summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2009-06-22Merge branch 'linux-next' of ↵Linus Torvalds40-2116/+2861
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-20PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded writeHidetoshi Seto1-4/+1
Use msix_mask_irq() instead of direct use of writel, so as not to clear preserved bits in the Vector Control register [31:1]. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-20PCI: Fix the NIU MSI-X problem in a better wayMatthew Wilcox1-18/+28
The previous MSI-X fix (8d181018532dd709ec1f789e374cda92d7b01ce1) had three bugs. First, it didn't move the write that disabled the vector. This led to writing garbage to the MSI-X vector (spotted by Michael Ellerman). It didn't fix the PCI resume case, and it had a race window where the device could generate an interrupt before the MSI-X registers were programmed (leading to a DMA to random addresses). Fortunately, the MSI-X capability has a bit to mask all the vectors. By setting this bit instead of clearing the enable bit, we can ensure the device will not generate spurious interrupts. Since the capability is now enabled, the NIU device will not have a problem with the reads and writes to the MSI-X registers being in the original order in the code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: remove get_root_port_linkKenji Kaneshige1-13/+11
By having a pointer to the root port link, we can remove loops in get_root_port_link() to search the root port link. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup pcie_aspm_sanity_checkKenji Kaneshige1-12/+9
Minor cleanup for pcie_aspm_sanity_check(). Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: remove has_switch fieldKenji Kaneshige1-4/+1
We don't need the 'has_switch' field in the struct pcie_link_state. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup calc_Lx_latencyKenji Kaneshige1-39/+34
Cleanup for calc_L0S_latency() and calc_L1_latency(). - Separate exit latency and acceptable latency calculation. - Some minor cleanups. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup pcie_aspm_get_cap_deviceKenji Kaneshige1-5/+4
Minor cleanup for pcie_aspm_get_cap_device(). Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup clkpm checksKenji Kaneshige1-14/+20
In the current ASPM implementation, callers of pcie_set_clock_pm() check Clock PM capability of the link or current Clock PM state of the link. This check should be done in pcie_set_clock_pm() itself. This patch moves those checks into pcie_set_clock_pm(). It also introduces pcie_set_clkpm_nocheck() that is equivalent to old pcie_set_clock_pm(), for the caller who wants to change Clocl PM state regardless of the Clock PM capability or current Clock PM state. In addition, this patch changes the function name from pcie_set_clock_pm() to pcie_set_clkpm() for consistency. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup __pcie_aspm_check_state_oneKenji Kaneshige1-42/+25
Clean up and simplify __pcie_aspm_check_state_one(). Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup initializationKenji Kaneshige1-67/+75
Clean up ASPM initialization by refactoring some functionality, renaming functions, and moving things around. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup change input argument of aspm functionsKenji Kaneshige1-199/+173
In the current ASPM implementation, there are many functions that take a pointer to struct pci_dev corresponding to the upstream component of the link as a parameter. But, since those functions handle PCI express link state, a pointer to struct pcie_link_state is more suitable than a pointer to struct pci_dev. Changing a parameter to a pointer to struct pcie_link_state makes ASPM code much simpler and easier to read. This patch also contains some minor cleanups. This patch doesn't have any functional change. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup misc in struct pcie_link_stateKenji Kaneshige1-9/+9
Cleanup for some fields in pcie_link_state. - Add comments. - make "downstream_has_switch" field 1-bit. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup clkpm state in struct pcie_link_stateKenji Kaneshige1-19/+18
The "clk_pm_capable", "clk_pm_enable" and "bios_clk_state" fields in the struct pcie_link_state only take 1-bit value. So those fields don't need to be defined as unsigned int. This patch makes those fields 1-bit, and cleans up some related code. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup latency field in struct pcie_link_stateKenji Kaneshige1-38/+28
Clean up latency related data structures for ASPM. - Introduce struct acpi_latency for exit latency and acceptable latency management. With this change, struct endpoint_state is no longer needed. - We don't need to hold both upstream latency and downstream latency in the current implementation. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: cleanup aspm state field in struct pcie_link_stateKenji Kaneshige1-33/+38
The "support_state", "enabled_state" and "bios_aspm_state" fields in the struct pcie_link_state take 2-bit value. So those fields don't need to be defined as unsigned int. This patch makes those fields 2-bit, and cleans up some related code. Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI ASPM: fix typo in struct pcie_link_stateKenji Kaneshige1-7/+7
Fix a typo in struct pcie_link_state. The "sibiling" field in the struct pcie_link_state should be "sibling". Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI: drivers/pci/slot.c should depend on CONFIG_SYSFSAlex Chiang2-2/+3
There is no way to interact with a physical PCI slot without sysfs, so encode the dependency and prevent this build error: drivers/pci/slot.c: In function 'pci_hp_create_module_link': drivers/pci/slot.c:327: error: 'module_kset' undeclared This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too, but we cannot (yet) because the PCI core merrily assumes the existence of sysfs: drivers/built-in.o: In function `pci_bus_add_device': drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files' drivers/built-in.o: In function `pci_stop_dev': drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files' So do the minimal bit for now and figure out how to untangle it later. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fix-suggested-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-19PCI: remove redundant __msi_set_enable()Matthew Wilcox1-20/+18
We have the 'pos' of the MSI capability at all locations which call msi_set_enable(), so pass it to msi_set_enable() instead of making it find the capability every time. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-18Fix pci_claim_resourceMatthew Wilcox1-2/+2
Instead of starting from the iomem or ioport roots, start from the parent bus' resources. This fixes a bug where child resources would appear above their parents resources if they had the same size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17PCI PM: consistently use type bool for wake enable variableFrans Pop1-1/+1
Other functions use type bool, so use that for pci_enable_wake as well. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: remove invalid comment of msi_mask_irq()Kenji Kaneshige1-3/+0
Remove invalid comment of msi_mask_irq(). Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI PM: Fix handling of devices without PM support by pci_target_state()Rafael J. Wysocki1-3/+2
If a PCI device is not power-manageable either by the platform, or with the help of the native PCI PM interface, pci_target_state() will return either PCI_D3hot, or PCI_POWER_ERROR for it, depending on whether or not the device is configured to wake up the system. Alas, none of these return values is correct, because each of them causes pci_prepare_to_sleep() to return error code, although it should complete successfully in such a case. Fix this problem by making pci_target_state() always return PCI_D0 for devices that cannot be power managed. Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: support Secondary Bus ResetYu Zhao1-0/+31
PCI-to-PCI Bridge 1.2 specifies that the Secondary Bus Reset bit can force the assertion of RST# on the secondary interface, which can be used to reset all devices including subordinates under this bus. This can be used to reset a function if this function is the only device under this bus. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: support PM D0hot->D3 transition resetYu Zhao1-0/+34
PCI PM 1.2 specifies that the device will perform an internal reset upon transitioning from D3hot to D0 when the NO_SOFT_RESET bit is clear. This method can be used to reset a function if neither PCIe FLR nor PCI AF FLR are supported. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: cleanup Function Level ResetYu Zhao2-84/+86
This patch enhances the FLR functions: 1) remove disable_irq() so the shared IRQ won't be disabled. 2) replace the 1s wait with 100, 200 and 400ms wait intervals for the Pending Transaction. 3) replace mdelay() with msleep(). 4) add might_sleep(). 5) lock the device to prevent PM suspend from accessing the CSRs during the reset. 6) coding style fixes. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI AER: software error injectionHuang Ying4-0/+494
Debugging PCIE AER code can be very difficult because it is hard to trigger various real hardware errors. This patch provide a software based error injection tool, which can fake various PCIE errors with a user space helper tool named "aer-inject". Which can be gotten from: http://www.kernel.org/pub/linux/kernel/people/yhuang/ The patch fakes AER error by faking some PCIE AER related registers and an AER interrupt for specified the PCIE device. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI AER: multiple error supportZhang, Yanmin2-23/+69
When a root port receives the same errors more than once before the kernel process them, the Multiple Error Messages Received flags are set by hardware. Because the root port could only save one kind of correctable error source id and another uncorrectable error source id at the same time, the second message sender id is lost if the 2 messages are sent from 2 different devices. This patch makes the kernel search all devices under the root port when multiple messages are received. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI AER: support invalid error source IDsZhang, Yanmin2-60/+118
When the bus id part of error source id is equal to 0 or nosourceid=1, make the kernel probe the AER status registers of all devices under the root port to find the initial error reporter. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI AER: support Multiple Error Received and no error source idZhang, Yanmin2-16/+25
Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI hotplug: remove redundant .owner initializationsKenji Kaneshige9-9/+0
The "owner" field in struct hotplug_slot_ops is initialized by PCI hotplug core. So each hotplug controller driver doesn't need to initialize it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI hotplug: create symlink to hotplug driver moduleKenji Kaneshige2-7/+55
Create symbolic link to hotplug driver module in the PCI slot directory (/sys/bus/pci/slots/<SLOT#>). In the past, we need to load hotplug drivers one by one to identify the hotplug driver that handles the slot, and it was very inconvenient especially for trouble shooting. With this change, we can easily identify the hotplug driver. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI hotplug: fix return value of has_foo() functionsKenji Kaneshige1-64/+68
Current has_foo() functions in pci_hotplug_core.c returns 0 if the "foo" property is true. It would cause misunderstanding. In addition, the error code of those functions is never checked, so this patch changes those functions' error code to 'bool' and return true if the property "foo" is true. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: Remove untested Electromechanical Interlock (EMI) support in pciehp.Kenji Kaneshige3-144/+1
The EMI support in pciehp is obviously broken. It is implemented using struct hotplug_slot_attribute, but sysfs_ops for pci_slot_ktype is NOT for struct hotplug_slot_attribute, but for struct pci_slot_attribute. This bug had been there for a long time, maybe it was introduced when PCI slot framework was introduced. The reason why this bug didn't cause any problem is maybe the EMI support is not tested at all because of lack of test environment. As described above, the EMI support in pciehp seems not to be tested at all. So this patch removes EMI support from pciehp, instead of fixing the bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: PCIE AER: export aer_irqHuang Ying2-1/+4
This is used by PCIE AER error injection to fake an PCI AER interrupt. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: Add pci_bus_set_opsHuang Ying1-0/+19
pci_bus_set_ops changes pci_ops associated with a pci_bus. This can be used by debug tools such as PCIE AER error injection to fake some PCI configuration registers. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in pci_common_swizzle()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in pci_common_swizzle() for checking if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in pci_get_interrupt_pin()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in pci_get_interrupt_pin() for checking if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in pci_read_bridge_bases()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in pci_read_bridge_bases() to check if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in pci_find_upstream_pcie_bridge()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in pci_find_upstream_pcie_bridge() to check if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI quirk: HP hides SMBus controller in Compaq nx9500 laptopsMichal Miroslaw1-0/+1
I found no references to SMBus in ACPI DSDT disassembly on my laptop so this should be safe. Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI quirk: unhide 'Overflow' device on i828{6,7}5P/PE chipsetsMichal Miroslaw1-0/+22
Some BIOSes hide 'overflow' device (dev #6) for i82875P/PE chipsets. The same happens for i82865P/PE. Add a quirk to enable this device. This allows i82875 EDAC driver to bind to chipset's dev #6 and not dev #0 as the latter is used by AGP driver. On my laptop (i82865P based) ACPI code is disabling this device again in \_SB.PCI0._CRS method (called at least at PNP init time). This can be easily worked around by patching DSDT. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Acked-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds1-0/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (143 commits) USB: xhci depends on PCI. USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. USB: xhci: Respect critical sections. USB: xHCI: Fix interrupt moderation. USB: xhci: Remove packed attribute from structures. usb; xhci: Fix TRB offset calculations. USB: xhci: replace if-elseif-else with switch-case USB: xhci: Make xhci-mem.c include linux/dmapool.h USB: xhci: drop spinlock in xhci_urb_enqueue() error path. USB: Change names of SuperSpeed ep companion descriptor structs. USB: xhci: Avoid compiler reordering in Link TRB giveback. USB: xhci: Clean up xhci_irq() function. USB: xhci: Avoid global namespace pollution. USB: xhci: Fix Link TRB handoff bit twiddling. USB: xhci: Fix register write order. USB: xhci: fix some compiler warnings in xhci.h USB: xhci: fix lots of compiler warnings. USB: xhci: use xhci_handle_event instead of handle_event USB: xhci: URB cancellation support. USB: xhci: Scatter gather list support for bulk transfers. ...
2009-06-16PCI: add power-state name stringsAlan Stern1-0/+5
This patch (as1235) adds an array of PCI power-state names, together with a simple inline accessor routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-16PCIE: remove driver_data direct access of struct deviceGreg Kroah-Hartman1-1/+1
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: linux-pci@vger.kernel.org Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-0/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits) pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US ipv4: Fix fib_trie rebalancing Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver Bluetooth: Fix Kconfig issue with RFKILL integration PIM-SM: namespace changes ipv4: update ARPD help text net: use a deferred timer in rt_check_expire ieee802154: fix kconfig bool/tristate muckup bonding: initialization rework bonding: use is_zero_ether_addr bonding: network device names are case sensative bonding: elminate bad refcount code bonding: fix style issues bonding: fix destructor bonding: remove bonding read/write semaphore bonding: initialize before registration bonding: bond_create always called with default parameters x_tables: Convert printk to pr_err netfilter: conntrack: optional reliable conntrack event delivery list_nulls: add hlist_nulls_add_head and hlist_nulls_del ...
2009-06-15Merge branch 'merge' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits) powerpc: Fix bug in move of altivec code to vector.S powerpc: Add support for swiotlb on 32-bit powerpc/spufs: Remove unused error path powerpc: Fix warning when printing a resource_size_t powerpc/xmon: Remove unused variable in xmon.c powerpc/pseries: Fix warnings when printing resource_size_t powerpc: Shield code specific to 64-bit server processors powerpc: Separate PACA fields for server CPUs powerpc: Split exception handling out of head_64.S powerpc: Introduce CONFIG_PPC_BOOK3S powerpc: Move VMX and VSX asm code to vector.S powerpc: Set init_bootmem_done on NUMA platforms as well powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock powerpc/mm: Fix some SMP issues with MMU context handling powerpc: Add PTRACE_SINGLEBLOCK support fbdev: Add PLB support and cleanup DCR in xilinxfb driver. powerpc/virtex: Add ml510 reference design device tree powerpc/virtex: Add Xilinx ML510 reference design support powerpc/virtex: refactor intc driver and add support for i8259 cascading powerpc/virtex: Add support for Xilinx PCI host bridge ...
2009-06-15Merge branch 'master' of ↵David S. Miller9-100/+94
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-12trivial: pci hotplug: adding __init/__exit macros to sgi_hotplugPeter Huewe1-2/+2
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions from drivers/pci/hotplug/sgi_hotplug.c linux version 2.6.30-rc8 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12Merge commit 'origin/master' into nextBenjamin Herrenschmidt7-97/+90
Manual merge of: arch/powerpc/kernel/asm-offsets.c
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 05:26:39 +0300