summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
9 daysphy: broadcom: bcm63xx-usbh: fix section mismatchesJohan Hovold1-3/+3
commit 356d1924b9a6bc2164ce2bf1fad147b0c37ae085 upstream. Platform drivers can be probed after their init sections have been discarded (e.g. on probe deferral or manual rebind through sysfs) so the probe function and match table must not live in init. Fixes: 783f6d3dcf35 ("phy: bcm63xx-usbh: Add BCM63xx USBH driver") Cc: stable@vger.kernel.org # 5.9 Cc: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9 daysphy: renesas: rcar-gen3-usb2: Fix an error handling path in ↵Christophe JAILLET1-6/+14
rcar_gen3_phy_usb2_probe() [ Upstream commit 662bb179d3381c7c069e44bb177396bcaee31cc8 ] If an error occurs after the reset_control_deassert(), reset_control_assert() must be called, as already done in the remove function. Use devm_add_action_or_reset() to add the missing call and simplify the .remove() function accordingly. While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore. [claudiu.beznea: removed "struct reset_control *rstc = data;" from rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc] Fixes: 4eae16375357 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0Michael Riesch1-2/+3
[ Upstream commit 8c7c19466c854fa86b82d2148eaa9bf0e6531423 ] The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF this offset is perfectly fine (in fact, register 0 is the only one in this register file). Introduce a boolean variable to indicate valid registers and allow writes to register 0. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Michael Riesch <michael.riesch@collabora.com> Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheetMichael Dege1-0/+28
[ Upstream commit e4a8db93b5ec9bca1cc66b295544899e3afd5e86 ] R-Car S4-8 datasheet Rev.1.20 describes some additional register settings at the end of the initialization. Signed-off-by: Michael Dege <michael.dege@renesas.com> Link: https://lore.kernel.org/r/20250703-renesas-serdes-update-v4-2-1db5629cac2b@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-11-24phy: cadence: cdns-dphy: Enable lower resolutions in dphyHarikrishna Shenoy1-1/+3
[ Upstream commit 43bd2c44515f8ee5c019ce6e6583f5640387a41b ] Enable support for data lane rates between 80-160 Mbps cdns dphy as mentioned in TRM [0] by setting the pll_opdiv field to 16. This change enables lower resolutions like 640x480 at 60Hz. [0]: https://www.ti.com/lit/zip/spruil1 (Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions) Reviewed-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com> Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-23phy: cadence: cdns-dphy: Update calibration wait time for startup state machineDevarsh Thakkar1-1/+3
[ Upstream commit 2c27aaee934a1b5229152fe33a14f1fdf50da143 ] Do read-modify-write so that we re-use the characterized reset value as specified in TRM [1] to program calibration wait time which defines number of cycles to wait for after startup state machine is in bandgap enable state. This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's AM62L and J721E SoC since earlier calibration wait time was getting overwritten to zero value thus failing the PLL to lockup and causing timeout. [1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2): Link: https://www.ti.com/lit/pdf/spruj83 Cc: stable@vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-23phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY pollingDevarsh Thakkar1-32/+92
[ Upstream commit 284fb19a3ffb1083c3ad9c00d29749d09dddb99c ] PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable@vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-23phy: cdns-dphy: Store hs_clk_rate and return itTomi Valkeinen1-0/+5
[ Upstream commit 689a54acb56858c85de8c7285db82b8ae6dbf683 ] The DPHY driver does not return the actual hs_clk_rate, so the DSI driver has no idea what clock was actually achieved. Set the realized hs_clk_rate to the opts struct, so that the DSI driver gets it back. Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Tested-by: Parth Pancholi <parth.pancholi@toradex.com> Tested-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250723-cdns-dphy-hs-clk-rate-fix-v1-1-d4539d44cbe7@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 284fb19a3ffb ("phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-15phy: rockchip: naneng-combphy: Enable U3 OTG port for RK3568Jonas Karlman1-0/+12
[ Upstream commit 7bb14b61b7d03db770b7e8871493f5b9b2be2b79 ] The boot firmware may disable the U3 port early during boot and leave it up to the controller or PHY driver to re-enable U3 when needed. The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588, something the Rockchip Naneng Combo PHY driver never does for RK3568. This may result in USB 3.0 ports being limited to only using USB 2.0 or in special cases not working at all on RK3568. Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled when a PHY with PHY_TYPE_USB3 mode is used. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-25phy: ti: omap-usb2: fix device leak at unbindJohan Hovold1-0/+13
[ Upstream commit 64961557efa1b98f375c0579779e7eeda1a02c42 ] Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 478b6c7436c2 ("usb: phy: omap-usb2: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-3-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-25phy: Use device_get_match_data()Rob Herring8-55/+26
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ] Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19phy: ti-pipe3: fix device leak at unbindJohan Hovold1-0/+13
commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream. Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19phy: tegra: xusb: fix device and OF node leak at probeJohan Hovold1-1/+5
commit bca065733afd1e3a89a02f05ffe14e966cd5f78e upstream. Make sure to drop the references taken to the PMC OF node and device by of_parse_phandle() and of_find_device_by_node() during probe. Note the holding a reference to the PMC device does not prevent the PMC regmap from going away (e.g. if the PMC driver is unbound) so there is no need to keep the reference. Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210") Cc: stable@vger.kernel.org # 5.14 Cc: JC Kuo <jckuo@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequenceKathiravan Thirumoorthy1-4/+10
commit 4a3556b81b99f0c8c0358f7cc6801a62b4538fe2 upstream. The current configuration used for the IPQ5332 M31 USB PHY fails the Near End High Speed Signal Quality compliance test. To resolve this, update the initialization sequence as specified in the Hardware Design Document. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Cc: stable@kernel.org Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebdb@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28phy: rockchip-pcie: Properly disable TEST_WRITE strobe signalGeraldo Nascimento1-2/+1
[ Upstream commit 25facbabc3fc33c794ad09d73f73268c0f8cbc7d ] pcie_conf is used to touch TEST_WRITE strobe signal. This signal should be enabled, a little time waited, and then disabled. Current code clearly was copy-pasted and never disables the strobe signal. Adjust the define. While at it, remove PHY_CFG_RD_MASK which has been unused since 64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function"). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com> Link: https://lore.kernel.org/r/d514d5d5627680caafa8b7548cbdfee4307f5440.1751322015.git.geraldogabriel@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24phy: tegra: xusb: Disable periodic tracking on Tegra234Haotien Hsu1-1/+1
commit 7be54870e9bf5ed0b4fe2a23b41a630527882de5 upstream. Periodic calibration updates (~10µs) may overlap with transfers when PCIe NVMe SSD, LPDDR, and USB2 devices operate simultaneously, causing crosstalk on Tegra234 devices. Hence disable periodic calibration updates and make this a one-time calibration. Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support") Cc: stable@vger.kernel.org Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250519090929.3132456-3-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24phy: tegra: xusb: Decouple CYA_TRK_CODE_UPDATE_ON_IDLE from trk_hw_modeWayne Chang2-6/+9
commit 24c63c590adca310e0df95c77cf7aa5552bc3fc5 upstream. The logic that drives the pad calibration values resides in the controller reset domain and so the calibration values are only being captured when the controller is out of reset. However, by clearing the CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set while the controller is in reset. The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the trk_hw_mode flag, but this dependency is not necessary. Instead, introduce a new flag, trk_update_on_idle, to independently control this bit. Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250519090929.3132456-2-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY modeWayne Chang1-22/+37
commit cefc1caee9dd06c69e2d807edc5949b329f52b22 upstream. When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code assumed that the regulator should be disabled. However, if the regulator is marked as always-on, regulator_is_enabled() continues to return true, leading to an incorrect attempt to disable a regulator which is not enabled. This can result in warnings such as: [ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004 _regulator_disable+0xe4/0x1a0 [ 250.155652] unbalanced disables for VIN_SYS_5V0 To fix this, we move the regulator control logic into tegra186_xusb_padctl_id_override() function since it's directly related to the ID override state. The regulator is now only disabled when the role transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID register. This ensures that regulator enable/disable operations are properly balanced and only occur when actually transitioning to/from host mode. Fixes: 49d46e3c7e59 ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27phy: fsl-imx8mq-usb: fix phy_tx_vboost_level_from_property()Xu Yang1-5/+5
commit b15ee09ddb987a122e74fb0fdf1bd6e864959fd3 upstream. The description of TX_VBOOST_LVL is wrong in register PHY_CTRL3 bit[31:29]. The updated description as below: 011: Corresponds to a launch amplitude of 0.844 V. 100: Corresponds to a launch amplitude of 1.008 V. 101: Corresponds to a launch amplitude of 1.156 V. This will fix the parsing function phy_tx_vboost_level_from_property() to return correct value. Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning") Cc: stable@vger.kernel.org Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250430094502.2723983-3-xu.yang_2@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bugChenyuan Yang1-1/+5
[ Upstream commit d14402a38c2d868cacb1facaf9be908ca6558e59 ] The qmp_usb_iomap() helper function currently returns the raw result of devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return a NULL pointer and the caller only checks error pointers with IS_ERR(), NULL could bypass the check and lead to an invalid dereference. Fix the issue by checking if devm_ioremap() returns NULL. When it does, qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM), ensuring safe and consistent error handling. Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: a5d6b1ac56cb ("phy: qcom-qmp-usb: fix memleak on probe deferral") CC: Johan Hovold <johan@kernel.org> CC: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250414125050.2118619-1-chenyuan0y@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failureHal Feng1-0/+7
[ Upstream commit 3f097adb9b6c804636bcf8d01e0e7bc037bee0d3 ] JH7110 USB 2.0 host fails to detect USB 2.0 devices occasionally. With a long time of debugging and testing, we found that setting Rx clock gating control signal to normal power consumption mode can solve this problem. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20250422101244.51686-1-hal.feng@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: core: don't require set_mode() callback for phy_get_mode() to workDmitry Baryshkov1-3/+4
[ Upstream commit d58c04e305afbaa9dda7969151f06c4efe2c98b0 ] As reported by Damon Ding, the phy_get_mode() call doesn't work as expected unless the PHY driver has a .set_mode() call. This prompts PHY drivers to have empty stubs for .set_mode() for the sake of being able to get the mode. Make .set_mode() callback truly optional and update PHY's mode even if it there is none. Cc: Damon Ding <damon.ding@rock-chips.com> Link: https://lore.kernel.org/r/96f8310f-93f1-4bcb-8637-137e1159ff83@rock-chips.com Tested-by: Damon Ding <damon.ding@rock-chips.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20250209-phy-fix-set-moe-v2-1-76e248503856@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power offClaudiu Beznea1-1/+9
[ Upstream commit 9ce71e85b29eb63e48e294479742e670513f03a0 ] Assert PLL reset on PHY power off. This saves power. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver dataClaudiu Beznea1-23/+26
[ Upstream commit 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932 ] The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are requested and configured by PHY users. The struct phy_ops APIs access the same set of registers to configure all PHYs. Additionally, PHY settings can be modified through sysfs or an IRQ handler. While some struct phy_ops APIs are protected by a driver-wide mutex, others rely on individual PHY-specific mutexes. This approach can lead to various issues, including: 1/ the IRQ handler may interrupt PHY settings in progress, racing with hardware configuration protected by a mutex lock 2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread suspends to wait for the delay, another thread may try to configure another PHY (with phy_init() + phy_power_on()); re-running the phy_init() goes to the exact same configuration code, re-running the same hardware configuration on the same set of registers (and bits) which might impact the result of the msleep for the 1st configuring thread 3/ sysfs can configure the hardware (though role_store()) and it can still race with the phy_init()/phy_power_on() APIs calling into the drivers struct phy_ops To address these issues, add a spinlock to protect hardware register access and driver private data structures (e.g., calls to rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains necessary as all PHY instances share common settings. With this change, the existing mutex protection is removed and the cleanup.h helpers are used. While at it, to keep the code simpler, do not skip regulator_enable()/regulator_disable() APIs in rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the regulators enable/disable operations are reference counted anyway. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: renesas: rcar-gen3-usb2: Move IRQ request in probeClaudiu Beznea1-20/+26
[ Upstream commit de76809f60cc938d3580bbbd5b04b7d12af6ce3a ] Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration to init") moved the IRQ request operation from probe to struct phy_ops::phy_init API to avoid triggering interrupts (which lead to register accesses) while the PHY clocks (enabled through runtime PM APIs) are not active. If this happens, it results in a synchronous abort. One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which calls free_irq() on driver removal. Move the IRQ request and free operations back to probe, and take the runtime PM state into account in IRQ handler. This commit is preparatory for the subsequent fixes in this series. Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04phy: renesas: rcar-gen3-usb2: Add support to initialize the busClaudiu Beznea1-3/+47
[ Upstream commit 4eae16375357a2a7e8501be5469532f7636064b3 ] The Renesas RZ/G3S need to initialize the USB BUS before transferring data due to hardware limitation. As the register that need to be touched for this is in the address space of the USB PHY, and the UBS PHY need to be initialized before any other USB drivers handling data transfer, add support to initialize the USB BUS. As the USB PHY is probed before any other USB drivers that enables clocks and de-assert the reset signals and the BUS initialization is done in the probe phase, we need to add code to de-assert reset signal and runtime resume the device (which enables its clocks) before accessing the registers. As the reset signals are not required by the USB PHY driver for the other USB PHY hardware variants, the reset signals and runtime PM was handled only in the function that initialize the USB BUS. The PHY initialization was done right after runtime PM enable to have all in place when the PHYs are registered. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240822152801.602318-11-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 9ce71e85b29e ("phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22phy: tegra: xusb: remove a stray unlockDan Carpenter1-2/+0
commit 83c178470e0bf690d34c8c08440f2421b82e881c upstream. We used to take a lock in tegra186_utmi_bias_pad_power_on() but now we have moved the lock into the caller. Unfortunately, when we moved the lock this unlock was left behind and it results in a double unlock. Delete it now. Fixes: b47158fb4295 ("phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/aAjmR6To4EnvRl4G@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-22phy: renesas: rcar-gen3-usb2: Set timing registers only onceClaudiu Beznea1-2/+5
commit 86e70849f4b2b4597ac9f7c7931f2a363774be25 upstream. phy-rcar-gen3-usb2 driver exports 4 PHYs. The timing registers are common to all PHYs. There is no need to set them every time a PHY is initialized. Set timing register only when the 1st PHY is initialized. Fixes: f3b5a8d9b50d ("phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-22phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bindClaudiu Beznea1-19/+14
commit 54c4c58713aaff76c2422ff5750e557ab3b100d7 upstream. It has been observed on the Renesas RZ/G3S SoC that unbinding and binding the PHY driver leads to role autodetection failures. This issue occurs when PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt associated with the USB2_INT_ENABLE register (as rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called to initialize OTG without enabling PHY interrupts. To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in role_store(), role_show(), and rcar_gen3_init_otg(). At the same time, rcar_gen3_init_otg() is only called when initialization for a PHY with interrupt bits is in progress. As a result, the struct rcar_gen3_phy::otg_initialized is no longer needed. Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Cc: stable@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-22phy: Fix error handling in tegra_xusb_port_initMa Ke1-4/+4
commit b2ea5f49580c0762d17d80d8083cb89bc3acf74f upstream. If device_add() fails, do not use device_unregister() for error handling. device_unregister() consists two functions: device_del() and put_device(). device_unregister() should only be called after device_add() succeeded because device_del() undoes what device_add() does if successful. Change device_unregister() to put_device() call before returning from the function. As comment of device_add() says, 'if device_add() succeeds, you should call device_del() when you want to get rid of it. If device_add() has not succeeded, use only put_device() to drop the reference count'. Found by code review. Cc: stable@vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250303072739.3874987-1-make24@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-22phy: tegra: xusb: Use a bitmask for UTMI pad power state trackingWayne Chang1-17/+27
commit b47158fb42959c417ff2662075c0d46fb783d5d1 upstream. The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. Cc: stable@vger.kernel.org Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Wayne Chang <waynec@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25phy: freescale: imx8m-pcie: assert phy reset and perst in power offStefan Eichenberger1-0/+11
commit aecb63e88c5e5fb9afb782a1577264c76f179af9 upstream. Ensure the PHY reset and perst is asserted during power-off to guarantee it is in a reset state upon repeated power-on calls. This resolves an issue where the PHY may not properly initialize during subsequent power-on cycles. Power-on will deassert the reset at the appropriate time after tuning the PHY parameters. During suspend/resume cycles, we observed that the PHY PLL failed to lock during resume when the CPU temperature increased from 65C to 75C. The observed errors were: phy phy-32f00000.pcie-phy.3: phy poweron failed --> -110 imx6q-pcie 33800000.pcie: waiting for PHY ready timeout! imx6q-pcie 33800000.pcie: PM: dpm_run_callback(): genpd_resume_noirq+0x0/0x80 returns -110 imx6q-pcie 33800000.pcie: PM: failed to resume noirq: error -110 This resulted in a complete CPU freeze, which is resolved by ensuring the PHY is in reset during power-on, thus preventing PHY PLL failures. Cc: stable@vger.kernel.org Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250305144355.20364-3-eichest@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclkKaustabh Chakraborty1-6/+6
commit e2158c953c973adb49383ddea2504faf08d375b7 upstream. In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not inverted when applied to the register values. Fix it. Cc: stable@vger.kernel.org Fixes: 59025887fb08 ("phy: Add new Exynos5 USB 3.0 PHY driver") Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07phy: tegra: xusb: reset VBUS & ID OVERRIDEBH Hsieh1-0/+11
commit 55f1a5f7c97c3c92ba469e16991a09274410ceb7 upstream. Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed with unexpected value prior to XUSB PADCTL driver, this could also occur in virtualization scenario. For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set a type-c port to host mode and keeps the value to kernel. If the type-c port is connected a usb host, below errors can be observed right after usb host mode driver gets probed. The errors would keep until usb role class driver detects the type-c port as device mode and notifies usb device mode driver to set both ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL driver. [ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 173.765837] usb usb3-port2: config error Taking virtualization into account, asserting XUSB PADCTL reset would break XUSB functions used by other guest OS, hence only reset VBUS & ID OVERRIDE of the port in utmi_phy_init. Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support") Cc: stable@vger.kernel.org Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591 Signed-off-by: BH Hsieh <bhsieh@nvidia.com> Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07phy: rockchip: naneng-combphy: compatible reset with old DTChukun Pan1-1/+4
[ Upstream commit 3126ea9be66b53e607f87f067641ba724be24181 ] The device tree of RK3568 did not specify reset-names before. So add fallback to old behaviour to be compatible with old DT. Fixes: fbcbffbac994 ("phy: rockchip: naneng-combphy: fix phy reset") Cc: Jianfeng Liu <liujianfeng1994@gmail.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250106100001.1344418-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-02phy: rockchip: naneng-combphy: fix phy resetChukun Pan1-1/+1
commit fbcbffbac994aca1264e3c14da96ac9bfd90466e upstream. Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken. usb usb8-port1: Cannot enable. Maybe the USB cable is bad? This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but only "phy resets" need assert and deassert, "apb resets" don't need. So change the driver to only match the phy resets, which is also what the vendor kernel does. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Cc: FUKAUMI Naoki <naoki@radxa.com> Cc: Michael Zimmermann <sigmaepsilon92@gmail.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: usb: Toggle the PHY power during initJustin Chen1-0/+6
commit 0a92ea87bdd6f77ca4e17fe19649882cf5209edd upstream. When bringing up the PHY, it might be in a bad state if left powered. One case is we lose the PLL lock if the PLL is gated while the PHY is powered. Toggle the PHY power so we can start from a known state. Fixes: 4e5b9c9a73b3 ("phy: usb: Add support for new Synopsys USB controller on the 7216") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241024213540.1059412-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: core: Fix that API devm_phy_destroy() fails to destroy the phyZijun Hu1-1/+1
commit 4dc48c88fcf82b89fdebd83a906aaa64f40fb8a9 upstream. For devm_phy_destroy(), its comment says it needs to invoke phy_destroy() to destroy the phy, but it will not actually invoke the function since devres_destroy() does not call devm_phy_consume(), and the missing phy_destroy() call will cause that the phy fails to be destroyed. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: core: Fix that API devm_of_phy_provider_unregister() fails to ↵Zijun Hu1-3/+3
unregister the phy provider commit c0b82ab95b4f1fbc3e3aeab9d829d012669524b6 upstream. For devm_of_phy_provider_unregister(), its comment says it needs to invoke of_phy_provider_unregister() to unregister the phy provider, but it will not actually invoke the function since devres_destroy() does not call devm_phy_provider_release(), and the missing of_phy_provider_unregister() call will cause: - The phy provider fails to be unregistered. - Leak both memory and the OF node refcount. Fortunately, the faulty API has not been used by current kernel tree. Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: core: Fix that API devm_phy_put() fails to release the phyZijun Hu1-1/+1
commit fe4bfa9b6d7bd752bfe4700c937f235aa8ce997b upstream. For devm_phy_put(), its comment says it needs to invoke phy_put() to release the phy, but it will not actually invoke the function since devres_destroy() does not call devm_phy_release(), and the missing phy_put() call will cause: - The phy fails to be released. - devm_phy_put() can not fully undo what API devm_phy_get() does. - Leak refcount of both the module and device for below typical usage: devm_phy_get(); // or its variant ... err = do_something(); if (err) goto err_out; ... err_out: devm_phy_put(); // leak refcount here The file(s) affected by this issue are shown below since they have such typical usage. drivers/pci/controller/cadence/pcie-cadence.c drivers/net/ethernet/ti/am65-cpsw-nuss.c Fix by using devres_release() instead of devres_destroy() within the API. Fixes: ff764963479a ("drivers: phy: add generic PHY framework") Cc: stable@vger.kernel.org Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: core: Fix an OF node refcount leakage in of_phy_provider_lookup()Zijun Hu1-1/+3
commit a2d633cb1421e679b56f1a9fe1f42f089706f1ed upstream. For macro for_each_child_of_node(parent, child), refcount of @child has been increased before entering its loop body, so normally needs to call of_node_put(@child) before returning from the loop body to avoid refcount leakage. of_phy_provider_lookup() has such usage but does not call of_node_put() before returning, so cause leakage of the OF node refcount. Fix by simply calling of_node_put() before returning from the loop body. The APIs affected by this issue are shown below since they indirectly invoke problematic of_phy_provider_lookup(). phy_get() of_phy_get() devm_phy_get() devm_of_phy_get() devm_of_phy_get_by_index() Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: core: Fix an OF node refcount leakage in _of_phy_get()Zijun Hu1-2/+5
commit 5ebdc6be16c2000e37fcb8b4072d442d268ad492 upstream. _of_phy_get() will directly return when suffers of_device_is_compatible() error, but it forgets to decrease refcount of OF node @args.np before error return, the refcount was increased by previous of_parse_phandle_with_args() so causes the OF node's refcount leakage. Fix by decreasing the refcount via of_node_put() before the error return. Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices") Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02phy: qcom-qmp: Fix register name in RX Lane config of SC8280XPKrishna Kurapati1-1/+1
commit 8886fb3240931a0afce82dea87edfe46bcb0a586 upstream. In RX Lane configuration sequence of SC8280XP, the register V5_RX_UCDR_FO_GAIN is incorrectly spelled as RX_UCDR_SO_GAIN and hence the programming sequence is wrong. Fix the register sequence accordingly to avoid any compliance failures. This has been tested on SA8775P by checking device mode enumeration in SuperSpeed. Cc: stable@vger.kernel.org Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241112092831.4110942-1-quic_kriskura@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock checkRichard Zhu1-5/+5
[ Upstream commit f89263b69731e0144d275fff777ee0dd92069200 ] When enable initcall_debug together with higher debug level below. CONFIG_CONSOLE_LOGLEVEL_DEFAULT=9 CONFIG_CONSOLE_LOGLEVEL_QUIET=9 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7 The initialization of i.MX8MP PCIe PHY might be timeout failed randomly. To fix this issue, adjust the sequence of the resets refer to the power up sequence listed below. i.MX8MP PCIe PHY power up sequence: /--------------------------------------------- 1.8v supply ---------/ /--------------------------------------------------- 0.8v supply ---/ ---\ /-------------------------------------------------- X REFCLK Valid Reference Clock ---/ \-------------------------------------------------- ------------------------------------------- | i_init_restn -------------- ------------------------------------ | i_cmn_rstn --------------------- ------------------------------- | o_pll_lock_done -------------------------- Logs: imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000 imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000 probe of clk_imx8mp_audiomix.reset.0 returned 0 after 1052 usecs probe of 30e20000.clock-controller returned 0 after 32971 usecs phy phy-32f00000.pcie-phy.4: phy poweron failed --> -110 probe of 30e10000.dma-controller returned 0 after 10235 usecs imx6q-pcie 33800000.pcie: waiting for PHY ready timeout! dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2) imx6q-pcie 33800000.pcie: probe with driver imx6q-pcie failed with error -110 Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support") Cc: stable@vger.kernel.org Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> v2 changes: - Rebase to latest fixes branch of linux-phy git repo. - Richard's environment have problem and can't sent out patch. So I help post this fix patch. Link: https://lore.kernel.org/r/20241021155241.943665-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspendJohan Hovold1-0/+1
commit 29240130ab77c80bea1464317ae2a5fd29c16a0c upstream. Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. Fixes: e464a3180a43 ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support") Cc: stable@vger.kernel.org # 6.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240911115253.10920-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-08phy: qcom: qmp-usb: fix NULL-deref on runtime suspendJohan Hovold1-0/+1
commit bd9e4d4a3b127686efc60096271b0a44c3100061 upstream. Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. Fixes: 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240911115253.10920-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loopAbel Vesa1-104/+62
[ Upstream commit 734550d60cdf634299f0eac7f7fe15763ed990bb ] Instead of incrementing the base of the global reg fields, which renders the second instance of the repeater broken due to wrong offsets, use regmap with base and offset. As for zeroing out the rest of the tuning regs, avoid looping though the table and just use the table as is, as it is already zero initialized. Fixes: 99a517a582fc ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs") Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240201-phy-qcom-eusb2-repeater-fixes-v4-1-cf18c8cef6d7@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overridesKonrad Dybcio1-1/+16
[ Upstream commit 56156a76e765d32009fee058697c591194d0829f ] There are devices in the wild, like the Sony Xperia 1 V that *require* different tuning than the base design for USB to work. Add support for overriding the necessary tuning values. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230830-topic-eusb2_override-v2-4-7d8c893d93f6@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 734550d60cdf ("phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12phy: zynqmp: Take the phy mutex in xlateSean Anderson1-0/+1
[ Upstream commit d79c6840917097285e03a49f709321f5fb972750 ] Take the phy mutex in xlate to protect against concurrent modification/access to gtr_phy. This does not typically cause any issues, since in most systems the phys are only xlated once and thereafter accessed with the phy API (which takes the locks). However, we are about to allow userspace to access phys for debugging, so it's important to avoid any data races. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://lore.kernel.org/r/20240628205540.3098010-5-sean.anderson@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resumePiyush Mehta1-0/+56
[ Upstream commit 5af9b304bc6010723c02f74de0bfd24ff19b1a10 ] On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not happening after the resume. This is because serdes registers are reset when FPD is off (in suspend state) and needs to be reprogrammed in the resume path with the same default initialization as done in the first stage bootloader psu_init routine. To address the failure introduce a set of serdes registers to be saved in the suspend path and then restore it on resume. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-20 07:35:42 +0300