summaryrefslogtreecommitdiff
path: root/drivers/pci/host/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-01-21Merge tag 'pci-v4.5-changes' of ↵Linus Torvalds1-9/+27
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2016-01-15Merge branches 'pci/host', 'pci/host-designware', 'pci/host-hisi', ↵Bjorn Helgaas1-2/+13
'pci/host-qcom' and 'pci/host-rcar' into next * pci/host: PCI: host: Add of_pci_get_host_bridge_resources() stub PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD * pci/host-designware: PCI: designware: Make config accessor override checking symmetric PCI: designware: Simplify control flow * pci/host-hisi: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers * pci/host-qcom: ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: qcom: Add Qualcomm PCIe controller driver PCI: qcom: Document PCIe devicetree bindings PCI: designware: Ensure ATU is enabled before IO/conf space accesses * pci/host-rcar: PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
2016-01-08PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllersGabriele Paoloni1-2/+3
Add support for the HiSilicon Hip06 SoC. Documentation has been updated to include Hip06. Add Gabriele Paoloni as maintainer of the driver. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
2016-01-08PCI: dra7xx: Mark driver as brokenRichard Cochran1-0/+1
Mark the dra7xx PCI host driver as broken. This driver was first merged in v3.17 and has never worked. Although the driver compiles just fine, it is missing an essential device reset. If the driver is included, the kernel locks up hard shortly after booting, before any console output appears. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-07Merge branches 'pci/host-generic', 'pci/host-imx6', 'pci/host-iproc' and ↵Bjorn Helgaas1-7/+14
'pci/host-rcar' into next * pci/host-generic: PCI: generic,versatile: Remove unused pci_sys_data structures * pci/host-imx6: PCI: imx6: Add support for active-low reset GPIO PCI: imx6: Use gpio_set_value_cansleep() * pci/host-iproc: PCI: iproc: Add iProc PCIe MSI support PCI: iproc: Add iProc PCIe MSI device tree binding PCI: iproc: Add PAXC interface support PCI: iproc: Update iProc PCIe device tree binding PCI: iproc: Do not use 0x in front of %pap PCI: iproc: Hide CONFIG_PCIE_IPROC * pci/host-rcar: PCI: rcar: Add gen2 fallback compatibility string for pcie-rcar PCI: rcar: Add gen2 fallback compatibility string for pci-rcar-gen2 PCI: rcar: Add support for R-Car H3 to pcie-rcar Revert "PCI: rcar: Build pcie-rcar.c only on ARM" PCI: rcar: Convert to DT resource parsing API PCI: rcar: Allow DT to override default window settings
2016-01-07PCI: iproc: Add iProc PCIe MSI supportRay Jui1-0/+10
Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based platforms. The iProc PCIe MSI support deploys an event queue-based implementation. Each event queue is serviced by a GIC interrupt and can support up to 64 MSI vectors. Host memory is allocated for the event queues, and each event queue consists of 64 word-sized entries. MSI data is written to the lower 16-bit of each entry, whereas the upper 16-bit of the entry is reserved for the controller for internal processing. Each event queue is tracked by a head pointer and tail pointer. Head pointer indicates the next entry in the event queue to be processed by the driver and is updated by the driver after processing is done. The controller uses the tail pointer as the next MSI data insertion point. The controller ensures MSI data is flushed to host memory before updating the tail pointer and then triggering the interrupt. MSI IRQ affinity is supported by evenly distributing the interrupts to each CPU core. MSI vector is moved from one GIC interrupt to another in order to steer to the target CPU. Therefore, the actual number of supported MSI vectors is: M * 64 / N where M denotes the number of GIC interrupts (event queues), and N denotes the number of CPU cores. This iProc event queue-based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its). [bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-06PCI: qcom: Add Qualcomm PCIe controller driverStanimir Varbanov1-0/+10
The PCIe driver reuses the Designware common code for host and MSI initialization, and also programs the Qualcomm application specific registers. [bhelgaas: remove COMPILE_TEST Kconfig dependency] Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-12-09Revert "PCI: rcar: Build pcie-rcar.c only on ARM"Phil Edworthy1-2/+1
Now that we can build on arm64, revert commit 7c537c67d2e4 ("PCI: rcar: Build pcie-rcar.c only on ARM"). Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-25PCI: iproc: Hide CONFIG_PCIE_IPROCArnd Bergmann1-5/+3
PCIE_IPROC_BCMA does not require CONFIG_OF in Kconfig, but CONFIG_PCIE_IPROC does, so we can get a warning when building for an ARM platform without DT support: warning: (PCIE_IPROC_PLATFORM && PCIE_IPROC_BCMA) selects PCIE_IPROC which has unmet direct dependencies (PCI && OF && (ARM || ARM64)) It turns out that CONFIG_PCIE_IPROC never needs to be enabled by a user anyway, we can simply rely on it being selected implictly through either PCIE_IPROC_PLATFORM or PCIE_IPROC_BCMA. Fixes: 4785ffbdc9b5 ("PCI: iproc: Add BCMA PCIe driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
2015-11-03Merge branch 'pci/host-layerscape' into nextBjorn Helgaas1-1/+1
* pci/host-layerscape: PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link()
2015-11-03Merge branch 'pci/host-hisi' into nextBjorn Helgaas1-0/+8
* pci/host-hisi: PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
2015-11-03Merge branches 'pci/host-altera', 'pci/host-designware', 'pci/host-generic', ↵Bjorn Helgaas1-2/+21
'pci/host-imx6', 'pci/host-iproc', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra' and 'pci/host-xgene' into next * pci/host-altera: PCI: altera: Add Altera PCIe MSI driver PCI: altera: Add Altera PCIe host controller driver ARM: Add msi.h to Kbuild * pci/host-designware: PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage PCI: designware: Set up high part of MSI target address PCI: designware: Make get_msi_addr() return phys_addr_t, not u32 PCI: designware: Implement multivector MSI IRQ setup PCI: designware: Factor out MSI msg setup PCI: Add msi_controller setup_irqs() method for special multivector setup PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK * pci/host-generic: PCI: generic: Fix address window calculation for non-zero starting bus PCI: generic: Pass starting bus number to pci_scan_root_bus() PCI: generic: Allow multiple hosts with different map_bus() methods arm64: dts: Drop linux,pci-probe-only from the Seattle DTS powerpc/PCI: Fix lookup of linux,pci-probe-only property PCI: generic: Fix lookup of linux,pci-probe-only property of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only" * pci/host-imx6: PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition PCI: imx6: Return real error code from imx6_add_pcie_port() * pci/host-iproc: PCI: iproc: Fix header comment "Corporation" misspelling PCI: iproc: Add outbound mapping support PCI: iproc: Update PCIe device tree bindings PCI: iproc: Improve link detection logic PCI: iproc: Fix PCIe reset logic PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM PCI: iproc: Remove unused struct iproc_pcie.irqs[] PCI: iproc: Fix code comment to match code * pci/host-mvebu: PCI: mvebu: Remove code restricting accesses to slot 0 PCI: mvebu: Add PCI Express root complex capability block PCI: mvebu: Improve clock/reset handling PCI: mvebu: Use gpio_desc to carry around gpio PCI: mvebu: Use devm_kcalloc() to allocate an array PCI: mvebu: Use gpio_set_value_cansleep() PCI: mvebu: Split port parsing and resource claiming from port setup PCI: mvebu: Fix memory leaks and refcount leaks PCI: mvebu: Move port parsing and resource claiming to separate function PCI: mvebu: Use port->name rather than "PCIe%d.%d" PCI: mvebu: Report full node name when reporting a DT error PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes PCI: mvebu: Use of_get_available_child_count() PCI: mvebu: Use exact config access size; don't read/modify/write PCI: mvebu: Return zero for reserved or unimplemented config space * pci/host-rcar: PCI: rcar: Fix I/O offset for multiple host bridges PCI: rcar: Set root bus nr to that provided in DT PCI: rcar: Remove dependency on ARM-specific struct hw_pci PCI: rcar: Make PCI aware of the I/O resources PCI: rcar: Build pcie-rcar.c only on ARM PCI: rcar: Build pci-rcar-gen2.c only on ARM * pci/host-tegra: PCI: tegra: Wrap static pgprot_t initializer with __pgprot() * pci/host-xgene: PCI/MSI: xgene: Remove msi_controller assignment
2015-11-03PCI: altera: Add Altera PCIe MSI driverLey Foon Tan1-0/+8
Add Altera PCIe MSI driver. This soft IP supports a configurable number of vectors, which is a DTS parameter. [bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2015-11-03PCI: hisi: Add HiSilicon SoC Hip05 PCIe driverZhou Wang1-0/+8
Add PCIe host support for HiSilicon SoC Hip05, related DT binding documentation, and maintainer update. [bhelgaas: changelog, 32-bit only config write warning text] Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: liudongdong <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-11-03PCI: layerscape: Add support for LS1043a and LS2080aMinghuan Lian1-1/+1
Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have similar PCIe implementation. LUT is added to controller. Add LS1043a and LS2080a support. [bhelgaas: move unused field removal into separate patch, include DT update] Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update) Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)
2015-10-30PCI: rcar: Build pcie-rcar.c only on ARMGeert Uytterhoeven1-1/+2
The pcie-rcar.c driver (controlled by PCI_RCAR_GEN2_PCIE) uses struct pci_sys_data and pci_ioremap_io(), which only exist on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pcie-rcar.c:138:52: warning: 'struct pci_sys_data' declared inside parameter list drivers/pci/host/pcie-rcar.c:380:4: error: implicit declaration of function 'pci_ioremap_io' [-Werror=implicit-function-declaration] Build pcie-rcar.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Reported-by: Wolfram Sang <wsa@the-dreams.de> (pci_ioremap_io()) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: rcar: Build pci-rcar-gen2.c only on ARMGeert Uytterhoeven1-1/+2
The pci-rcar-gen2.c driver (controlled by PCI_RCAR_GEN2) uses struct pci_sys_data, which only exists on ARM. Building it on other arches, e.g., arm64/shmobile, causes errors like this: drivers/pci/host/pci-rcar-gen2.c: In function 'rcar_pci_cfg_base': drivers/pci/host/pci-rcar-gen2.c:112:34: error: dereferencing pointer to incomplete type struct rcar_pci_priv *priv = sys->private_data; ^ Build pci-rcar-gen2.c only on ARM. [bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-23PCI: altera: Add Altera PCIe host controller driverLey Foon Tan1-0/+9
Add the Altera PCIe host controller driver. [bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI dependency from Arnd] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-09-01Merge tag 'armsoc-arm64' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Olof Johansson: "Here's our branch of ARM64 contents for this merge window. Most of this is DT contents for new SoCs (or those who have seen new device support added). Maybe we should stop separating out the arm64 contents here to avoid the kind of internal conflicts as we got this time around, where 32- and 64-bit contents conflicted. Anyhow, on the actual contents: New SoCs: - Broadcom North Star 2 (ns2) - Marvell Berlin4CT - Mediatek MT6795 - Rockchip RK3368 In addition, there are enhancements for the following platforms: - Mediatek MT8173: cpuidle-dt updates, misc other additions - ZyncMP: A bunch of devices added to the existing DTSI - Qualcomm MSM8916 and APQ8016 updates for USB, etc. + a handful of other updates for various platforms" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits) ARM64: dts: vexpress: Use assigned-clock-parents for sp810 ARM64: dts: mt6795: enable basic SMP bringup for MT6795 arm64: Enable Marvell Berlin SoC family in defconfig arm64: Enable Marvell Berlin SoC family in Kconfig arm64: dts: Add dts files for Marvell Berlin4CT SoC ARM64: zynqmp: Move SPI nodes to the right location ARM64: zynqmp: Move uart and ttcs to the right location ARM64: zynqmp: Enable spi flashes on ep108 ARM64: zynqmp: Add eeprom memories on i2c bus ARM64: zynqmp: Enable sdhci on ep108 ARM64: zynqmp: Enable watchdog on ep108 ARM64: zynqmp: Add DWC3 usb support ARM64: zynqmp: Add SMMU support ARM64: zynqmp: Add CANs node for platform ARM64: zynqmp: Use zynqmp specific compatible string for gpio devicetree: xilinx: zynqmp: add sata node PCI: iproc: Fix BCMA dependency in Kconfig arm64: dts: Add Broadcom North Star 2 support arm64: Add Broadcom iProc family support PCI: iproc: Fix ARM64 dependency in Kconfig ...
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas1-1/+1
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-20PCI: generic: Add arm64 supportJayachandran C1-1/+1
Make pci-host-generic driver (kernel option PCI_HOST_GENERIC) available on arm64. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-11PCI: iproc: Allow BCMA bus driver to be built as moduleHauke Mehrtens1-1/+1
Change CONFIG_PCIE_IPROC_BCMA to tristate to make it possible to build this driver as a module. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ray Jui <rjui@broadcom.com>
2015-07-29PCI: iproc: Fix BCMA dependency in KconfigRay Jui1-1/+1
The current iProc BCMA front-end driver can only work on ARM32 based platforms; therefore its config option in Kconfig should be changed to reflect that. This fixes arm64 allmodconfig build failure when compiling the the iProc BCMA driver that contains struct pci_sys_data that is arm32 specific Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-29PCI: iproc: Fix ARM64 dependency in KconfigRay Jui1-1/+1
Allow Broadcom iProc PCIe core driver to be compiled for ARM64 Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-06-16Merge branches 'pci/host-designware', 'pci/host-designware-common', ↵Bjorn Helgaas1-0/+20
'pci/host-generic', 'pci/host-imx6', 'pci/host-iproc' and 'pci/host-xgene' into next * pci/host-designware: PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM PCI: designware: Consolidate outbound iATU programming functions PCI: designware: Add support for x8 links * pci/host-designware-common: PCI: designware: Wait for link to come up with consistent style PCI: layerscape: Factor out ls_pcie_establish_link() PCI: layerscape: Use dw_pcie_link_up() consistently PCI: dra7xx: Use dw_pcie_link_up() consistently PCI: imx6: Rename imx6_pcie_start_link() to imx6_pcie_establish_link() * pci/host-generic: of/pci: Fix pci_address_to_pio() conversion of CPU address to I/O port * pci/host-imx6: PCI: imx6: Add #define PCIE_RC_LCSR PCI: imx6: Use "u32", not "uint32_t" PCI: imx6: Add speed change timeout message * pci/host-iproc: PCI: iproc: Free resource list after registration PCI: iproc: Directly add PCI resources PCI: iproc: Add BCMA PCIe driver PCI: iproc: Allow override of device tree IRQ mapping function * pci/host-xgene: arm64: dts: Add APM X-Gene PCIe MSI nodes PCI: xgene: Add APM X-Gene v1 PCIe MSI/MSIX termination driver
2015-06-05PCI: xgene: Add APM X-Gene v1 PCIe MSI/MSIX termination driverDuc Dang1-0/+9
APM X-Gene v1 SoC supports its own implementation of MSI, which is not compliant to GIC V2M specification for MSI Termination. There is a single MSI block in X-Gene v1 SOC which serves all 5 PCIe ports. This MSI block supports 2048 MSI termination ports coalesced into 16 physical HW IRQ lines and shared across all 5 PCIe ports. As there are only 16 HW IRQs to serve 2048 MSI vectors, to support set_affinity correctly for each MSI vectors, the 16 HW IRQs are statically allocated to 8 X-Gene v1 cores (2 HW IRQs for each cores). To steer MSI interrupt to target CPU, MSI vector is moved around these HW IRQs lines. With this approach, the total MSI vectors this driver supports is reduced to 256. [bhelgaas: squash doc, driver, maintainer update] Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2015-05-20PCI: iproc: Add BCMA PCIe driverHauke Mehrtens1-0/+11
This driver adds support for the PCIe 2.0 controller found on the BCMA bus. This controller can be found on (mostly) all Broadcom BCM470X / BCM5301X ARM SoCs. The driver found in the Broadcom SDK does some more stuff, like setting up some DMA memory areas, chaining MPS and MRRS to 512 and also some PHY changes like "improving" the PCIe jitter and doing some special initialization for the 3rd PCIe port. This was tested on a bcm4708 board with 2 PCIe ports and wireless cards connected to them. PCI_DOMAINS is needed by this driver, because normally there is more than one PCIe controller and without PCI_DOMAINS only the first controller gets registered. This controller gets 6 IRQs; the last one is trigged by all IRQ events. [bhelgaas: fix "GPLv2" MODULE_LICENSE typo] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Ray Jui <rjui@broadcom.com.com>
2015-04-08PCI: iproc: Add Broadcom iProc PCIe supportRay Jui1-0/+19
Add support for the Broadcom iProc PCIe controller. pcie-iproc.c is the common core driver, and a front-end bus interface needs to be added to support different bus interfaces. pcie-iproc-platform.c contains the support for the platform bus interface. Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-29PCI: versatile: Add DT-based ARM Versatile PB PCIe host driverRob Herring1-0/+4
This converts the Versatile PCI host code to a platform driver using the commom DT parsing and setup. The driver uses only an empty ARM pci_sys_data struct and does not use pci_common_init_dev init function. The old host code will be removed in a subsequent commit when Versatile is completely converted to DT. I've tested this on QEMU with the sym53c8xx driver in both i/o and memory mapped modes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> CC: Russell King <linux@arm.linux.org.uk> CC: Peter Maydell <peter.maydell@linaro.org>
2014-11-15Merge branches 'pci/host-designware', 'pci/host-dra7xx', 'pci/host-exynos', ↵Bjorn Helgaas1-1/+12
'pci/host-generic', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-spear' and 'pci/host-tegra' into next * pci/host-designware: PCI: designware: Add a blank line after declarations * pci/host-dra7xx: PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() * pci/host-exynos: PCI: exynos: Remove unnecessary return statement PCI: exynos: Add exynos prefix to add_pcie_port()/pcie_init() * pci/host-generic: PCI: generic: Convert to DT resource parsing API PCI: generic: Allocate config space windows after limiting bus number range * pci/host-imx6: PCI: imx6: Use tabs for indentation * pci/host-keystone: PCI: keystone: Remove unnecessary OOM message PCI: keystone: Make ks_dw_pcie_msi_domain_ops static * pci/host-layerscape: PCI: layerscape: Add Freescale Layerscape PCIe driver * pci/host-mvebu: PCI: mvebu: Add a blank line after declarations * pci/host-rcar: PCI: rcar: Make rcar_pci static * pci/host-spear: PCI: spear: Remove unnecessary OOM message PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. * pci/host-tegra: PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM
2014-11-13PCI: tegra: Add Kconfig help textThierry Reding1-0/+3
Add a standard help text to the Kconfig entry for the Tegra PCIe host controller driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13PCI: tegra: Do not build on 64-bit ARMThierry Reding1-1/+1
32-bit and 64-bit ARM use very different infrastructure to register a PCI host bridge. The Tegra PCIe host controller driver currently only supports the 32-bit ARM infrastructure, so prevent it from being built on 64-bit ARM where it will break. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-11-13PCI: layerscape: Add Freescale Layerscape PCIe driverMinghuan Lian1-0/+8
Add support for Freescale Layerscape PCIe controller. This driver re-uses the Synopsis DesignWare core code. [bhelgaas: add Kconfig dependency on CONFIG_ARM] Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds1-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-10-06Merge branch 'pci/host-xgene' into nextBjorn Helgaas1-1/+10
* pci/host-xgene: arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: xgene: Add APM X-Gene PCIe driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2014-10-01PCI: xgene: Add APM X-Gene PCIe driverTanmay Inamdar1-0/+10
Add the AppliedMicro X-Gene SOC PCIe host controller driver. The X-Gene PCIe controller supports up to 8 lanes and GEN3 speed. The X-Gene SOC supports up to 5 PCIe ports. [bhelgaas: folded in MAINTAINERS and bindings updates] Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> (driver)
2014-09-05Merge branches 'pci/misc', 'pci/pm', 'pci/host-designware', 'pci/host-imx6', ↵Bjorn Helgaas1-0/+19
'pci/host-keystone', 'pci/host-tegra' and 'pci/host-xilinx' into next * pci/misc: PCI/AER: Make <linux/aer.h> standalone includable PCI: Remove unnecessary variable in pci_add_dynid() * pci/pm: PCI/PM: Allow PCI devices to be put into D3cold during system suspend PCI/PM: Drop unused runtime PM support code for PCIe ports * pci/host-designware: PCI: designware: Check private_data validity in single place PCI: designware: Remove pci_assign_unassigned_resources() from dw_pcie_host_init() PCI: designware: Use pci_create_root_bus() instead of pci_scan_root_bus() PCI: designware: Parse bus-range property from devicetree PCI: designware: Add support for v3.65 hardware * pci/host-imx6: PCI: imx6: Probe in module_init(), not fs_initcall() PCI: designware: Remove pci_assign_unassigned_resources() from dw_pcie_host_init() PCI: designware: Use pci_create_root_bus() instead of pci_scan_root_bus() PCI: designware: Parse bus-range property from devicetree PCI: imx6: Put LTSSM in "Detect" state before disabling it MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver PCI: designware: Add support for v3.65 hardware * pci/host-keystone: PCI: keystone: Add TI Keystone PCIe driver PCI: designware: Add support for v3.65 hardware * pci/host-tegra: PCI: tegra: Implement a proper resource hierarchy PCI: tegra: Add missing cleanup in error path and tegra_msi_teardown_irq() resources: Add device-managed request/release_resource() * pci/host-xilinx: PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2014-09-05PCI: keystone: Add TI Keystone PCIe driverMurali Karicheri1-0/+10
The Keystone PCIe controller is based on v3.65 version of the Designware h/w. Main differences are: 1. No ATU support 2. Legacy and MSI IRQ functions are implemented in application register space 3. MSI interrupts are multiplexed over 8 IRQ lines to the Host side. All of the application register space handing code is organized into pci-keystone-dw.c and the functions are called from pci-keystone.c to implement PCI controller driver. Also add necessary DT documentation and update the MAINTAINERS file for the driver. [bhelgaas: spelling and whitespace fixes] Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Russell King <linux@arm.linux.org.uk> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Mohit Kumar <mohit.kumar@st.com> CC: Pratyush Anand <pratyush.anand@st.com> CC: Jingoo Han <jg1.han@samsung.com> CC: Richard Zhu <r65037@freescale.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Marek Vasut <marex@denx.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Randy Dunlap <rdunlap@infradead.org> CC: Grant Likely <grant.likely@linaro.org>
2014-09-04PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driverSrikanth Thokala1-0/+7
This is the driver for Xilinx AXI PCIe Host Bridge Soft IP. [bhelgaas: minor whitespace fixes] Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-09-03Merge tag 'pci-v3.17-fixes-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "This fixes an ARM allmodconfig build problem: Remove module option for ST Microelectronics SPEAr13xx" * tag 'pci-v3.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: spear: Remove module option
2014-08-19Merge tag 'pci-v3.17-changes-3' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Marvell MVEBU - Remove ARCH_KIRKWOOD dependency (Andrew Lunn) NVIDIA Tegra - Add debugfs support (Thierry Reding) Synopsys DesignWare - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I) - Program ATU with untranslated address (Kishon Vijay Abraham I) - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri) - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri) TI DRA7xx - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)" * tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware PCI: dra7xx: Add TI DRA7xx PCIe driver PCI: designware: Program ATU with untranslated address PCI: designware: Look for configuration space in 'reg', not 'ranges' PCI: tegra: Add debugfs support PCI: mvebu: Remove ARCH_KIRKWOOD dependency
2014-08-18PCI: spear: Remove module optionSachin Kamat1-1/+1
We get the following error when built as a module. Though the general fix would be in this case to export the below mentioned symbols, considering that dw_pcie_host_init() is marked with __init and other PCI drivers do not support modular build, I have disabled building this driver as a module too. ERROR: "dw_pcie_host_init" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_handle_msi_irq" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_pcie_msi_init" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_pcie_cfg_write" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_pcie_cfg_read" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_pcie_setup_rc" [drivers/pci/host/pcie-spear13xx.ko] undefined! ERROR: "dw_pcie_link_up" [drivers/pci/host/pcie-spear13xx.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-07-23Merge branches 'pci/host-designware', 'pci/host-mvebu' and 'pci/host-tegra' ↵Bjorn Helgaas1-1/+10
into next * pci/host-designware: PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware PCI: dra7xx: Add TI DRA7xx PCIe driver PCI: designware: Program ATU with untranslated address PCI: designware: Look for configuration space in 'reg', not 'ranges' * pci/host-mvebu: PCI: mvebu: Remove ARCH_KIRKWOOD dependency * pci/host-tegra: PCI: tegra: Add debugfs support
2014-07-23PCI: dra7xx: Add TI DRA7xx PCIe driverKishon Vijay Abraham I1-0/+9
Add support for PCIe controller in DRA7xx. This driver re-uses the designware core code that is already present in kernel. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Mohit Kumar <mohit.kumar@st.com> Cc: Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de>
2014-07-22PCI: mvebu: Remove ARCH_KIRKWOOD dependencyAndrew Lunn1-1/+1
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Cooper <jason@lakedaemon.net>
2014-07-14PCI: spear: Add PCIe driver for ST Microelectronics SPEAr13xxPratyush Anand1-0/+8
ARM based ST Microelectronics's SPEAr1310 and SPEAr1340 SOCs have onchip designware PCIe controller. To make that usable, this patch adds a wrapper driver based on existing designware driver. Adds bindings for this new driver and update MAINTAINERS as well. Cc: linux-pci@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mohit Kumar <mohit.kumar@st.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2014-05-30Merge branch 'pci/host-generic' into nextBjorn Helgaas1-0/+7
* pci/host-generic: MAINTAINERS: Add generic PCI host controller driver PCI: generic: Add generic PCI host controller driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2014-05-30PCI: generic: Add generic PCI host controller driverWill Deacon1-0/+7
Add support for a generic PCI host controller, such as a firmware-initialised device with static windows or an emulation by something such as kvmtool. The controller itself has no configuration registers and has its address spaces described entirely by the device-tree (using the bindings from ePAPR). Both CAM and ECAM are supported for Config Space accesses. Add corresponding documentation for the DT binding. [bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2014-05-28PCI: rcar: Add Renesas R-Car PCIe driverPhil Edworthy1-0/+6
This PCIe Host driver currently does not support MSI, so cards fall back to INTx interrupts. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-27PCI: rcar: Make the Kconfig dependencies more genericMagnus Damm1-1/+1
Update the R-Car Generation 2 PCI driver Kconfig dependencies to follow same style as other drivers - no SoC dependencies. Also, update the COMPILE_TEST bits to depend on ARM. This since the DMA bounce buffer and dma_ops handling code is ARM specific. [bhelgaas: adjust context after dropping DMABOUNCE patches] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-02 14:06:15 +0300