summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29Merge tag 'v4.12-rc7' into develLinus Walleij1-5/+19
Linux 4.12-rc7
2017-06-09pinctrl: intel: Add Intel Cannon Lake PCH pin controller supportMika Westerberg3-0/+451
This adds pinctrl/GPIO support for Intel Cannon Lake PCH. The Cannon Lake PCH GPIO is based on newer version of the Intel GPIO hardware. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: intel: Make it possible to specify mode per pin in a groupMika Westerberg2-8/+26
On some SoCs not all pins in a group use the same mode when a certain function is muxed out of them. This makes it possible to specify mode per pin as an array instead in addition to single integer. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: intel: Add support for variable size pad groupsMika Westerberg3-56/+176
The Intel GPIO hardware has a concept of pad groups, which means 1 to 32 pads occupying their own GPI_IS, GPI_IE, PAD_OWN and so on registers. The existing hardware has the same amount of pads in each pad group (except the last one) so it is possible to use community->gpp_size to calculate start offset of each register. With the next generation SoCs the pad group size is not always the same anymore which means we cannot use community->gpp_size for register offset calculations directly. To support variable size pad groups we introduce struct intel_padgroup that can be filled in by the client drivers according the hardware pad group layout. The core driver will always use these when it performs calculations for pad register offsets. The core driver will automatically populate pad groups based on community->gpp_size if the driver does not provide any. This makes sure the existing drivers still work as expected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systemsMika Westerberg1-4/+17
It turns out there are quite many Chromebooks out there that have the same keyboard issue than Acer Chromebook. All of them are based on Intel_Strago reference and report their DMI_PRODUCT_FAMILY as "Intel_Strago" (Samsung Chromebook 3 and Cyan Chromebooks are exceptions for which we add separate entries). Instead of adding each machine to the quirk table, we use DMI_PRODUCT_FAMILY of "Intel_Strago" that hopefully covers most of the machines out there currently. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Suggested: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: cherryview: Add terminate entry for dmi_system_id tablesWei Yongjun1-1/+2
Make sure dmi_system_id tables are NULL terminated. Fixes: 703650278372 ("pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-03Merge tag 'pinctrl-v4.12-1' of ↵Linus Torvalds1-0/+47
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.12 cycle. The extra week before the merge window actually resulted in some of the type of fixes that usually arrive after the merge window already starting to trickle in from eager developers using -next, I'm impressed. I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal with the onset of Samsung patches. It works great. Apart from that it is a boring round, just incremental updates and fixes all over the place, no serious core changes or anything exciting like that. The most pleasing to see is Julia Cartwrights work to audit the irqchip-providing drivers for realtime locking compliance. It's one of those "I should really get around to looking into that" things that have been on my TODO list since forever. Summary: Core changes: - add bi-directional and output-enable pin configurations to the generic bindings and generic pin controlling core. New drivers or subdrivers: - Armada 37xx SoC pin controller and GPIO support. - Axis ARTPEC-6 SoC pin controller support. - AllWinner A64 R_PIO controller support, and opening up the AllWinner sunxi driver for ARM64 use. - Rockchip RK3328 support. - Renesas R-Car H3 ES2.0 support. - STM32F469 support in the STM32 driver. - Aspeed G4 and G5 pin controller support. Improvements: - a whole slew of realtime improvements to drivers implementing irqchips: BCM, AMD, SiRF, sunxi, rockchip. - switch meson driver to get the GPIO ranges from the device tree. - input schmitt trigger support on the Rockchip driver. - enable the sunxi (AllWinner) driver to also be used on ARM64 silicon. - name the Qualcomm QDF2xxx GPIO lines. - support GMMR GPIO regions on the Intel Cherryview. This fixes a serialization problem on these platforms. - pad retention support for the Samsung Exynos 5433. - handle suspend-to-ram in the AT91-pio4 driver. - pin configuration support in the Aspeed driver. Cleanups: - the final name of Rockchip RK1108 was RV1108 so rename the driver and variables to stay consistent" * tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl: mediatek: Add missing pinctrl bindings for mt7623 pinctrl: artpec6: Fix return value check in artpec6_pmx_probe() pinctrl: artpec6: Remove .owner field for driver pinctrl: tegra: xusb: Silence sparse warnings ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller" pinctrl: make artpec6 explicitly non-modular pinctrl: aspeed: g5: Add pinconf support pinctrl: aspeed: g4: Add pinconf support pinctrl: aspeed: Add core pinconf support pinctrl: aspeed: Document pinconf in devicetree bindings pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl pinctrl: stm32: Add STM32F469 MCU support Documentation: dt: Remove ngpios from stm32-pinctrl binding pinctrl: stm32: replace device_initcall() with arch_initcall() pinctrl: stm32: add possibility to use gpio-ranges to declare bank range pinctrl: armada-37xx: Add gpio support pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers pinctrl: core: Make pinctrl_init_controller() static pinctrl: generic: Add bi-directional and output-enable ...
2017-04-11pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work againMika Westerberg1-2/+24
After commit 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain") the driver does not add all GPIOs to the irqdomain. The reason for that is that those GPIOs cannot generate IRQs at all, only GPEs (General Purpose Events). This causes Linux virtual IRQ numbering to change. However, it seems some CYAN Chromebooks, including Acer Chromebook hardcodes these Linux IRQ numbers in the ACPI tables of the machine. Since the numbering is different now, the IRQ meant for keyboard does not match the Linux virtual IRQ number anymore making the keyboard non-functional. Work this around by adding special quirk just for these machines where we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell based machines will not be affected by the change. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Fixes: 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain") Reported-by: Adam S Levy <theadamlevy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23pinctrl: cherryview: Add support for GMMR GPIO opregionHans de Goede1-0/+47
On some Cherry Trail devices the ASL uses the GMMR GPIO to access GPIOs so as to serialize MMIO accesses to GPIO registers with the OS, because: "Due to a silicon issue, a shared lock must be used to prevent concurrent accesses across the 4 GPIO controllers. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information." This commit adds support for this opregion, this fixes a number of ASL errors on my Ezpad mini3 tablet and makes the otg port device/host muxing which is controlled in firmware on this model work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-22Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds9-42/+687
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-02-13pinctrl: intel: unlock on error in intel_config_set_pull()Dan Carpenter1-2/+4
We need to unlock before returning -EINVAL on this error path. Fixes: 04cc058f0c52 ("pinctrl: intel: Add support for 1k additional pull-down") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handlerAlexander Stein1-0/+2
According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Debounce register is one per communityAndy Shevchenko1-3/+10
Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Rectify debounce support (part 2)Andy Shevchenko1-4/+8
The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: intel: Add Intel Gemini Lake pin controller supportMika Westerberg3-0/+521
This driver adds pinctrl/GPIO support for Intel Gemini Lake SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. This commit includes material from David E. Box. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: intel: Add support for 1k additional pull-downMika Westerberg2-1/+18
The next generation Intel GPIO hardware supports additional 1k pull-down per-pad. Add support for this to the Intel core pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: intel: Add support for hardware debouncerMika Westerberg2-2/+133
The next generation Intel GPIO hardware has two additional registers PADCFG2 and PADCFG3. The latter is marked as reserved but the former includes configuration for per-pad hardware debouncer. This patch adds support for that in the Intel pinctrl core driver. Since these are additional features on top of the current generation hardware, we use revision number and feature flags to enable this if detected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: broxton: No need to take pointer of a pointerAndy Shevchenko1-2/+2
There is no need to take pointer of a pointer to an array of SoC data in platform driver. Do it in the same way as it's done for ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij3-26/+45
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
2017-01-30pinctrl: intel: merrifield: Add missed check in mrfld_config_set()Andy Shevchenko1-0/+3
Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26pinctrl: baytrail: Fix debugfs offset outputAlexander Stein1-1/+1
Apparently each GPIO pad's register are 16 bytes, so multiply the pad_map by that. The same is done in byt_gpio_reg the only other place where pad_map is used. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26pinctrl: broxton: Rename apl-pinctrl driverAndy Shevchenko1-1/+1
While we have no users yet rename the platform driver to use the same pattern as the rest of Intel SoCs, i.e. use full SoC name in 'apollolake-pinctrl'. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-pinctrl-genprops' into develLinus Walleij1-2/+2
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg1-2/+2
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-12pinctrl: baytrail: Do not add all GPIOs to IRQ domainAndy Shevchenko1-3/+8
When DIRECT_IRQ_EN is set, the pin is routed directly to the IO-APIC bypassing the GPIO driver completely. However, the mask register is still used to determine if the pin is supposed to generate IRQ or not. So with commit 3ae02c14d964 the IRQ core masks all IRQs (because of handle_bad_irq()) the pin connected to the touchscreen gets masked as well and hence no interrupts. To make this all work as expected we do not add those GPIOs to the IRQ domain that can actually propagate interrupts. Fixes: 3ae02c14d964 ("pinctrl: intel: set default handler to be handle_bad_irq()") Reported-by: Robert R. Howell <rhowell@uwyo.edu> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: baytrail: Convert to use devm_*()Andy Shevchenko1-12/+5
This simplifies error handling and allows us to drop error path handlers completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: baytrail: Rectify debounce supportAndy Shevchenko1-11/+17
The commit 658b476c742f ("pinctrl: baytrail: Add debounce configuration") implements debounce for Baytrail pin control, but seems wasn't tested properly. The register which keeps debounce value is separated from the configuration one. Writing wrong values to the latter will guarantee wrong behaviour of the driver and even might break something physically. Besides above there is missed case how to disable it, which is actually done through the bit in configuration register. Rectify implementation here by using proper register for debounce value. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: intel: Convert to use devm_gpiochip_add_data()Mika Westerberg4-23/+4
This simplifies error handling and allows us to drop intel_pinctrl_remove() completely. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: intel: Set pin direction properlyAndy Shevchenko1-11/+19
There are two bits in the PADCFG0 register to configure direction, one per TX/RX buffers. For now we wrongly assume that the GPIO is always requested before it is being used, which is not true when the GPIO is used through irqchip. In this case the GPIO is never requested and we never enable RX buffer for it. Fix this by setting both bits accordingly. Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: broxton: Use correct PADCFGLOCK offsetMika Westerberg1-1/+1
PADCFGLOCK (and PADCFGLOCK_TX) offset in Broxton actually starts at 0x060 and not 0x090 as used in the driver. Fix it to use the correct offset. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-13Merge tag 'pinctrl-v4.10-1' of ↵Linus Torvalds4-3/+44
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...
2016-12-07pinctrl: intel: set default handler to be handle_bad_irq()Andy Shevchenko2-2/+2
We switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-05pinctrl: cherryview: Prevent possible interrupt storm on resumeMika Westerberg1-3/+4
When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Cc: stable@vger.kernel.org Reported-by: Christian Steiner <christian.steiner@outlook.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-05pinctrl: cherryview: Serialize register access in suspend/resumeMika Westerberg1-0/+10
If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04pinctrl: cherryview: Drop ctrlX prefix from the pin debugfs outputMika Westerberg1-1/+1
Printing the prefix does not provide any additional information. In addition this makes the output look more consistent with pinctrl-intel.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-29pinctrl: intel: merrifield: Add pin config group handlersAndy Shevchenko1-0/+41
Pin config get() and set() handlers for pin groups were previously not implemented by this driver. The pin_config_group_set() is particularly useful for applying a common config setting to all pins in a specified group with a single call, without the caller needing to reference each individual pin by name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: intel: Only restore pins that are used by the driverMika Westerberg1-2/+23
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361 Reported-by: AceLan Kao <acelan.kao@canonical.com> Tested-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-18pinctrl: baytrail: Fix lockdepVille Syrjälä1-1/+2
Initialize the spinlock before using it. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0 Call Trace: [<ffffffff8133d597>] dump_stack+0x67/0x90 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0 [<ffffffff810cede1>] ? save_trace+0x41/0xd0 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0 ... Based on the diff it looks like the problem was introduced in commit 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") but I wasn't able to verify that empirically as the parent commit just oopsed when I tried to boot it. Cc: Cristina Ciocan <cristina.ciocan@intel.com> Cc: stable@vger.kernel.org Fixes: 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23Merge branch 'fixes' into develLinus Walleij1-1/+1
2016-09-23pinctrl: intel: Configure GPIO chip IRQ as wakeup interruptsNilesh Bacchewar1-28/+5
On some Intel BXT platform, wake-up from suspend-to-idle on pressing power-button is not working. Its noticed that gpio-keys driver marking the second level IRQ/power-button as wake capable but Intel pintctrl driver is missing to mark GPIO chip/controller IRQ which first level IRQ as wake cable if its GPIO pin IRQ is wakeble. So, though the first level IRQ gets generated on power-button press, since it is not marked as wake capable resume/wake-up flow is not happening. Intel pintctrl/GPIO driver need to mark GPIO chip/controller IRQ (first level IRQ) as wake capable iff GPIO pin's IRQ (second level IRQ) is marked as wake cable. Changes in v2: - Add missing irq initialisation. Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23pinctrl: cherryview: Convert to use devm_gpiochip_add_data()Mika Westerberg1-18/+3
This simplifies the error handling and allows us to drop the whole chv_pinctrl_remove() function. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domainMika Westerberg1-1/+33
It turns out that for north and southwest communities, they can only generate GPIO interrupts for lower 8 interrupts (IntSel value). The upper part (8-15) can only generate GPEs (General Purpose Events). Now the reason why EC events such as pressing hotkeys does not work if we mask all the interrupts is that in order to generate either interrupts or GPEs the INTMASK register must have that particular interrupt unmasked. In case of GPEs the CPU does not trigger normal interrupt (and thus the GPIO driver does not see it) but instead it causes SCI (System Control Interrupt) to be triggered with the GPE in question set. To make this all work as expected we only add those GPIOs to the IRQ domain that can actually generate interrupts (IntSel value 0-7) and skip others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: intel: merrifield: fix dup size in probeVincent Stehlé1-1/+1
In function mrfld_pinctrl_probe(), when duplicating the mrfld_families array the requested memory region length is multiplied once too many by the number of elements in the original array. Fix this to spare some memory. Fixes: 4e80c8f505741cbd ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-22pinctrl: cherryview: Do not mask all interrupts in probeMika Westerberg1-3/+2
The Cherryview GPIO controller has 8 or 16 wires connected to the I/O-APIC which can be used directly by the platform/BIOS or drivers. One such wire is used as SCI (System Control Interrupt) which ACPI depends on to be able to trigger GPEs (General Purpose Events). The pinctrl driver itself uses another IRQ resource which is wire OR of all the 8 (or 16) wires and follows what BIOS has programmed to the IntSel register of each pin. Currently the driver masks all interrupts at probe time and this prevents these direct interrupts from working as expected. The reason for this is that some early stage prototypes had some pins misconfigured causing lots of spurious interrupts. We fix this by leaving the interrupt mask untouched. This allows SCI and other direct interrupts work properly. What comes to the possible spurious interrupts we switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Reported-by: Yu C Chen <yu.c.chen@intel.com> Reported-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: intel: merrifield: Add missed headerAndy Shevchenko1-0/+1
On x86 builds the absense of <linux/io.h> makes static analyzer and compiler unhappy which fails to build the driver. CHECK drivers/pinctrl/intel/pinctrl-merrifield.c drivers/pinctrl/intel/pinctrl-merrifield.c:518:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:570:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:575:9: error: undefined identifier 'writel' drivers/pinctrl/intel/pinctrl-merrifield.c:645:17: error: undefined identifier 'readl' CC drivers/pinctrl/intel/pinctrl-merrifield.o drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’: drivers/pinctrl/intel/pinctrl-merrifield.c:518:10: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] value = readl(bufcfg); ^ drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’: drivers/pinctrl/intel/pinctrl-merrifield.c:575:2: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] writel(value, bufcfg); ^ cc1: some warnings being treated as errors Add header to the top of the module. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-29Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds7-92/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-07-11pinctrl: intel: Protect set wake flow by spin lockAndy Shevchenko1-0/+5
It seems intel_gpio_irq_wake() misses lock protection against I/O flow. Use spin lock here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: intel: Add Intel Merrifield pin controller supportAndy Shevchenko3-0/+923
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23pinctrl: baytrail: Fix mingled clock pinsCristina Ciocan1-3/+3
Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-18pinctrl: intel: Prevent force threading of the interrupt handlerMika Westerberg1-1/+2
The pinctrl-intel needs to use request_irq() instead of chained interrupt handling because it shares the interrupt with multiple GPIO host controllers found on Intel CPUs. In -rt all such interrupts are forced to run in thread context which triggers following warning: WARNING: CPU: 0 PID: 530 at kernel/irq/handle.c:151 handle_irq_event_percpu+0x23d/0x240 irq 348 handler irq_default_primary_handler+0x0/0x10 enabled interrupts Modules linked in: CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060 0000000000000000 ffff88007a257c98 ffffffff812d8494 ffff88007a257ce8 0000000000000000 ffff88007a257cd8 ffffffff8105e554 000000977a257d90 ffff88007a37a380 000000000000015c 0000000000000002 0000000000000000 Call Trace: [<ffffffff812d8494>] dump_stack+0x4f/0x6b [<ffffffff8105e554>] __warn+0xe4/0x100 [<ffffffff8105e5bf>] warn_slowpath_fmt+0x4f/0x60 [<ffffffff810b18f0>] ? __synchronize_hardirq+0x60/0x60 [<ffffffff810b17fd>] handle_irq_event_percpu+0x23d/0x240 [<ffffffff810b1862>] handle_irq_event+0x62/0x90 [<ffffffff810b4e1f>] handle_edge_irq+0x8f/0x190 [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30 [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150 [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70 [<ffffffff810b250b>] irq_thread+0x13b/0x1d0 [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0 [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0 [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0 [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff8107e624>] kthread+0xd4/0xf0 [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40 [<ffffffff8167f592>] ret_from_fork+0x22/0x40 [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190 The handle_irq_event_* functions (and I suppose generic_handle_irq()) is expected to be called with interrupts disabled and they rightfully complain here because we run in thread context with interrupts enabled. Fix this by adding IRQF_NO_THREAD flag when the master interrupt is requested. This prevents forced threading of the interrupt used by the GPIO host controllers. Reported-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 05:42:43 +0300