summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessaryDexuan Cui1-0/+4
commit 340d455699400f2c2c0f9b3f703ade3085cdb501 upstream. When we hot-remove a device, usually the host sends us a PCI_EJECT message, and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. When we execute the quick hot-add/hot-remove test, the host may not send us the PCI_EJECT message if the guest has not fully finished the initialization by sending the PCI_RESOURCES_ASSIGNED* message to the host, so it's potentially unsafe to only depend on the pci_destroy_slot() in hv_eject_device_work() because the code path create_root_hv_pci_bus() -> hv_pci_assign_slots() is not called in this case. Note: in this case, the host still sends the guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. In the quick hot-add/hot-remove test, we can have such a race before the code path pci_devices_present_work() -> new_pcichild_device() adds the new device into the hbus->children list, we may have already received the PCI_EJECT message, and since the tasklet handler hv_pci_onchannelcallback() may fail to find the "hpdev" by calling get_pcichild_wslot(hbus, dev_message->wslot.slot) hv_pci_eject_device() is not called; Later, by continuing execution create_root_hv_pci_bus() -> hv_pci_assign_slots() creates the slot and the PCI_BUS_RELATIONS message with bus_rel->device_count == 0 removes the device from hbus->children, and we end up being unable to remove the slot in hv_pci_remove() -> hv_pci_remove_slots() Remove the slot in pci_devices_present_work() when the device is removed to address this race. pci_devices_present_work() and hv_eject_device_work() run in the singled-threaded hbus->wq, so there is not a double-remove issue for the slot. We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback() to the workqueue, because we need the hv_pci_onchannelcallback() synchronously call hv_pci_eject_device() to poll the channel ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue fixed in commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: rewritten commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16PCI: hv: Add hv_pci_remove_slots() when we unload the driverDexuan Cui1-0/+16
commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream. When we unload the pci-hyperv host controller driver, the host does not send us a PCI_EJECT message. In this case we also need to make sure the sysfs PCI slot directory is removed, otherwise a command on a slot file eg: "cat /sys/bus/pci/slots/2/address" will trigger a "BUG: unable to handle kernel paging request" and, if we unload/reload the driver several times we would end up with stale slot entries in PCI slot directories in /sys/bus/pci/slots/ root@localhost:~# ls -rtl /sys/bus/pci/slots/ total 0 drwxr-xr-x 2 root root 0 Feb 7 10:49 2 drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1 drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2 Add the missing code to remove the PCI slot and fix the current behaviour. Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: reformatted the log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16PCI: hv: Fix a memory leak in hv_eject_device_work()Dexuan Cui1-0/+3
commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream. When a device is created in new_pcichild_device(), hpdev->refs is set to 2 (i.e. the initial value of 1 plus the get_pcichild()). When we hot remove the device from the host, in a Linux VM we first call hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and then schedules a work of hv_eject_device_work(), so hpdev->refs becomes 3 (let's ignore the paired get/put_pcichild() in other places). But in hv_eject_device_work(), currently we only call put_pcichild() twice, meaning the 'hpdev' struct can't be freed in put_pcichild(). Add one put_pcichild() to fix the memory leak. The device can also be removed when we run "rmmod pci-hyperv". On this path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()), hpdev->refs is 2, and we do correctly call put_pcichild() twice in pci_devices_present_work(). Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: commit log rework] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20PCI/ASPM: Save LTR Capability for suspend/resumeBjorn Helgaas1-2/+51
[ Upstream commit dbbfadf2319005cf528b0f15f12a05d4e4644303 ] Latency Tolerance Reporting (LTR) allows Endpoints and Switch Upstream Ports to report their latency requirements to upstream components. If ASPM L1 PM substates are enabled, the LTR information helps determine when a Link enters L1.2 [1]. Software must set the maximum latency values in the LTR Capability based on characteristics of the platform, then set LTR Mechanism Enable in the Device Control 2 register in the PCIe Capability. The device can then use LTR to report its latency tolerance. If the device reports a maximum latency value of zero, that means the device requires the highest possible performance and the ASPM L1.2 substate is effectively disabled. We put devices in D3 for suspend, and we assume their internal state is lost. On resume, previously we did not restore the LTR Capability, but we did restore the LTR Mechanism Enable bit, so devices would request the highest possible performance and ASPM L1.2 wouldn't be used. [1] PCIe r4.0, sec 5.5.1 Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe portsMika Westerberg1-0/+22
[ Upstream commit 85b0cae89d5266e6a7abb2e83c6f716326fc494c ] Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is connected to an Alpine Ridge Thunderbolt controller. This port has slot implemented bit set in the config space but other than that it is not hotplug capable in the sense we are expecting in Linux (it has dev->is_hotplug_bridge set to 0): 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 Memory behind bridge: 78000000-8fffffff [size=384M] Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M] ... Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 ... SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #8, PowerLimit 25.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState+ This system is using ACPI based hotplug to notify the OS that it needs to rescan the PCI bus (ACPI hotplug). If there is nothing connected in any of the Thunderbolt ports the root port will not have any runtime PM active children and is thus automatically runtime suspended pretty soon after boot by PCI PM core. Now, when a device is connected the BIOS SMI handler responsible for enumerating newly added devices is not able to find anything because the port is in D3. Prevent this from happening by blacklisting PCI power management of this particular Gigabyte system. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202031 Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-17PCI: pciehp: Ignore Link State Changes after powering off a slotSergey Miroshnichenko1-0/+4
commit 3943af9d01e94330d0cfac6fccdbc829aad50c92 upstream. During a safe hot remove, the OS powers off the slot, which may cause a Data Link Layer State Changed event. The slot has already been set to OFF_STATE, so that event results in re-enabling the device, making it impossible to safely remove it. Clear out the Presence Detect Changed and Data Link Layer State Changed events when the disabled slot has settled down. It is still possible to re-enable the device if it remains in the slot after pressing the Attention Button by pressing it again. Fixes the problem that Micah reported below: an NVMe drive power button may not actually turn off the drive. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203237 Reported-by: Micah Parrish <micah.parrish@hpe.com> Tested-by: Micah Parrish <micah.parrish@hpe.com> Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com> [bhelgaas: changelog, add bugzilla URL] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controllerAndre Przywara1-0/+2
commit 9cde402a59770a0669d895399c13407f63d7d209 upstream. There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already. Add the PCI vendor/device ID to the list of chips which need the workaround. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-05PCI: pciehp: Assign ctrl->slot_ctrl before writing it to hardwareMika Westerberg1-1/+1
[ Upstream commit 25bd879ec16ad3b83a5b1c3f16faa55e696bfccb ] Shameerali reported that running v4.20-rc1 as QEMU guest, the PCIe hotplug port times out during boot: pciehp 0000:00:01.0:pcie004: Timeout on hotplug command 0x03f1 (issued 1016 msec ago) pciehp 0000:00:01.0:pcie004: Timeout on hotplug command 0x03f1 (issued 1024 msec ago) pciehp 0000:00:01.0:pcie004: Failed to check link status pciehp 0000:00:01.0:pcie004: Timeout on hotplug command 0x02f1 (issued 2520 msec ago) The issue was bisected down to commit 720d6a671a6e ("PCI: pciehp: Do not handle events if interrupts are masked") and was further analyzed by the reporter to be caused by the fact that pciehp first updates the hardware and only then cache the ctrl->slot_ctrl in pcie_do_write_cmd(). If the interrupt happens before we cache the value, pciehp_isr() reads value 0 and decides that the interrupt was not meant for it causing the above timeout to trigger. Fix by moving ctrl->slot_ctrl assignment to happen before it is written to the hardware. Fixes: 720d6a671a6e ("PCI: pciehp: Do not handle events if interrupts are masked") Link: https://lore.kernel.org/linux-pci/5FC3163CFD30C246ABAA99954A238FA8387DD344@FRAEML521-MBX.china.huawei.com Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05PCI/PME: Fix hotplug/sysfs remove deadlock in pcie_pme_remove()Rafael J. Wysocki1-7/+15
[ Upstream commit 95c80bc6952b6a5badc7b702d23e5bf14d251e7c ] Dongdong reported a deadlock triggered by a hotplug event during a sysfs "remove" operation: pciehp 0000:00:0c.0:pcie004: Slot(0-1): Link Up # echo 1 > 0000:00:0c.0/remove PME and hotplug share an MSI/MSI-X vector. The sysfs "remove" side is: remove_store pci_stop_and_remove_bus_device_locked pci_lock_rescan_remove pci_stop_and_remove_bus_device ... pcie_pme_remove pcie_pme_suspend synchronize_irq # wait for hotplug IRQ handler pci_unlock_rescan_remove The hotplug side is: pciehp_ist pciehp_handle_presence_or_link_change pciehp_configure_device pci_lock_rescan_remove # wait for pci_unlock_rescan_remove() INFO: task bash:10913 blocked for more than 120 seconds. # ps -ax |grep D PID TTY STAT TIME COMMAND 10913 ttyAMA0 Ds+ 0:00 -bash 14022 ? D 0:00 [irq/745-pciehp] # cat /proc/14022/stack __switch_to+0x94/0xd8 pci_lock_rescan_remove+0x20/0x28 pciehp_configure_device+0x30/0x140 pciehp_handle_presence_or_link_change+0x324/0x458 pciehp_ist+0x1dc/0x1e0 # cat /proc/10913/stack __switch_to+0x94/0xd8 synchronize_irq+0x8c/0xc0 pcie_pme_suspend+0xa4/0x118 pcie_pme_remove+0x20/0x40 pcie_port_remove_service+0x3c/0x58 ... pcie_port_device_remove+0x2c/0x48 pcie_portdrv_remove+0x68/0x78 pci_device_remove+0x48/0x120 ... pci_stop_bus_device+0x84/0xc0 pci_stop_and_remove_bus_device_locked+0x24/0x40 remove_store+0xa4/0xb8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 It is incorrect to call pcie_pme_suspend() from pcie_pme_remove() for two reasons. First, pcie_pme_suspend() calls synchronize_irq(), which will wait for the native hotplug interrupt handler as well as for the PME one, because they share one IRQ (as per the spec). That may deadlock if hotplug is signaled while pcie_pme_remove() is running and the latter calls pci_lock_rescan_remove() before the former. Second, if pcie_pme_suspend() figures out that wakeup needs to be enabled for the port, it will return without disabling the interrupt as expected by pcie_pme_remove() which was overlooked by commit c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume"). To fix that, rework pcie_pme_remove() to disable the PME interrupt, clear its status and prevent the PME worker function from re-enabling it before calling free_irq() on it, which should be sufficient. Fixes: c7b5a4e6e8fb ("PCI / PM: Fix native PME handling during system suspend/resume") Link: https://lore.kernel.org/linux-pci/c7697e7c-e1af-13e4-8491-0a3996e6ab5d@huawei.com Reported-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bhelgaas: add URL and deadlock details from Dongdong] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05PCI: mediatek: Fix memory mapped IO range size computationHonghui Zhang1-3/+2
[ Upstream commit c61df57343bf05743f8abbb31eec9a6f05820dd1 ] Mediatek's HW assigns a MMIO address range (typically starts from 0x20000000 to 0x2fffffff for both mt2712 and mt7622) for PCI usage. This MMIO address space represents the address space that can be allocated to PCI devices through Base Address Registers. Even though the full MMIO address range is available to be allocated, it should be enabled by the PCIE_AHB_TRANS_BASE register in the host controller and the size that is enabled is determined by AHB2PCIE_SIZE bits in this register. Owing to a bug in the MMIO window size computation, current code does not enable the full size of the available MMIO address range in the PCI host controller; if the PCI devices BARs requested size exceeds the size enabled through the PCIE_AHB_TRANS_BASE register the requests targeting the disabled address address space will be blocked by the root complex causing a system error. Existing code has never run into a system error in production because even half of the enabled MMIO range (128MB) is big enough for typical devices BAR requests (4MB) but the full MMIO address range should be enabled regardless. Fix the MMIO window size computation by using resource_size(mem) instead of mem->end - mem->start. Since the MMIO window size for both MT2712 and MT7622 is 0x10000000, this change will update the parameter passed to fls() from 0xfffffff to 0x10000000 and calculate the whole memory mapped IO range size correctly. Detected through coccinelle semantic patch (and related warning): scripts/coccinelle/api/resource_size.cocci: pcie-mediatek.c:720:13-16: WARNING: Suspicious code. resource_size is maybe missing with mem Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flagsThomas Petazzoni4-4/+15
commit 33776d059630e5045ea9ccf756c74de8f9cc86de upstream. Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI: pci-bridge-emul: Create per-bridge copy of register behaviorThomas Petazzoni2-28/+60
commit 59f81c35e0df840f7112cb296dde48df84a67c79 upstream. The behavior of the different registers of the PCI-to-PCI bridge is currently encoded in two global arrays, shared by all instances of PCI-to-PCI bridge emulation. However, we will need to tweak the behavior on a per-bridge basis, to accommodate for different capabilities of the platforms where this code is used. In preparation for this, create a per-bridge copy of the register behavior arrays, so that they can later be tweaked on a per-bridge basis. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI: pciehp: Disable Data Link Layer State Changed event on suspendMika Westerberg1-2/+15
commit bbe54ea5330d828cc396d451c0e1e5c3f9764c1e upstream. Commit 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") tried to solve an issue where the hierarchy immediately wakes up when it is transitioned into D3cold. However, it turns out to prevent PME propagation on some systems that do not support D3cold. I looked more closely at what might cause the immediate wakeup. It happens when the ACPI power resource of the root port is turned off. The AML code associated with the _OFF() method of the ACPI power resource starts a PCIe L2/L3 Ready transition and waits for it to complete. Right after the L2/L3 Ready transition is started the root port receives a PME from the downstream port. The simplest hierarchy where this happens looks like this: 00:1d.0 PCIe Root Port ^ | v 05:00.0 PCIe switch #1 upstream port 06:01.0 PCIe switch #1 downstream hotplug port ^ | v 08:00.0 PCIe switch #2 upstream port It seems that the PCIe link between the two switches, before PME_Turn_Off/PME_TO_Ack is complete for the whole hierarchy, goes inactive and triggers PME towards the root port bringing it back to D0. The L2/L3 Ready sequence is described in PCIe r4.0 spec sections 5.2 and 5.3.3 but unfortunately they do not state what happens if DLLSCE is enabled during the sequence. Disabling Data Link Layer State Changed event (DLLSCE) seems to prevent the issue and still allows the downstream hotplug port to notice when a device is plugged/unplugged. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202593 Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.20+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI: dwc: skip MSI init if MSIs have been explicitly disabledLucas Stach1-1/+1
commit 3afc8299f39a27b60e1519a28e18878ce878e7dd upstream. Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI: qcom: Don't deassert reset GPIO during probeBjorn Andersson1-1/+1
commit 02b485e31d98265189b91f3e69c43df2ed50610c upstream. Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI/DPC: Fix print AER status in DPC event handlingDongdong Liu1-1/+26
commit 9f08a5d896ce43380314c34ed3f264c8e6075b80 upstream. Previously dpc_handler() called aer_get_device_error_info() without initializing info->severity, so aer_get_device_error_info() relied on uninitialized data. Add dpc_get_aer_uncorrect_severity() to read the port's AER status, mask, and severity registers and set info->severity. Also, clear the port's AER fatal error status bits. Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23PCI/ASPM: Use LTR if already enabled by platformBjorn Helgaas1-13/+23
commit 10ecc818ea7319b5d0d2b4e1aa6a77323e776f76 upstream. RussianNeuroMancer reported that the Intel 7265 wifi on a Dell Venue 11 Pro 7140 table stopped working after wakeup from suspend and bisected the problem to 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"). David Ward reported the same problem on a Dell Latitude 7350. After af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before using it"), we don't enable LTR unless the platform has granted LTR control to us. In addition, we don't notice if the platform had already enabled LTR itself. After 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"), we avoid using LTR if we don't think the path to the device has LTR enabled. The combination means that if the platform itself enables LTR but declines to give the OS control over LTR, we unnecessarily avoided using ASPM L1.2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469 Fixes: 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR") Fixes: af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before using it") Reported-by: RussianNeuroMancer <russianneuromancer@ya.ru> Reported-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.18+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-14Revert "PCI/PME: Implement runtime PM callbacks"Mika Westerberg1-27/+0
commit c528f7bd362b097eeeafa6fbbeccd9750b79c7ba upstream. This reverts commit 0e157e52860441cb26051f131dd0b5ae3187a07b. Heiner reported that the commit in question prevents his network adapter from triggering PME and waking up when network cable is plugged. The commit tried to prevent root port waking up from D3cold immediately but looks like disabing root port PME interrupt is not the right way to fix that issue so revert it now. The patch following proposes an alternative solution to that issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=202103 Fixes: 0e157e528604 ("PCI/PME: Implement runtime PM callbacks") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.20+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-09Merge tag 'pci-v5.0-fixes-4' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) that breaks PCIe on I.MX SoCs (Thinh Nguyen)" * tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)
2019-02-07PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)Thinh Nguyen1-2/+3
There are at least four different parts with the same Vendor and Device ID ([16c3:abcd]): 1) Synopsys HAPS USB3 controller 2) Synopsys PCIe Root Port in Freescale/NXP i.MX6Q (reported by Lucas) 3) Synopsys PCIe Root Port in Freescale/NXP i.MX6QP (reported by Lukas) 4) Synopsys PCIe Root Port in Freescale/NXP i.MX7D (reported by Trent) The HAPS USB3 controller has a Class Code of PCI_CLASS_SERIAL_USB_XHCI, which means the XHCI driver would normally claim it. Previously, quirk_synopsys_haps() changed the Class Code of all [16c3:abcd] devices, including the Root Ports, to PCI_CLASS_SERIAL_USB_DEVICE to prevent the XHCI driver from claiming them so dwc3-haps can claim them instead. Changing the Class Code of the Root Ports prevents the PCI core from handling them as bridges, so devices below them don't work. Restrict the quirk so it only changes the Class Code for devices that start with the PCI_CLASS_SERIAL_USB_XHCI Class Code, leaving the Root Ports alone. Fixes: 03e6742584af ("PCI: Override Synopsys USB 3.x HAPS device class") Reported-by: Lukas F. Hartmann <lukas@mntmn.com> Reported-by: Trent Piepho <tpiepho@impinj.com> Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-02-01Merge tag 'pci-v5.0-fixes-3' of ↵Linus Torvalds2-20/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain
2019-02-01Revert "PCI: armada8k: Add support for gpio controlled reset signal"Baruch Siach1-16/+0
Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal"). That commit breaks boot on Macchiatobin board when a Mellanox NIC is present in the PCIe slot. It turns out that full reset cycle requires first comphy serdes initialization. Reset signal toggle without comphy initialization makes access to PCI configuration registers stall indefinitely. U-Boot toggles the Macchiatobin PCIe reset line already at boot, after initializing the comphy serdes. So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") enables PCIe on platforms that U-Boot does not touch the reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the Macchiatobin board. Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") entirely to fix the Macchiatobin regression. Reported-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-01PCI: imx: Fix checking pd_pcie_phy device link additionLeonard Crestez1-4/+4
The check on the device_link_add() return value is wrong; this leads to erroneous code execution, so fix it. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-01-31PCI: imx: Fix probe failure without power domainLeonard Crestez1-0/+3
On chips without a separate power domain for PCI (such as 6q/6qp) the imx6_pcie_attach_pd() function incorrectly returns an error. Fix by returning 0 if dev_pm_domain_attach_by_name() does not find anything. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Reported-by: Lukas F.Hartmann <lukas@mntmn.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-01-18Merge tag 'pci-v5.0-fixes-2' of ↵Linus Torvalds3-24/+23
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas:: - Fix PCI kconfig menu organization (Rob Herring) - Fix pci_alloc_irq_vectors_affinity() error return to allow "reduce and retry" for drivers using IRQ sets (Ming Lei) - Fix "pci=disable_acs_redir" initdata use-after-free problem (Logan Gunthorpe) * tag 'pci-v5.0-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity() PCI: Fix PCI kconfig menu organization
2019-01-17PCI: Fix __initdata issue with "pci=disable_acs_redir" parameterLogan Gunthorpe1-1/+2
The disable_acs_redir parameter stores a pointer to the string passed to pci_setup(). However, the string passed to PCI setup is actually a temporary copy allocated in static __initdata memory. After init, once the memory is freed, it is no longer valid to reference this pointer. This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") caused pci_disable_acs_redir() to be called during shutdown which manifested as an unable to handle kernel paging request at: RIP: 0010:pci_enable_acs+0x3f/0x1e0 Call Trace: pci_restore_state.part.44+0x159/0x3c0 pci_restore_standard_config+0x33/0x40 pci_pm_runtime_resume+0x2b/0xd0 ? pci_restore_standard_config+0x40/0x40 __rpm_callback+0xbc/0x1b0 rpm_callback+0x1f/0x70 ? pci_restore_standard_config+0x40/0x40 rpm_resume+0x4f9/0x710 ? pci_conf1_read+0xb6/0xf0 ? pci_conf1_write+0xb2/0xe0 __pm_runtime_resume+0x47/0x70 pci_device_shutdown+0x1e/0x60 device_shutdown+0x14a/0x1f0 kernel_restart+0xe/0x50 __do_sys_reboot+0x1ee/0x210 ? __fput+0x144/0x1d0 do_writev+0x5e/0xf0 ? do_writev+0x5e/0xf0 do_syscall_64+0x48/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It was also likely possible to trigger this bug when hotplugging PCI devices. To fix this, instead of storing a pointer, we use kstrdup() to copy the disable_acs_redir_param to its own buffer which will never be freed. Fixes: aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support") Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2019-01-16PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()Ming Lei1-9/+13
The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if fewer than @min_vecs interrupt vectors are available for @dev. However, if a device supports MSI-X but not MSI and a caller requests @min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL (from the failed attempt to enable MSI), not -ENOSPC. When -ENOSPC is returned, callers may reduce the number IRQs they request and try again. Most callers can use the @min_vecs and @max_vecs parameters to avoid this retry loop, but that doesn't work when using IRQ affinity "nr_sets" because rebalancing the sets is driver-specific. This return value bug has been present since pci_alloc_irq_vectors() was added in v4.10 by aff171641d18 ("PCI: Provide sensible IRQ vector alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs removed the need for callers to iteratively reduce the number of IRQs requested and retry the allocation, so they didn't need to distinguish -ENOSPC from -EINVAL. In v5.0, 6da4b3ab9a6e ("genirq/affinity: Add support for allocating interrupt sets") added IRQ sets to the interface, which reintroduced the need to check for -ENOSPC and possibly reduce the number of IRQs requested and retry the allocation. Signed-off-by: Ming Lei <ming.lei@redhat.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de>
2019-01-15PCI: Fix PCI kconfig menu organizationRob Herring1-14/+8
After commit eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci"), all the PCI kconfig options appear below "PCI support" rather than within a sub-menu. This is because menuconfig expects all kconfig entries to be enclosed in an if/endif section. Add the missing if/endif. With this, "depends on PCI" is redundant in the sub-menu entries and can be removed. Fixes: eb01d42a7778 ("PCI: consolidate PCI config entry in drivers/pci") Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-01-12Merge tag 'remove-dma_zalloc_coherent-5.0' of ↵Linus Torvalds2-7/+7
git://git.infradead.org/users/hch/dma-mapping Pull dma_zalloc_coherent() removal from Christoph Hellwig: "We've always had a weird situation around dma_zalloc_coherent. To safely support mapping the allocations to userspace major architectures like x86 and arm have always zeroed allocations from dma_alloc_coherent, but a couple other architectures were missing that zeroing either always or in corner cases. Then later we grew anothe dma_zalloc_coherent interface to explicitly request zeroing, but that just added __GFP_ZERO to the allocation flags, which for some allocators that didn't end up using the page allocator ended up being a no-op and still not zeroing the allocations. So for this merge window I fixed up all remaining architectures to zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op wrapper around dma_alloc_coherent, which fixes all of the above issues. dma_zalloc_coherent is now pointless and can go away, and Luis helped me writing a cocchinelle script and patch series to kill it, which I think we should apply now just after -rc1 to finally settle these issue" * tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: remove dma_zalloc_coherent() cross-tree: phase out dma_zalloc_coherent() on headers cross-tree: phase out dma_zalloc_coherent()
2019-01-08PCI: amlogic: Fix build failure due to missing gpio headerCorentin Labbe1-0/+1
Building the driver when GPIOLIB=n is not selected is causing the following compilation failure: drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset': drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(mp->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe': drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW Add the missing linux/gpio/consumer.h header to fix it. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain2-7/+7
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-06Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds22-184/+1521
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds1-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge branch 'pci/imx6'Bjorn Helgaas1-0/+10
- Enable MSI for imx6 downstream components (Richard Zhu) * pci/imx6: PCI: imx: Enable MSI from downstream components
2019-01-03Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas3-0/+482
- Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description # Conflicts: # drivers/pci/controller/dwc/Kconfig # drivers/pci/controller/dwc/Makefile
2019-01-03Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas1-82/+27
- Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) * remotes/lorenzo/pci/mediatek: arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port PCI: mediatek: Use devm_of_pci_get_host_bridge_resources() to parse DT
2019-01-03Merge branch 'remotes/lorenzo/pci/dwc-msi'Bjorn Helgaas1-13/+24
- Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) * remotes/lorenzo/pci/dwc-msi: PCI: dwc: Move interrupt acking into the proper callback PCI: dwc: Take lock when ACKing an interrupt PCI: dwc: Use interrupt masking instead of disabling
2019-01-03Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas9-21/+146
- Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) * remotes/lorenzo/pci/dwc: MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support dt-bindings: imx6q-pcie: Add multi-pd bindings for imx6sx PCI: histb: Constify dw_pcie_host_ops structure
2019-01-03Merge branch 'remotes/lorenzo/pci/amlogic'Bjorn Helgaas3-0/+603
- Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) * remotes/lorenzo/pci/amlogic: PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
2019-01-03Merge branch 'pci/virtualization'Bjorn Helgaas1-12/+36
- Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) * pci/virtualization: s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs()
2019-01-03Merge branch 'pci/switchtec'Bjorn Helgaas1-17/+137
- Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) * pci/switchtec: switchtec: Add MRPC DMA mode support switchtec: Improve MRPC efficiency by enabling write combining switchtec: Fix SWITCHTEC_IOCTL_EVENT_IDX_ALL flags overwrite switchtec: Set DMA coherent mask switchtec: Remove immediate status check after submitting MRPC command
2019-01-03Merge branch 'pci/pm'Bjorn Helgaas1-15/+12
- Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) * pci/pm: PCI / PM: Allow runtime PM without callback functions
2019-01-03Merge branch 'pci/peer-to-peer'Bjorn Helgaas1-7/+7
- Clean up P2PDMA documentation (Randy Dunlap) * pci/peer-to-peer: PCI/P2PDMA: Clean up documentation and kernel-doc
2019-01-03Merge branch 'pci/misc'Bjorn Helgaas4-11/+37
- Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) * pci/misc: PCI: Override Synopsys USB 3.x HAPS device class PCI: Move Synopsys HAPS platform device IDs PCI: Add missing include to drivers/pci.h PCI: Remove unnecessary space before function pointer arguments MAINTAINERS: Add x86 early-quirks.c file pattern to PCI subsystem PCI: Expand the "PF" acronym in Kconfig help text
2019-01-02PCI: imx: Enable MSI from downstream componentsRichard Zhu1-0/+10
The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls whether a Function can request service using MSI. i.MX6 Root Ports implement the MSI Capability and may use MSI to request service for events like PME, hotplug, AER, etc. In addition, on i.MX6, the MSI Enable bit controls delivery of MSI interrupts from components below the Root Port. Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI Enable bit so it could use PME, hotplug, AER, etc. As a side effect, that also enabled delivery of MSI interrupts from downstream components. The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable in imx6q-pcie so MSI from downstream components works even if nobody uses MSI for the Root Port events. Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Sven Van Asbroeck <TheSven73@googlemail.com> Tested-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-01-02PCI/IOV: Add flag so platforms can skip VF scanningSebastian Ott1-0/+6
Provide a flag to skip scanning for new VFs after SR-IOV enablement. This can be set by implementations for which the VFs are already reported by other means. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-01-02PCI/IOV: Factor out sriov_add_vfs()Sebastian Ott1-13/+31
Provide sriov_add_vfs() as a wrapper to scan for VFs that cleans up after itself. This is just a code simplification. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-12-30Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds2-1/+31
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-12-29Merge tag 'char-misc-4.21-rc1' of ↵Linus Torvalds2-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc driver patches for 4.21-rc1. Lots of different types of driver things in here, as this tree seems to be the "collection of various driver subsystems not big enough to have their own git tree" lately. Anyway, some highlights of the changes in here: - binderfs: is it a rule that all driver subsystems will eventually grow to have their own filesystem? Binder now has one to handle the use of it in containerized systems. This was discussed at the Plumbers conference a few months ago and knocked into mergable shape very fast by Christian Brauner. Who also has signed up to be another binder maintainer, showing a distinct lack of good judgement :) - binder updates and fixes - mei driver updates - fpga driver updates and additions - thunderbolt driver updates - soundwire driver updates - extcon driver updates - nvmem driver updates - hyper-v driver updates - coresight driver updates - pvpanic driver additions and reworking for more device support - lp driver updates. Yes really, it's _finally_ moved to the proper parallal port driver model, something I never thought I would see happen. Good stuff. - other tiny driver updates and fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits) MAINTAINERS: add another Android binder maintainer intel_th: msu: Fix an off-by-one in attribute store stm class: Add a reference to the SyS-T document stm class: Fix a module refcount leak in policy creation error path char: lp: use new parport device model char: lp: properly count the lp devices char: lp: use first unused lp number while registering char: lp: detach the device when parallel port is removed char: lp: introduce list to save port number bus: qcom: remove duplicated include from qcom-ebi2.c VMCI: Use memdup_user() rather than duplicating its implementation char/rtc: Use of_node_name_eq for node name comparisons misc: mic: fix a DMA pool free failure ptp: fix an IS_ERR() vs NULL check genwqe: Fix size check binder: implement binderfs binder: fix use-after-free due to ksys_close() during fdget() bus: fsl-mc: remove duplicated include files bus: fsl-mc: explicitly define the fsl_mc_command endianness misc: ti-st: make array read_ver_cmd static, shrinks object size ...
2018-12-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-8/+2
Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-22 10:29:54 +0300