summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-07Merge branch 'pci/trivial'Bjorn Helgaas1-493/+485
- clean up quirks.c organization and whitespace (Bjorn Helgaas) * pci/trivial: PCI: Clean up whitespace in quirks.c PCI: Reorder quirks infrastructure code
2018-06-07Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+20
- add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) * pci/virtualization: PCI/IOV: Allow PF drivers to limit total_VFs to 0 PCI: Add "pci=noats" boot parameter PCI: Add ACS quirk for Intel 300 series PCI: Add ACS quirk for Intel 7th & 8th Gen mobile nvme-pci: Use pci_sriov_configure_simple() to enable VFs net: ena: Use pci_sriov_configure_simple() to enable VFs PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs PCI/IOV: Add pci_sriov_configure_simple()
2018-05-11PCI: Clean up whitespace in quirks.cBjorn Helgaas1-335/+329
Clean up whitespace, capitalization, etc. in comments. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-11PCI: Reorder quirks infrastructure codeBjorn Helgaas1-158/+156
The infrastructure that applies PCI quirks was buried in the middle of the quirks themselves (at one time it was probably at the end of the file, but new quirks tend to be added at the end of the file). Move it all to the top of the file so it's easy to find. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-07PCI: Add Qualcomm vendor IDBjorn Helgaas1-2/+2
Add the Qualcomm vendor ID to pci_ids.h and use it in quirks. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-27PCI: Add ACS quirk for Intel 300 seriesMika Westerberg1-0/+6
Intel 300 series chipset still has the same ACS issue as the previous generations so extend the ACS quirk to cover it as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2018-04-27PCI: Add ACS quirk for Intel 7th & 8th Gen mobileAlex Williamson1-0/+14
The specification update indicates these have the same errata for implementing non-standard ACS capabilities. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2018-04-10PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as brokenSinan Kaya1-0/+4
Per PCIe r3.1, sec 2.2.6.2 and 7.8.4, a Requester may not use 8-bit Tags unless its Extended Tag Field Enable is set, but all Receivers/Completers must handle 8-bit Tags correctly regardless of their Extended Tag Field Enable. Some devices do not handle 8-bit Tags as Completers, so add a quirk for them. If we find such a device, we disable Extended Tags for the entire hierarchy to make peer-to-peer DMA possible. The Broadcom HT1100/HT2000/HT2100 seems to have issues with handling 8-bit tags. Mark it as broken. This fixes Xorg hangs and unresponsive keyboards with errors like this: radeon 0000:06:00.0: GPU lockup (current fence id 0x000000000000000e last fence id 0x0000000000000 [drm:r600_ring_test [radeon]] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD) [drm:r600_resume [radeon]] *ERROR* r600 startup failed on resume Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196197 Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> CC: stable@vger.kernel.org # v4.11: 62ce94a7a5a5 PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken CC: stable@vger.kernel.org # v4.11
2018-04-07Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-151/+27
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-04Merge branch 'pci/vpd'Bjorn Helgaas1-121/+0
- consolidate VPD code in vpd.c (Bjorn Helgaas) * pci/vpd: PCI/VPD: Move VPD structures to vpd.c PCI/VPD: Move VPD quirks to vpd.c PCI/VPD: Move VPD sysfs code to vpd.c PCI/VPD: Move VPD access code to vpd.c
2018-04-04Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+12
- probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) * pci/virtualization: PCI/IOV: Add missing prototypes for powerpc pcibios interfaces PCI/IOV: Use VF0 cached config registers for other VFs PCI/IOV: Skip BAR sizing for VFs PCI/IOV: Skip INTx config reads for VFs PCI: Wait for device to become ready after secondary bus reset PCI: Add a return type for pci_reset_bridge_secondary_bus() PCI: Wait for device to become ready after a power management reset PCI: Rename pci_flr_wait() to pci_dev_wait() and make it generic PCI: Handle FLR failure and allow other reset types PCI: Protect restore with device lock to be consistent PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 PCI: Add ACS quirk for Ampere root ports PCI: Remove redundant probes for device reset support PCI: Probe for device reset support during enumeration Conflicts: include/linux/pci.h
2018-04-03Merge tag 'arch-removal' of ↵Linus Torvalds1-19/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie1-16/+25
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-20Merge branch 'for-4.16-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "I sat on them too long and it's quite a few this late, but nothing has a wide blast area. The changes are... - Fix corner cases in SG command handling. - Recent introduction of default powersaving mode config option exposed several devices with broken powersaving behaviors. A number of patches to update the blacklist accordingly. - Fix a kernel panic on SAS hotplug. - Other misc and device specific updates" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs libata: Enable queued TRIM for Samsung SSD 860 PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L ahci: Add PCI-id for the Highpoint Rocketraid 644L card ata: do not schedule hot plug if it is a sas host libata: disable LPM for Crucial BX100 SSD 500GB drive libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs libata: update documentation for sysfs interfaces ata: sata_rcar: Remove unused variable in sata_rcar_init_controller() libata: transport: cleanup documentation of sysfs interface sata_rcar: Reset SATA PHY when Salvator-X board resumes libata: don't try to pass through NCQ commands to non-NCQ devices libata: remove WARN() for DMA or PIO command without data libata: fix length validation of ATAPI-relayed SCSI commands ata: libahci: fix comment indentation ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine() libata: Fix compile warning with ATA_DEBUG enabled
2018-03-19PCI: Tidy commentsBjorn Helgaas1-7/+7
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19PCI: Report quirks that take more than 10msBjorn Helgaas1-11/+6
With "initcall_debug", we report how long every PCI quirk took. Even without "initcall_debug", report the runtime of any quirk that takes longer than 10ms. This is to make it easier to notice quirks that slow down boot. This was motivated by a report from Paul Menzel that PCI final quirks took half a second at boot. Link: https://lkml.kernel.org/r/44cada166e42007d27b4c3e3aa0744d7@molgen.mpg.de Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19PCI: Report quirk timings with pci_info() instead of pr_debug()Bjorn Helgaas1-5/+2
With "initcall_debug", we report how long every PCI quirk took. Previously we used pr_debug(), which means you have to figure out how to enable debug output. Log these timings using pci_info() instead so it doesn't depend on DEBUG, CONFIG_DYNAMIC_DEBUG, etc. Also, don't log anything at all unless "initcall_debug" is specified. This matches what we do in do_one_initcall_debug(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19PCI/VPD: Move VPD quirks to vpd.cBjorn Helgaas1-121/+0
Move the VPD-related quirks from quirks.c to vpd.c, which removes the need for struct pci_vpd outside vpd.c. The goal is to encapsulate all the VPD code and structures in vpd.c. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-16arch: remove tile portArnd Bergmann1-19/+0
The Tile architecture port was added by Chris Metcalf in 2010, and maintained until early 2018 when he orphaned it due to his departure from Mellanox, and nobody else stepped up to maintain it. The product line is still around in the form of the BlueField SoC, but no longer uses the Tile architecture. There are also still products for sale with Tile-GX SoCs, notably the Mikrotik CCR router family. The products all use old (linux-3.3) kernels with lots of patches and won't be upgraded by their manufacturers. There have been efforts to port both OpenWRT and Debian to these, but both projects have stalled and are very unlikely to be continued in the future. Given that we are reasonably sure that nobody is still using the port with an upstream kernel any more, it seems better to remove it now while the port is in a good shape than to let it bitrot for a few years first. Cc: Chris Metcalf <chris.d.metcalf@gmail.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: http://www.mellanox.com/page/npu_multicore_overview Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-14vga_switcheroo: Use device link for HDA controllerLukas Wunner1-0/+39
Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: https://www.kernel.org/doc/html/latest/driver-api/device_link.html Documentation/driver-api/device_link.rst Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
2018-03-04PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644LHans de Goede1-0/+2
The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with other Marvel controllers this needs a function 1 DMA alias quirk. Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and already is listed with a function 1 DMA alias quirk. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-02-27PCI: Add function 1 DMA alias quirk for Marvell 88SE9220Thomas Vincent-Cross1-0/+3
Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-23PCI: Add ACS quirk for Ampere root portsFeng Kan1-0/+9
The Ampere Computing PCIe root port does not support ACS at this point. However, the hardware provides isolation and source validation through the SMMU. The stream ID generated by the PCIe ports contain both the bus/device/function number as well as the port ID in its 3 most significant bits. Turn on ACS but disable all the peer-to-peer features. APM is being rebranded to Ampere. The Vendor and Device IDs change, but the functionality stays the same. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-16PCI/cxgb4: Extend T3 PCI quirk to T4+ devicesCasey Leedom1-16/+23
We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4ff88 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e658794ca1 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-31Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+4
* pci/virtualization: PCI: Expose ari_enabled in sysfs PCI: Add function 1 DMA alias quirk for Marvell 9128 PCI: Mark Ceton InfiniTV4 INTx masking as broken xen/pci: Use acpi_noirq_set() helper to avoid #ifdef
2018-01-31Merge branch 'pci/msi' into nextBjorn Helgaas1-1/+1
* pci/msi: PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas1-102/+99
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-101/+99
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-17PCI: Deprecate pci_get_bus_and_slot()Sinan Kaya1-1/+2
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). When we have a pci_dev, extract the domain number from it. The config access syscalls don't allow the user to supply a domain number, so they only work on devices in domain 0, so we can just hard-code that. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: squash quirk & syscall patches together] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-16PCI: Add function 1 DMA alias quirk for Marvell 9128Alex Williamson1-0/+2
The Marvell 9128 is the original device generating bug 42679, from which many other Marvell DMA alias quirks have been sourced, but we didn't have positive confirmation of the fix on 9128 until now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Link: https://www.spinics.net/lists/kvm/msg161459.html Reported-by: Binarus <lists@binarus.de> Tested-by: Binarus <lists@binarus.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-13PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port modeDongdong Liu1-1/+1
HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It always advertises an MSI capability, but it can only generate MSIs when in Endpoint mode. The device has the same Vendor and Device IDs in both modes, so check the Class Code and disable MSI only when operating as a Root Port. [bhelgaas: changelog] Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Cc: stable@vger.kernel.org # v4.11+
2017-12-19PCI: Mark Ceton InfiniTV4 INTx masking as brokenBjorn Helgaas1-0/+2
PCI_COMMAND_INTX_DISABLE is writable on the Ceton InfiniTV4, indicating that the device supports disabling the INTx# signal, but it apparently doesn't work. Mark the device so we know we can't use PCI_COMMAND_INTX_DISABLE to disable its interrupts. Link: https://lkml.kernel.org/r/92a65068-60b2-c1a8-9e17-ac41fe3c5c93@code.jackst.com Reported-by: John Strader <strader.john@code.jackst.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-19PCI: Remove unneeded kallsyms includeSergey Senozhatsky1-1/+0
The file was converted from print_fn_descriptor_symbol() to %pF some time ago (c9bbb4abb658 "PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c"). kallsyms does not seem to be needed anymore. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-16Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds1-6/+36
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14Merge branch 'pci/host-thunder' into nextBjorn Helgaas1-0/+7
* pci/host-thunder: PCI: Avoid slot reset if bridge itself is broken PCI: Avoid bus reset if bridge itself is broken PCI: Mark Cavium CN8xxx to avoid bus reset
2017-11-14Merge branch 'pci/host-layerscape' into nextBjorn Helgaas1-0/+8
* pci/host-layerscape: PCI: layerscape: Change default error response behavior PCI: Disable MSI for Freescale Layerscape PCIe RC mode arm64: dts: ls1046a: Add PCIe controller DT nodes arm64: dts: ls1012a: Add PCIe controller DT node PCI: layerscape: Add support for ls1012a arm64: dts: ls1012a: Add MSI controller DT node irqchip/ls-scfg-msi: Add LS1012a MSI support
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20PCI: Disable MSI for Freescale Layerscape PCIe RC modeHou Zhiqiang1-0/+8
The Freescale PCIe controller advertises the MSI/MSI-X capability in both RC and Endpoint mode, but in RC mode it doesn't support MSI/MSI-X by itself; it can only transfer MSI/MSI-X from downstream devices. Add a quirk to prevent use of MSI/MSI-X in RC mode. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
2017-10-19PCI: Apply Cavium ThunderX ACS quirk to more Root PortsVadim Lomovtsev1-1/+14
Extend the Cavium ThunderX ACS quirk to cover more device IDs and restrict it to only Root Ports. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> [bhelgaas: changelog, stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.12+
2017-10-19PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UFVadim Lomovtsev1-5/+7
The Cavium ThunderX (CN8XXX) family of PCIe Root Ports does not advertise an ACS capability. However, the RTL internally implements similar protection as if ACS had Request Redirection, Completion Redirection, Source Validation, and Upstream Forwarding features enabled. Change Cavium ACS capabilities quirk flags accordingly. Fixes: b404bcfbf035 ("PCI: Add ACS quirk for all Cavium devices") Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> [bhelgaas: tidy changelog, comment, stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.6+: b77d537d00d0: PCI: Apply Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
2017-10-11PCI: Mark Cavium CN8xxx to avoid bus resetDavid Daney1-0/+7
Root ports of cn8xxx do not function after bus reset when used with some e1000e and LSI HBA devices. Add a quirk to prevent bus reset on these root ports. Signed-off-by: David Daney <david.daney@cavium.com> [jglauber@cavium.com: fixed typo and whitespaces] Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig1-1/+1
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-09Merge tag 'pci-v4.14-changes' of ↵Linus Torvalds1-18/+46
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-09-07Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+29
* pci/virtualization: PCI: Disable VF decoding before pcibios_sriov_disable() updates resources PCI: Add ACS quirk for APM X-Gene devices PCI: Mark AMD Stoney GPU ATS as broken Conflicts: drivers/pci/quirks.c
2017-09-07Merge branch 'pci/trivial' into nextBjorn Helgaas1-1/+1
* pci/trivial: PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
2017-09-07Merge branch 'pci/enumeration' into nextBjorn Helgaas1-0/+16
* pci/enumeration: PCI: Warn periodically while waiting for non-CRS ("device ready") status PCI: Wait up to 60 seconds for device to become ready after FLR PCI: Factor out pci_bus_wait_crs() PCI: Add pci_bus_crs_vendor_id() to detect CRS response data PCI: Always check for non-CRS response before timeout PCI: Avoid race while enabling upstream bridges PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken
2017-09-04Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'Rafael J. Wysocki1-2/+3
* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks
2017-09-02PCI: Fix typos and whitespace errorsBjorn Helgaas1-1/+1
Fix various typos and whitespace errors: s/Synopsis/Synopsys/ s/Designware/DesignWare/ s/Keystine/Keystone/ s/gpio/GPIO/ s/pcie/PCIe/ s/phy/PHY/ s/confgiruation/configuration/ No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-31x86/PCI: Move VMD quirk to x86 fixupsJon Derrick1-17/+0
VMD currently only exists for Intel x86 products, so move the VMD quirk to arch/x86. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-15PCI: Disable Relaxed Ordering Attributes for AMD A1100dingtianhong1-0/+16
Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe Root Port where Upstream Transaction Layer Packets with the Relaxed Ordering Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering set, it would cause Data Corruption, so we need to disable Relaxed Ordering Attribute when Upstream TLPs to the Root Port. Reported-and-suggested-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-31 04:16:33 +0300