| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is a fix for a broken strscpy() conversion that landed in
the merge window and broke early parsing of the kernel command line.
- Fix an incorrect mask in the CXL PMU driver
- Fix a regression in early parsing of the kernel command line
- Fix an IP checksum OoB access reported by syzbot"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
arm64/sysreg: Fix broken strncpy() -> strscpy() conversion
perf: CXL: fix mismatched number of counters mask
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
The number of Count Units field is described as 6 bits long
in the CXL 3.0 specification. However, its mask value was
only declared as 5 bits long.
Signed-off-by: Jeongtae Park <jtp.park@samsung.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230905123309.775854-1-jtp.park@samsung.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- AMD IBS improvements
- Intel PMU driver updates
- Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events
- Micro-optimize software events and the ring-buffer code
- Misc cleanups & fixes
* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
perf/x86/intel: Add Crestmont PMU
x86/cpu: Update Hybrids
x86/cpu: Fix Crestmont uarch
x86/cpu: Fix Gracemont uarch
perf: Remove unused extern declaration arch_perf_get_page_size()
perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
perf/mem: Introduce PERF_MEM_LVLNUM_UNC
perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
locking/arch: Avoid variable shadowing in local_try_cmpxchg()
perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
perf/x86: Use local64_try_cmpxchg
perf/amd: Prevent grouping of IBS events
|
|
Huang Shijie reports that, when profiling a guest from the host
with a number of events that exceeds the number of available
counters, the reported counts are wildly inaccurate. Without
the counter oversubscription, the reported counts are correct.
Their investigation indicates that upon counter rotation (which
takes place on the back of a timer interrupt), we fail to
re-apply the guest EL0 enabling, leading to the counting of host
events instead of guest events.
In order to solve this, add yet another hook between the host PMU
driver and KVM, re-applying the guest EL0 configuration if the
right conditions apply (the host is VHE, we are in interrupt
context, and we interrupted a running vcpu). This triggers a new
vcpu request which will apply the correct configuration on guest
reentry.
With this, we have the correct counts, even when the counters are
oversubscribed.
Reported-by: Huang Shijie <shijie@os.amperecomputing.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Tested_by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org
|
|
ACPI TRBE does not have a HID for identification which could create and add
a platform device into the platform bus. Also without a platform device, it
cannot be probed and bound to a platform driver.
This creates a dummy platform device for TRBE after ascertaining that ACPI
provides required interrupts uniformly across all cpus on the system. This
device gets created inside drivers/perf/arm_pmu_acpi.c to accommodate TRBE
being built as a module.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-3-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sanity checking all the GICC tables for same interrupt number, and ensuring
a homogeneous ACPI based machine, could be used for other platform devices
as well. Hence this refactors arm_spe_acpi_register_device() into a common
helper arm_acpi_register_pmu_device().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230817055405.249630-2-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We used to unconditionnally expose the cycle and instret csrs to
userspace, which gives rise to security concerns.
So now we only allow access to hw counters from userspace through the perf
framework which will handle context switches, per-task events...etc. A
sysctl allows to revert the behaviour to the legacy mode so that userspace
applications which are not ready for this change do not break.
But the default value is to allow userspace only through perf: this will
break userspace applications which rely on direct access to rdcycle.
This choice was made for security reasons [1][2]: most of the applications
which use rdcycle can instead use rdtime to count the elapsed time.
[1] https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/REWcwYnzsKE?pli=1
[2] https://www.youtube.com/watch?v=3-c4C_L2PRQ&ab_channel=IEEESymposiumonSecurityandPrivacy
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
|
|
Implement the needed callbacks in the legacy driver so that we can
directly access the counters through perf in userspace.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Provide all the necessary bits in the generic riscv pmu driver to be
able to mmap perf events in userspace: the heavy lifting lies in the
driver backend, namely the legacy and sbi implementations.
Note that arch_perf_update_userpage is almost a copy of arm64 code.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
That's just cosmetic, no functional changes.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
RISCV_PMU_LEGACY_INSTRET used to be set to 1 whereas the offset of this
hardware counter from CSR_CYCLE is actually 2: make this offset match the
real hw offset so that we can directly expose those values to userspace.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
In current driver, counter0 will be enabled after ddr_perf_pmu_enable()
is called even though none of the 4 counters are used. This will cause
counter0 continue to count until ddr_perf_pmu_disabled() is called. If
pmu is not disabled all the time, the pmu interrupt will be asserted
from time to time due to counter0 will overflow and irq handler will
clear it. It's not an expected behavior. This patch will not enable
counter0 if none of 4 counters are used.
Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.
Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PCIe PMUs locate on different NUMA node but currently we don't
consider it and likely stack all the sessions on the same CPU:
[root@localhost tmp]# cat /sys/devices/hisi_pcie*/cpumask
0
0
0
0
0
0
This can be optimize a bit to use a local CPU for the PMU.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230815131010.2147-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
dependency
The following circular locking dependency was reported when running
cpus online/offline test on an arm64 system.
[ 84.195923] Chain exists of:
dmc620_pmu_irqs_lock --> cpu_hotplug_lock --> cpuhp_state-down
[ 84.207305] Possible unsafe locking scenario:
[ 84.213212] CPU0 CPU1
[ 84.217729] ---- ----
[ 84.222247] lock(cpuhp_state-down);
[ 84.225899] lock(cpu_hotplug_lock);
[ 84.232068] lock(cpuhp_state-down);
[ 84.238237] lock(dmc620_pmu_irqs_lock);
[ 84.242236]
*** DEADLOCK ***
The following locking order happens when dmc620_pmu_get_irq() calls
cpuhp_state_add_instance_nocalls().
lock(dmc620_pmu_irqs_lock) --> lock(cpu_hotplug_lock)
On the other hand, the calling sequence
cpuhp_thread_fun()
=> cpuhp_invoke_callback()
=> dmc620_pmu_cpu_teardown()
leads to the locking sequence
lock(cpuhp_state-down) => lock(dmc620_pmu_irqs_lock)
Here dmc620_pmu_irqs_lock protects both the dmc620_pmu_irqs and the
pmus_node lists in various dmc620_pmu instances. dmc620_pmu_get_irq()
requires protected access to dmc620_pmu_irqs whereas
dmc620_pmu_cpu_teardown() needs protection to the pmus_node lists.
Break this circular locking dependency by using two separate locks to
protect dmc620_pmu_irqs list and the pmus_node lists respectively.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230812235549.494174-1-longman@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On my ACPI based arm64 server, if the SMMUv3 PMU is configured as
module it won't be loaded automatically after booting even if the
device has already been scanned and added. It's because the module
lacks a platform alias, the uevent mechanism and userspace tools
like udevd make use of this to find the target driver module of the
device. This patch adds the missing platform alias of the module,
then module will be loaded automatically if device exists.
Before this patch:
[root@localhost tmp]# modinfo arm_smmuv3_pmu | grep alias
alias: of:N*T*Carm,smmu-v3-pmcgC*
alias: of:N*T*Carm,smmu-v3-pmcg
After this patch:
[root@localhost tmp]# modinfo arm_smmuv3_pmu | grep alias
alias: platform:arm-smmu-v3-pmcg
alias: of:N*T*Carm,smmu-v3-pmcgC*
alias: of:N*T*Carm,smmu-v3-pmcg
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814131642.65263-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The comments in armv8pmu_[enable|disable]_event() are blindingly obvious,
and does not contribute in making things any better. Let's drop them off.
Functional change is not intended.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230802090853.1190391-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CMN-700 r3 has a special configuration option for a so-called "Super
Home Node", which is a superset of the standard HN-F that also manages
remote-chip coherency for multi-chip setups. As such it has a similar
but expanded set of PMU events compared to HN-F, with some additional
filtering options to boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/49153b72253f6af0e625cb55b9e1b825b110c49c.1688746690.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Refactor the macros for defining HN-F events with additional selectors,
so they can be shared with another upcoming similar-but-distinct HN
type. No functional change intended.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0f05327941e06c665dbfd47e03fad29276b9e63c.1688746690.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As the name suggests, the "partial DAT flit" event is only counted for
the DAT channel, and furthermore is only applicable to device ports, not
mesh links (strictly it's only device ports with CHI-A requesters
connected, but detecting that degree of detail is more bother than it's
worth). Stop generating spurious event aliases for other combinations
which aren't meaningful.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b01a58e3ff05c322547fbfd015f6dbfedf555ed3.1688746690.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174832.4061752-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for the Arm Cortex-A520, Cortex-A715, Cortex-A720,
Cortex-X3, and Cortex-X4 CPU PMUs. They are straight-forward additions
with just new compatible strings.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230706205505.308523-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This driver supports working without ACPI since commit 3f7be43561766
("perf/smmuv3: Add devicetree support"), so remove the build dependency.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230706-smmuv3-pmu-noacpi-v1-1-7083ef189158@axis.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704093556.17926-1-frank.li@vivo.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
To allow userspace to identify the specific implementation of the device,
add an "identifier" sysfs file.
The perf tool can match the Yitian 710 DDR metric through the identifier.
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/1687245156-61215-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit bd2756811766 ("perf: Rewrite core context handling") the
relationship between perf_event_context and PMUs has changed so that
the error scenario that PERF_PMU_CAP_HETEROGENEOUS_CPUS originally
silenced no longer exists.
Remove the capability and associated comment to avoid confusion that it
actually influences any perf core behavior. This change should be a
no-op.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230724134500.970496-4-james.clark@arm.com
|
|
This capability gives us the ability to open PERF_TYPE_HARDWARE and
PERF_TYPE_HW_CACHE events on a specific PMU for free. All the
implementation is contained in the Perf core and tool code so no change
to the Arm PMU driver is needed.
The following basic use case now results in Perf opening the event on
all PMUs rather than picking only one in an unpredictable way:
$ perf stat -e cycles -- taskset --cpu-list 0,1 stress -c 2
Performance counter stats for 'taskset --cpu-list 0,1 stress -c 2':
963279620 armv8_cortex_a57/cycles/ (99.19%)
752745657 armv8_cortex_a53/cycles/ (94.80%)
Fixes: 55bcf6ef314a ("perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE")
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230724134500.970496-2-james.clark@arm.com
|
|
Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.
However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
Modules linked in:
CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
Hardware name: SiFive (DT)
epc : riscv_pmu_start+0x7c/0x8e
ra : riscv_pmu_start+0x28/0x8e
epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
t5 : 0000000700000000 t6 : ffffaf8005269870
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
[<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
[<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
[<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
[<ffffffff800b5640>] update_process_times+0x9a/0xba
[<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
[<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
[<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
[<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
[<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
[<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
[<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36
After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.
Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2bb4 ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull CXL updates from Dan Williams:
"The highlights in terms of new functionality are support for the
standard CXL Performance Monitor definition that appeared in CXL 3.0,
support for device sanitization (wiping all data from a device),
secure-erase (re-keying encryption of user data), and support for
firmware update. The firmware update support is notable as it reuses
the simple sysfs_upload interface to just cat(1) a blob to a sysfs
file and pipe that to the device.
Additionally there are a substantial number of cleanups and
reorganizations to get ready for RCH error handling (RCH == Restricted
CXL Host == current shipping hardware generation / pre CXL-2.0
topologies) and type-2 (accelerator / vendor specific) devices.
For vendor specific devices they implement a subset of what the
generic type-3 (generic memory expander) driver expects. As a result
the rework decouples optional infrastructure from the core driver
context.
For RCH topologies, where the specification working group did not want
to confuse pre-CXL-aware operating systems, many of the standard
registers are hidden which makes support standard bus features like
AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
the driver to help the PCI-AER core. Bjorn is on board with this
direction but a late regression disocvery means the completion of this
functionality needs to cook a bit longer, so it is code
reorganizations only for now.
Summary:
- Add infrastructure for supporting background commands along with
support for device sanitization and firmware update
- Introduce a CXL performance monitoring unit driver based on the
common definition in the specification.
- Land some preparatory cleanup and refactoring for the anticipated
arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
topology) error handling.
- Rework CPU cache management with respect to region configuration
(device hotplug or other dynamic changes to memory interleaving)
- Fix region reconfiguration vs CXL decoder ordering rules"
* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
cxl: Fix one kernel-doc comment
cxl/pci: Use correct flag for sanitize polling
docs: perf: Minimal introduction the the CXL PMU device and driver
perf: CXL Performance Monitoring Unit driver
tools/testing/cxl: add firmware update emulation to CXL memdevs
tools/testing/cxl: Use named effects for the Command Effect Log
tools/testing/cxl: Fix command effects for inject/clear poison
cxl: add a firmware update mechanism using the sysfs firmware loader
cxl/test: Add Secure Erase opcode support
cxl/mem: Support Secure Erase
cxl/test: Add Sanitize opcode support
cxl/mem: Wire up Sanitization support
cxl/mbox: Add sanitization handling machinery
cxl/mem: Introduce security state sysfs file
cxl/mbox: Allow for IRQ_NONE case in the isr
Revert "cxl/port: Enable the HDM decoder capability for switch ports"
cxl/memdev: Formalize endpoint port linkage
cxl/pci: Unconditionally unmask 256B Flit errors
cxl/region: Manage decoder target_type at decoder-attach time
cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
|
|
CXL rev 3.0 introduces a standard performance monitoring hardware
block to CXL. Instances are discovered using CXL Register Locator DVSEC
entries. Each CXL component may have multiple PMUs.
This initial driver supports a subset of types of counter.
It supports counters that are either fixed or configurable, but requires
that they support the ability to freeze and write value whilst frozen.
Development done with QEMU model which will be posted shortly.
Example:
$ perf stat -a -e cxl_pmu_mem0.0/h2d_req_snpcur/ -e cxl_pmu_mem0.0/h2d_req_snpdata/ -e cxl_pmu_mem0.0/clock_ticks/ sleep 1
Performance counter stats for 'system wide':
96,757,023,244,321 cxl_pmu_mem0.0/h2d_req_snpcur/
96,757,023,244,365 cxl_pmu_mem0.0/h2d_req_snpdata/
193,514,046,488,653 cxl_pmu_mem0.0/clock_ticks/
1.090539600 seconds time elapsed
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230526095824.16336-5-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Perf gets the number of supported counters from SBI. If it happens that
the number of returned counters more than RISCV_MAX_COUNTERS the code
trusts it. It does not lead to an immediate problem but can potentially
lead to it. Prevent getting more than RISCV_MAX_COUNTERS from SBI.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230505072058.1049732-1-v.v.mitrofanov@yadro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently the PMU driver is using DT based lookup to
find the INTC node for sscofpmf extension. This will not work
for ACPI based systems causing the driver to fail to register
the PMU overflow interrupt handler.
Hence, change the code to use the standard interface to find
the INTC node which works irrespective of DT or ACPI.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20230607112417.782085-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
On HiSilicon Hip09 platform, there are 4 UC (unified cache) modules
on each chip CCL (CPU Cluster). UC is a cache that provides
coherence between NUMA and UMA domains. It is located between L2
and Memory System. Many PMU events are supported. Let's support
the UC PMU driver using the HiSilicon uncore PMU framework.
* rd_req_en : rd_req_en is the abbreviation of read request tracetag
enable and allows user to count only read operations. Details are listed
in the hisi-pmu document at Documentation/admin-guide/perf/hisi-pmu.rst
* srcid_en & srcid: Allows users to filter statistical information based
on specific CPU/ICL by srcid.
srcid_en depends on rd_req_en being enabled.
* uring_channel: Allows users to filter statistical information based on
the specified tx request uring channel.
uring_channel only supported events: [0x47 ~ 0x59].
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Compared to the original PA device, H60PA offers higher bandwidth.
The H60PA is a new device and we use HID to differentiate them.
The events supported by PAv3 and PAv2 are different. The PAv3 PMU
removed some events which are supported by PAv2 PMU. The older PA
PMU driver will probe v3 as v2. Therefore PA events displayed by
"perf list" cannot work properly. We add the HISI0275 HID for PAv3
PMU to distinguish different.
For each H60PA PMU, except for the overflow interrupt register, other
functions of the H60PA PMU are the same as the original PA PMU module.
It has 8-programable counters and each counter is free-running.
Interrupt is supported to handle counter (64-bits) overflow.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add missing MODULE_DEVICE_TABLE definition to generate modalias, which
enables module autoloading.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230615232630.304870-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Expose a sysfs identifier encapsulating the CMN part number and revision
so that jevents can narrow down a fundamental set of possible events for
calculating metrics. Configuration-dependent aspects - such as whether a
given node type is present, and/or a given node ID is valid - are still
not covered, and in general it's hard to see how userspace could handle
them, so we won't be removing any data or validation logic from the
driver any time soon, but at least it's a step in a useful direction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Tested-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Link: https://lore.kernel.org/r/b8a14c14fcdf028939ebf57849863e8ae01743de.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CMN implements a set of CoreSight-format peripheral ID registers which
in principle we should be able to use to identify the hardware. However
so far we have avoided trying to use the part number field since the
TRMs have all described it as "configuration dependent". It turns out,
though, that this is a quirk of the documentation generation process,
and in fact the part number should always be a stable well-defined field
which we can trust.
To that end, revamp our model detection to rely less on ACPI/DT, and
pave the way towards further using the hardware information as an
identifier for userspace jevent metrics. This includes renaming the
revision constants to maximise readability.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/3c791eaae814b0126f9adbd5419bfb4a600dade7.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a cpumask for the DMC620 PMU. As it is an uncore PMU, perf
userspace tool only needs to open a single counter on the CPU
specified by the CPU mask for each event on a given DMC620 device.
Signed-off-by: Xin Yang <xin.yang@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230613013423.2078397-1-xin.yang@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the recent feature added to enable perf events to use pseudo NMIs as
interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). To cope with that, override
arch_perf_nmi_is_available() to let the watchdog framework know PMU not
ready, and inform the framework to re-initialize lockup detection once PMU
has been initialized.
[dianders@chromium.org: only HAVE_HARDLOCKUP_DETECTOR_PERF if the PMU config is enabled]
Link: https://lkml.kernel.org/r/20230523073952.1.I60217a63acc35621e13f10be16c0cd7c363caf8c@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.18.Ia44852044cdcb074f387e80df6b45e892965d4a1@changeid
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add ddr performance monitor support for i.MX93.
There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counter that counts only clock cycles.
- Counter 1-10 are 32-bit counters that can monitor counter-specific
events in addition to counting reference events.
For example:
perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls
Besides, this ddr pmu support AXI filter capability. It's implemented as
counter-specific events. It now supports read transaction, write transaction
and read beat events which corresponding respecitively to counter 2, 3 and 4.
axi_mask and axi_id need to be as event parameters.
For example:
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230418102910.2065651-1-xu.yang_2@nxp.com
[will: Remove redundant error message on platform_get_irq() failure]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The functional paths of the driver need not care about ACPI, so abstract
the property of atomic doubleword access as its own flag (repacking the
structure for a better fit). We also do not need to go poking directly
at the APMT for standard resources which the ACPI layer has already
dealt with, so deal with the optional MMIO page and interrupt in the
normal firmware-agnostic manner. The few remaining portions of probing
that *are* APMT-specific can still easily retrieve the APMT pointer as
needed without us having to carry a duplicate copy around everywhere.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/88f97268603e1aa6016d178982a1dc2861f6770d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Build-wise, the ACPI dependency consists of only a couple of things
which could probably stand being factored out into ACPI helpers anyway.
However for the immediate concern of working towards Devicetree support
here, it's easy enough to make a few tweaks to contain the affected code
locally, such that we can relax the Kconfig dependency.
Reviewed-and-Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9d126711c7498b199b3e6f5cf48ca60ffb9df54c.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ARM_CSPMU_EVENT_ATTR() defines a struct perf_pmu_events_attr, so
arm_cspmu_sysfs_event_show() should not be interpreting it as struct
dev_ext_attribute.
Fixes: e37dfd65731d ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/27c0804af64007b2400abbc40278f642ee6a0a29.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
