summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25PCI: tegra194: Fix link up retry sequenceVidya Sagar1-1/+1
[ Upstream commit e05fd6ae77c3e2cc0dba283005d24b6d56d2b1fa ] Add the missing DLF capability offset while clearing DL_FEATURE_EXCHANGE_EN bit during link up retry. Link: https://lore.kernel.org/r/20220721142052.25971-15-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25PCI: tegra194: Fix Root Port interrupt handlingVidya Sagar1-24/+22
[ Upstream commit 6646e99bcec627e866bc84365af37942c72b4b76 ] As part of Root Port interrupt handling, level-0 register is read first and based on the bits set in that, corresponding level-1 registers are read for further interrupt processing. Since both these values are currently read into the same 'val' variable, checking level-0 bits the second time around is happening on the 'val' variable value of level-1 register contents instead of freshly reading the level-0 value again. Fix by using different variables to store level-0 and level-1 registers contents. Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14PCI: qcom: Fix unbalanced PHY init on probe errorsJohan Hovold1-1/+3
commit 83013631f0f9961416abd812e228c8efbc2f6069 upstream. Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14PCI: qcom: Fix runtime PM imbalance on probe errorsJohan Hovold1-4/+1
commit 87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream. Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14PCI: imx6: Fix PERST# start-up sequenceFrancesco Dolcini1-9/+14
[ Upstream commit a6809941c1f17f455db2cf4ca19c6d8c8746ec25 ] According to the PCIe standard the PERST# signal (reset-gpio in fsl,imx* compatible dts) should be kept asserted for at least 100 usec before the PCIe refclock is stable, should be kept asserted for at least 100 msec after the power rails are stable and the host should wait at least 100 msec after it is de-asserted before accessing the configuration space of any attached device. From PCIe CEM r2.0, sec 2.6.2 T-PVPERL: Power stable to PERST# inactive - 100 msec T-PERST-CLK: REFCLK stable before PERST# inactive - 100 usec. From PCIe r5.0, sec 6.6.1 With a Downstream Port that does not support Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms before sending a Configuration Request to the device immediately below that Port. Failure to do so could prevent PCIe devices to be working correctly, and this was experienced with real devices. Move reset assert to imx6_pcie_assert_core_reset(), this way we ensure that PERST# is asserted before enabling any clock, move de-assert to the end of imx6_pcie_deassert_core_reset() after the clock is enabled and deemed stable and add a new delay of 100 msec just afterward. Link: https://lore.kernel.org/all/20220211152550.286821-1-francesco.dolcini@toradex.com Link: https://lore.kernel.org/r/20220404081509.94356-1-francesco.dolcini@toradex.com Fixes: bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064Ansuel Smith1-1/+3
commit 2cfef1971aea6119ee27429181d6cb3383031ac2 upstream. The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices. It was tested that while apq doesn't require the padding, ipq SoC must use it or the kernel hangs on boot. Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0") Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0Ansuel Smith1-0/+13
[ Upstream commit d3d4d028afb785e52c55024d779089654f8302e7 ] Qsdk U-Boot can incorrectly leave the PCIe interface in an undefined state if bootm command is used instead of bootipq. This is caused by the not deinit of PCIe when bootm is called. Reset the PCIe before init anyway to fix this U-Boot bug. Link: https://lore.kernel.org/r/20200901124955.137-1-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01PCI: tegra194: Fix runtime PM imbalance on errorDinghao Liu1-3/+2
[ Upstream commit 1c1dbb2c02623db18a50c61b175f19aead800b4e ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Link: https://lore.kernel.org/r/20200521031355.7022-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Add missing reset for ipq806xAnsuel Smith1-0/+12
[ Upstream commit ee367e2cdd2202b5714982739e684543cd2cee0e ] Add missing ext reset used by ipq8064 SoC in PCIe qcom driver. Link: https://lore.kernel.org/r/20200615210608.21469-5-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Change duplicate PCI reset to phy resetAbhishek Sahu1-10/+8
[ Upstream commit dd58318c019f10bc94db36df66af6c55d4c0cbba ] The deinit issues reset_control_assert for PCI twice and does not contain phy reset. Link: https://lore.kernel.org/r/20200615210608.21469-4-ansuelsmth@gmail.com Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03PCI: qcom: Add missing ipq806x clocks in PCIe driverAnsuel Smith1-5/+33
[ Upstream commit 8b6f0330b5f9a7543356bfa9e76d580f03aa2c1e ] Aux and Ref clk are missing in PCIe qcom driver. Add support for this optional clks for ipq8064/apq8064 SoC. Link: https://lore.kernel.org/r/20200615210608.21469-2-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21PCI: qcom: Add support for tx term offset for rev 2.1.0Ansuel Smith1-1/+16
commit de3c4bf648975ea0b1d344d811e9b0748907b47c upstream. Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7. Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21PCI: qcom: Define some PARF params needed for ipq8064 SoCAnsuel Smith1-0/+24
commit 5149901e9e6deca487c01cc434a3ac4125c7b00b upstream. Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization needed on some ipq8064 based device (Netgear R7800 for example). Without this the system locks on kernel load. Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up linkMarc Zyngier1-2/+2
[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ] The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc). According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as: "Sets all internal timers to fast mode for simulation purposes." it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not. Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem. Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Marc Zyngier <maz@kernel.org> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24PCI: dwc: Fix inner MSI IRQ domain registrationMarc Zyngier1-0/+2
[ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ] On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected: debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present! This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain. Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI". Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOMBjorn Andersson1-1/+7
commit 604f3956524a6a53c1e3dd27b4b685b664d181ec upstream. There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit the fixup to only affect the relevant PCIe bridges. Fixes: 322f03436692 ("PCI: qcom: Use default config space read function") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11PCI: keystone: Fix error handling when "num-viewport" DT property is not ↵Kishon Vijay Abraham I1-1/+1
populated commit b0de922af53eede340986a2d05b6cd4b6d6efa43 upstream. Fix error handling when "num-viewport" DT property is not populated. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11PCI: keystone: Fix link training retries initiationYurii Monakov1-1/+1
commit 6df19872d881641e6394f93ef2938cffcbdae5bb upstream. ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so link training was not triggered more than once after startup. In configurations where link can be unstable during early boot, for example, under low temperature, it will never be established. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Signed-off-by: Yurii Monakov <monakov.y@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Andrew Murray <andrew.murray@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11PCI: keystone: Fix outbound region mappingYurii Monakov1-1/+1
commit 2d0c3fbe43fa0e6fcb7a6c755c5f4cd702c0d2f4 upstream. The Keystone outbound Address Translation Unit (ATU) maps PCI MMIO space in 8 MB windows. When programming the ATU windows, we previously incremented the starting address by 8, not 8 MB, so all the windows were mapped to the first 8 MB. Therefore, only 8 MB of MMIO space was accessible. Update the loop so it increments the starting address by 8 MB, not 8, so more MMIO space is accessible. Fixes: e75043ad9792 ("PCI: keystone: Cleanup outbound window configuration") Link: https://lore.kernel.org/r/20191004154811.GA31397@monakov-y.office.kontur-niirs.ru Signed-off-by: Yurii Monakov <monakov.y@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17PCI: dwc: Fix find_next_bit() usageNiklas Cassel1-5/+6
commit 1137e61dcb99f7f8b54e77ed83f68b5b485a3e34 upstream. find_next_bit() takes a parameter of size long, and performs arithmetic that assumes that the argument is of size long. Therefore we cannot pass a u32, since this will cause find_next_bit() to read outside the stack buffer and will produce the following print: BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0 Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()") Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17PCI: amlogic: Fix probed clock namesNeil Armstrong1-3/+3
commit eacaf7dcf08eb062a1059c6c115fa3fced3374ae upstream. Fix the clock names used in the probe function according to the bindings. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-24Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas7-42/+1854
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-24Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas4-9/+8
- Propagate regulator_get_optional() errors so callers can distinguish real errors from optional regulators that are absent (Thierry Reding) - Propagate devm_of_phy_get() errors so callers can distinguish real errors from optional PHYs that are absent (Thierry Reding) - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi) * remotes/lorenzo/pci/misc: MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: iproc: Propagate errors for optional PHYs PCI: histb: Propagate errors for optional regulators PCI: armada8x: Propagate errors for optional PHYs PCI: imx6: Propagate errors for optional regulators PCI: exynos: Propagate errors for optional PHYs PCI: rockchip: Propagate errors for optional regulators
2019-09-24Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas3-3/+21
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
2019-09-24Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas1-0/+33
- Reduce i.MX 6Quad DBI register length to avoid aborts from accessing invalid registers (Stefan Agner) * remotes/lorenzo/pci/imx: PCI: imx6: Limit DBI register length
2019-09-24Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas2-3/+5
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
2019-09-20PCI: tegra: Add support to enable slot regulatorsVidya Sagar1-0/+83
Add support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-20PCI: tegra: Add support to configure sideband pinsVidya Sagar1-2/+10
Add support to configure sideband signal pins when the information is present in the respective controller device-tree node. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in YueHaibing's fix for build error without CONFIG_PINCTRL; https://lore.kernel.org/r/20190920014807.38288-1-yuehaibing@huawei.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron2-0/+24
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron2-0/+377
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-08PCI: tegra: Add Tegra194 PCIe supportVidya Sagar4-1/+1653
Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-09-04PCI: histb: Propagate errors for optional regulatorsThierry Reding1-2/+2
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org>
2019-09-04PCI: armada8x: Propagate errors for optional PHYsThierry Reding1-4/+3
devm_of_phy_get_by_index() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get_by_index() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-09-04PCI: imx6: Propagate errors for optional regulatorsThierry Reding1-2/+2
regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com
2019-09-04PCI: exynos: Propagate errors for optional PHYsThierry Reding1-1/+1
devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-22PCI: dwc: Return directly when num-lanes is not foundHou Zhiqiang1-2/+4
The num-lanes is optional since it is not needed on some platforms that bring up the link in firmware. The link programming is based on the num-lanes properties (which is optional); if it is not present code must return instead of fiddling with the lanes value to print an error message. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-21PCI: kirin: Make structure kirin_dw_pcie_ops constantNishka Dasgupta1-1/+1
Static variable kirin_dw_pcie_ops, of type dw_pcie_ops, is used only once, when it is assigned to the constant field ops of variable pci (having type dw_pcie) so kirin_dw_pcie_ops is never modified. Make it constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-15PCI: imx6: Limit DBI register lengthStefan Agner1-0/+33
Define the length of the DBI registers and limit config space to its length. This makes sure that the kernel does not access registers beyond that point, avoiding the following abort on a i.MX 6Quad: # cat /sys/devices/soc0/soc/1ffc000.pcie/pci0000\:00/0000\:00\:00.0/config [ 100.021433] Unhandled fault: imprecise external abort (0x1406) at 0xb6ea7000 ... [ 100.056423] PC is at dw_pcie_read+0x50/0x84 [ 100.060790] LR is at dw_pcie_rd_own_conf+0x44/0x48 ... Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2019-08-14PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separatelyXiaowei Bao2-3/+20
Add CONFIG_PCI_LAYERSCAPE_EP so that endpoint and host controller drivers can be built separately. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-08-14PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driverXiaowei Bao1-0/+1
The layerscape PCIe controller have 4 BARs. BAR0 and BAR1 are 32bit, BAR2 and BAR4 are 64bit and that's a fixed hardware configuration. Set the bar_fixed_64bit variable accordingly. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-08-13PCI: dwc: Add support to enable CDM register checkVidya Sagar2-0/+16
Add support to enable CDM (Configuration Dependent Module) register check for any data corruption based on the DT property 'snps,enable-cdm-check'. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-08-13PCI: dwc: Export dw_pcie_wait_for_link() APIVidya Sagar1-0/+1
Export the dw_pcie_wait_for_link() function to be able to build drivers using it as loadable modules. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-08-13PCI: dwc: Add extended configuration space capability search APIVidya Sagar2-0/+42
Add extended configuration space capability search API using struct dw_pcie* pointer. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-08-13PCI: dwc: Move config space capability search APIVidya Sagar3-35/+43
Move PCIe config space capability search API to common DesignWare file as this can be used by both host and EP mode drivers. Signed-off-by: Vidya Sagar <vidyaos@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-08-13PCI: dwc: Group DBI registers writes requiring unlockingVidya Sagar1-6/+8
Some of DesignWare core's DBI registers (a.k.a configuration space registers) are write-protected with a lock without enabling which they are read-only by default. These write-protected registers are implementation specific. Tegra194's BAR-0 register which is at offset 0x10 in the configuration space is an example. Current implementation in dw_pcie_setup_rc() API attempts to unlock those write-protected registers whenever they are updated and lock them back again for writing. Group all write-protected registers writes so that locking and unlocking is performed once to avoid bloating the code with multiple unlock/lock sequences for all those write-protected registers. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2019-07-13Merge branch 'pci/trivial'Bjorn Helgaas2-2/+2
- Fix typos and whitespace errors (Bjorn Helgaas) * pci/trivial: PCI: Fix typos and whitespace errors
2019-07-13Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-61/+54
- Move qcom driver to bulk clock API (Bjorn Andersson) - Add Qualcomm QCS404 PCIe controller support (Bjorn Andersson) - Ensure Qualcomm PERST is asserted for at least 100ms (Niklas Cassel) * remotes/lorenzo/pci/qcom: PCI: qcom: Ensure that PERST is asserted for at least 100 ms PCI: qcom: Add QCS404 PCIe controller support dt-bindings: PCI: qcom: Add QCS404 to the binding PCI: qcom: Use clk bulk API for 2.4.0 controllers
2019-07-13Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas5-35/+80
- Add dwc API support to de-initialize host (Vidya Sagar) - Clean up dwc DBI,ATU read and write APIs (Vidya Sagar) - Export dwc APIs to support .remove() so drivers can be modular (Vidya Sagar) - Simplify imx6 Kconfig dependencies (Leonard Crestez) - Fix dra7xx build error when !CONFIG_GPIOLIB (YueHaibing) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: imx6: Simplify Kconfig depends on PCI: dwc: Export APIs to support .remove() implementation PCI: dwc: Cleanup DBI,ATU read and write APIs PCI: dwc: Add API support to de-initialize host
2019-07-09PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIBYueHaibing1-0/+1
If CONFIG_GPIOLIB is not selected the compilation results in the following build errors: drivers/pci/controller/dwc/pci-dra7xx.c: In function dra7xx_pcie_probe: drivers/pci/controller/dwc/pci-dra7xx.c:777:10: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Fix them by including the appropriate header file. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas2-2/+2
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 09:24:35 +0300