4 and 31 to enable the PWM LEDs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-pinctrl-genprops' into develLinus Walleij1-2/+0
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg1-2/+0
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-19pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXMMartin Blumenstingl2-8/+6
The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART functions are: - GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26) - GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25) - GPIOAO_4: Func2 = UART_TX_AO_B (bit 24) - GPIOAO_5: Func2 = UART_RX_AO_B (bit 25) The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1. The old definition of uart_AO_B however was broken, as it used GPIOAO_0 for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX (which does not make any sense). This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory, but all existing hardware uses uart_AO_A there). The fix for GXBB and GXL/GXM is identical since it seems that these specific pins are identical on both SoC variants. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: meson: Add HDMI HPD/DDC pins functionsNeil Armstrong2-0/+38
Add pinctrl functions for HDMI HPD pin and DDC pins on Amlogic Meson GXL and GXBB SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-29pinctrl: meson: fix gpio request disabling other modesNeil Armstrong1-1/+1
The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-05pinctrl: meson: Add GXL pinctrl definitionsNeil Armstrong4-1/+601
Add support for the Amlogic Meson GXL SoC, this is a partially complete definition only based on the Amlogic Vendor tree. This definition differs a lot from the GXBB and needs a separate entry. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge tag 'v4.8-rc6' into develLinus Walleij1-7/+1
Linux 4.8-rc6
2016-09-15pinctrl: amlogic: gxbb: add i2c pinsJerome Brunet1-0/+30
Add EE domains pins for the i2c devices A,B,C Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add nand pinsJerome Brunet1-0/+23
Add EE domains pins for the NAND flash controller. Even tough we have no driver for the NAND flash controller yet, we need to have these pins in pinctrl as the actual pin are shared with the spifc controller. The bootloader on the S905-P200 setup pinmux for the NAND controller so we need the kernel to properly deactivate this if necessary. Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: amlogic: gxbb: add spi nor pinsJerome Brunet1-0/+14
Add EE domains pins for the SPI flash controller Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13pinctrl: meson-gxbb: add the missing SDIO interrupt pinMartin Blumenstingl1-1/+3
This adds the SDIO interrupt pin which can be used by sd_emmc_a. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 29885a656511 ("pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller") Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controllerMartin Blumenstingl1-0/+19
sd_emmc_a is used a controller for the SDIO modules. This adds the pin configuration for the SDIO controller. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-24pinctrl: meson-gxbb: add pins for PWMNeil Armstrong1-0/+79
Add support for PWM pins, for EE and AO domains. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: amlogic: gxbb: add the IR remote input pinMartin Blumenstingl1-0/+8
This adds the IR remote receiver to the AO domain devices. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: meson: get rid of unneeded domain structuresBeniamino Galvani5-228/+118
The driver originally supported more domains (register ranges) per pinctrl device, but since commit 9dab1868ec0d ("pinctrl: amlogic: Make driver independent from two-domain configuration") each device gets assigned a single domain and we instantiate multiple pinctrl devices in the DT. Therefore, now the 'meson_domain' and 'meson_domain_data' structures don't have any reason to exist and can be removed to make the model simpler to understand. This commit doesn't change behavior. Tested on a Odroid-C2. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: meson: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun1-7/+1
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Fixes: e649f7ec8c5f ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add ethernet pinsKevin Hilman1-0/+39
Add EE domain pins for ethernet interface. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add more UART pinsKevin Hilman1-0/+48
Add EE domain pins for UART A, B & C. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add EMMC and SD pinsKevin Hilman1-0/+41
Add EE domain pins for eMMC and SD card. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31pinctrl: amlogic: gxbb: add UART_AO_B, I2CKevin Hilman1-1/+34
Add pins for some more AO domain devices: UART_AO_B and I2C master & slave. Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11pinctrl: meson: Fix eth_tx_en bit indexAlexander Müller1-1/+1
Fix pinctrl eth_tx_en bit index according to Hardkernel ODROID-C1 datasheet. Signed-off-by: Alexander Müller <serveralex@gmail.com> Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 15:37:51 +0300