summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)AuthorFilesLines
2024-09-23Merge tag 'pci-v6.12-changes' of ↵Linus Torvalds8-122/+86
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...
2024-09-19Merge branch 'pci/misc'Bjorn Helgaas2-2/+2
- Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) * pci/misc: PCI: Fix typos PCI/VPD: Remove pci_vpd_release() unused declarations PCI/PM: Remove __pci_pme_wakeup() unused declarations PCI: Make pci_bus_type constant x86/PCI: Check pcie_find_root_port() return for NULL
2024-09-19PCI: Fix typosBjorn Helgaas2-2/+2
Fix typos. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-06PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config readsweiyufeng1-2/+2
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data from hardware. This unifies PCI error response checking and makes error checks consistent and easier to find. Link: https://lore.kernel.org/r/20240806065050.28725-1-412574090@163.com Signed-off-by: weiyufeng <weiyufeng@kylinos.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-02PCI: shpchp: Remove hpc_opsngn5-118/+82
Remove the hpc_ops struct from shpchp. This struct is unnecessary and no other hotplug controller implements it. A similar thing has already been done in pciehp with 82a9e79ef132 ("PCI: pciehp: remove hpc_ops"). Link: https://lore.kernel.org/r/Zp-XXVW4hlcMASEc@archbtw Signed-off-by: ngn <ngn@ngn.tf> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-01PCI: pciehp: Retain Power Indicator bits for userspace indicatorsBlazej Kucman1-1/+3
The sysfs "attention" file normally controls the Slot Control Attention Indicator with 0 (off), 1 (on), 2 (blink) settings. 576243b3f9ea ("PCI: pciehp: Allow exclusive userspace control of indicators") added pciehp_set_raw_indicator_status() to allow userspace to directly control all four bits in both the Attention Indicator and the Power Indicator fields via the "attention" file. This is used on Intel VMD bridges so utilities like "ledmon" can use sysfs "attention" to control up to 16 indicators for NVMe device RAID status. abaaac4845a0 ("PCI: hotplug: Use FIELD_GET/PREP()") broke this by masking the sysfs data with PCI_EXP_SLTCTL_AIC, which discards the upper two bits intended for the Power Indicator Control field (PCI_EXP_SLTCTL_PIC). For NVMe devices behind an Intel VMD, ledmon settings that use the PCI_EXP_SLTCTL_PIC bits, i.e., ATTENTION_REBUILD (0x5), ATTENTION_LOCATE (0x7), ATTENTION_FAILURE (0xD), ATTENTION_OFF (0xF), no longer worked correctly. Mask with PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC to retain both the Attention Indicator and the Power Indicator bits. Fixes: abaaac4845a0 ("PCI: hotplug: Use FIELD_GET/PREP()") Link: https://lore.kernel.org/r/20240722141440.7210-1-blazej.kucman@intel.com Signed-off-by: Blazej Kucman <blazej.kucman@intel.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v6.7+
2024-07-20Merge tag 'powerpc-6.11-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove support for 40x CPUs & platforms - Add support to the 64-bit BPF JIT for cpu v4 instructions - Fix PCI hotplug driver crash on powernv - Fix doorbell emulation for KVM on PAPR guests (nestedv2) - Fix KVM nested guest handling of some less used SPRs - Online NUMA nodes with no CPU/memory if they have a PCI device attached - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and Vaibhav Jain. * tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits) Documentation/powerpc: Mention 40x is removed powerpc: Remove 40x leftovers macintosh/therm_windtunnel: fix module unload. powerpc: Check only single values are passed to CPU/MMU feature checks powerpc/xmon: Fix disassembly CPU feature checks powerpc: Drop clang workaround for builtin constant checks powerpc64/bpf: jit support for signed division and modulo powerpc64/bpf: jit support for sign extended mov powerpc64/bpf: jit support for sign extended load powerpc64/bpf: jit support for unconditional byte swap powerpc64/bpf: jit support for 32bit offset jmp instruction powerpc/pci: Hotplug driver bridge support pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC powerpc: add missing MODULE_DESCRIPTION() macros macintosh/mac_hid: add MODULE_DESCRIPTION() KVM: PPC: add missing MODULE_DESCRIPTION() macros powerpc/kexec: Use of_property_read_reg() powerpc/64s/radix/kfence: map __kfence_pool at page granularity powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API ...
2024-07-04pci/hotplug/pnv_php: Fix hotplug driver crash on PowernvKrishna Kumar1-2/+1
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed. Reported-by: Timothy Pearson <tpearson@raptorengineering.com> Closes: https://lore.kernel.org/all/1981605666.2142272.1703742465927.JavaMail.zimbra@raptorengineeringinc.com/ Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Shawn Anastasio <sanastasio@raptorengineering.com> Signed-off-by: Krishna Kumar <krishnak@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240701074513.94873-2-krishnak@linux.ibm.com
2024-06-18PCI: acpiphp: Add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/hotplug/acpiphp_ampere_altra.o Add the missing MODULE_DESCRIPTION(). Link: https://lore.kernel.org/r/20240612-md-drivers-pci-hotplug-v1-1-2b30d14d783d@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-30PCI: pciehp: Detect device replacement during system sleepLukas Wunner4-1/+54
Ricky reports that replacing a device in a hotplug slot during ACPI sleep state S3 does not cause re-enumeration on resume, as one would expect. Instead, the new device is treated as if it was the old one. There is no bulletproof way to detect device replacement, but as a heuristic, check whether the device identity in config space matches cached data in struct pci_dev (Vendor ID, Device ID, Class Code, Revision ID, Subsystem Vendor ID, Subsystem ID). Additionally, cache and compare the Device Serial Number (PCIe r6.2 sec 7.9.3). If a mismatch is detected, mark the old device disconnected (to prevent its driver from accessing the new device) and synthesize a Presence Detect Changed event. The device identity in config space which is compared here is the same as the one included in the signed Subject Alternative Name per PCIe r6.1 sec 6.31.3. Thus, the present commit prevents attacks where a valid device is replaced with a malicious device during system sleep and the valid device's driver obliviously accesses the malicious device. This is about as much as can be done at the PCI layer. Drivers may have additional ways to identify devices (such as reading a WWID from some register) and may trigger re-enumeration when detecting an identity change on resume. Link: https://lore.kernel.org/r/a1afaa12f341d146ecbea27c1743661c71683833.1716992815.git.lukas@wunner.de Reported-by: Ricky Wu <ricky_wu@realtek.com> Closes: https://lore.kernel.org/r/a608b5930d0a48f092f717c0e137454b@realtek.com Tested-by: Ricky Wu <ricky_wu@realtek.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-04PCI: hotplug: Remove obsolete sgi_hotplug TODO notesNam Cao1-8/+0
Commit c7532b601e77 ("PCI/hotplug: remove the sgi_hotplug driver") deleted the driver. Remove the remaining TODO notes as well. Link: https://lore.kernel.org/r/26784ee39fbb3fbd0fe96508158d74419018e6ad.1714762038.git.namcao@linutronix.de Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-04PCI: hotplug: Document unchecked return value of pci_hp_add_bridge()Nam Cao1-0/+6
Some hotplug drivers do not check the return value of pci_hp_add_bridge(). This may be problematic if the driver proceeds after pci_hp_add_bridge() fails. Link: https://lore.kernel.org/r/16a2442ea6ee896987a44df3ed509e4cfde44475.1714762038.git.namcao@linutronix.de Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-02-20s390/pci: introduce lock to synchronize state of zpci_dev'sGerd Bayer1-22/+43
There's a number of tasks that need the state of a zpci device to be stable. Other tasks need to be synchronized as they change the state. State changes could be generated by the system as availability or error events, or be requested by the user through manipulations in sysfs. Some other actions accessible through sysfs - like device resets - need the state to be stable. Unsynchronized state handling could lead to unusable devices. This has been observed in cases of concurrent state changes through systemd udev rules and DPM boot control. Some breakage can be provoked by artificial tests, e.g. through repetitively injecting "recover" on a PCI function through sysfs while running a "hotplug remove/add" in a loop through a PCI slot's "power" attribute in sysfs. After a few iterations this could result in a kernel oops. So introduce a new mutex "state_lock" to guard the state property of the struct zpci_dev. Acquire this lock in all task that modify the state: - hotplug add and remove, through the PCI hotplug slot entry, - avaiability events, as reported by the platform, - error events, as reported by the platform, - during device resets, explicit through sysfs requests or implict through the common PCI layer. Break out an inner _do_recover() routine out of recover_store() to separte the necessary synchronizations from the actual manipulations of the zpci_dev required for the reset. With the following changes I was able to run the inject loops for hours without hitting an error. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-12-15Revert "PCI: acpiphp: Reassign resources on bridge if necessary"Bjorn Helgaas1-6/+3
This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang <dongli.zhang@oracle.com> Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe <jwoithe@just42.net> Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Cc: <stable@vger.kernel.org>
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas3-4/+7
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-28Merge branch 'pci/hotplug'Bjorn Helgaas4-2/+141
- Add driver for Ampere Altra Attention Indicators (D Scott Phillips) * pci/hotplug: PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI: acpiphp: Allow built-in drivers for Attention Indicators
2023-10-26PCI: hotplug: Add Ampere Altra Attention Indicator extension driverD Scott Phillips3-0/+140
On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is also present to request system firmware control of the hotplug Attention Indicators. Add an ACPI PCI Hotplug companion driver to support Attention Indicator control. Link: https://lore.kernel.org/r/20230930002036.6491-2-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> [bhelgaas: mask domain to low 4 bits] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
2023-10-25PCI: acpiphp: Allow built-in drivers for Attention IndicatorsD Scott Phillips1-2/+1
Since the introduction of the attention callback in acpiphp, a non-zero struct module *owner has been required in acpiphp_register_attention(). The intent seemed to be that the core code could hold a refcount on the module while invoking a callback. This check accidentally precludes the possibility of attention callbacks to built-in drivers. Remove the check on `struct module *owner` in acpiphp_register_attention() so attention callbacks can also be registered from built-in drivers. Link: https://lore.kernel.org/r/20230930002036.6491-1-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI: hotplug: Use FIELD_GET/PREP()Ilpo Järvinen3-4/+7
Instead of handcrafted shifts to handle register fields, use FIELD_GET/FIELD_PREP(). Link: https://lore.kernel.org/r/20231018113254.17616-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-03PCI: Use PCI_HEADER_TYPE_* instead of literalsIlpo Järvinen4-17/+18
Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for Renesas R-Car
2023-08-31Merge tag 'powerpc-6.6-1' of ↵Linus Torvalds1-3/+82
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the configured SMT state when hotplugging CPUs into the system - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix MMU to avoid a broadcast TLBIE flush on exit - Drop the exclusion between ptrace/perf watchpoints, and drop the now unused associated arch hooks - Add support for the "nohlt" command line option to disable CPU idle - Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1 - Rework memory block size determination, and support 256MB size on systems with GPUs that have hotpluggable memory - Various other small features and fixes Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai. * tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits) macintosh/ams: linux/platform_device.h is needed powerpc/xmon: Reapply "Relax frame size for clang" powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled powerpc/iommu: Fix notifiers being shared by PCI and VIO buses powerpc/mpc5xxx: Add missing fwnode_handle_put() powerpc/config: Disable SLAB_DEBUG_ON in skiroot powerpc/pseries: Remove unused hcall tracing instruction powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n powerpc: dts: add missing space before { powerpc/eeh: Use pci_dev_id() to simplify the code powerpc/64s: Move CPU -mtune options into Kconfig powerpc/powermac: Fix unused function warning powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT powerpc: Don't include lppaca.h in paca.h powerpc/pseries: Move hcall_vphn() prototype into vphn.h powerpc/pseries: Move VPHN constants into vphn.h cxl: Drop unused detach_spa() powerpc: Drop zalloc_maybe_bootmem() powerpc/powernv: Use struct opal_prd_msg in more places ...
2023-08-31Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds5-19/+8
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas3-5/+0
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-29Merge branch 'pci/pcie-rmw'Bjorn Helgaas1-9/+3
- Add locking for read/modify/write PCIe Capability Register accessors for Link Control and Root Control (Ilpo Järvinen) - Use PCIe RMW accessors for Link Control updates in PCI core, pciehp, amdgpu, radeon, mlx5, ath10k, ath11k, ath12k (Ilpo Järvinen) - Convert PCIBIOS error values in mlx5 to generic errnos (Ilpo Järvinen) - Simplify pcie_capability_clear_and_set_word() control flow (Bjorn Helgaas) * pci/pcie-rmw: PCI: Simplify pcie_capability_clear_and_set_word() control flow net/mlx5: Convert PCI error values to generic errnos PCI: Document the Capability accessor RMW improvements wifi: ath10k: Use RMW accessors for changing LNKCTL wifi: ath12k: Use RMW accessors for changing LNKCTL wifi: ath11k: Use RMW accessors for changing LNKCTL net/mlx5: Use RMW accessors for changing LNKCTL drm/radeon: Use RMW accessors for changing LNKCTL drm/amdgpu: Use RMW accessors for changing LNKCTL PCI/ASPM: Use RMW accessors for changing LNKCTL PCI: pciehp: Use RMW accessors for changing LNKCTL PCI: Make link retraining use RMW accessors for changing LNKCTL PCI: Add locking to RMW PCI Express Capability Register accessors
2023-08-24PCI: Remove unused function declarationsYue Haibing3-5/+0
The following declarations have never been implemented since the beginning of git history, so remove them: u8 acpiphp_get_attention_status(struct acpiphp_slot *slot); u8 cpci_get_latch_status(struct slot *slot); u8 cpci_get_adapter_status(struct slot *slot); int ibmphp_get_total_hp_slots(void); void ibmphp_free_ibm_slot(struct slot *); void pdev_enable_device(struct pci_dev *); Link: https://lore.kernel.org/r/20230811095933.28652-1-yuehaibing@huawei.com Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-08-18PCI: rpaphp: Error out on busy status from get-sensor-stateMahesh Salgaonkar1-3/+82
When certain PHB HW failure causes pHyp to recover PHB, it marks the PE state as temporarily unavailable until recovery is complete. This also triggers an EEH handler in Linux which needs to notify drivers, and perform recovery. But before notifying the driver about the PCI error it uses get_adapter_status()->rpaphp_get_sensor_state()->rtas_call(get-sensor-state) operation of the hotplug_slot to determine if the slot contains a device or not. If the slot is empty, the recovery is skipped entirely. eeh_event_handler() ->eeh_handle_normal_event() ->eeh_slot_presence_check() ->get_adapter_status() ->rpaphp_get_sensor_state() ->rtas_get_sensor() ->rtas_call(get-sensor-state) However on certain PHB failures, the RTAS call rtas_call(get-sensor-state) returns extended busy error (9902) until PHB is recovered by pHyp. Once PHB is recovered, the rtas_call(get-sensor-state) returns success with correct presence status. The RTAS call interface rtas_get_sensor() loops over the RTAS call on extended delay return code (9902) until the return value is either success (0) or error (-1). This causes the EEH handler to get stuck for ~6 seconds before it could notify that the PCI error has been detected and stop any active operations. Hence with running I/O traffic, during this 6 seconds, the network driver continues its operation and hits a timeout (netdev watchdog). ------------ [52732.244731] DEBUG: ibm_read_slot_reset_state2() [52732.244762] DEBUG: ret = 0, rets[0]=5, rets[1]=1, rets[2]=4000, rets[3]=> [52732.244798] DEBUG: in eeh_slot_presence_check [52732.244804] DEBUG: error state check [52732.244807] DEBUG: Is slot hotpluggable [52732.244810] DEBUG: hotpluggable ops ? [52732.244953] DEBUG: Calling ops->get_adapter_status [52732.244958] DEBUG: calling rpaphp_get_sensor_state [52736.564262] ------------[ cut here ]------------ [52736.564299] NETDEV WATCHDOG: enP64p1s0f3 (tg3): transmit queue 0 timed o> [52736.564324] WARNING: CPU: 1442 PID: 0 at net/sched/sch_generic.c:478 dev> [...] [52736.564505] NIP [c000000000c32368] dev_watchdog+0x438/0x440 [52736.564513] LR [c000000000c32364] dev_watchdog+0x434/0x440 ------------ On timeouts, network driver starts dumping debug information to console (e.g bnx2 driver calls bnx2x_panic_dump()), and go into recovery path while pHyp is still recovering the PHB. As part of recovery, the driver tries to reset the device and it keeps failing since every PCI read/write returns ff's. And when EEH recovery kicks-in, the driver is unable to recover the device. This impacts the ssh connection and leads to the system being inaccessible. To get the NIC working again it needs a reboot or re-assign the I/O adapter from HMC. [ 9531.168587] EEH: Beginning: 'slot_reset' [ 9531.168601] PCI 0013:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() [...] [ 9614.110094] bnx2x: [bnx2x_func_stop:9129(enP19p1s0f0)]FUNC_STOP ramrod failed. Running a dry transaction [ 9614.110300] bnx2x: [bnx2x_igu_int_disable:902(enP19p1s0f0)]BUG! Proper val not read from IGU! [ 9629.178067] bnx2x: [bnx2x_fw_command:3055(enP19p1s0f0)]FW failed to respond! [ 9629.178085] bnx2x 0013:01:00.0 enP19p1s0f0: bc 7.10.4 [ 9629.178091] bnx2x: [bnx2x_fw_dump_lvl:789(enP19p1s0f0)]Cannot dump MCP info while in PCI error [ 9644.241813] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f0)]IO slot reset --> driver unload [...] [ 9644.241819] PCI 0013:01:00.0#10000: EEH: bnx2x driver reports: 'disconnect' [ 9644.241823] PCI 0013:01:00.1#10000: EEH: Invoking bnx2x->slot_reset() [ 9644.241827] bnx2x: [bnx2x_io_slot_reset:14229(enP19p1s0f1)]IO slot reset initializing... [ 9644.241916] bnx2x 0013:01:00.1: enabling device (0140 -> 0142) [ 9644.258604] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f1)]IO slot reset --> driver unload [ 9644.258612] PCI 0013:01:00.1#10000: EEH: bnx2x driver reports: 'disconnect' [ 9644.258615] EEH: Finished:'slot_reset' with aggregate recovery state:'disconnect' [ 9644.258620] EEH: Unable to recover from failure from PHB#13-PE#10000. [ 9644.261811] EEH: Beginning: 'error_detected(permanent failure)' [...] [ 9644.261823] EEH: Finished:'error_detected(permanent failure)' Hence, it becomes important to inform driver about the PCI error detection as early as possible, so that driver is aware of PCI error and waits for EEH handler's next action for successful recovery. Current implementation uses rtas_get_sensor() API which blocks the slot check state until RTAS call returns success. To avoid this, fix the PCI hotplug driver (rpaphp) to return an error (-EBUSY) if the slot presence state can not be detected immediately while PE is in EEH recovery state. Change rpaphp_get_sensor_state() to invoke rtas_call(get-sensor-state) directly only if the respective PE is in EEH recovery state, and take actions based on RTAS return status. This way EEH handler will not be blocked on rpaphp_get_sensor_state() and can immediately notify driver about the PCI error and stop any active operations. In normal cases (non-EEH case) rpaphp_get_sensor_state() will continue to invoke rtas_get_sensor() as it was earlier with no change in existing behavior. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/169235815601.193557.13989873835811325343.stgit@jupiter
2023-08-10PCI: pciehp: Use RMW accessors for changing LNKCTLIlpo Järvinen1-9/+3
As hotplug is not the only driver touching LNKCTL, use the RMW capability accessor which handles concurrent changes correctly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions") Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
2023-08-08PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root busIgor Mammedov1-1/+7
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources() which depends on bridge being available, however enable_slot() can be called without bridge associated: 1. Legitimate case of hotplug on root bus (widely used in virt world) 2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at enable_slot(..., bridge = 0) where bus has no bridge assigned to it. acpihp doesn't know that it's a bridge, and bus specific 'PCI subsystem' can't augment ACPI context with bridge information since the PCI device to get this data from is/was not available. Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is installed on sda1 partition): # qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \ -monitor stdio -serial file:serial.log \ -kernel arch/x86/boot/bzImage \ -append "root=/dev/sda1 console=ttyS0" \ guest_disk.img Once guest OS is fully booted at qemu prompt: (qemu) device_add e1000 (check serial.log) it will cause NULL pointer dereference at: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; BUG: kernel NULL pointer dereference, address: 0000000000000018 ? pci_assign_unassigned_bridge_resources+0x1f/0x260 enable_slot+0x21f/0x3e0 acpiphp_hotplug_notify+0x13d/0x260 acpi_device_hotplug+0xbc/0x540 acpi_hotplug_work_fn+0x15/0x20 process_one_work+0x1f7/0x370 worker_thread+0x45/0x3b0 The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following sequence: 1. Suspend to RAM 2. Wake up with the same backtrace being observed: 3. 2nd suspend to RAM attempt makes laptop freeze Fix it by using __pci_bus_assign_resources() instead of pci_assign_unassigned_bridge_resources() as we used to do, but only in case when bus doesn't have a bridge associated (to cover for the case of ACPI event on hostbridge or non existing root port). That lets us keep hotplug on root bus working like it used to and at the same time keeps resource reassignment usable on root ports (and other 1st level bridges) that was fixed by 40613da52b13. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com Reported-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-19PCI: ibmphp: Make read-only arrays staticColin Ian King1-5/+5
Don't populate the arrays on the stack; instead make them static const. Link: https://lore.kernel.org/r/20230627125612.724764-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-26Merge branch 'pci/hotplug'Bjorn Helgaas3-14/+17
- Simplify Attention Button logging (Bjorn Helgaas) - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely (Rongguang Wei) - Reassign bridge resources if necessary for ACPI hotplug (Igor Mammedov) * pci/hotplug: PCI: acpiphp: Reassign resources on bridge if necessary PCI: pciehp: Cancel bringup sequence if card is not present PCI: pciehp: Simplify Attention Button logging
2023-06-15PCI: pciehp: Rely on dev->link_active_reportingMaciej W. Rozycki1-5/+2
Use dev->link_active_reporting to determine whether Data Link Layer Link Active Reporting is available rather than re-retrieving the capability. Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310028150.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2023-05-24PCI: acpiphp: Reassign resources on bridge if necessaryIgor Mammedov1-4/+1
When using ACPI PCI hotplug, hotplugging a device with large BARs may fail if bridge windows programmed by firmware are not large enough. Reproducer: $ qemu-kvm -monitor stdio -M q35 -m 4G \ -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \ -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \ disk_image wait till linux guest boots, then hotplug device: (qemu) device_add qxl,bus=rp1 hotplug on guest side fails with: pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f] pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff] pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f] qxl 0000:01:00.0: enabling device (0000 -> 0003) Unable to create vram_mapping qxl: probe of 0000:01:00.0 failed with error -12 However when using native PCIe hotplug '-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off' it works fine, since kernel attempts to reassign unused resources. Use the same machinery as native PCIe hotplug to (re)assign resources. Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org
2023-05-24PCI: pciehp: Cancel bringup sequence if card is not presentRongguang Wei1-0/+8
If a PCIe hotplug slot has an Attention Button, the normal hot-add flow is: - Slot is empty and slot power is off - User inserts card in slot and presses Attention Button - OS blinks Power Indicator for 5 seconds - After 5 seconds, OS turns on Power Indicator, turns on slot power, and enumerates the device Previously, if a user pressed the Attention Button on an *empty* slot, pciehp logged the following messages and blinked the Power Indicator until a second button press: [0.000] pciehp: Button press: will power on in 5 sec [0.001] # Power Indicator starts blinking [5.001] # 5 second timeout; slot is empty, so we should cancel the request to power on and turn off Power Indicator [7.000] # Power Indicator still blinking [8.000] # possible card insertion [9.000] pciehp: Button press: canceling request to power on The first button press incorrectly left the slot in BLINKINGON_STATE, so the second was interpreted as a "cancel power on" event regardless of whether a card was present. If the slot is empty, turn off the Power Indicator and return from BLINKINGON_STATE to OFF_STATE after 5 seconds, effectively canceling the request to power on. Putting the slot in OFF_STATE also means the second button press will correctly request a slot power on if the slot is occupied. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20230512021518.336460-1-clementwei90@163.com Fixes: d331710ea78f ("PCI: pciehp: Become resilient to missed events") Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2023-05-24PCI: pciehp: Simplify Attention Button loggingBjorn Helgaas2-10/+8
Previously, pressing the Attention Button always logged two lines, the first from pciehp_ist() and the second from pciehp_handle_button_press(): Attention button pressed Powering on due to button press Since pciehp_handle_button_press() always logs the more detailed message, remove the generic "Attention button pressed" message. Reword the pciehp_handle_button_press() to be of the form: Button press: will power on in 5 sec Button press: will power off in 5 sec Button press: canceling request to power on Button press: canceling request to power off Button press: ignoring invalid state %#x Link: https://lore.kernel.org/r/20230522214051.619337-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2023-04-21Merge branch 'pci/resource'Bjorn Helgaas1-4/+4
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators to simplify loops (Andy Shevchenko) * pci/resource: EISA: Drop unused pci_bus_for_each_resource() index argument PCI: Make pci_bus_for_each_resource() index optional PCI: Document pci_bus_for_each_resource() PCI: Introduce pci_dev_for_each_resource() PCI: Introduce pci_resource_n()
2023-04-21Merge branch 'pci/hotplug'Bjorn Helgaas1-0/+15
- Fix pciehp AB-BA deadlock between reset_lock and device_lock (Lukas Wunner) * pci/hotplug: PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
2023-04-19PCI: Use of_property_present() for testing DT property presenceRob Herring1-2/+2
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property()/of_find_property() functions for reading properties. As part of this, convert of_get_property()/of_find_property() calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Link: https://lore.kernel.org/r/20230310144719.1544443-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # pcie-mediatek
2023-04-11PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lockLukas Wunner1-0/+15
In 2013, commits 2e35afaefe64 ("PCI: pciehp: Add reset_slot() method") 608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()") amended PCIe hotplug to mask Presence Detect Changed events during a Secondary Bus Reset. The reset thus no longer causes gratuitous slot bringdown and bringup. However the commits neglected to serialize reset with code paths reading slot registers. For instance, a slot bringup due to an earlier hotplug event may see the Presence Detect State bit cleared during a concurrent Secondary Bus Reset. In 2018, commit 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset") retrofitted the missing locking. It introduced a reset_lock which serializes a Secondary Bus Reset with other parts of pciehp. Unfortunately the locking turns out to be overzealous: reset_lock is held for the entire enumeration and de-enumeration of hotplugged devices, including driver binding and unbinding. Driver binding and unbinding acquires device_lock while the reset_lock of the ancestral hotplug port is held. A concurrent Secondary Bus Reset acquires the ancestral reset_lock while already holding the device_lock. The asymmetric locking order in the two code paths can lead to AB-BA deadlocks. Michael Haeuptle reports such deadlocks on simultaneous hot-removal and vfio release (the latter implies a Secondary Bus Reset): pciehp_ist() # down_read(reset_lock) pciehp_handle_presence_or_link_change() pciehp_disable_slot() __pciehp_disable_slot() remove_board() pciehp_unconfigure_device() pci_stop_and_remove_bus_device() pci_stop_bus_device() pci_stop_dev() device_release_driver() device_release_driver_internal() __device_driver_lock() # device_lock() SYS_munmap() vfio_device_fops_release() vfio_device_group_close() vfio_device_close() vfio_device_last_close() vfio_pci_core_close_device() vfio_pci_core_disable() # device_lock() __pci_reset_function_locked() pci_reset_bus_function() pci_dev_reset_slot_function() pci_reset_hotplug_slot() pciehp_reset_slot() # down_write(reset_lock) Ian May reports the same deadlock on simultaneous hot-removal and an AER-induced Secondary Bus Reset: aer_recover_work_func() pcie_do_recovery() aer_root_reset() pci_bus_error_reset() pci_slot_reset() pci_slot_lock() # device_lock() pci_reset_hotplug_slot() pciehp_reset_slot() # down_write(reset_lock) Fix by releasing the reset_lock during driver binding and unbinding, thereby splitting and shrinking the critical section. Driver binding and unbinding is protected by the device_lock() and thus serialized with a Secondary Bus Reset. There's no need to additionally protect it with the reset_lock. However, pciehp does not bind and unbind devices directly, but rather invokes PCI core functions which also perform certain enumeration and de-enumeration steps. The reset_lock's purpose is to protect slot registers, not enumeration and de-enumeration of hotplugged devices. That would arguably be the job of the PCI core, not the PCIe hotplug driver. After all, an AER-induced Secondary Bus Reset may as well happen during boot-time enumeration of the PCI hierarchy and there's no locking to prevent that either. Exempting *de-enumeration* from the reset_lock is relatively harmless: A concurrent Secondary Bus Reset may foil config space accesses such as PME interrupt disablement. But if the device is physically gone, those accesses are pointless anyway. If the device is physically present and only logically removed through an Attention Button press or the sysfs "power" attribute, PME interrupts as well as DMA cannot come through because pciehp_unconfigure_device() disables INTx and Bus Master bits. That's still protected by the reset_lock in the present commit. Exempting *enumeration* from the reset_lock also has limited impact: The exempted call to pci_bus_add_device() may perform device accesses through pcibios_bus_add_device() and pci_fixup_device() which are now no longer protected from a concurrent Secondary Bus Reset. Otherwise there should be no impact. In essence, the present commit seeks to fix the AB-BA deadlocks while still retaining a best-effort reset protection for enumeration and de-enumeration of hotplugged devices -- until a general solution is implemented in the PCI core. Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590 Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset") Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com> Reported-by: Ian May <ian.may@canonical.com> Reported-by: Andrey Grodzovsky <andrey2805@gmail.com> Reported-by: Rahul Kumar <rahul.kumar1@amd.com> Reported-by: Jialin Zhang <zhangjialin11@huawei.com> Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Dan Stein <dstein@hpe.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Alex Michon <amichon@kalrayinc.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-04-05PCI: Make pci_bus_for_each_resource() index optionalAndy Shevchenko1-4/+4
Refactor pci_bus_for_each_resource() in the same way as pci_dev_for_each_resource(). This allows the index to be hidden inside the implementation so the caller can omit it when it's not used otherwise. No functional changes intended. Link: https://lore.kernel.org/r/20230330162434.35055-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-22Merge branch 'pci/kbuild'Bjorn Helgaas2-2/+0
- Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe will complain about them (Nick Alcock) * pci/kbuild: PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
2023-02-17PCI: Remove MODULE_LICENSE so boolean drivers don't look like modulesNick Alcock2-2/+0
Since 8b41fc4454e3 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, MODULE_LICENSE in non-modules causes modprobe to misidentify the object file as a module when it is not, and modprobe might succeed rather than failing with a suitable error message. For tristate modules that can be either built-in or loaded at runtime, modprobe succeeds in both cases: # modprobe ext4 [exit status zero if CONFIG_EXT4_FS=y or =m] For boolean modules like the Standard Hot Plug Controller driver (shpchp) that cannot be loaded at runtime, modprobe should always fail like this: # modprobe shpchp modprobe: FATAL: Module shpchp not found in directory /lib/modules/... [exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC] but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so "modprobe shpchp" silently succeeded when it should have failed. Remove MODULE_LICENSE in files that cannot be built as modules. [bhelgaas: commit log, squash] Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/ Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com> Cc: Rob Herring <robh@kernel.org> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-02-14PCI: pciehp: Add Qualcomm quirk for Command Completed erratumManivannan Sadhasivam1-0/+2
The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. This results in timeouts like below during boot and resume from suspend: pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) ... pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago) Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits. Link: https://lore.kernel.org/r/20230213144922.89982-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-12-07PCI: pciehp: Enable Command Completed Interrupt only if supportedPali Rohár1-1/+3
The No Command Completed Support bit in the Slot Capabilities register indicates whether Command Completed Interrupt Enable is unsupported. We already check whether No Command Completed Support bit is set in pcie_wait_cmd(), and do not wait in this case. Don't enable this Command Completed Interrupt at all if NCCS is set, so that when users dump configuration space from userspace, the dump does not confuse them by saying that Command Completed Interrupt is not supported, but it is enabled. Link: https://lore.kernel.org/r/20220927141926.8895-2-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2022-11-22PCI: shpchp: Remove unused get_mode1_ECC_cap callbackIan Cowan3-22/+0
The ->get_mode1_ECC_cap callback in the shpchp_hpc_ops struct is never called, so remove it. [bhelgaas: squash] Link: https://lore.kernel.org/r/20221112142859.319733-2-ian@linux.cowan.aero Link: https://lore.kernel.org/r/20221112142859.319733-3-ian@linux.cowan.aero Link: https://lore.kernel.org/r/20221112142859.319733-4-ian@linux.cowan.aero Signed-off-by: Ian Cowan <ian@linux.cowan.aero> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-22PCI: acpiphp: Avoid setting is_hotplug_bridge for PCIe Upstream PortsRafael J. Wysocki1-0/+8
It is reported that on some systems pciehp binds to an Upstream Port and attempts to operate it which causes devices below the Port to disappear from the bus. This happens because acpiphp sets dev->is_hotplug_bridge for that Port (after receiving a Device Check notification on it from the platform firmware via ACPI) during the enumeration of PCI devices. get_port_device_capability() sees that dev->is_hotplug_bridge is set and adds PCIE_PORT_SERVICE_HP to Port services, which allows pciehp to bind to the Port in question. Even though this particular problem can be addressed by making the portdrv_core checks more robust, it also causes power management to work differently on the affected systems which generally is not desirable (PCIe Ports with dev->is_hotplug_bridge set have to pass additional tests to be allowed to go into the D3hot/cold power states which affects runtime PM of devices below these Ports). For this reason, amend check_hotplug_bridge() with a PCIe type check to prevent it from setting dev->is_hotplug_bridge for Upstream Ports. Suggested-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/2262230.ElGaqSPkdT@kreacher Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2022-11-15PCI: pciehp: Enable by default if USB4 enabledAlbert Zhou1-0/+3
Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. Enable pciehp by default if USB4 is enabled. [bhelgaas: squash, update subject, commit logs, tidy whitespace] Link: https://lore.kernel.org/r/20221115113857.35800-2-albert.zhou.50@gmail.com Link: https://lore.kernel.org/r/20221115113857.35800-3-albert.zhou.50@gmail.com Signed-off-by: Albert Zhou <albert.zhou.50@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-04-05PCI: hotplug: Clean up include filesChristophe Leroy5-0/+6
arch/powerpc/include/asm/prom.h includes some headers that it doesn't need itself. Add the missing headers to files that include prom.h so we can remove them from prom.h. Link: https://lore.kernel.org/r/79201f5fae8d003164ac36ed3be7789db1bc5ab4.1648833421.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-03-25Merge tag 'pci-v5.18-changes' of ↵Linus Torvalds9-29/+20
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
2022-03-23Merge branch 'pci/misc'Bjorn Helgaas5-23/+8
- Update the aer-inject URL (Yicong Yang) - Declare pci_filp_private only when HAVE_PCI_MMAP to avoid unused struct definition (Krzysztof Wilczyński) - Remove unused assignments (Bjorn Helgaas) - Add #includes to asm/pci_x86.h to prevent build errors (Randy Dunlap) * pci/misc: x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI/AER: Update aer-inject URL
2022-03-23Merge branch 'pci/hotplug'Bjorn Helgaas1-0/+4
- Clear pciehp cmd_busy bit when command completes in polling mode to avoid spurious timeouts (Liguang Zhang) - Add quirk to work around Qualcomm hardware defect in Command Completed signaling (Manivannan Sadhasivam) * pci/hotplug: PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: pciehp: Clear cmd_busy bit in polling mode
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-10 23:25:35 +0300