summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2023-09-23PCI: fu740: Set the number of MSI vectorsYong-Xuan Wang1-0/+1
[ Upstream commit 551a60e1225e71fff8efd9390204c505b0870e0f ] The iMSI-RX module of the DW PCIe controller provides multiple sets of MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI interrupts. However, the fu740 PCIe controller driver only enabled one set of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts was not specified. Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_* registers on the fu740 PCIe core, allowing the system to fully utilize the available MSI interrupts. Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23PCI: vmd: Disable bridge window for domain resetNirmal Patel1-2/+17
[ Upstream commit f73eedc90bf73d48e8368e6b0b4ad76a7fffaef7 ] During domain reset process vmd_domain_reset() clears PCI configuration space of VMD root ports. But certain platform has observed following errors and failed to boot. ... DMAR: VT-d detected Invalidation Queue Error: Reason f DMAR: VT-d detected Invalidation Time-out Error: SID ffff DMAR: VT-d detected Invalidation Completion Error: SID ffff DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: Invalidation Time-out Error (ITE) cleared The root cause is that memset_io() clears prefetchable memory base/limit registers and prefetchable base/limit 32 bits registers sequentially. This seems to be enabling prefetchable memory if the device disabled prefetchable memory originally. Here is an example (before memset_io()): PCI configuration space for 10000:00:00.0: 86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00 00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20 00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00 ... So, prefetchable memory is ffffffff00000000-575000fffff, which is disabled. When memset_io() clears prefetchable base 32 bits register, the prefetchable memory becomes 0000000000000000-575000fffff, which is enabled and incorrect. Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec: The Prefetchable Memory Limit register must be programmed to a smaller value than the Prefetchable Memory Base register if there is no prefetchable memory on the secondary side of the bridge. This is believed to be the reason for the failure and in addition the sequence of operation in vmd_domain_reset() is not following the PCIe specs. Disable the bridge window by executing a sequence of operations borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(), that comply with the PCI specifications. Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23PCI: dwc: Provide deinit callback for i.MXMark Brown1-0/+1
[ Upstream commit fc8b24c28bec19fc0621d108b9ee81ddfdedb25a ] The i.MX integration for the DesignWare PCI controller has a _host_exit() operation which undoes everything that the _host_init() operation does but does not wire this up as the host_deinit callback for the core, or call it in any path other than suspend. This means that if we ever unwind the initial probe of the device, for example because it fails, the regulator core complains that the regulators for the device were left enabled: imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G imx6q-pcie 33800000.pcie: Phy link never came up imx6q-pcie 33800000.pcie: Phy link never came up imx6q-pcie: probe of 33800000.pcie failed with error -110 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128 Wire up the callback so that the core can clean up after itself. Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernationDexuan Cui1-0/+3
commit 04bbe863241a9be7d57fb4cf217ee4a72f480e70 upstream. When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI addressRick Wertenbroek1-3/+3
commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream. A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs. This would result in the upper 32 bits being unintentionally zeroed and MSIs getting mapped to incorrect PCI addresses if the address had any of the upper bits set. Replace 32-bit mask by appropriate 64-bit mask. [kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI: microchip: Correct the DED and SEC interrupt bit offsetsDaire McNamara1-4/+4
[ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ] The SEC and DED interrupt bits are laid out the wrong way round so the SEC interrupt handler attempts to mask, unmask, and clear the DED interrupt and vice versa. Correct the bit offsets so that each interrupt handler operates properly. Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: qcom-ep: Switch MHI bus master clock off during L1SSManivannan Sadhasivam1-1/+1
[ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ] Currently, as part of the qcom_pcie_perst_deassert() function, instead of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable "val" is re-read. This must be fixed to ensure that the master clock supplied to the MHI bus is correctly gated during L1.1/L1.2 to save power. Thus, replace the line that re-reads "val" with a line that writes the updated value to the register to clear PARF_MSTR_AXI_CLK_EN. [kwilczynski: commit log] Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS") Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: apple: Initialize pcie->nvecs before useSven Peter1-1/+5
[ Upstream commit d8650c0c2aa2e413594e4cb0faafa9958c1d7782 ] The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set up the number of MSIs available for each port. However, it's called before apple_msi_init(), which initializes pcie->nvecs. Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such, initialized as zero. ilog2(0) happens to be 0xffffffff which then simply configures more MSIs in hardware than we have. This doesn't break anything because we never hand out those vectors. Thus, swap the order of the two calls so that the correctly initialized value is then used. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support") Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Revert "PCI: tegra194: Enable support for 256 Byte payload"Vidya Sagar1-10/+0
commit ebfde1584d9f037b6309fc682c96e22dac7bcb7a upstream. After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating the hierarchy. Consider an Endpoint that supports only MPS=128. In the default situation (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux tries to configure the MPS of every device to match the upstream bridge. If the Endpoint is directly below the Root Port, Linux can reduce the Root Port MPS to 128 to match the Endpoint. But if there's a switch in the middle, Linux doesn't reduce the Root Port MPS because other devices below the switch may already be configured with MPS larger than 128. This scenario results in uncorrectable Malformed TLP errors if the Root Port sends TLPs with payloads larger than 128 bytes. These errors can be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't seem to be a good idea to always have this parameter even for basic functionality to work. Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") so the Root Ports default to MPS=128, which all devices support. If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to get the benefit of larger MPS settings. [bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at the top, add missing acked by tag] Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org # v6.0-rc1+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23PCI: tegra194: Fix possible array out of bounds accessSumit Gupta1-2/+11
[ Upstream commit 205b3d02d57ce6dce96f6d2b9c230f56a9bf9817 ] Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/ Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Don't advertise MSI-X in PCIe capabilitiesRick Wertenbroek2-0/+29
[ Upstream commit a52587e0bee14cbeeadf48a24013828cb04b8df8 ] The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs. This is documented in the RK3399 technical reference manual (TRM) section 17.5.9 "Interrupt Support". MSI-X capability should therefore not be advertised. Remove the MSI-X capability by editing the capability linked-list. The previous entry is the MSI capability, therefore get the next entry from the MSI-X capability entry and set it as next entry for the MSI capability. This in effect removes MSI-X from the list. Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ... Linked list now : MSI cap -> PCIe Device cap -> ... Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Fix window mapping and address translation for endpointRick Wertenbroek2-88/+75
[ Upstream commit dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ] The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the driver up to 32 fixed size (1M) windows are used and pages are allocated and mapped accordingly. The driver first used a single window and allocated space inside which caused translation issues (between CPU space and PCI space) because a window can only have a single translation at a given time, which if multiple pages are allocated inside will cause conflicts. Now each window is a single region of 1M which will always guarantee that the translation is not in conflict. Set the translation register addresses for physical function. As documented in the technical reference manual (TRM) section 17.5.5 "PCIe Address Translation" and section 17.6.8 "Address Translation Registers Description" Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Remove writes to unused registersRick Wertenbroek1-10/+0
[ Upstream commit 92a9c57c325dd51682d428ba960d961fec3c8a08 ] Remove write accesses to registers that are marked "unused" (and therefore read-only) in the technical reference manual (TRM) (see RK3399 TRM 17.6.8.1) Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Stable-dep-of: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23PCI: rockchip: Set address alignment for endpoint modeDamien Le Moal1-0/+1
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream. The address translation unit of the rockchip EP controller does not use the lower 8 bits of a PCIe-space address to map local memory. Thus we must set the align feature field to 256 to let the user know about this constraint. Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Use u32 variable to access 32-bit registersRick Wertenbroek2-5/+6
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream. Previously u16 variables were used to access 32-bit registers, this resulted in not all of the data being read from the registers. Also the left shift of more than 16-bits would result in moving data out of the variable. Use u32 variables to access 32-bit registers Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint coreRick Wertenbroek2-35/+16
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream. Fix legacy IRQ generation for RK3399 PCIe endpoint core according to the technical reference manual (TRM). Assert and deassert legacy interrupt (INTx) through the legacy interrupt control register ("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe message. The generation of the legacy interrupt was tested and validated with the PCIe endpoint test driver. Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be lockedRick Wertenbroek2-0/+19
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream. The RK3399 PCIe controller should wait until the PHY PLLs are locked. Add poll and timeout to wait for PHY PLLs to be locked. If they cannot be locked generate error message and jump to error handler. Accessing registers in the PHY clock domain when PLLs are not locked causes hang The PHY PLLs status is checked through a side channel register. This is documented in the TRM section 17.5.8.1 "PCIe Initialization Sequence". Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Write PCI Device ID to correct registerRick Wertenbroek2-2/+6
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream. Write PCI Device ID (DID) to the correct register. The Device ID was not updated through the correct register. Device ID was written to a read-only register and therefore did not work. The Device ID is now set through the correct register. This is documented in the RK3399 TRM section 17.6.6.1.1 Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Assert PCI Configuration Enable bit after probeRick Wertenbroek1-0/+3
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream. Assert PCI Configuration Enable bit after probe. When this bit is left to 0 in the endpoint mode, the RK3399 PCIe endpoint core will generate configuration request retry status (CRS) messages back to the root complex. Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply to configuration requests from the root complex. This is documented in section 17.5.8.1.2 of the RK3399 TRM. Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: qcom: Disable write access to read only registers for IP v2.3.3Manivannan Sadhasivam1-0/+2
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream. In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()Xinghui Li1-1/+2
[ Upstream commit 0c0206dc4f5ba2d18b15e24d2047487d6f73916b ] The ret variable in the vmd_enable_domain() function was used uninitialized when printing a warning message upon failure of the pci_reset_bus() function. Thus, fix the issue by assigning ret with the value returned from pci_reset_bus() before referencing it in the warning message. This was detected by Smatch: drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'. [kwilczynski: drop the second patch from the series, add missing reported by tag, commit log] Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges") Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Xinghui Li <korantli@tencent.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Disable write access to read only registers for IP v2.9.0Manivannan Sadhasivam1-0/+3
[ Upstream commit 200b8f85f2021362adcc8efb575652a2aa44c099 ] In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en() guard function to align with rest of the driver. Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Use DWC helpers for modifying the read-only DBI registersManivannan Sadhasivam1-5/+3
[ Upstream commit 60f0072d7fb7996b9a524ef0d152e21205473192 ] DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for enabling and disabling the write access to read only DBI registers. So let's use them instead of doing it manually. Also, the existing code doesn't disable the write access when it's done. This is also fixed now. Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Use lower case for hexManivannan Sadhasivam1-7/+7
[ Upstream commit 94ebd232dbc84dfdfbf0c406137a8b2aa8b37a01 ] To maintain uniformity, let's use lower case for representing hexadecimal numbers. Link: https://lore.kernel.org/r/20230316081117.14288-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Sort and group registers and bitfield definitionsManivannan Sadhasivam1-45/+63
[ Upstream commit 769e49d87b15c302c9aadd87c7d114cfe7052320 ] Sorting the registers and their bit definitions will make it easier to add more definitions in the future and it also helps in maintenance. While at it, let's also group the registers and bit definitions separately as done in the pcie-qcom-ep driver. Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Remove PCIE20_ prefix from register definitionsManivannan Sadhasivam1-93/+91
[ Upstream commit 39171b33f6523f28c1c1256427e5f50c74b69639 ] The PCIE part is redundant and 20 doesn't represent anything across the SoCs supported now. So let's get rid of the prefix. This involves adding the IP version suffix to one definition of PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version. The other definition is generic for the rest of the versions. Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere, hence removed. Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: ftpci100: Release the clock resourcesJunyan Ye1-12/+2
[ Upstream commit c60738de85f40b0b9f5cb23c21f9246e5a47908c ] Smatch reported: 1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn: 'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517. 2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn: 'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517. The clock resource is obtained by devm_clk_get(), and then clk_prepare_enable() makes the clock resource ready for use. After that, clk_disable_unprepare() should be called to release the clock resource when it is no longer needed. However, while doing some error handling in faraday_pci_probe(), clk_disable_unprepare() is not called to release clk and p->bus_clk before returning. These return lines are exactly 442, 451, 462, 478, 512, 517. Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(), which is equivalent to devm_clk_get() + clk_prepare_enable(). And with devm_clk_get_enabled(), the clock will automatically be disabled, unprepared and freed when the device is unbound from the bus. Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn Fixes: b3c433efb8a3 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()") Fixes: 2eeb02b28579 ("PCI: faraday: Add clock handling") Fixes: 783a862563f7 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()") Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Fixes: f1e8bd21e39e ("PCI: faraday: Convert IRQ masking to raw PCI config accessors") Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: vmd: Reset VMD config register between soft rebootsNirmal Patel1-0/+8
[ Upstream commit b61cf04c49c3dfa70a0d6725d3eb40bf9b35cf71 ] VMD driver can disable or enable MSI remapping by changing VMCONFIG_MSI_REMAP register. This register needs to be set to the default value during soft reboots. Drives failed to enumerate when Windows boots after performing a soft reboot from Linux. Windows doesn't support MSI remapping disable feature and stale register value hinders Windows VMD driver initialization process. Adding vmd_shutdown function to make sure to set the VMCONFIG register to the default value. Link: https://lore.kernel.org/r/20230224202811.644370-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: cadence: Fix Gen2 Link Retraining processSiddharth Vadapalli1-0/+27
[ Upstream commit 0e12f830236928b6fadf40d917a7527f0a048d2f ] The Link Retraining process is initiated to account for the Gen2 defect in the Cadence PCIe controller in J721E SoC. The errata corresponding to this is i2085, documented at: https://www.ti.com/lit/er/sprz455c/sprz455c.pdf The existing workaround implemented for the errata waits for the Data Link initialization to complete and assumes that the link retraining process at the Physical Layer has completed. However, it is possible that the Physical Layer training might be ongoing as indicated by the PCI_EXP_LNKSTA_LT bit in the PCI_EXP_LNKSTA register. Fix the existing workaround, to ensure that the Physical Layer training has also completed, in addition to the Data Link initialization. Link: https://lore.kernel.org/r/20230315070800.1615527-1-s-vadapalli@ti.com Fixes: 4740b969aaf5 ("PCI: cadence: Retrain Link to work around Gen2 training defect") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28PCI: hv: Add a per-bus mutex state_lockDexuan Cui1-3/+26
commit 067d6ec7ed5b49380688e06c1e5f883a71bef4fe upstream. In the case of fast device addition/removal, it's possible that hv_eject_device_work() can start to run before create_root_hv_pci_bus() starts to run; as a result, the pci_get_domain_bus_and_slot() in hv_eject_device_work() can return a 'pdev' of NULL, and hv_eject_device_work() can remove the 'hpdev', and immediately send a message PCI_EJECTION_COMPLETE to the host, and the host immediately unassigns the PCI device from the guest; meanwhile, create_root_hv_pci_bus() and the PCI device driver can be probing the dead PCI device and reporting timeout errors. Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the mutex before powering on the PCI bus in hv_pci_enter_d0(): when hv_eject_device_work() starts to run, it's able to find the 'pdev' and call pci_stop_and_remove_bus_device(pdev): if the PCI device driver has loaded, the PCI device driver's probe() function is already called in create_root_hv_pci_bus() -> pci_bus_add_devices(), and now hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to call the PCI device driver's remove() function and remove the device reliably; if the PCI device driver hasn't loaded yet, the function call hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to remove the PCI device reliably and the PCI device driver's probe() function won't be called; if the PCI device driver's probe() is already running (e.g., systemd-udev is loading the PCI device driver), it must be holding the per-device lock, and after the probe() finishes and releases the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to proceed to remove the device reliably. Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28PCI: hv: Fix a race condition in hv_irq_unmask() that can cause panicDexuan Cui1-6/+5
commit 2738d5ab7929a845b654cd171a1e275c37eb428e upstream. When the host tries to remove a PCI device, the host first sends a PCI_EJECT message to the guest, and the guest is supposed to gracefully remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host; the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to the guest (when the guest receives this message, the device is already unassigned from the guest) and the guest can do some final cleanup work; if the guest fails to respond to the PCI_EJECT message within one minute, the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and removes the PCI device forcibly. In the case of fast device addition/removal, it's possible that the PCI device driver is still configuring MSI-X interrupts when the guest receives the PCI_EJECT message; the channel callback calls hv_pci_eject_device(), which sets hpdev->state to hv_pcichild_ejecting, and schedules a work hv_eject_device_work(); if the PCI device driver is calling pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the while loop in hv_compose_msi_msg() due to the updated hpdev->state, and leave data->chip_data with its default value of NULL; later, when the PCI device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest crashes in hv_arch_irq_unmask() due to data->chip_data being NULL. Fix the issue by not testing hpdev->state in the while loop: when the guest receives PCI_EJECT, the device is still assigned to the guest, and the guest has one minute to finish the device removal gracefully. We don't really need to (and we should not) test hpdev->state in the loop. Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28PCI: hv: Remove the useless hv_pcichild_state from struct hv_pci_devDexuan Cui1-12/+0
commit add9195e69c94b32e96f78c2f9cea68f0e850b3f upstream. The hpdev->state is never really useful. The only use in hv_pci_eject_device() and hv_eject_device_work() is not really necessary. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"Dexuan Cui1-37/+34
commit a847234e24d03d01a9566d1d9dcce018cc018d67 upstream. This reverts commit d6af2ed29c7c1c311b96dac989dcb991e90ee195. The statement "the hv_pci_bus_exit() call releases structures of all its child devices" in commit d6af2ed29c7c is not true: in the path hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the child "struct hv_pci_dev *hpdev" that is created earlier in pci_devices_present_work() -> new_pcichild_device(). The commit d6af2ed29c7c was originally made in July 2020 for RHEL 7.7, where the old version of hv_pci_bus_exit() was used; when the commit was rebased and merged into the upstream, people didn't notice that it's not really necessary. The commit itself doesn't cause any issue, but it makes hv_pci_probe() more complicated. Revert it to facilitate some upcoming changes to hv_pci_probe(). Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Wei Hu <weh@microsoft.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28PCI: hv: Fix a race condition bug in hv_pci_query_relations()Dexuan Cui1-0/+18
commit 440b5e3663271b0ffbd4908115044a6a51fb938b upstream. Since day 1 of the driver, there has been a race between hv_pci_query_relations() and survey_child_resources(): during fast device hotplug, hv_pci_query_relations() may error out due to device-remove and the stack variable 'comp' is no longer valid; however, pci_devices_present_work() -> survey_child_resources() -> complete() may be running on another CPU and accessing the no-longer-valid 'comp'. Fix the race by flushing the workqueue before we exit from hv_pci_query_relations(). Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11PCI: imx6: Install the fault handler only on compatible matchH. Nikolaus Schaller1-0/+7
[ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ] commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") added a fault hook to this driver in the probe function. So it was only installed if needed. commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") moved it from probe to driver init which installs the hook unconditionally as soon as the driver is compiled into a kernel. When this driver is compiled as a module, the hook is not registered until after the driver has been matched with a .compatible and loaded. commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling") extended the fault handling code. commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") added some protection for non-ARM architectures, but this does not protect non-i.MX ARM architectures. Since fault handlers can be triggered on any architecture for different reasons, there is no guarantee that they will be triggered only for the assumed situation, leading to improper error handling (i.MX6-specific imx6q_pcie_abort_handler) on foreign systems. I had seen strange L3 imprecise external abort messages several times on OMAP4 and OMAP5 devices and couldn't make sense of them until I realized they were related to this unused imx6q driver because I had CONFIG_PCI_IMX6=y. Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed to run on different ARM SoC and be differentiated only by device tree binaries. So turning off CONFIG_PCI_IMX6 is not a solution. Therefore we check the compatible in the init function before registering the fault handler. Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling") Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11PCI: qcom: Fix the incorrect register usage in v2.7.0 configManivannan Sadhasivam1-5/+3
commit 2542e16c392508800f1d9037feee881a9c444951 upstream. Qcom PCIe IP version v2.7.0 and its derivatives don't contain the PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect register usage which is modifying a different register. Also in this IP version, this register change doesn't depend on MSI being enabled. So remove that check also. Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> # 5.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11PCI: kirin: Select REGMAP_MMIOJosh Triplett1-0/+1
commit 3a2776e8a0e156a61f5b59ae341d8fffc730b962 upstream. pcie-kirin uses regmaps, and needs to pull them in; otherwise, with CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces a linker failure looking for __devm_regmap_init_mmio_clk(). Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett <josh@joshtriplett.org> [lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org # 5.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabledYoshihiro Shimoda1-5/+5
[ Upstream commit cdce67099117ece371582f706c6eff7d3a65326d ] If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val' is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization. Commit ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") did not account for further usage of 'val', so we wrote improper values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled. Move the PCIE_PORT_LINK_CONTROL update to be completely after the PCIE_PL_CHK_REG_CONTROL_STATUS register initialization. [bhelgaas: commit log adapted from Serge's version] Fixes: ec7b952f453c ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists") Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11PCI: loongson: Add more devices that need MRRS quirkHuacai Chen1-9/+24
[ Upstream commit c768f8c5f40fcdc6f058cc2f02592163d6c6716c ] Loongson-2K SOC and LS7A2000 chipset add new PCI IDs that need MRRS quirk. Add them. Link: https://lore.kernel.org/r/20230211023321.3530080-1-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11PCI: loongson: Prevent LS7A MRRS increasesHuacai Chen1-29/+15
[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ] Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions. Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value. The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device. N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision. [1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn [bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10PCI: qcom: Fix host-init error handlingJohan Hovold1-1/+12
[ Upstream commit 997e010de9134474dbfde52be03efd7d1bce902d ] Implement the new host_deinit() callback so that the PHY is powered off and regulators and clocks are disabled also on late host-init errors. Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10PCI: mt7621: Delay phy ports initializationSergio Paracuellos1-0/+2
[ Upstream commit 0cb2a8f3456ff1cc51d571e287a48e8fddc98ec2 ] Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need to delay phy port initialization after calling the mt7621_pcie_init_port() driver function to get into reliable boots for both warm and hard resets. The delay required to detect the ports seems to be in the range [75-100] milliseconds. If the ports are not detected the controller is not functional. There is no datasheet or something similar to really understand why this extra delay is needed only for these devices and it is not for most of the boards that are built on mt7621 SoC. This issue has been reported by openWRT community and the complete discussion is in [0]. The 100 milliseconds delay has been tested in all devices to validate it. Add the extra 100 milliseconds delay to fix the issue. [0]: https://github.com/openwrt/openwrt/pull/11220 Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31PCI: vmd: Fix secondary bus reset for Intel bridgesFrancisco Munoz1-2/+20
[ Upstream commit 0a584655ef89541dae4d48d2c523b1480ae80284 ] The reset was never applied in the current implementation because Intel Bridges owned by VMD are parentless. Internally, pci_reset_bus() applies a reset to the parent of the PCI device supplied as argument, but in this case it failed because there wasn't a parent. In more detail, this change allows the VMD driver to enumerate NVMe devices in pass-through configurations when guest reboots are performed. There was an attempted to fix this, but later we discovered that the code inside pci_reset_bus() wasn’t triggering secondary bus resets. Therefore, we updated the parameters passed to it, and now NVMe SSDs attached to VMD bridges are properly enumerated in VT-d pass-through scenarios. Link: https://lore.kernel.org/r/20221206001637.4744-1-francisco.munoz.ruiz@linux.intel.com Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration") Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31PCI: imx6: Initialize PHY before deasserting core resetSascha Hauer1-6/+7
[ Upstream commit ae6b9a65af480144da323436d90e149501ea8937 ] When the PHY is the reference clock provider then it must be initialized and powered on before the reset on the client is deasserted, otherwise the link will never come up. The order was changed in cf236e0c0d59. Restore the correct order to make the driver work again on boards where the PHY provides the reference clock. This also changes the order for boards where the Soc is the PHY reference clock divider, but this shouldn't do any harm. Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de Fixes: cf236e0c0d59 ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling") Tested-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31PCI: vmd: Disable MSI remapping after suspendNirmal Patel1-0/+5
[ Upstream commit d899aa668498c07ff217b666ae9712990306e682 ] MSI remapping is disabled by VMD driver for Intel's Icelake and newer systems in order to improve performance by setting VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared by firmware during boot. The same register gets cleared when system is put in S3 power state. VMD driver needs to set this register again in order to avoid interrupt issues with devices behind VMD if MSI remapping was disabled before. Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31PCI: dwc: Fix n_fts[] array overrunVidya Sagar1-1/+1
[ Upstream commit 66110361281b2f7da0c8bd51eaf1f152f4236035 ] commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup") incorrectly uses pci->link_gen in deriving the index to the n_fts[] array also introducing the issue of accessing beyond the boundaries of array for greater than Gen-2 speeds. This change fixes that issue. Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-21PCI: mt7621: Add sentinel to quirks tableJohn Thomson1-1/+2
commit 19098934f910b4d47cb30251dd39ffa57bef9523 upstream. Current driver is missing a sentinel in the struct soc_device_attribute array, which causes an oops when assessed by the soc_device_match(mt7621_pcie_quirks_match) call. This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr was fixed to register the SOC as a device, in: commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early") Fix it by adding the required sentinel. Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au Fixes: b483b4e4d3f6 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'") Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-12PCI: hv: Only reuse existing IRTE allocation for Multi-MSIDexuan Cui1-15/+75
Jeffrey added Multi-MSI support to the pci-hyperv driver by the 4 patches: 08e61e861a0e ("PCI: hv: Fix multi-MSI to allow more than one MSI vector") 455880dfe292 ("PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI") b4b77778ecc5 ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()") a2bad844a67b ("PCI: hv: Fix interrupt mapping for multi-MSI") It turns out that the third patch (b4b77778ecc5) causes a performance regression because all the interrupts now happen on 1 physical CPU (or two pCPUs, if one pCPU doesn't have enough vectors). When a guest has many PCI devices, it may suffer from soft lockups if the workload is heavy, e.g., see https://lwn.net/ml/linux-kernel/20220804025104.15673-1-decui@microsoft.com/ Commit b4b77778ecc5 itself is good. The real issue is that the hypercall in hv_irq_unmask() -> hv_arch_irq_unmask() -> hv_do_hypercall(HVCALL_RETARGET_INTERRUPT...) only changes the target virtual CPU rather than physical CPU; with b4b77778ecc5, the pCPU is determined only once in hv_compose_msi_msg() where only vCPU0 is specified; consequently the hypervisor only uses 1 target pCPU for all the interrupts. Note: before b4b77778ecc5, the pCPU is determined twice, and when the pCPU is determined the second time, the vCPU in the effective affinity mask is used (i.e., it isn't always vCPU0), so the hypervisor chooses different pCPU for each interrupt. The hypercall will be fixed in future to update the pCPU as well, but that will take quite a while, so let's restore the old behavior in hv_compose_msi_msg(), i.e., don't reuse the existing IRTE allocation for single-MSI and MSI-X; for multi-MSI, we choose the vCPU in a round-robin manner for each PCI device, so the interrupts of different devices can happen on different pCPUs, though the interrupts of each device happen on some single pCPU. The hypercall fix may not be backported to all old versions of Hyper-V, so we want to have this guest side change forever (or at least till we're sure the old affected versions of Hyper-V are no longer supported). Fixes: b4b77778ecc5 ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()") Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Co-developed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221104222953.11356-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-11-03PCI: hv: Fix the definition of vector in hv_compose_msi_msg()Dexuan Cui1-6/+16
The local variable 'vector' must be u32 rather than u8: see the struct hv_msi_desc3. 'vector_count' should be u16 rather than u8: see struct hv_msi_desc, hv_msi_desc2 and hv_msi_desc3. Fixes: a2bad844a67b ("PCI: hv: Fix interrupt mapping for multi-MSI") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Jeffrey Hugo <quic_jhugo@quicinc.com> Cc: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-10-17Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"Jon Hunter1-3/+8
This reverts commit 8bb7ff12a91429eb76e093b517ae810b146448fe. Commit 8bb7ff12a914 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro") updated the Tegra PCI driver to use the macro PCI_CONF1_EXT_ADDRESS() instead of a local function in the Tegra PCI driver. This broke PCI for some Tegra platforms because, when calculating the offset value, the mask applied to the lower 8-bits changed from 0xff to 0xfc. For now, fix this by reverting this commit. Fixes: 8bb7ff12a914 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro") Link: https://lore.kernel.org/r/20221017084006.11770-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-22 17:44:49 +0300