summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2025-06-04phy: core: don't require set_mode() callback for phy_get_mode() to workDmitry Baryshkov1-3/+4
[ Upstream commit d58c04e305afbaa9dda7969151f06c4efe2c98b0 ] As reported by Damon Ding, the phy_get_mode() call doesn't work as expected unless the PHY driver has a .set_mode() call. This prompts PHY drivers to have empty stubs for .set_mode() for the sake of being able to get the mode. Make .set_mode() callback truly optional and update PHY's mode even if it there is none. Cc: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/96f8310f-93f1-4bcb-8637-137e1159ff83@rock-chips.com Tested-by: Damon Ding <damon.ding@rock-chips.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250209-phy-fix-set-moe-v2-1-76e248503856@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: renesas: rcar-gen3-usb2: Set timing registers only onceClaudiu Beznea1-2/+5
commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream. phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04phy: Fix error handling in tegra_xusb_port_initMa Ke1-4/+4
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream. If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclkKaustabh Chakraborty1-6/+6
commit e2158c953c973adb49383ddea2504faf08d375b7 upstream. In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not inverted when applied to the register values. Fix it. Cc: stable@vger.kernel.org Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver") Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13phy: tegra: xusb: reset VBUS & ID OVERRIDEBH Hsieh1-0/+11
commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream. Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-01phy: core: Fix that API devm_of_phy_provider_unregister() fails to ↵Zijun Hu1-3/+3
unregister the phy provider [ Upstream commit c0b82ab95b4f1fbc3e3aeab9d829d012669524b6 ] For devm_of_phy_provider_unregister(), its comment says it needs to invoke of_phy_provider_unregister() to unregister the phy provider, but it will not actually invoke the function since devres_destroy() does not call devm_phy_provider_release(), and the missing of_phy_provider_unregister() call will cause: - The phy provider fails to be unregistered. - Leak both memory and the OF node refcount. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-01phy: core: fix code style in devm_of_phy_provider_unregisterVinod Koul1-1/+2
[ Upstream commit b555f35f2f87f8a99ba8e65d3f51ae4294748b58 ] Documentation/process/coding-style.rst says: "functions: they have the opening brace at the beginning of the next line" devm_of_phy_provider_unregister() function has opening brace at same line, so fix it up. Link: https://lore.kernel.org/r/20200629145010.122675-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: c0b82ab95b4f ("phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09phy: core: Fix that API devm_phy_destroy() fails to destroy the phyZijun Hu1-1/+1
commit 4dc48c88fcf82b89fdebd83a906aaa64f40fb8a9 upstream. For devm_phy_destroy(), its comment says it needs to invoke phy_destroy() to destroy the phy, but it will not actually invoke the function since devres_destroy() does not call devm_phy_consume(), and the missing phy_destroy() call will cause that the phy fails to be destroyed. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09phy: core: Fix that API devm_phy_put() fails to release the phyZijun Hu1-1/+1
commit fe4bfa9b6d7bd752bfe4700c937f235aa8ce997b upstream. For devm_phy_put(), its comment says it needs to invoke phy_put() to release the phy, but it will not actually invoke the function since devres_destroy() does not call devm_phy_release(), and the missing phy_put() call will cause: - The phy fails to be released. - devm_phy_put() can not fully undo what API devm_phy_get() does. - Leak refcount of both the module and device for below typical usage: devm_phy_get(); // or its variant ... err = do_something(); if (err) goto err_out; ... err_out: devm_phy_put(); // leak refcount here The file(s) affected by this issue are shown below since they have such typical usage. drivers/pci/controller/cadence/pcie-cadence.c drivers/net/ethernet/ti/am65-cpsw-nuss.c Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Cc: stable@vger.kernel.org Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09phy: core: Fix an OF node refcount leakage in of_phy_provider_lookup()Zijun Hu1-1/+3
commit a2d633cb1421e679b56f1a9fe1f42f089706f1ed upstream. For macro for_each_child_of_node(parent, child), refcount of @child has been increased before entering its loop body, so normally needs to call of_node_put(@child) before returning from the loop body to avoid refcount leakage. of_phy_provider_lookup() has such usage but does not call of_node_put() before returning, so cause leakage of the OF node refcount. Fix by simply calling of_node_put() before returning from the loop body. The APIs affected by this issue are shown below since they indirectly invoke problematic of_phy_provider_lookup(). phy_get() of_phy_get() devm_phy_get() devm_of_phy_get() devm_of_phy_get_by_index() Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09phy: core: Fix an OF node refcount leakage in _of_phy_get()Zijun Hu1-2/+5
commit 5ebdc6be16c2000e37fcb8b4072d442d268ad492 upstream. _of_phy_get() will directly return when suffers of_device_is_compatible() error, but it forgets to decrease refcount of OF node @args.np before error return, the refcount was increased by previous of_parse_phandle_with_args() so causes the OF node's refcount leakage. Fix by decreasing the refcount via of_node_put() before the error return. Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren1-2/+2
[ Upstream commit 7104ba0f1958adb250319e68a15eff89ec4fd36d ] If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23phy: renesas: rcar-gen3-usb2: Fix returning wrong error codeYoshihiro Shimoda1-4/+0
[ Upstream commit 249abaf3bf0dd07f5ddebbb2fe2e8f4d675f074e ] Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/ Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pinsTony Lindgren1-17/+12
[ Upstream commit 3b384cc74b00b5ac21d18e4c1efc3c1da5300971 ] Looks like the driver sleep pins configuration is unusable. Adding the sleep pins causes the usb phy to not respond. We need to use the default pins in probe, and only set sleep pins at phy_mdm6600_device_power_off(). As the modem can also be booted to a serial port mode for firmware flashing, let's make the pin changes limited to probe and remove. For probe, we get the default pins automatically. We only need to set the sleep pins in phy_mdm6600_device_power_off() to prevent the modem from waking up because the gpio line glitches. If it turns out that we need a separate state for phy_mdm6600_power_on() and phy_mdm6600_power_off(), we can use the pinctrl idle state. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25phy: mapphone-mdm6600: Fix runtime PM for removeTony Lindgren1-0/+1
[ Upstream commit b99e0ba9633af51638e5ee1668da2e33620c134f ] Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-25phy: mapphone-mdm6600: Fix runtime disable on probeTony Lindgren1-3/+5
[ Upstream commit 719606154c7033c068a5d4c1dc5f9163b814b3c8 ] Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") caused a regression where we now unconditionally disable runtime PM at the end of the probe while it is only needed on errors. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg writeJonas Karlman1-2/+4
[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ] inno_write is used to configure 0xaa reg, that also hold the POST_PLL_POWER_DOWN bit. When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not taken into consideration. Fix this by keeping the power down bit until configuration is complete. Also reorder the reg write order for consistency. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rateZheng Yang1-3/+5
[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ] inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found in the pre pll config table when the fractal divider is used. This can prevent proper power_on because a tmdsclock for the new rate is not found in the pre pll config table. Fix this by saving and returning a rounded pixel rate that exist in the pre pll config table. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Zheng Yang <zhengyang@rock-chips.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328Jonas Karlman1-2/+2
[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ] inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro when configuring vco_div_5 on RK3328. Fix this by using correct vco_div_5 macro for RK3328. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()Harshit Mogalapalli1-1/+1
[ Upstream commit 13c088cf3657d70893d75cf116be937f1509cc0f ] The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM. In the for loop, 'i' is used as the index for array 'priv->ports[]' with a check (i > INNO_PHY_PORT_NUM) which indicates that INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop. This > comparison needs to be changed to >=, otherwise it potentially leads to an out of bounds write on the next iteration through the loop Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-30phy: st: miphy28lp: use _poll_timeout functions for waitsAlain Volmat1-32/+10
[ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ] This commit introduces _poll_timeout functions usage instead of wait loops waiting for a status bit. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ↵Gaosheng Cui1-0/+2
ulpi_port [ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ] The tegra_xusb_port_unregister should be called when usb2_port and ulpi_port map fails in tegra_xusb_add_usb2_port() or in tegra_xusb_add_ulpi_port(), fix it. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11phy: rockchip-typec: Fix unsigned comparison with less than zeroJiapeng Chong1-2/+1
[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ] The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int. ./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in ↵Shang XiaoJing1-1/+3
rockchip_usb2phy_power_on() [ Upstream commit 5daba914da0e48950e9407ea4d75fa57029c9adc ] The clk_disable_unprepare() should be called in the error handling of rockchip_usb2phy_power_on(). Fixes: 0e08d2a727e6 ("phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221205115823.16957-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25phy: stm32: fix an error code in probeDan Carpenter1-0/+2
[ Upstream commit ca1c73628f5bd0c1ef6e46073cc3be2450605b06 ] If "index > usbphyc->nphys" is true then this returns success but it should return -EINVAL. Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/Y0kq8j6S+5nDdMpr@kili Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26phy: qualcomm: call clk_disable_unprepare in the error handlingDongliang Mu1-2/+4
[ Upstream commit c3966ced8eb8dc53b6c8d7f97d32cc8a2107d83e ] Smatch reports the following error: drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on lines: 58. drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on() warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines: 58. Fix this by calling proper clk_disable_unprepare calls. Fixes: 0b56e9a7e835 ("phy: Group vendor specific phy drivers") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14phy: qcom-qmp: fix pipe-clock imbalance on power-on failureJohan Hovold1-1/+1
[ Upstream commit 5e73b2d9867998278479ccc065a8a8227a5513ef ] Make sure to disable the pipe clock also if ufs-reset deassertion fails during power on. Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit(). Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller") Cc: Evan Green <evgreen@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14phy: qcom-qmp: fix reset-controller leak on probe errorsJohan Hovold1-0/+9
commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream. Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14phy: qcom-qmp: fix struct clk leak on probe errorsJohan Hovold1-1/+1
commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream. Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09phy: ti: Add missing pm_runtime_disable() in serdes_am654_probeMiaoqian Lin1-1/+1
[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ] The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probeMiaoqian Lin1-1/+2
[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ] The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocksMiaoqian Lin1-1/+1
[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ] The corresponding API for clk_prepare_enable is clk_disable_unprepare. Make sure that the clock is unprepared on exit by changing clk_disable to clk_disable_unprepare. Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: samsung: exynos5250-sata: fix missing device put in probe error pathsKrzysztof Kozlowski1-6/+14
[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ] The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probeMiaoqian Lin1-0/+1
[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})Liu Ying1-2/+2
[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ] According to the comment of the function phy_mipi_dphy_get_default_config(), it uses minimum D-PHY timings based on MIPI D-PHY specification. They are derived from the valid ranges specified in Section 6.9, Table 14, Page 41 of the D-PHY specification (v1.2). The table 14 explicitly mentions that the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and 'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that the minimum values are 50000 picoseconds and @lpx picoseconds respectively. Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx, which hints the same minimum values. Without this patch, the function phy_mipi_dphy_get_default_config() wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx. So, let's correct them to 50000 picoseconds and cfg->lpx respectively. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <mripard@kernel.org> Cc: Guido Günther <agx@sigxcpu.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27phy: uniphier-usb3ss: fix unintended writing zeros to PHY registerRyuta NAKANISHI1-4/+6
[ Upstream commit 898c7a9ec81620125f2463714a0f4dea18ad6e54 ] Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy parameters"), in function uniphier_u3ssphy_set_param(), unintentionally write zeros to other fields when writing PHY registers. Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC") Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17phy: qcom-qusb2: Fix a memory leak on probeVladimir Zapolskiy1-6/+10
[ Upstream commit bf7ffcd0069d30e2e7ba2b827f08c89f471cd1f3 ] On success nvmem_cell_read() returns a pointer to a dynamically allocated buffer, and therefore it shall be freed after usage. The issue is reported by kmemleak: # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff3b3803e4b280 (size 128): comm "kworker/u16:1", pid 107, jiffies 4294892861 (age 94.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007739afdc>] __kmalloc+0x27c/0x41c [<0000000071c0fbf8>] nvmem_cell_read+0x40/0xe0 [<00000000e803ef1f>] qusb2_phy_init+0x258/0x5bc [<00000000fc81fcfa>] phy_init+0x70/0x110 [<00000000e3d48a57>] dwc3_core_soft_reset+0x4c/0x234 [<0000000027d1dbd4>] dwc3_core_init+0x68/0x990 [<000000001965faf9>] dwc3_probe+0x4f4/0x730 [<000000002f7617ca>] platform_probe+0x74/0xf0 [<00000000a2576cac>] really_probe+0xc4/0x470 [<00000000bc77f2c5>] __driver_probe_device+0x11c/0x190 [<00000000130db71f>] driver_probe_device+0x48/0x110 [<0000000019f36c2b>] __device_attach_driver+0xa4/0x140 [<00000000e5812ff7>] bus_for_each_drv+0x84/0xe0 [<00000000f4bac574>] __device_attach+0xe4/0x1c0 [<00000000d3beb631>] device_initial_probe+0x20/0x30 [<000000008019b9db>] bus_probe_device+0xa4/0xb0 Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210922233548.2150244-1-vladimir.zapolskiy@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()Christophe JAILLET1-4/+13
[ Upstream commit f7eedcb8539ddcbb6fe7791f1b4ccf43f905c72f ] Add an error handling path in the probe to release some resources, as already done in the remove function. Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14phy: uniphier-pcie: Fix updating phy parametersKunihiko Hayashi1-4/+7
[ Upstream commit 4a90bbb478dbf18ecdec9dcf8eb708e319d24264 ] The current driver uses a value from register TEST_O as the original value for register TEST_I, though, the value is overwritten by "param", so there is a bug that the original value isn't no longer used. The value of TEST_O[7:0] should be masked with "mask", replaced with "param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value. Fixes: c6d9b1324159 ("phy: socionext: add PCIe PHY driver support") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionallyGeert Uytterhoeven1-2/+2
[ Upstream commit 6cb17707aad869de163d7bf42c253caf501be4e2 ] Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of ARMADA375_USBCLUSTER_PHY to MACH_ARMADA_375, and ask the user in case of compile-testing. Fixes: eee47538ec1f2619 ("phy: add support for USB cluster on the Armada 375 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210208150252.424706-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()Yang Yingliang1-1/+1
[ Upstream commit e1723d8b87b73ab363256e7ca3af3ddb75855680 ] This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04phy: rockchip-emmc: emmc_phy_init() always return 0Chris Ruehl1-3/+5
[ Upstream commit 39961bd6b70e5a5d7c4b5483ad8e1db6b5765c60 ] rockchip_emmc_phy_init() return variable is not set with the error value if clk_get() failed. 'emmcclk' is optional, thus use clk_get_optional() and if the return value != NULL make error processing and set the return code accordingly. Fixes: 52c0624a10cce phy: rockchip-emmc: Set phyctrl_frqsel based on card clock Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210080454.17379-1-chris.ruehl@gtsys.com.hk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-07phy: cpcap-usb: Fix warning for missing regulator_disableTony Lindgren1-6/+13
[ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ] On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failureWang Li1-2/+4
[ Upstream commit 51e339deab1e51443f6ac3b1bd5cd6cc8e8fe1d9 ] pm_runtime_enable() will decrease power disable depth. Thus a pairing increment is needed on the error handling path to keep it balanced. Fixes: 5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02phy: tegra: xusb: Fix dangling pointer on probe failureMarc Zyngier1-0/+1
[ Upstream commit eb9c4dd9bdfdebaa13846c16a8c79b5b336066b6 ] If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure. This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there: 8.752082] [004d554e5145533c] address between user and kernel address ranges [ 8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+) [ 8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S W E 5.9.0-rc7-00298-gf6337624c4fe #1980 [ 8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT) [ 8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 8.752115] pc : kobject_put+0x1c/0x21c [ 8.752120] lr : put_device+0x20/0x30 [ 8.752121] sp : ffffffc012eb3840 [ 8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638 [ 8.752125] x27: ffffffc008d56440 x26: 0000000000000000 [ 8.752128] x25: ffffff81eb508200 x24: 0000000000000000 [ 8.752130] x23: ffffff81eb538800 x22: 0000000000000000 [ 8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810 [ 8.752134] x19: 3d4d554e51455300 x18: 0000000000000020 [ 8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94 [ 8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90 [ 8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8 [ 8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea [ 8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8 [ 8.752146] x7 : 0000000000000001 x6 : 0000000000000001 [ 8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000 [ 8.752150] x3 : 0000000000000001 x2 : 0000000000000001 [ 8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300 [ 8.752155] Call trace: [ 8.752157] kobject_put+0x1c/0x21c [ 8.752160] put_device+0x20/0x30 [ 8.752164] tegra_xusb_padctl_put+0x24/0x3c [ 8.752170] tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra] [ 8.752174] platform_drv_probe+0x60/0xb4 [ 8.752176] really_probe+0xf0/0x504 [ 8.752179] driver_probe_device+0x100/0x170 [ 8.752181] device_driver_attach+0xcc/0xd4 [ 8.752183] __driver_attach+0xb0/0x17c [ 8.752185] bus_for_each_dev+0x7c/0xd4 [ 8.752187] driver_attach+0x30/0x3c [ 8.752189] bus_add_driver+0x154/0x250 [ 8.752191] driver_register+0x84/0x140 [ 8.752193] __platform_driver_register+0x54/0x60 [ 8.752197] tegra_xusb_init+0x40/0x1000 [xhci_tegra] [ 8.752201] do_one_initcall+0x54/0x2d0 [ 8.752205] do_init_module+0x68/0x29c [ 8.752207] load_module+0x2178/0x26c0 [ 8.752209] __do_sys_finit_module+0xb0/0x120 [ 8.752211] __arm64_sys_finit_module+0x2c/0x40 [ 8.752215] el0_svc_common.constprop.0+0x80/0x240 [ 8.752218] do_el0_svc+0x30/0xa0 [ 8.752220] el0_svc+0x18/0x50 [ 8.752223] el0_sync_handler+0x90/0x318 [ 8.752225] el0_sync+0x158/0x180 [ 8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000) [ 8.752232] ---[ end trace 90f6c89d62d85ff5 ]--- Reset the pointer on probe failure fixes the issue. Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-01phy: marvell: comphy: Convert internal SMCC firmware return codes to errnoPali Rohár2-6/+22
commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream. Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07phy: ti: am654: Fix a leak in serdes_am654_probe()Dan Carpenter1-2/+4
[ Upstream commit 850280156f6421a404f2351bee07a0e7bedfd4c6 ] If devm_phy_create() fails then we need to call of_clk_del_provider(node) to undo the call to of_clk_add_provider(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124648.GA183976@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01phy: samsung: s5pv210-usb2: Add delay after resetJonathan Bakker1-0/+4
[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ] The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver. This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-17phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY initSivaprakash Murugesan2-7/+11
commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream. There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19phy: armada-38x: fix NETA lockup when repeatedly switching speedsRussell King1-7/+38
[ Upstream commit 1dea06cd643da38931382ebdc151efced201ffad ] The mvneta hardware appears to lock up in various random ways when repeatedly switching speeds between 1G and 2.5G, which involves reprogramming the COMPHY. It is not entirely clear why this happens, but best guess is that reprogramming the COMPHY glitches mvneta clocks causing the hardware to fail. It seems that rebooting resolves the failure, but not down/up cycling the interface alone. Various other approaches have been tried, such as trying to cleanly power down the COMPHY and then take it back through the power up initialisation, but this does not seem to help. It was finally noticed that u-boot's last step when configuring a COMPHY for "SGMII" mode was to poke at a register described as "GBE_CONFIGURATION_REG", which is undocumented in any external documentation. All that we have is the fact that u-boot sets a bit corresponding to the "SGMII" lane at the end of COMPHY initialisation. Experimentation shows that if we clear this bit prior to changing the speed, and then set it afterwards, mvneta does not suffer this problem on the SolidRun Clearfog when switching speeds between 1G and 2.5G. This problem was found while script-testing phylink. This fix also requires the corresponding change to DT to be effective. See "ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds". Fixes: 14dc100b4411 ("phy: armada38x: add common phy support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1jxtRj-0003Tz-CG@rmk-PC.armlinux.org.uk Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 18:59:51 +0300