summaryrefslogtreecommitdiff
path: root/drivers/pcmcia/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2014-11-25PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.Ralf Baechle1-2/+0
For Alchemy 64BIT_PHYS_ADDR is already always set in arch/mips/Kconfig. Also 64BIT_PHYS_ADDR is about to be removed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-07Merge branch 'next' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-07-10pcmcia: pxa2xx: fix logic for lubbockArnd Bergmann1-1/+1
The lubbock platform uses the sa1111 companion chip with a pxa250 CPU, which means it requires both the PCMCIA_SA1111 and the PCMCIA_PXA2XX code to be built into the kernel. Unfortunately, the Makefile and Kconfig don't agree on how this is accomplished, leading to a situation where you get this link error when building a lubbock kernel with PCMCIA_SA1111 enabled but PCMCIA_PXA2XX disabled: ERROR: "pxa2xx_configure_sockets" [drivers/pcmcia/sa1111_cs.ko] undefined! ERROR: "pxa2xx_drv_pcmcia_ops" [drivers/pcmcia/sa1111_cs.ko] undefined! ERROR: "pxa2xx_drv_pcmcia_add_one" [drivers/pcmcia/sa1111_cs.ko] undefined! This patch changes the Kconfig code to disallow that particular configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26pcmcia: Remove m8xx_pcmcia driverScott Wood1-10/+0
This driver doesn't build, and apparently has not built since arch/ppc was removed in 2008 (when mk_int_int_mask was removed from asm/irq.h, among other build errors). A few weeks ago I asked whether anyone was actively maintaining this code, and got no positive response: http://patchwork.ozlabs.org/patch/352082/ So, let's remove it. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: linux-pcmcia@lists.infradead.org Cc: Paul Bolle <pebolle@tiscali.nl>
2013-07-02Merge tag 'driver-core-3.11-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed)" * tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) driver core: device.h: fix doc compilation warnings firmware loader: fix another compile warning with PM_SLEEP unset build some drivers only when compile-testing firmware loader: fix compile warning with PM_SLEEP set kobject: sanitize argument for format string sysfs_notify is only possible on file attributes firmware loader: simplify holding module for request_firmware firmware loader: don't export cache_firmware and uncache_firmware drivers/base: Use attribute groups to create sysfs memory files firmware loader: fix compile warning firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER Documentation: Updated broken link in HOWTO Finally eradicate CONFIG_HOTPLUG driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware Documentation: Tidy up some drivers/base/core.c kerneldoc content. platform_device: use a macro instead of platform_driver_register firmware: move EXPORT_SYMBOL annotations firmware: Avoid deadlock of usermodehelper lock at shutdown dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly ...
2013-06-18pcmcia: Remove ARCH_CLPS711X dependencyAlexander Shiyan1-1/+1
No dependencies of PCMCIA and ARCH_CLPS711X. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06pcmcia: at91_cf: add support for DTJoachim Eastwood1-1/+1
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04Finally eradicate CONFIG_HOTPLUGStephen Rothwell1-1/+0
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/pcmcia: remove depends on CONFIG_EXPERIMENTALKees Cook1-2/+2
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: Manuel Lauss <manuel.lauss@googlemail.com> CC: Dominik Brodowski <linux@dominikbrodowski.net> CC: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-05-07pcmcia: add driver for hx4700Paul Parsons1-1/+1
This patch adds support for the HP iPAQ hx4700 to the existing pxa2xx-pcmcia driver. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-21PCMCIA: make lubbock socket driver part of sa1111_csRussell King1-2/+3
Lubbock is just another SA1111 socket driver, so now that Kconfig has better control of which files get built, we can sanitize the build for this. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: add Kconfig control for building sa11xx_base.cRussell King1-0/+5
sa11xx_base.c is currently built when either PCMCIA_SA1100 or PCMCIA_SA1111 are selected. Let's move the logic into Kconfig. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-08MIPS: Alchemy: Basic support for the DB1300 board.Manuel Lauss1-2/+2
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2867/ Patchwork: https://patchwork.linux-mips.org/patch/2919/ Patchwork: https://patchwork.linux-mips.org/patch/2928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: remove PB1000 supportManuel Lauss1-4/+0
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-6/+6
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20ARM: pxa: Colibri PXA320 PCMCIA driverMarek Vasut1-1/+2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Toradex Colibri PXA270 CF supportMarek Vasut1-1/+1
This driver also contains structures to eventually support PXA320. This is planned to be added in a later patch. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-06Merge branch 'devel' of ↵Russell King1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/palmt5.c arch/arm/mach-pxa/palmtreo.c
2010-08-05MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMYManuel Lauss1-2/+2
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05[ARM] pxa/balloon3: PCMCIA SupportMarek Vasut1-1/+1
This driver adds support for the on-board CF socket. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-21/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-17pcmcia: disable PCMCIA ioctl also for ARMDominik Brodowski1-20/+0
As per a3f916f2c84f2b9e1d32cc0dbfe326a9e380dbfb, disable the long obsolete PCMCIA ioctl also for ARM. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-11[ARM] pxa: add support for Voipac PXA270 PCMCIAMarek Vasut1-1/+2
PCMCIA support for Voipac PXA270 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-10pcmcia: move all pcmcia_resource_ops providers into one moduleDominik Brodowski1-1/+1
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-03pcmcia: disable pcmcia ioctl for !ARM, prepare for removalDominik Brodowski1-4/+10
The PCMCIA ioctl -- deprecated for years -- suffers from insufficient locking. As it already has been deprecated for years, with its removal long overdue, limit it to !SMP and !PREEMPT. Furthermore, the last legitimate use of the ioctl to be reported relates to the ARM architecture in 2008.[1] Attempts to resolve this issue turned out unsuccessful so far.[2] Other usages have only been reported as hear-say. If there are any legitiate and necessary use-cases remaining, please speak out before the end of the grace period until 2.6.3{5,6}(-rc1). [1] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005440.html see also: http://lkml.org/lkml/2008/2/27/291 [2] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005450.html http://lists.infradead.org/pipermail/linux-pcmcia/2010-January/006740.html see also: http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005453.html CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: Robert P. J. Day <rpjday@crashcourse.ca> CC: Jaswinder Singh Rajput <jaswinder@kernel.org> CC: linux-kernel@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-28Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-0/+21
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss1-0/+10
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss1-0/+11
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-17pcmcia: fix yenta dependency on PCCARD_NONSTATICMichal Marek1-3/+3
With CONFIG_PCMCIA=m and CONFIG_YENTA=y, we get drivers/built-in.o: In function `yenta_probe': yenta_socket.c:(.devinit.text+0x1e582): undefined reference to `pccard_nonstatic_ops' This is because select PCCARD_NONSTATIC if PCMCIA sets PCCARD_NONSTATIC = min(YENTA, PCMCIA). Change it to 'if PCMCIA!=n' to remove the upper limit. [linux@dominikbrodowski.net: propagate change to PCMICA_M8XX] Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-17pcmcia: do not use resource manager on !PCMCIADominik Brodowski1-2/+2
If only CardBus cards are used, but not PCMCIA cards, we do not need the extensive resource management functions provided for by rsrc_nonstatic.c (~240K). Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-17pcmcia: m8xx_pcmcia.c should use iodyn resource managerDominik Brodowski1-1/+0
The socket driver m8xx_pcmcia.c uses a static memory assignment, but io_offset is set to 0. Therefore, it seems proper to use the iodyn resource manager for this driver, as was previously the case (before commit 80128ff79d282cf71b1819dbca9b8dd47d8ed3e8). CC: Vitaly Bordug <vitb@kernel.crashing.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-01-24pcmcia: m32r uses static socket resourcesDominik Brodowski1-2/+0
m32r_cfc sets the socket capabilities to SS_CAP_STATIC_MAP and also sets io_offset != 0. This means no calls to &pccard_nonstatic_ops went through. Therfore, replace it with &pccard_static_ops which is exactly for this case. CC: Mamoru Sakugawa <sakugawa@linux-m32r.org> CC: Hirokazu Takata <takata@linux-m32r.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-3/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: CodingStyle fixes pcmcia: remove unused IRQ_FIRST_SHARED
2009-12-13[ARM] pxa/zeus: make Viper pcmcia support more generic to support ZeusMarc Zyngier1-1/+1
The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-08pcmcia: CodingStyle fixesDominik Brodowski1-3/+3
Fix several CodingStyle issues in drivers/pcmcia/ . checkpatch.pl no longer reports errors in the PCMCIA core. The remaining warnings mostly relate to wrong indent -- PCMCIA historically used 4 spaces --, to lines over 80 characters and to hundreds of typedefs. The cleanup of those will follow in the future. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-12-06Fix soc_common PCMCIA configurationRussell King1-1/+1
Jonathan Cameron reports that building PCMCIA as modules doesn't work: As module get a load of undefined symbols: ERROR: "soc_pcmcia_request_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_free_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_enable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_disable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined! ERROR: "soc_pcmcia_add_one" [drivers/pcmcia/pxa2xx_base.ko] undefined! ERROR: "soc_common_pcmcia_get_timing" [drivers/pcmcia/pxa2xx_base.ko] undefined! ERROR: "soc_pcmcia_remove_one" [drivers/pcmcia/pxa2xx_base.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This is because soc_common tries to be built-in, but it should be a module. Allow soc_common to be a module. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-09PCMCIA: soc_common: convert to a stand alone moduleRussell King - ARM Linux1-0/+6
Convert soc_common.c to be a stand alone module, rather than wrapping it up into the individual SoC specific base modules. In doing this, we need to add init/exit functions for soc_common to register/remove the cpufreq notifier. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: use dynamic debug in PCMCIA socket driversDominik Brodowski1-18/+18
Make use of the dynamic debug infrastructure in various PCMCIA socket drivers. By doing so, only the drivers relying on soc_common make use of CONFIG_PCMCIA_DEBUG. Therefore, update the Kconfig entry accordingly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-09-30MIPS: BCM63xx: Add PCMCIA & Cardbus support.Maxime Bizon1-0/+4
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-05[ARM] pxa/stargate2: add support for Compact Flash/PCMCIAJonathan Cameron1-1/+1
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-15[PCMCIA] e740 PCMCIA socket driver.Ian Molton1-1/+1
This patch adds the platform specific support needed to control the PCMCIA hardware on the Toshiba e740. Signed-off-by: Ian Molton <spyro@f2s.com>
2008-10-28sh: Kill off long-dead HD64465 cchip support.Paul Mundt1-4/+0
This code has been dead for many years. The last update it received was in 2003 in order to update it for the driver model changes, though it had already been in disarray and unused before that point. The only boards that ever used this chip have not had users in many years either, so it is finally safe to just kill it off and move on with life. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-07Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-armRussell King1-1/+2
Merge branch 'pxa-viper' into pxa-machines Conflicts: arch/arm/mach-pxa/Makefile drivers/pcmcia/Kconfig drivers/pcmcia/Makefile
2008-10-07[ARM] 5294/1: Trizeps4 PCMCIA supportJürgen Schindele1-1/+1
Support for Trizeps4 SOM PCMCIA with ConXS or other baseboards. with double GPIO-free fixed (sorry!) replaces 5279/1 Signed-off-by: Jurgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09Add support for the Arcom/Eurotech Viper SBC CompactFlash card slotMarc Zyngier1-1/+1
The Arcom/Eurotech Viper needs some extra care to run. On this board, the PC104 connector is actually wired to the second PCMCIA slot. Therefore, this second socket needs to be enabled, despite not being managed by the PCMCIA code. I'd rather have the MECR setup in the platform support code so I could, for example, use the PC104 bus without having the PCMCIA module loaded. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-07-24Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+2
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-10[ARM] 5154/1: PalmTX PCMCIAMarek Vašut1-1/+2
This patch adds PCMCIA support for PalmTX handheld computer. There is one chip hard-soldered to slot0, another slot is not in use and not accessible. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-24pcmcia: add support CompactFlash PCMCIA support for Blackfin.Michael Hennerich1-0/+7
A new host driver to add CompactFlash PCMCIA support for Blackfin. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-04-29ARM: always select HAVE_IDEAdrian Bunk1-1/+0
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the availability of an asm/ide.h It turns out this was done for ARM, and we can simply always select HAVE_IDE on ARM instead of manually tracking which platforms might possible have an IDE controller directly or indirectly. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-21[ARM] pxa: fix 0e623941bec7e80c97b076d346327b31ae17d84aRussell King1-1/+1
Place the dependency against the correct config symbol. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 23:52:46 +0300