summaryrefslogtreecommitdiff
path: root/drivers/phy/phy-omap-usb2.c
AgeCommit message (Collapse)AuthorFilesLines
2015-12-21phy: omap-usb2: use *syscon* framework API to power on/off the PHYKishon Vijay Abraham I1-17/+75
Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-12-21phy: omap-usb2: use omap_usb_power_off to power off the PHY during probeKishon Vijay Abraham I1-1/+1
No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once phy-omap-usb2 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used omap_usb_power_off to power off the PHY. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Roger Quadros <rogerq@ti.com>
2015-08-03phy: Constify struct phy_ops variablesAxel Lin1-1/+1
The phy_ops variables are never modified after initialized in these drivers, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-12phy: omap-usb2: invoke pm_runtime_disable on error pathKishon Vijay Abraham I1-0/+1
if devm_clk_get for wkupclk fails, there will be an unbalanced pm_runtime_enable. Fix it here. Reported-by: Benoit Parrot <bparrot@ti.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-10Merge tag 'for-4.1' of ↵Greg Kroah-Hartman1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: New Features ============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF
2015-03-13phy: omap-usb2: Fix missing clk_prepare call when using old dt nameAxel Lin1-2/+3
Current code does not call clk_prepare(phy->optclk) when using the old usb_otg_ss_refclk960m name. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: ti/omap: Fix modaliasAxel Lin1-1/+1
Remove extra space in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: omap-usb2: Remove unneeded ifdef CONFIG_OF guard and of_match_ptrAxel Lin1-4/+2
if !CONFIG_OF, the probe fails. This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are not needed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-12-19Merge tag 'pm+acpi-3.19-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
2014-12-13phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki1-1/+1
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/phy/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-27Merge tag 'for-3.19' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: Improvements in phy-core specifically on PHY core finds the PHY in the case of non-dt boot. Adds three new PHY drivers using the PHY framework and some miscellaneous fixes and cleanups.
2014-11-25Merge tag 'usb-for-v3.19' of ↵Greg Kroah-Hartman1-9/+5
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.19 merge window This time, a very pull request with 216 non-merge commits. Most of the commits contained here are sparse or coccinelle fixes ranging from missing 'static' to returning 0 in case of errors. More importantly, we have the removal the now unnecessary 'driver' argument to ->udc_stop(). DWC2 learned about Dual-Role builds. Users of this IP can now have a single driver built for host and device roles. DWC3 got support for two new HW platforms: Exynos7 and AMD. The Broadcom USB 3.0 Device Controller IP is now supported and so is PLX USB338x, which means DWC3 has lost is badge as the only USB 3.0 peripheral IP supported on Linux. Thanks for Tony Lindgren's work, we can now have a distro-like kernel where all MUSB glue layers can be built into the same kernel (statically or dynamically linked) and it'll work in PIO (DMA will come probably on v3.20). Other than these, the usual set of cleanups and non-critical fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-22phy: remove the old lookup methodHeikki Krogerus1-1/+1
The users of the old method are now converted to the new one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [ kishon@ti.com : made phy-berlin-usb.c and phy-miphy28lp.c to use the updated devm_phy_create API.] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-06phy: omap-usb2: Enable runtime PM of omap-usb2 phy properlyOussama Ghorbel1-2/+4
The USB OTG port does not work since v3.16 on omap platform. This is a regression introduced by the commit eb82a3d846fa (phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove). This because the call to pm_runtime_enable() function is moved after the call to devm_phy_create() function, which has side effect since later in the subsequent calls of devm_phy_create() there is a check with pm_runtime_enabled() to configure few things. Fixes: eb82a3d846fa Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com> Tested-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03usb: rename phy to usb_phy in OTGAntoine Tenart1-3/+3
This patch prepares the introduction of the generic PHY support in the USB OTG common functions. The USB PHY member of the OTG structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. Renaming this pointer will allow to keep the compatibility for USB PHY drivers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart1-6/+2
Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-24phy: remove .owner field for drivers using module_platform_driverPeter Griffin1-1/+0
This patch removes the superflous .owner field for drivers which use the module_platform_driver or platform_driver_register api, as this is overriden in __platform_driver_register. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-09-24phy: phy-omap-usb2: Remove unncessary site specific OOM messagesPeter Griffin1-6/+2
The site specific OOM messages are unncessary, because they duplicate messages from the memory subsystem which include dump_stack(). Removing these superflous messages makes the kernel smaller. A discussion here http://patchwork.ozlabs.org/patch/324158/ found that all error paths from kzalloc will print a error message, and that any error path which maybe found which doesn't would be considered a bug in kzalloc. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-07-22phy: core: Let node ptr of PHY point to PHY and not of PHY providerKishon Vijay Abraham I1-1/+1
In case of multi-phy PHY providers, each PHY should be modeled as a sub node of the PHY provider. Then each PHY will have a different node pointer (node pointer of sub node) than that of PHY provider. Added this provision in the PHY core. Also fixed all drivers to use the updated API. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-07-12phy: omap-usb2: Balance pm_runtime_enable() on probe failure and removeRoger Quadros1-2/+5
If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-12phy: omap-usb2: fix devm_ioremap_resource error detection codeHimangi Saraogi1-2/+2
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-08phy: omap-usb2: Use generic clock names "wkupclk" and "refclk"Roger Quadros1-7/+23
As clocks might be named differently on multiple platforms, use a generic name in the driver and allow device tree node to specify the platform specific clock name. Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: rename struct omap_control_usb to struct omap_control_phyKishon Vijay Abraham I1-4/+4
Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-09phy: omap-usb2: Add different compatible for OMAP5George Cherian1-0/+9
Add a new compatible for OMAP5 since it does not use any of the OTG operations as of now. HAS_SRP and SET_VBUS functionalities are used only for OMAP4. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: omap-usb2: Provide workaround for USB2PHY false disconnectAustin Beam1-0/+44
Enable the dra7x errata workaround for false disconnect problem with USB2PHY. False disconnects were detected with some of the devices. Reduce the sensitivity of the disconnect logic within the USB2PHY subsystem to enusre these false disconnects are not registered. [george.cherian@ti.com] While at that, pass proper flags for each SoC's. This is a common driver used across OMAP4,OMAP5,DRA7xx and AM437x USB2PHY. False disconnect workaround is currently applicable for only DRA7x. Signed-off-by: Austin Beam <austinbeam@ti.com> Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-09phy: omap-usb2: Adapt phy-omap-usb2 for AM437xGeorge Cherian1-12/+37
Adapt phy-omap-usb2 driver for AM437x. - Add new comaptible "ti,am437x-usb2" for AM437x - Pass proper data to differentiate AM437x and others. - AM437x doesnot support set_vbus and start_srp. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-07phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/Kishon Vijay Abraham I1-1/+1
No functional change. Moved omap_usb.h from linux/usb/ to linux/phy/. Also removed the unused members of struct omap_usb (after phy-omap-pipe3 started using it's own header file) Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-03-06usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2Kishon Vijay Abraham I1-25/+0
Now that omap-usb2 is adapted to the new generic PHY framework, *set_suspend* ops can be removed from omap-usb2 driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-02-19phy: let phy_provider_register be the last step in registering PHYKishon Vijay Abraham I1-5/+5
Registering phy_provider before creating the PHY can result in PHY callbacks being invoked which will lead to aborts. In order to avoid this invoke phy_provider_register after phy_create and phy_set_drvdata. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-04usb: phy: omap-usb2: Don't use omap_get_control_dev()Roger Quadros1-8/+23
omap_get_control_dev() is being deprecated as it doesn't support multiple instances. As control device is present only from OMAP4 onwards which supports DT only, we use phandles to get the reference to the control device. As we don't support non-DT boot, we just bail out on probe if device node is not present. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-28usb: phy: omap-usb2: use the new generic PHY frameworkKishon Vijay Abraham I1-0/+309
Used the generic PHY framework API to create the PHY. Now the power off and power on are done in omap_usb_power_off and omap_usb_power_on respectively. The omap-usb2 driver is also moved to driver/phy. However using the old USB PHY library cannot be completely removed because OTG is intertwined with PHY and moving to the new framework will break OTG. Once we have a separate OTG state machine, we can get rid of the USB PHY library. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>