summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas1-5/+5
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-11PCI: Use DWORD accesses for LTR, L1 SS to avoid erratumRajat Jain1-8/+8
Some devices have an erratum such that they only support DWORD accesses to some registers. E.g., this Bayhub O2 device ([VID:DID] = [0x1217:0x8621]) only supports DWORD accesses to LTR latency registers and L1 PM substates control registers: https://github.com/rajatxjain/public_shared/blob/main/OZ711LV2_appnote.pdf The L1 PM substate control registers are DWORD sized, and hence their access in the kernel is already DWORD sized, so we don't need to do anything for them. However, the LTR registers being WORD sized, are in need of a solution. Convert the WORD sized accesses to these registers into DWORD sized accesses while saving and restoring them. Link: https://lore.kernel.org/r/20211222012105.3438916-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-17PCI/MSI: Decouple MSI[-X] disable from pcim_release()Thomas Gleixner1-5/+0
The MSI core will introduce runtime allocation of MSI related data. This data will be devres managed and has to be set up before enabling PCI/MSI[-X]. This would introduce an ordering issue vs. pcim_release(). The setup order is: pcim_enable_device() devres_alloc(pcim_release...); ... pci_irq_alloc() msi_setup_device_data() devres_alloc(msi_device_data_release, ...) and once the device is released these release functions are invoked in the opposite order: msi_device_data_release() ... pcim_release() pci_disable_msi[x]() which is obviously wrong, because pci_disable_msi[x]() requires the MSI data to be available to tear down the MSI[-X] interrupts. Remove the MSI[-X] teardown from pcim_release() and add an explicit action to be installed on the attempt of enabling PCI/MSI[-X]. This allows the MSI core data allocation to be ordered correctly in a subsequent step. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/87tuf9rdoj.ffs@tglx
2021-11-18PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config readsNaveen Naidu1-5/+5
When config pci_ops.read() can detect failed PCI transactions, the data returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff). Obviously a successful PCI config read may *also* return that data if a config register happens to contain ~0, so it doesn't definitively indicate an error unless we know the register cannot contain ~0. Use PCI_POSSIBLE_ERROR() to check the response we get when we read data from hardware. This unifies PCI error response checking and makes error checks consistent and easier to find. Link: https://lore.kernel.org/r/f4d18d470cb90f9cb52ea155b01528ba2e76e8d6.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-13Merge tag 's390-5.16-2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Add PCI automatic error recovery. - Fix tape driver timer initialization broken during timers api cleanup. - Fix bogus CPU measurement counters values on CPUs offlining. - Check the validity of subchanel before reading other fields in the schib in cio code. * tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: check the subchannel validity for dev_busid s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove s390/tape: fix timer initialization in tape_std_assign() s390/pci: implement minimal PCI error recovery PCI: Export pci_dev_lock() s390/pci: implement reset_slot for hotplug slot s390/pci: refresh function handle in iomap
2021-11-12Merge tag 'pci-v5.16-fixes-1' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Revert conversion to struct device.driver instead of struct pci_dev.driver. The device.driver is set earlier, and using it caused the PCI core to call driver PM entry points before .probe() and after .remove(), when the driver isn't prepared. This caused NULL pointer dereferences in i2c_designware_pci and probably other driver issues" * tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Use to_pci_driver() instead of pci_dev->driver" Revert "PCI: Remove struct pci_dev->driver"
2021-11-11Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"Bjorn Helgaas1-9/+8
This reverts commit 2a4d9408c9e8b6f6fc150c66f3fef755c9e20d4a. Robert reported a NULL pointer dereference caused by the PCI core (local_pci_probe()) calling the i2c_designware_pci driver's .runtime_resume() method before the .probe() method. i2c_dw_pci_resume() depends on initialization done by i2c_dw_pci_probe(). Prior to 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver"), pci_pm_runtime_resume() avoided calling the .runtime_resume() method because pci_dev->driver had not been set yet. 2a4d9408c9e8 and b5f9c644eb1b ("PCI: Remove struct pci_dev->driver"), removed pci_dev->driver, replacing it by device->driver, which *has* been set by this time, so pci_pm_runtime_resume() called the .runtime_resume() method when it previously had not. Fixes: 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver") Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/ Reported-by: Robert Święcki <robert@swiecki.net> Tested-by: Robert Święcki <robert@swiecki.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-08Merge tag 'cxl-for-5.16' of ↵Linus Torvalds1-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl updates from Dan Williams: "More preparation and plumbing work in the CXL subsystem. From an end user perspective the highlight here is lighting up the CXL Persistent Memory related commands (label read / write) with the generic ioctl() front-end in LIBNVDIMM. Otherwise, the ability to instantiate new persistent and volatile memory regions is still on track for v5.17. Summary: - Fix support for platforms that do not enumerate every ACPI0016 (CXL Host Bridge) in the CHBS (ACPI Host Bridge Structure). - Introduce a common pci_find_dvsec_capability() helper, clean up open coded implementations in various drivers. - Add 'cxl_test' for regression testing CXL subsystem ABIs. 'cxl_test' is a module built from tools/testing/cxl/ that mocks up a CXL topology to augment the nascent support for emulation of CXL devices in QEMU. - Convert libnvdimm to use the uuid API. - Complete the definition of CXL namespace labels in libnvdimm. - Tunnel libnvdimm label operations from nd_ioctl() back to the CXL mailbox driver. Enable 'ndctl {read,write}-labels' for CXL. - Continue to sort and refactor functionality into distinct driver and core-infrastructure buckets. For example, mailbox handling is now a generic core capability consumed by the PCI and cxl_test drivers" * tag 'cxl-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits) ocxl: Use pci core's DVSEC functionality cxl/pci: Use pci core's DVSEC functionality PCI: Add pci_find_dvsec_capability to find designated VSEC cxl/pci: Split cxl_pci_setup_regs() cxl/pci: Add @base to cxl_register_map cxl/pci: Make more use of cxl_register_map cxl/pci: Remove pci request/release regions cxl/pci: Fix NULL vs ERR_PTR confusion cxl/pci: Remove dev_dbg for unknown register blocks cxl/pci: Convert register block identifiers to an enum cxl/acpi: Do not fail cxl_acpi_probe() based on a missing CHBS cxl/pci: Disambiguate cxl_pci further from cxl_mem Documentation/cxl: Add bus internal docs cxl/core: Split decoder setup into alloc + add tools/testing/cxl: Introduce a mock memory device + driver cxl/mbox: Move command definitions to common location cxl/bus: Populate the target list at decoder create tools/testing/cxl: Introduce a mocked-up CXL port hierarchy cxl/pmem: Add support for multiple nvdimm-bridge objects cxl/pmem: Translate NVDIMM label commands to CXL label commands ...
2021-11-08PCI: Export pci_dev_lock()Niklas Schnelle1-1/+2
Commit e3a9b1212b9d ("PCI: Export pci_dev_trylock() and pci_dev_unlock()") already exported pci_dev_trylock()/pci_dev_unlock() however in some circumstances such as during error recovery it makes sense to block waiting to get full access to the device so also export pci_dev_lock(). Link: https://lore.kernel.org/all/20210928181014.GA713179@bhelgaas/ Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-07Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds1-14/+51
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-4/+5
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05Merge branch 'pci/hotplug'Bjorn Helgaas1-0/+2
- Ignore Link Down/Up caused by error-induced Hot Reset so endpoint driver can remain bound to device during error recovery (Lukas Wunner) - Remove unused resume err_handler (Lukas Wunner) - Remove unused pcie_port_bus_{,un}register() declarations (Lukas Wunner) - Skip compiling err.c when CONFIG_PCIEAER not set (Lukas Wunner) * pci/hotplug: PCI/ERR: Reduce compile time for CONFIG_PCIEAER=n PCI/portdrv: Remove unused pcie_port_bus_{,un}register() declarations PCI/portdrv: Remove unused resume err_handler PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot Reset PCI/portdrv: Rename pm_iter() to pcie_port_device_iter()
2021-11-05Merge branch 'pci/driver'Bjorn Helgaas1-8/+9
- Drop the struct pci_dev.driver pointer, which is redundant with the struct device.driver pointer (Uwe Kleine-König) * pci/driver: PCI: Remove struct pci_dev->driver PCI: Use to_pci_driver() instead of pci_dev->driver x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver usb: xhci: Use to_pci_driver() instead of pci_dev->driver cxl: Use to_pci_driver() instead of pci_dev->driver cxl: Factor out common dev->driver expressions xen/pcifront: Use to_pci_driver() instead of pci_dev->driver xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv nfp: use dev_driver_string() instead of pci_dev->driver->name mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name net: hns3: use dev_driver_string() instead of pci_dev->driver->name crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name ssb: Use dev_driver_string() instead of pci_dev->driver->name bcma: simplify reference to driver name crypto: qat - simplify adf_enable_aer() scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter PCI/ERR: Factor out common dev->driver expressions PCI: Drop pci_device_probe() test of !pci_dev->driver PCI: Drop pci_device_remove() test of pci_dev->driver PCI: Return NULL for to_pci_driver(NULL)
2021-11-05Merge branch 'pci/enumeration'Bjorn Helgaas1-2/+10
- Rename pcibios_add_device() to pcibios_device_add() since it's called from pci_device_add() (Oliver O'Halloran) - Don't try to enable AtomicOps on VFs, since they can only be enabled on the PF (Selvin Xavier) * pci/enumeration: PCI: Do not enable AtomicOps on VFs PCI: Rename pcibios_add_device() to pcibios_device_add()
2021-11-04PCI: Do not enable AtomicOps on VFsSelvin Xavier1-0/+8
Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/1631354585-16597-1-git-send-email-selvin.xavier@broadcom.com Fixes: 35f5ace5dea4 ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a23689dea ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
2021-11-04Merge tag 'staging-5.16-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates and cleanups for 5.16-rc1. Overall we ended up removing a lot of code this time, a bit over 20,000 lines are now gone thanks to a lot of cleanup work by many developers. Nothing huge in here functionality wise, just loads of cleanups: - r8188eu driver major cleanups and removal of unused and dead code - wlan-ng minor cleanups - fbtft driver cleanups - most driver cleanups - rtl8* drivers cleanups - rts5208 driver cleanups - vt6655 driver cleanups - vc04_services drivers cleanups - wfx cleanups on the way to almost getting this merged out of staging (it's close!) - tiny mips changes needed for the mt7621 drivers, they have been acked by the respective subsystem maintainers to go through this tree. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits) staging: r8188eu: hal: remove goto statement and local variable staging: rtl8723bs: hal remove the assignment to itself staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4 staging: vchiq_core: get rid of typedef staging: fieldbus: anybus: reframe comment to avoid warning staging: r8188eu: fix missing unlock in rtw_resume() staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame staging: r8188eu: core: remove goto statement staging: vt6655: Rename `dwAL7230InitTable` array staging: vt6655: Rename `dwAL2230PowerTable` array staging: vt6655: Rename `dwAL7230InitTableAMode` array staging: vt6655: Rename `dwAL7230ChannelTable2` array staging: vt6655: Rename `dwAL7230ChannelTable1` array staging: vt6655: Rename `dwAL7230ChannelTable0` array staging: vt6655: Rename `dwAL2230ChannelTable1` array staging: vt6655: Rename `dwAL2230ChannelTable0` array staging: r8712u: fix control-message timeout staging: rtl8192u: fix control-message timeouts staging: mt7621-dts: add missing SPDX license to files staging: vchiq_core: fix quoted strings split across lines ...
2021-10-29PCI: Add pci_find_dvsec_capability to find designated VSECBen Widawsky1-0/+32
Add pci_find_dvsec_capability to locate a Designated Vendor-Specific Extended Capability with the specified Vendor ID and Capability ID. The Designated Vendor-Specific Extended Capability (DVSEC) allows one or more "vendor" specific capabilities that are not tied to the Vendor ID of the PCI component. Where the DVSEC Vendor may be a standards body like CXL. Cc: David E. Box <david.e.box@linux.intel.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-pci@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163379787943.692348.6814373487017444007.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-10-27PCI: Prefer 'unsigned int' over bare 'unsigned'Krzysztof Wilczyński1-2/+3
The bare "unsigned" type implicitly means "unsigned int", but the preferred coding style is to use the complete type name. Update the bare use of "unsigned" to the preferred "unsigned int". No change to functionality intended. See a1ce18e4f941 ("checkpatch: warn on bare unsigned or signed declarations without int"). Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27PCI: Remove redundant 'rc' initializationColin Ian King1-1/+1
The variable 'rc' is being initialized with a value that is never read. Remove the redundant assignment. Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210910161417.91001-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-10-21PCI: PM: Fix ordering of operations in pci_back_from_sleep()Rafael J. Wysocki1-1/+6
The ordering of operations in pci_back_from_sleep() is incorrect, because the device may be in D3cold when it runs and pci_enable_wake() needs to access the device's configuration space which cannot be done in D3cold. Fix this by calling pci_set_power_state() to put the device into D0 before calling pci_enable_wake() for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-19PCI: Re-enable Downstream Port LTR after reset or hotplugMingchuang Qiao1-0/+25
Per PCIe r5.0, sec 7.5.3.16, Downstream Ports must disable LTR if the link goes down (the Port goes DL_Down status). This is a problem because the Downstream Port's dev->ltr_path is still set, so we think LTR is still enabled, and we enable LTR in the Endpoint. When it sends LTR messages, they cause Unsupported Request errors at the Downstream Port. This happens in the reset path, where we may enable LTR in pci_restore_pcie_state() even though the Downstream Port disabled LTR because the reset caused a link down event. It also happens in the hot-remove and hot-add path, where we may enable LTR in pci_configure_ltr() even though the Downstream Port disabled LTR when the hot-remove took the link down. In these two scenarios, check the upstream bridge and restore its LTR enable if appropriate. The Unsupported Request may be logged by AER as follows: pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: id=00e8 pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=00e8(Requester ID) pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00100000/00010000 pcieport 0000:00:1d.0: [20] Unsupported Request (First) In addition, if LTR is not configured correctly, the link cannot enter the L1.2 state, which prevents some machines from entering the S0ix low power state. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20211012075614.54576-1-mingchuang.qiao@mediatek.com Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Signed-off-by: Mingchuang Qiao <mingchuang.qiao@mediatek.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-10-18PCI: Use to_pci_driver() instead of pci_dev->driverUwe Kleine-König1-8/+9
Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pci_dev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-16PCI/ERR: Reduce compile time for CONFIG_PCIEAER=nLukas Wunner1-0/+2
The sole non-static function in err.c, pcie_do_recovery(), is only called from: * aer.c (if CONFIG_PCIEAER=y) * dpc.c (if CONFIG_PCIE_DPC=y, which depends on CONFIG_PCIEAER) * edr.c (if CONFIG_PCIE_EDR=y, which depends on CONFIG_PCIE_DPC) Thus, err.c need not be compiled if CONFIG_PCIEAER=n. Also, pci_uevent_ers() and pcie_clear_device_status(), which are called from err.c, can be #ifdef'ed away unless CONFIG_PCIEAER=y. Since x86_64_defconfig doesn't enable CONFIG_PCIEAER, this change may slightly reduce compile time for anyone doing a test build with that config. Link: https://lore.kernel.org/r/98f9041151268c1c035ab64cca320ad86803f64a.1627638184.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-12PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()Krzysztof Wilczyński1-1/+1
Cppcheck warns that pci_dev_str_match_path() passes pointers to signed ints to sscanf("%x"), which expects pointers to *unsigned* ints: invalidScanfArgType_int drivers/pci/pci.c:312 %x in format string (no. 2) requires 'unsigned int *' but the argument type is 'signed int *'. Declare the variables as unsigned to avoid this issue. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20211008222732.2868493-3-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-05PCI: PM: Do not call platform_pci_power_manageable() unnecessarilyRafael J. Wysocki1-11/+5
Drop two invocations of platform_pci_power_manageable() that are not necessary, because the functions called when it returns 'true' do the requisite "power manageable" checks themselves. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-10-05PCI: PM: Make pci_choose_state() call pci_target_state()Rafael J. Wysocki1-38/+16
The pci_choose_state() and pci_target_state() implementations are somewhat divergent without a good reason, because they are used for similar purposes. Change the pci_choose_state() implementation to use pci_target_state() internally except for transitions to the working state of the system in which case it is expected to return D0. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-10-05PCI: PM: Rearrange pci_target_state()Rafael J. Wysocki1-14/+9
Make pci_target_state() return D3cold or D0 without checking PME support if the current power state of the device is D3cold or if it does not support the standard PCI PM, respectively. Next, drop the tergat_state local variable that has become redundant from it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-10-05PCI: PM: Drop struct pci_platform_pm_opsRafael J. Wysocki1-11/+0
After previous changes there are no more users of struct pci_platform_pm_ops in the tree, so drop it along with all of the remaining related code. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-10-05PCI: Allow architecture-specific pci_remap_iospace()Sergio Paracuellos1-0/+2
pci_remap_iospace() was originally meant as an architecture specific helper but it moved into generic code after all architectures had the same requirements. MIPS has different requirements so it should not be shared. The way for doing this will be using a macro 'pci_remap_iospace' defined for those architectures that need a special treatment. Hence, put core API function inside preprocesor conditional code for 'pci_remap_iospace' definition. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210925203224.10419-5-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-29PCI: ACPI: PM: Do not use pci_platform_pm_ops for ACPIRafael J. Wysocki1-13/+9
Using struct pci_platform_pm_ops for ACPI adds unnecessary indirection to the interactions between the PCI core and ACPI PM, which is also subject to retpolines. Moreover, it is not particularly clear from the current code that, as far as PCI PM is concerned, "platform" really means just ACPI except for the special casess when Intel MID PCI PM is used or when ACPI support is disabled (through the kernel config or command line, or because there are no usable ACPI tables on the system). To address the above, rework the PCI PM code to invoke ACPI PM functions directly as needed and drop the acpi_pci_platform_pm object that is not necessary any more. Accordingly, update some of the ACPI PM functions in question to do extra checks in case the ACPI support is disabled (which previously was taken care of by avoiding to set the pci_platform_ops pointer in those cases). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-09-27PCI: PM: Do not use pci_platform_pm_ops for Intel MID PMRafael J. Wysocki1-1/+22
There are only two users of struct pci_platform_pm_ops in the tree, one of which is Intel MID PM and the other one is ACPI. They are mutually exclusive and the MID PM should take precedence when they both are enabled, but whether or not this really is the case hinges on the specific ordering of arch_initcall() calls made by them. The struct pci_platform_pm_ops abstraction is not really necessary for just these two users, but it adds complexity and overhead because of retoplines involved in using all of the function pointers in there. It also makes following the code a bit more difficult than it would be otherwise. Moreover, Intel MID PCI PM doesn't even implement the majority of the function pointers in struct pci_platform_pm_ops in a meaningful way, so switch over the PCI core to calling the relevant MID PM routines, mid_pci_set_power_state() and mid_pci_set_power_state(), directly as needed and drop mid_pci_platform_pm. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Ferry Toth <fntoth@gmail.com>
2021-09-21PCI: Rename pcibios_add_device() to pcibios_device_add()Oliver O'Halloran1-2/+2
The general convention for pcibios_* hooks is that they're named after the corresponding pci_* function they provide a hook for. The exception is pcibios_add_device() which provides a hook for pci_device_add(). Rename pcibios_add_device() to pcibios_device_add() so it matches pci_device_add(). Also, remove the export of the microblaze version. The only caller must be compiled as a built-in so there's no reason for the export. Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds1-94/+237
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-02Merge branch 'pci/misc'Bjorn Helgaas1-1/+1
- Add pci_numachip_init() declaration (Krzysztof Wilczyński) - Allocate pci_dev_str_match_path() string atomically (Dan Carpenter) - Drop error message when Precision Time Measurement supported but not enabled (Jakub Kicinski) - Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron) - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Make saved capability state private to core (Bjorn Helgaas) - Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko) - Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET) * pci/misc: x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n PCI: Make saved capability state private to core PCI: Add schedule point in proc_bus_pci_read() PCI: Correct the pci_iomap.h header guard #endif comment PCI/PTM: Remove error message at boot PCI: Fix pci_dev_str_match_path() alloc while atomic bug x86/PCI: Add pci_numachip_init() declaration # Conflicts: # include/linux/pci.h
2021-09-02Merge branch 'pci/virtualization'Bjorn Helgaas1-2/+2
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Enforce pci=noats with Transaction Blocking (Alex Williamson) * pci/virtualization: PCI/ACS: Enforce pci=noats with Transaction Blocking PCI: Add ACS quirks for Cavium multi-function devices PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
2021-09-02Merge branch 'pci/resource'Bjorn Helgaas1-12/+16
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) * pci/resource: PCI: Optimize pci_resource_len() to reduce kernel size PCI: Refactor pci_ioremap_bar() and pci_ioremap_wc_bar()
2021-08-21PCI/ACS: Enforce pci=noats with Transaction BlockingAlex Williamson1-2/+2
PCIe Address Translation Services (ATS) provides a mechanism for a device to provide an on-device caching translation agent (device IOTLB). We already have a means to disable support for this feature via the pci=noats option. For untrusted and externally facing devices, we not only disable ATS support for the device, but we use Access Control Services (ACS) Transaction Blocking to actively prevent devices from sending TLPs with non-default AT field values. Extend pci=noats to also make use of PCI_ACS_TB so that not only is ATS disabled at the device, but blocked at the downstream ports. This provides a means to further lock-down ATS for cases such as device assignment, where it may not be the hardware configuration of the device that makes it untrusted, but the driver running on the device. Link: https://lore.kernel.org/r/162404966325.2362347.12176138291577486015.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rajat Jain <rajatja@google.com>
2021-08-19PCI: Change the type of probe argument in reset functionsAmey Narkhede1-22/+22
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-19PCI: Add support for ACPI _RST reset methodShanker Donthineni1-0/+1
_RST is a standard ACPI method that performs a function level reset of a device (ACPI v6.3, sec 7.3.25). Add pci_dev_acpi_reset() to probe for _RST method and execute if present. The default priority of this reset is set to below device-specific and above hardware resets. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-9-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2021-08-19PCI: Allow userspace to query and set device reset mechanismAmey Narkhede1-0/+122
Add "reset_method" sysfs attribute to enable user to query and set preferred device reset methods and their ordering. [bhelgaas: on invalid sysfs input, return error and preserve previous config, as in earlier patch versions] Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-6-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-18PCI: Remove reset_fn field from pci_devAmey Narkhede1-3/+3
"reset_fn" indicates whether the device supports any reset mechanism. Remove the use of reset_fn in favor of the reset_methods array that tracks supported reset mechanisms of a device and their ordering. The octeon driver incorrectly used reset_fn to detect whether the device supports FLR or not. Use pcie_reset_flr() to probe whether it supports FLR. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-5-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-18PCI: Add array to track reset method orderingAmey Narkhede1-40/+54
Add reset_methods[] in struct pci_dev to keep track of reset mechanisms supported by the device and their ordering. Refactor probing and reset functions to take advantage of calling convention of reset functions. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-4-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-26/+30
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Cache PCIe Device Capabilities registerAmey Narkhede1-4/+2
Add a new member called devcap in struct pci_dev for caching the PCIe Device Capabilities register to avoid reading PCI_EXP_DEVCAP multiple times. Refactor pcie_has_flr() to use cached device capabilities. Link: https://lore.kernel.org/r/20210817180500.1253-2-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-12PCI: Fix pci_dev_str_match_path() alloc while atomic bugDan Carpenter1-1/+1
pci_dev_str_match_path() is often called with a spinlock held so the allocation has to be atomic. The call tree is: pci_specified_resource_alignment() <-- takes spin_lock(); pci_dev_str_match() pci_dev_str_match_path() Fixes: 45db33709ccc ("PCI: Allow specifying devices using a base bus and path of devfns") Link: https://lore.kernel.org/r/20210812070004.GC31863@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-08-04PCI: PM: Enable PME if it can be signaled from D3coldRafael J. Wysocki1-1/+8
PME signaling is only enabled by __pci_enable_wake() if the target device can signal PME from the given target power state (to avoid pointless reconfiguration of the device), but if the hierarchy above the device goes into D3cold, the device itself will end up in D3cold too, so if it can signal PME from D3cold, it should be enabled to do so in __pci_enable_wake(). [Note that if the device does not end up in D3cold and it cannot signal PME from the original target power state, it will not signal PME, so in that case the behavior does not change.] Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/ Fixes: 5bcc2fb4e815 ("PCI PM: Simplify PCI wake-up code") Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-08-04PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistentlyRafael J. Wysocki1-6/+10
It is inconsistent to return PCI_D0 from pci_target_state() instead of the original target state if 'wakeup' is true and the device cannot signal PME from D0. This only happens when the device cannot signal PME from the original target state and any shallower power states (including D0) and that case is effectively equivalent to the one in which PME singaling is not supported at all. Since the original target state is returned in the latter case, make the function do that in the former one too. Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/ Fixes: 666ff6f83e1d ("PCI/PM: Avoid using device_may_wakeup() for runtime PM") Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com> Reported-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-07-17PCI: Refactor pci_ioremap_bar() and pci_ioremap_wc_bar()Krzysztof Wilczyński1-12/+16
pci_ioremap_bar() and pci_ioremap_wc_bar() shared similar implementations but differed in unimportant ways. Align them by adding a shared helper, __pci_ioremap_resource(). Upgrade warning message to error level, since it indicates a driver defect. Remove WARN_ON() from WC path in favor of the error message. [bhelgaas: commit log, use ioremap() since pci_iomap_range() doesn't add anything] Link: https://lore.kernel.org/r/20210713102436.304693-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-16PCI: Use pci_update_current_state() in pci_enable_device_flags()Rafael J. Wysocki1-5/+1
Updating the current_state field of struct pci_dev the way it is done in pci_enable_device_flags() before calling do_pci_enable_device() may not work. For example, if the given PCI device depends on an ACPI power resource whose _STA method initially returns 0 ("off"), but the config space of the PCI device is accessible and the power state retrieved from the PCI_PM_CTRL register is D0, the current_state field in the struct pci_dev representing that device will get out of sync with the power.state of its ACPI companion object and that will lead to power management issues going forward. To avoid such issues, make pci_enable_device_flags() call pci_update_current_state() which takes ACPI device power management into account, if present, to retrieve the current power state of the device. Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/ Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 04:01:11 +0300