summaryrefslogtreecommitdiff
path: root/drivers/phy/tegra
AgeCommit message (Collapse)AuthorFilesLines
2019-08-13phy: tegra: Add PCIe PIPE2UPHY supportVidya Sagar3-0/+128
Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module. For each PCIe lane of a controller, there is a P2U unit instantiated at hardware level. This driver provides support for the programming required for each P2U that is going to be used for a PCIe controller. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-07-01Merge tag 'phy-for-5.2-rc_v2' of ↵Greg Kroah-Hartman2-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.2-rc *) Move Tegra124 PLL power supplies to be enabled by xusb-tegra124 *) Move Tegra210 PLL power supplies to be enabled by xusb-tegra210 *) Minor fixes: fix memory leaks at error path and addresses coverity. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.2-rc_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: tegra: xusb: Add Tegra210 PLL power supplies phy: tegra: xusb: Add Tegra124 PLL power supplies dt-bindings: phy: tegra-xusb: List PLL power supplies phy: usb: phy-brcm-usb: Remove sysfs attributes upon driver removal phy: renesas: rcar-gen2: Fix memory leak at error paths phy: qcom-qusb2: fix missing assignment of ret when calling clk_prepare_enable
2019-06-12phy: tegra: xusb: Add Tegra210 PLL power suppliesThierry Reding1-0/+9
The Tegra210 SoC has four inputs that consume power in order to supply the PLLs that drive the various USB, PCI and SATA pads. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-12phy: tegra: xusb: Add Tegra124 PLL power suppliesThierry Reding1-0/+9
The Tegra124 SoC has four inputs that consume power in order to supply the PLLs that drive the various USB, PCI and SATA pads. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner4-36/+4
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17phy: tegra: xusb: Add Tegra186 supportJC Kuo4-0/+933
Add support for the XUSB pad controller found on Tegra186 SoCs. It is mostly similar to the same IP found on earlier chips, but the number of pads exposed differs, as do the programming sequences. Note that the DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL power supplies of the XUSB pad controller require strict power sequencing and are therefore controlled by the PMIC on Tegra186. Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> [dan.carpenter@oracle.com: Fix testing the wrong variable in probe()] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [yuehaibing@huawei.com: Make two functions static to fix sparse warning] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: tegra: xusb: Add support for power suppliesThierry Reding2-1/+38
Support enabling various supplies needed to provide power to the PLLs and logic used to drive the USB, PCI and SATA pads. Reviewed-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: tegra: xusb: Parse dual-role mode propertyThierry Reding2-0/+24
The device tree bindings document the "mode" property of "ports" subnodes, but the driver was not parsing the property. In preparation for adding role switching, parse the property at probe time. Based on work by JC Kuo <jckuo@nvidia.com>. Reviewed-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: tegra: xusb: Skip single function lane programmingJC Kuo1-1/+5
Tegra186 USB2 pads and USB3 pads do not have hardware mux for changing the pad function. For such "lanes", we can skip the lane mux register programming. Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-20phy: tegra: Convert to use match_string() helperAndy Shevchenko1-14/+1
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: tegra: xusb: Uncomment register writeThierry Reding1-4/+2
The reason why this was originally commented out is no longer clear. The UPHY driver for SATA works fine with or without this change. The reset value of the XDIGCLK_EN bit is 0, so unless programmed by the bootloader this shouldn't make a difference anyway. Define a macro for this bit and uncomment the code. This also fixes a coverity issue brought to my attention by Rohith because not only is the XDIGCLK_EN field modification commented out, but also the register write which causes none of the earlier modifications of the register value to be written to the register and the value being overwritten. Reported-by: Rohith Seelaboyina <rseelaboyina@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-02-21phy: tegra: remove redundant self assignment of 'map'Colin Ian King1-1/+1
The assignment of map to itself is redundant and can be removed. Detected with Coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-15phy: tegra: fix device-tree node lookupsJohan Hovold1-29/+29
Fix child-node lookups during probe, which ended up searching the whole device tree depth-first starting at the parents rather than just matching on their children. To make things worse, some parent nodes could end up being being prematurely freed (by tegra_xusb_pad_register()) as of_find_node_by_name() drops a reference to its first argument. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Cc: stable <stable@vger.kernel.org> # 4.7 Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-26phy: tegra: Handle return value of kasprintfArvind Yadav1-0/+2
kasprintf() can fail and it's return value must be checked. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-11-18phy: fix returnvar.cocci warningsVivek Gautam1-2/+1
Remove unneeded variables when "0" can be returned. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-11-18phy: Fix ptr_ret.cocci warningsVivek Gautam1-8/+2
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10phy: tegra: mark tegra_xusb_lane_lookup_function() staticBaoyou Xie1-1/+2
We get 1 warning when building kernel with W=1: drivers/phy/tegra/xusb.c:104:5: warning: no previous prototype for 'tegra_xusb_lane_lookup_function' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10phy: tegra: add missing header dependenciesBaoyou Xie1-0/+1
We get 5 warnings when building kernel with W=1: drivers/phy/tegra/xusb.c:948:27: warning: no previous prototype for 'tegra_xusb_padctl_get' [-Wmissing-prototypes] drivers/phy/tegra/xusb.c:981:6: warning: no previous prototype for 'tegra_xusb_padctl_put' [-Wmissing-prototypes] drivers/phy/tegra/xusb.c:988:5: warning: no previous prototype for 'tegra_xusb_padctl_usb3_save_context' [-Wmissing-prototypes] drivers/phy/tegra/xusb.c:998:5: warning: no previous prototype for 'tegra_xusb_padctl_hsic_set_idle' [-Wmissing-prototypes] drivers/phy/tegra/xusb.c:1008:5: warning: no previous prototype for 'tegra_xusb_padctl_usb3_set_lfps_detect' [-Wmissing-prototypes] In fact, these functions are declared in linux/phy/tegra/xusb.h, so this patch adds missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-29phy: tegra: Add Tegra210 supportThierry Reding2-0/+2046
Add support for the XUSB pad controller found on Tegra210 SoCs. The hardware is roughly the same, but some of the registers have been moved around and the number and type of supported pads has changed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29phy: Add Tegra XUSB pad controller supportThierry Reding5-0/+3207
Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-02 20:32:47 +0300