summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2019-10-11PCI: vmd: Fix shadow offsets to reflect spec changesJon Derrick1-3/+6
commit a1a30170138c9c5157bd514ccd4d76b47060f29b upstream. The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing itDexuan Cui1-1/+1
commit 533ca1feed98b0bf024779a14760694c7cb4d431 upstream. The slot must be removed before the pci_dev is removed, otherwise a panic can happen due to use-after-free. Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11PCI: vmd: Fix config addressing when using bus offsetsJon Derrick1-7/+9
commit e3dffa4f6c3612dea337c9c59191bd418afc941b upstream. VMD maps child device config spaces to the VMD Config BAR linearly regardless of the starting bus offset. Because of this, the config address decode must ignore starting bus offsets when mapping the BDF to the config space address. Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07PCI: exynos: Propagate errors for optional PHYsThierry Reding1-1/+1
[ Upstream commit ddd6960087d4b45759434146d681a94bbb1c54ad ] devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: imx6: Propagate errors for optional regulatorsThierry Reding1-2/+2
[ Upstream commit 2170a09fb4b0f66e06e5bcdcbc98c9ccbf353650 ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: histb: Propagate errors for optional regulatorsThierry Reding1-2/+2
[ Upstream commit 8f9e1641ba445437095411d9fda2324121110d5d ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: rockchip: Propagate errors for optional regulatorsThierry Reding1-8/+8
[ Upstream commit 0e3ff0ac5f71bdb6be2a698de0ed0c7e6e738269 ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Lin <shawn.lin@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: mobiveil: Fix the CPU base address setup in inbound windowHou Zhiqiang1-3/+7
[ Upstream commit df901c85cc28b538c62f6bc20b16a8bd05fcb756 ] Current code erroneously sets-up the CPU base address through the parameter 'pci_addr', which is passed to initialize the CPU (AXI) base address of the inbound window where the controller maps the PCI address space into CPU physical address space; furthermore, it also truncates it by programming only the lower 32-bit value into the inbound CPU address register. Fix both issues by introducing a new parameter 'u64 cpu_addr' to initialize both lower 32-bit and upper 32-bit of the CPU physical base address mapping PCI inbound transactions into CPU (AXI) ones. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driverXiaowei Bao1-0/+1
[ Upstream commit fd5d16531a39322c3d7433d9f8a36203c9aaeddc ] The layerscape PCIe controller have 4 BARs. BAR0 and BAR1 are 32bit, BAR2 and BAR4 are 64bit and that's a fixed hardware configuration. Set the bar_fixed_64bit variable accordingly. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-07PCI: tegra: Fix OF node reference leakNishka Dasgupta1-7/+15
[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ] Each iteration of for_each_child_of_node() executes of_node_put() on the previous node, but in some return paths in the middle of the loop of_node_put() is missing thus causing a reference leak. Hence stash these mid-loop return values in a variable 'err' and add a new label err_node_put which executes of_node_put() on the previous node and returns 'err' on failure. Change mid-loop return statements to point to jump to this label to fix the reference leak. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> [lorenzo.pieralisi@arm.com: rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-13Merge branch 'pci/trivial'Bjorn Helgaas6-6/+6
- Fix typos and whitespace errors (Bjorn Helgaas) * pci/trivial: PCI: Fix typos and whitespace errors
2019-07-13Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas1-6/+5
- Fix Xilinx NWL multi-MSI vector aliasing issue (Bharat Kumar Gogada) * remotes/lorenzo/pci/xilinx: PCI: xilinx-nwl: Fix Multi MSI data programming
2019-07-13Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-82/+507
- Reorganize Tegra AFI/PHY/REFCLK/etc functions (Manikanta Maddireddy) - Mask Tegra AFI_INTR in runtime suspend (Manikanta Maddireddy) - Fix Tegra AFI/PCIe powerup sequence (Manikanta Maddireddy) - Add Tegra124, Tegra132, Tegra210, and Tegra186 support for Gen2 link speed (Manikanta Maddireddy) - Advertise Tegra AER support (Manikanta Maddireddy) - Program Tegra210 UPHY settings (Manikanta Maddireddy) - Enable Tegra opportunistic UpdateFC and ACK (Manikanta Maddireddy) - Disable Tegra AFI dynamic clock gating (Manikanta Maddireddy) - Process Tegra pending DLL transactions before entering L1 or L2 to prevent receiver errors (Manikanta Maddireddy) - Enable Tegra xclk clock clamping in L1 (Manikanta Maddireddy) - Increase Tegra deskew retry time (Manikanta Maddireddy) - Work around Tegra hardware RAW erratum (Manikanta Maddireddy) - Update Tegra210 flow control timer frequency (Manikanta Maddireddy) - Work around Tegra Gen1/Gen2 link number negotiation issue (Manikanta Maddireddy) - Work around Tegra PLLE power down issue (Manikanta Maddireddy) - Program Tegra20 to support cacheable upstream transactions (Manikanta Maddireddy) - Log Tegra PRSNT_SENSE_IRQ as debug, not err (Manikanta Maddireddy) - Add register offset for third Root Port on Tegra186 and Tegra30 (Manikanta Maddireddy) - Document Tegra PCIe DPD pinctrl property (Manikanta Maddireddy) - Put Tegra PEX CLK & BIAS pads in DPD mode to reduce power usage when powergated (Manikanta Maddireddy) - Add generic DT binding for "reset-gpios" property (Manikanta Maddireddy) - Add Tegra support for GPIO-based PERST# (Manikanta Maddireddy) - Enable Relaxed Ordering only for Tegra20 & Tegra30 (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 PCI: tegra: Change link retry log level to debug PCI: tegra: Add support for GPIO based PERST# PCI: Add DT binding for "reset-gpios" property PCI: tegra: Put PEX CLK & BIAS pads in DPD mode dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of SoC struct PCI: tegra: Change PRSNT_SENSE IRQ log to debug PCI: tegra: Program AFI_CACHE_BAR_{0,1}_{ST,SZ} registers only for Tegra20 PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal PCI: tegra: Set target speed as Gen1 before starting LTSSM PCI: tegra: Update flow control timer frequency in Tegra210 PCI: tegra: Add SW fixup for RAW violations PCI: tegra: Increase the deskew retry time PCI: tegra: Enable PCIe xclk clock clamping PCI: tegra: Process pending DLL transactions before entering L1 or L2 PCI: tegra: Disable AFI dynamic clock gating PCI: tegra: Enable opportunistic UpdateFC and ACK PCI: tegra: Program UPHY electrical settings for Tegra210 PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability PCI: tegra: Add PCIe Gen2 link speed support PCI: tegra: Fix PCIe host power up sequence PCI: tegra: Mask AFI_INTR in runtime suspend PCI: tegra: Rearrange Tegra PCIe driver functions PCI: tegra: Handle failure cases in tegra_pcie_power_on() soc/tegra: pmc: Export tegra_powergate_power_on()
2019-07-13Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-61/+54
- Move qcom driver to bulk clock API (Bjorn Andersson) - Add Qualcomm QCS404 PCIe controller support (Bjorn Andersson) - Ensure Qualcomm PERST is asserted for at least 100ms (Niklas Cassel) * remotes/lorenzo/pci/qcom: PCI: qcom: Ensure that PERST is asserted for at least 100 ms PCI: qcom: Add QCS404 PCIe controller support dt-bindings: PCI: qcom: Add QCS404 to the binding PCI: qcom: Use clk bulk API for 2.4.0 controllers
2019-07-13Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas1-213/+312
- Unify mobiveil register accessors (Hou Zhiqiang) - Remove MSI_FLAG_MULTI_PCI_MSI since mobiveil hardware doesn't support Multiple MSI (Hou Zhiqiang) - Program outbound windows with base address from DT instead of assuming zero (Hou Zhiqiang) - Skip "safe" list traversal when it's unnecessary (Hou Zhiqiang) - Initialize WIN_NUM_0 explicitly for CFG outbound transactions (Hou Zhiqiang) - Use WIN_NUM_0 for MEM inbound transactions (Hou Zhiqiang) - Fix up mobiveil Class Code to PCI_CLASS_BRIDGE_PCI (Hou Zhiqiang) - Wait for link-up before enumerating devices, not while initializing host (Hou Zhiqiang) - Move IRQ chained handler setup out of DT code (Hou Zhiqiang) - Set primary/secondary/subordinate bus numbers (Hou Zhiqiang) - Fix "valid device" check to allow root bus device 0 to be multi-function (Hou Zhiqiang) - Make DT "gpio_slave" and "apb_csr" properties optional (Hou Zhiqiang) - Refactor MEM/IO outbound window initialization (Hou Zhiqiang) - Fix validity check for inbound/outbound window programming (Hou Zhiqiang) - Initialize and preserve window control bits (Hou Zhiqiang) - Fix 64-bit outbound window setup (both CPU and PCI addresses) (Hou Zhiqiang) - Move IO port setup to host init (Hou Zhiqiang) - Fix infinite loop in INTx ISR (Hou Zhiqiang) - Fix INTx interrupt clearing to avoid missed interrupts (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional PCI: mobiveil: Fix devfn check in mobiveil_pcie_valid_device() PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers PCI: mobiveil: Move IRQ chained handler setup out of DT parse PCI: mobiveil: Move the link up waiting out of mobiveil_host_init() PCI: mobiveil: Fix the Class Code field PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound window PCI: mobiveil: Update the resource list traversal function PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSI PCI: mobiveil: Unify register accessors
2019-07-13Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-6/+9
- Fix Hyper-V use-after-free in eject path (Dexuan Cui) * remotes/lorenzo/pci/hv: PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
2019-07-13Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas5-35/+80
- Add dwc API support to de-initialize host (Vidya Sagar) - Clean up dwc DBI,ATU read and write APIs (Vidya Sagar) - Export dwc APIs to support .remove() so drivers can be modular (Vidya Sagar) - Simplify imx6 Kconfig dependencies (Leonard Crestez) - Fix dra7xx build error when !CONFIG_GPIOLIB (YueHaibing) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: imx6: Simplify Kconfig depends on PCI: dwc: Export APIs to support .remove() implementation PCI: dwc: Cleanup DBI,ATU read and write APIs PCI: dwc: Add API support to de-initialize host
2019-07-13Merge branch 'remotes/lorenzo/pci/armada'Bjorn Helgaas1-1/+81
- Add Armada8k PHYs support (Miquel Raynal) * remotes/lorenzo/pci/armada: PCI: armada8k: Add PHYs support
2019-07-09PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIBYueHaibing1-0/+1
If CONFIG_GPIOLIB is not selected the compilation results in the following build errors: drivers/pci/controller/dwc/pci-dra7xx.c: In function dra7xx_pcie_probe: drivers/pci/controller/dwc/pci-dra7xx.c:777:10: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Fix them by including the appropriate header file. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas6-6/+6
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-07-08PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()Hou Zhiqiang1-3/+2
The current INTx handling function clears all interrupts after handling the first pending; this can potentially cause missing INTx detection. Fix the code to clear only the handled INTx IRQ. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Acked-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Tested-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix infinite-loop in the INTx handling functionHou Zhiqiang1-3/+9
In the loop handling INTx interrupts in mobiveil_pcie_isr(), there is no code to update the loop control variable, which is causing an infinite loop. Fix the code by reading the interrupt status registers inside the loop. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Acked-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Tested-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move PCIe PIO enablement out of inbound window routineHou Zhiqiang1-4/+5
Move the PCIe PIO master enablement to function mobiveil_host_init(). Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound windowHou Zhiqiang1-3/+6
Current code erroneously sets-up the lower 32-bit PCI base address in the inbound window, which results in inbound transactions not working in 64-bit platforms. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound windowHou Zhiqiang1-1/+4
Current code erroneously sets-up only the lower 32-bit CPU base address in the outbound window, which results in outbound transactions not working in 64-bit platforms. Fix it. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setupHou Zhiqiang1-2/+2
The lower 10 bits of window size field are hardcoded to zero in HW so they can't really be changed but the lower 10-bit of PAB_AXI_AMAP_CTRL register are used for control fields, so while programming inbound and outbout windows decoding we should mask out the lower 10-bit of window size to prevent overriding the control bits. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Clear the control fields before updating itHou Zhiqiang1-5/+12
While programming the inbound and outbound windows in program_{ib/ob}_windows() we shoud clear the control fields in the registers before programming it with a new value to prevent stale bits from older configuration. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add configured inbound windows counterHou Zhiqiang1-0/+1
Current code only keeps track of the number of outbound windows configured but it does not for inbound windows. Add a counter to keep track of initialized inbound windows. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix the valid check for inbound and outbound windowsHou Zhiqiang1-2/+2
In program_ib/ob_windows() check the window index from the function parameter instead of the total number of initialized windows to determine if the specified window is valid. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Clean-up program_{ib/ob}_windows()Hou Zhiqiang1-17/+8
In function program_ob_windows(), remove the redundant read operations to registers PAB_AXI_AMAP_AXI_WIN and PAB_AXI_AMAP_PEX_WIN_H, and remove the useless definition of 'value'. Rename the parameter 'config_io_bit' to 'type' and then remove the definition of 'type'. In function program_ib_windows(), remove the definitions of 'pio_ctrl_val' and 'amap_ctrl_dw' and reduce to only one variable 'value' to keep the temporary value read from registers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Remove an unnecessary return value checkHou Zhiqiang1-2/+0
The memory for the host controller private structure (struct mobiveil_pcie) is allocated together with the pci_host_bridge structure in function devm_pci_alloc_host_bridge(), so it is unnecessary to check the return value when get the private structure pointer. Remove the useless check. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix error return valuesHou Zhiqiang1-3/+3
Some error return values in the host controller driver are either unconventional or plain wrong. Update them all with the expected return values. Signed-off-by: Hou Zhiqiang <Zhinqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Refactor the MEM/IO outbound window initializationHou Zhiqiang1-10/+10
Move the resource type check into an if/else block and only set-up the outbound window for MEM and IO resource. No functional change intended. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Make some register updates more readableHou Zhiqiang1-18/+25
To make some register updates more readable use a temporary value to hold the register value and carry out the update. Change the register update sequence to: - Read out the original value from the target register - Update the value - Program the updated value back to the register Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Reformat the code for readabilityHou Zhiqiang1-101/+107
Reformat the code to make it more readable. No functional change intended. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Fix devfn check in mobiveil_pcie_valid_device()Hou Zhiqiang1-1/+1
Current check for devfn number in mobiveil_pci_valid_device() is wrong in that it flags as invalid functions present in PCI device 0 in the root bus while it is perfectly valid to access all functions in PCI device 0 in the root bus. Update the check in mobiveil_pci_valid_device() to fix the issue. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbersHou Zhiqiang1-0/+6
The reset value of Primary, Secondary and Subordinate bus numbers is zero which is a broken setup. Program a sensible default value for Primary/Secondary/Subordinate bus numbers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move IRQ chained handler setup out of DT parseHou Zhiqiang1-2/+2
The irq_set_chained_handler_and_data() call is not dependent on device tree firmware so it should be moved out of the DT parsing function for clarity. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: rewritten commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move the link up waiting out of mobiveil_host_init()Hou Zhiqiang1-8/+7
The host initializing sequence does not depend on the PCIe link being up, so move the link up check right before the code scanning the root bus for enumeration. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix the Class Code fieldHou Zhiqiang1-3/+6
Fix up the Class Code field in PCI configuration space and set it to PCI_CLASS_BRIDGE_PCI. Move the Class Code fixup to function mobiveil_host_init() where it belongs. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Use the 1st inbound window for MEM inbound transactionsHou Zhiqiang1-1/+1
The inbound and outbound windows have completely separate control registers sets in the host controller MMIO space. Windows control register are accessed through an MMIO base address and an offset that depends on the window index. Since inbound and outbound windows control registers are completely separate there is no real need to use different window indexes in the inbound/outbound windows initialization routines to prevent clashing. To fix this inconsistency, change the MEM inbound window index to 0, mirroring the outbound window set-up. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: update commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound windowHou Zhiqiang1-3/+2
As the .map_bus() use the WIN_NUM_0 for CFG transactions, it is appropriate to pass WIN_NUM_0 explicitly when initializing the CFG outbound window rather than implicitly relying on the ob_wins_configure counter. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Update the resource list traversal functionHou Zhiqiang1-2/+2
Code that executes the resource list traversal does not need to delete any node therefore using the *_safe() API version is useless. Replace function resource_list_for_each_entry_safe() with the resource_list_for_each_entry() counterpart. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix PCI base address in MEM/IO outbound windowsHou Zhiqiang1-2/+3
The outbound memory windows PCI base addresses should be taken from the 'ranges' property of DT node to setup MEM/IO outbound windows decoding correctly instead of being hardcoded to zero. Update the code to retrieve the PCI base address for each range and use it to program the outbound windows address decoders Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSIHou Zhiqiang1-1/+1
The Mobiveil internal MSI controller requires separate target addresses, one per MSI vector; this is clearly incompatible with the Multiple MSI feature, which requires the same target address for all vectors requested by an endpoint (ie the Message Address field in the MSI Capability structure), so the multi MSI feature is clearly not supported by the host controller driver. Remove the flag MSI_FLAG_MULTI_PCI_MSI and with it multi MSI support, fixing the misconfiguration. Fixes: 1e913e58335f ("PCI: mobiveil: Add MSI support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Unify register accessorsHou Zhiqiang1-55/+124
It is confusing to have two sets of functions to read/write registers, some with csr_readl()/csr_writel(), while others with read_paged_register()/write_paged_register(). In the register space the lower 3KB of 4KB PCIe configure space can be accessed directly and higher 1KB through a simple paging mechanism. Unify the register accessors in csr_readl() and csr_writel() by comparing the register offset with page access boundary 3KB in the accessor internal so that the paging mechanism is hidden behind the csr_read()/write() common function calls. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-05PCI: imx6: Simplify Kconfig depends onLeonard Crestez1-1/+1
The imx6 driver can be used on imx6sx without enabling support for imx6q or imx7d but the "depends on" condition doesn't allow that. Instead of making the condition even longer just make it depend on "ARCH_MXC || COMPILE_TEST" instead. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
2019-07-05PCI: hv: Fix a use-after-free bug in hv_eject_device_work()Dexuan Cui1-6/+9
Fix a use-after-free in hv_eject_device_work(). Fixes: 05f151a73ec2 ("PCI: hv: Fix a memory leak in hv_eject_device_work()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org
2019-07-05PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30Vidya Sagar1-2/+5
The PCI Tegra controller conversion to a device tree configurable driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver to drivers/pci/host") implied that code for the driver can be compiled in for a kernel supporting multiple platforms. Unfortunately, a blind move of the code did not check that some of the quirks that were applied in arch/arm (eg enabling Relaxed Ordering on all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID for both Vendor-ID and Device-ID) are now applied in all kernels that compile the PCI Tegra controlled driver, DT and ACPI alike. This is completely wrong, in that enablement of Relaxed Ordering is only required by default in Tegra20 platforms as described in the Tegra20 Technical Reference Manual (available at https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in Section 34.1, where it is mentioned that Relaxed Ordering bit needs to be enabled in its root ports to avoid deadlock in hardware) and in the Tegra30 platforms for the same reasons (unfortunately not documented in the TRM). There is no other strict requirement on PCI devices Relaxed Ordering enablement on any other Tegra platforms or PCI host bridge driver. Fix this quite upsetting situation by limiting the vendor and device IDs to which the Relaxed Ordering quirk applies to the root ports in question, reported above. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-07-05PCI: tegra: Change link retry log level to debugManikanta Maddireddy1-1/+1
Driver checks for link up three times before giving up, each retry attempt is printed as an error. Letting users know that PCIe link is down and in the process of being brought up again is for debug, not an error condition. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-19 14:26:30 +0300