summaryrefslogtreecommitdiff
path: root/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-04phy: rockchip-inno-usb2: Return zero after otg syncPeter Geis1-4/+6
The otg sync state patch reuses the ret variable, but fails to set it to zero after use. This leads to a situation when the otg port is in peripheral mode where the otg phy aborts halfway through setup. It also fails to account for a failure to register the extcon notifier. Fix this by using our own variable and skipping otg sync in case of failure. Fixes: 8dc60f8da22f ("phy: rockchip-inno-usb2: Sync initial otg state") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Reported-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220902184543.1234835-1-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-15phy: rockchip-inno-usb2: Ignore OTG IRQs in host modeSamuel Holland1-1/+3
When the OTG port is fixed to host mode, the driver does not request its IRQs, nor does it enable those IRQs in hardware. Similarly, the driver should ignore the OTG port IRQs when handling the shared interrupt. Otherwise, it would update the extcon based on an ID pin which may be in an undefined state, or try to queue a uninitialized work item. Fixes: 6a98df08ccd5 ("phy: rockchip-inno-usb2: Fix muxed interrupt support") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220708061434.38115-1-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: rockchip-inno-usb2: Sync initial otg statePeter Geis1-0/+6
The initial otg state for the phy defaults to device mode. The actual state isn't detected until an ID IRQ fires. Fix this by syncing the ID state during initialization. Fixes: 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220622003140.30365-1-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05phy: rockchip-inno-usb2: Prevent incorrect error on probePeter Geis1-1/+1
If a phy supply is designated but isn't available at probe time, an EPROBE_DEFER is returned. Use dev_err_probe to prevent this from incorrectly printing during boot. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220625212711.558495-1-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-02phy: rockchip-inno-usb2: Clean up some inconsistent indentingJiapeng Chong1-2/+2
Eliminate the follow smatch warning: drivers/phy/rockchip/phy-rockchip-inno-usb2.c:1203 rockchip_usb2phy_probe() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220421203038.4550-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Handle ID IRQSamuel Holland1-0/+85
This supports detecting host mode for the OTG port without an extcon. The rv1108 properties are not updated due to lack of documentation. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-7-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Handle bvalid fallingSamuel Holland1-9/+9
Some SoCs have a bvalid falling interrupt, in addition to bvalid rising. This interrupt can detect OTG cable plugout immediately, so it can avoid the delay until the next scheduled work. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-6-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Support multi-bit mask propertiesSamuel Holland1-1/+1
The "bvalid" and "id" interrupts can trigger on either the rising edge or the falling edge, so each interrupt has two enable bits and two status bits. This change allows using a single property for both bits, checking whether either bit is set. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-5-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handlerSamuel Holland1-4/+0
Clearing the IRQ is atomic, so there is no need to hold the mutex. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Do not check bvalid twiceSamuel Holland1-6/+4
The bvalid interrupt handler already checks bvalid status. The muxed IRQ handler just needs to call the other handler (plus any other handlers that will be added). Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Fix muxed interrupt supportSamuel Holland1-2/+8
This commit fixes two issues with the muxed interrupt handler. First, the OTG port has the "bvalid" interrupt enabled, not "linestate". Since only the linestate interrupt was handled, and not the bvalid interrupt, plugging in a cable to the OTG port caused an interrupt storm. Second, the return values from the individual port IRQ handlers need to be OR-ed together. Otherwise, the lack of an interrupt from the last port would cause the handler to erroneously return IRQ_NONE. Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts") Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: add rk3568 supportPeter Geis1-0/+65
The rk3568 usb2phy is a standalone device with a single muxed interrupt. Add support for the registers to the usb2phy driver. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-7-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support muxed interruptsPeter Geis1-49/+119
The rk3568 usb2phy has a single muxed interrupt that handles all interrupts. Allow the driver to plug in only a single interrupt as necessary. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-6-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support standalone phy nodesPeter Geis1-5/+12
New Rockchip devices have the usb2 phy devices as standalone nodes instead of children of the grf node. Allow the driver to find the grf node from a phandle. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-5-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-23phy: phy-rockchip-inno-usb2: support #address_cells = 2Peter Geis1-1/+10
New Rockchip devices have the usb phy nodes as standalone devices. These nodes have register nodes with #address_cells = 2, but only use 32 bit addresses. Adjust the driver to check if the returned address is "0", and adjust the index in that case. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-4-pgwipeout@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-14phy: rockchip-inno-usb2: remove redundant assignment to variable delayColin Ian King1-1/+0
Variable delay is being assigned to zero and the code falls through to the next case in a switch statement that returns out of the function. The variable is never read in this scenario and so the assignment is redundant and can be removed. Cleans up scan-build static analysis warning: drivers/phy/rockchip/phy-rockchip-inno-usb2.c:753:3: warning: Value stored to 'delay' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211211180054.525368-1-colin.i.king@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01phy: rockchip-inno-usb2: Make use of the helper function ↵Cai Huoqing1-9/+2
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and gif devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210922130024.745-1-caihuoqing@baidu.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-06phy: rockchip-inno-usb2: fix for_each_child.cocci warningskernel test robot1-1/+3
For_each_available_child_of_node should have of_node_put() before break around line 1184. The other jumps out of the loop do contain the put. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Sumera Priyadarsini <sylphrenadin@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2106231617540.99238@hadrien Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-31phy: phy-rockchip-inno-usb2: add support for RK3308 USB phyTobias Schramm1-0/+44
The RK3308 SoC uses a slightly different USB phy than other Rockchip parts. This commit adds support for that phy. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Link: https://lore.kernel.org/r/20210514150044.2099298-3-t.schramm@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-03-20phy: rk-inno-usb2: Decrease verbosity of repeating log.Christoph Muellner1-1/+1
phy-rockchip-inno-usb2 logs the message "phy-ff2c0000.syscon:usb2-phy@100.2: charger = INVALID_CHARGER" constantly with a frequency of about 1 Hz and a verbosity level of INFO. As this is clearly annoying, this patch decreases the log level to DEBUG. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-31phy: phy-rockchip-inno-usb2: add phy description for px30Heiko Stuebner1-0/+1
The px30 soc from Rockchip shares the same register description as the rk3328, so can re-use its definitions. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid propertyEnric Balletbo i Serra1-13/+2
That property is no used in mainline and is not documented. The only board using that property is the rk33-99-evb-rev1 and -rev2 in the vendor kernel. The existence of a further -rev3 (which also looks way better cared for compared rev1+2) indicates that the older ones are probably some sort of preproduction models, where some wiring (on the soc or board) may have gone wrong. It is also not clear why this is a hardware-description or a DT property, so, as noboby seems to care of this just drop reading that property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: rockchip-inno-usb2: fix misspelling and kernel-doc documentationEnric Balletbo i Serra1-16/+19
Fix the typo flase -> false and clean up the kernel-doc documentation in phy-rockchip-inno.usb2.c and fix the following warnings when documentation is built. :58: warning: missing initial short description :69: warning: cannot understand function prototype: 'enum usb_chg_state ' :97: warning: missing initial short description :136: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port_cfg ' :157: warning: cannot understand function prototype: 'struct rockchip_usb2phy_cfg ' :163: warning: Function parameter or member 'port_cfgs' not described in 'rockchip_usb2phy_cfg' :187: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port ' :204: warning: Function parameter or member 'port_cfg' not described in 'rockchip_usb2phy_port' :207: warning: missing initial short description :234: warning: Function parameter or member 'dev' not described in 'rockchip_usb2phy' :234: warning: Function parameter or member 'clk480m_hw' not described in 'rockchip_usb2phy' Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Use of_node_name_eq for node name comparisonsRob Herring1-3/+3
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: Convert to using %pOFn instead of device_node.nameRob Herring1-4/+4
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-09-05Merge tag 'char-misc-4.14-rc1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.14-rc1. Lots of different stuff in here, it's been an active development cycle for some reason. Highlights are: - updated binder driver, this brings binder up to date with what shipped in the Android O release, plus some more changes that happened since then that are in the Android development trees. - coresight updates and fixes - mux driver file renames to be a bit "nicer" - intel_th driver updates - normal set of hyper-v updates and changes - small fpga subsystem and driver updates - lots of const code changes all over the driver trees - extcon driver updates - fmc driver subsystem upadates - w1 subsystem minor reworks and new features and drivers added - spmi driver updates Plus a smattering of other minor driver updates and fixes. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits) ANDROID: binder: don't queue async transactions to thread. ANDROID: binder: don't enqueue death notifications to thread todo. ANDROID: binder: Don't BUG_ON(!spin_is_locked()). ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl ANDROID: binder: push new transactions to waiting threads. ANDROID: binder: remove proc waitqueue android: binder: Add page usage in binder stats android: binder: fixup crash introduced by moving buffer hdr drivers: w1: add hwmon temp support for w1_therm drivers: w1: refactor w1_slave_show to make the temp reading functionality separate drivers: w1: add hwmon support structures eeprom: idt_89hpesx: Support both ACPI and OF probing mcb: Fix an error handling path in 'chameleon_parse_cells()' MCB: add support for SC31 to mcb-lpc mux: make device_type const char: virtio: constify attribute_group structures. Documentation/ABI: document the nvmem sysfs files lkdtm: fix spelling mistake: "incremeted" -> "incremented" perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file nvmem: include linux/err.h from header ...
2017-08-22phy: rockchip-inno-usb2: add support of usb2-phy for rv1108 SoCsFrank Wang1-0/+43
This adds support usb2-phy for rv1108 SoCs and amend phy Documentation. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: rockchip-inno-usb2: add support for otg-mux interruptFrank Wang1-13/+50
The otg-id/otg-bvalid/linestate interrupts are multiplexed together in otg-port on some Rockchip SoC (e.g RV1108), this patch add support for it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: rockchip-inno-usb2: add support for rockchip,usbgrf propertyFrank Wang1-38/+71
The registers of usb-phy are distributed in grf and usbgrf on some Rockchip SoCs (e.g RV1108), this patch add a new rockchip,usbgrf property to support this companion grf design. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-03phy: rockchip-inno-usb2: Replace the extcon APIChanwoo Choi1-5/+5
This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state() - extcon_set_cable_state_() -> extcon_set_state_sync() Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-06-06phy: rockchip-inno-usb2: add support of usb2-phy for rk3228 SoCsFrank Wang1-0/+60
This adds support usb2-phy for rk3228 SoCs and amend phy Documentation. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06phy: rockchip-inno-usb2: add one phy comprises with two host-ports supportWilliam Wu1-3/+6
At the current rockchip-inno-usb2 phy driver framework, it can only support usb2-phy which comprises with one otg-port and one host-port. However, some Rockchip SoCs' (e.g RK3228, RK3229) usb2-phy comprises with two host-ports, so we use index of otg id for one host-port configuration, and make it work the same as otg-port host mode. Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06phy: rockchip-inno-usb2: increase otg sm work first schedule timeWilliam Wu1-1/+1
In rockchip-inno-usb2 phy driver, we use otg_sm_work to dynamically manage power consumption for phy otg-port. If the otg-port works as peripheral mode and does not communicate with usb host, we will suspend phy. But once suspend phy, the phy no longer has any internal clock running, include the utmi_clk which supplied for usb controller. So if we suspend phy before usb controller init, it will cause usb controller fail to initialize. Specifically, without this patch, the observed order is: 1. unplug usb cable 2. start system, do dwc2 controller probe 3. dwc2_lowlevel_hw_enable() - phy_init() - rockchip_usb2phy_init() - schedule otg_sm_work after 2s put phy in suspend, and close utmi_clk 4. dwc2_hsotg_udc_start() - fail to initialize the usb core Generally, dwc2_hsotg_udc_start() can be called within 5s after start system on Rockchip platform, so we increase the the first schedule delay time to 6s for otg_sm_work afer usb controller calls phy_init(), this can make sure that the usb controller completes initialization before phy enter suspend. Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06phy: rockchip-inno-usb2: add a delay after phy resumeWilliam Wu1-0/+3
When resume phy, it need about 1.5 ~ 2ms to wait for utmi_clk which used for USB controller to become stable. Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01phy: Group vendor specific phy driversVivek Gautam1-0/+1284
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-18 17:48:43 +0300