summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2024-09-13PCI: qcom: Add equalization settings for 16.0 GT/sShashank Babu Chinta Venkata1-0/+5
During high data transmission rates such as 16.0 GT/s, there is an increased risk of signal loss due to poor channel quality and interference. This can impact receiver's ability to capture signals accurately. Hence, as signal compensation is achieved through appropriate lane equalization, apply lane equalization settings at both transmitter and receiver which results in an increase in the PCIe signal strength. While at it, modify the pcie-tegra194 driver to make use of the common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h. Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com> [mani: dropped the code refactoring and minor changes] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-10PCI: dw-rockchip: Add endpoint mode supportNiklas Cassel1-4/+18
The PCIe controller in rk3568 and rk3588 can operate in endpoint mode. This endpoint mode support heavily leverages the existing code in pcie-designware-ep.c. Add support for endpoint mode to the existing pcie-dw-rockchip glue driver. [kwilczynski: squash with patch adding the PCI_ENDPOINT dependency] Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-16PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVEConor Dooley1-1/+1
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the SiFive PCI drivers to use the newer symbol. Link: https://lore.kernel.org/linux-pci/20230918-safeness-cornflake-62278bc3aaaa@wendy Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-23PCI: rcar-gen4: Add endpoint mode supportYoshihiro Shimoda1-0/+11
Add R-Car Gen4 PCIe controller for endpoint mode. This controller is based on Synopsys DesignWare PCIe. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-14-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host modeYoshihiro Shimoda1-0/+14
Add R-Car Gen4 PCIe controller support for host mode. This controller is based on Synopsys DesignWare PCIe. However, this particular controller has a number of vendor-specific registers, and as such, requires initialization code like mode setting and retraining and so on. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-04-21PCI: dwc: Sort Kconfig entries by vendorBjorn Helgaas1-203/+203
Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig. Link: https://lore.kernel.org/r/20230418174336.145585-7-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-04-21PCI: Use consistent controller Kconfig menu entry languageBjorn Helgaas1-27/+27
Use "PCIe controller" consistently instead of "host bridge", "bus driver", etc. Annotate with "(host mode)" or "(endpoint mode)" as needed. Link: https://lore.kernel.org/r/20230418174336.145585-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-04-21PCI: meson: Add 'Amlogic' to Kconfig promptBjorn Helgaas1-1/+1
Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts. Link: https://lore.kernel.org/r/20230418174336.145585-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Yue Wang <yue.wang@Amlogic.com>
2023-03-10PCI: kirin: Select REGMAP_MMIOJosh Triplett1-0/+1
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces a linker failure looking for __devm_regmap_init_mmio_clk(). Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett <josh@joshtriplett.org> [lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org # 5.16+
2023-02-25Merge tag 'pci-v6.3-changes' of ↵Linus Torvalds1-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...
2023-01-16PCI: imx6: Add i.MX PCIe EP mode supportRichard Zhu1-1/+22
i.MX PCIe is one dual mode PCIe controller. Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root Complex mode and Endpoint mode. Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2023-01-04PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAINLukas Bulwahn1-1/+1
a474d3fbe287 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead. ba6ed462dcf4 ("PCI: dwc: Add Baikal-T1 PCIe controller support") independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN. Both commits appeared in v6.2-rc1, so the latter missed the conversion from PCI_MSI_IRQ_DOMAIN to PCI_MSI. Update PCIE_BT1 to depend on PCI_MSI instead. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2022-12-14Merge tag 'pci-v6.2-changes' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and make more things static. - Make portdrv bind to Switch Ports that have AER. Previously, if these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant the Ports couldn't be suspended to low-power states. AER on these Ports doesn't use interrupts, and the AER driver doesn't need to claim them. - Assign PCI domain IDs using ida_alloc(), which makes host bridge add/remove work better. Resource management: - To work better with recent BIOSes that use EfiMemoryMappedIO for PCI host bridge apertures, remove those regions from the E820 map (E820 entries normally prevent us from allocating BARs). In v5.19, we added some quirks to disable E820 checking, but that's not very maintainable. EfiMemoryMappedIO means the OS needs to map the region for use by EFI runtime services; it shouldn't prevent OS from using it. PCIe native device hotplug: - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. - Enable Command Completed Interrupt only if supported to avoid user confusion from lspci output that says this is enabled but not supported. - Prevent pciehp from binding to Switch Upstream Ports; this happened because of interaction with acpiphp and caused devices below the Upstream Port to disappear. Power management: - Convert AGP drivers to generic power management. We hope to remove legacy power management from the PCI core eventually. Virtualization: - Fix pci_device_is_present(), which previously always returned "false" for VFs, causing virtio hangs when unbinding the driver. Miscellaneous: - Convert drivers to gpiod API to prepare for dropping some legacy code. - Fix DOE fencepost error for the maximum data object length. Baikal-T1 PCIe controller driver: - Add driver and DT bindings. Broadcom STB PCIe controller driver: - Enable Multi-MSI. - Delay 100ms after PERST# deassert to allow power and clocks to stabilize. - Configure Read Completion Boundary to 64 bytes. Freescale i.MX6 PCIe controller driver: - Initialize PHY before deasserting core reset to fix a regression in v6.0 on boards where the PHY provides the reference. - Fix imx6sx and imx8mq clock names in DT schema. Intel VMD host bridge driver: - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe SSDs in VT-d pass-through scenarios. - Disable MSI remapping, which gets re-enabled by firmware during suspend/resume. MediaTek PCIe Gen3 controller driver: - Add MT7986 and MT8195 support. Qualcomm PCIe controller driver: - Add SC8280XP/SA8540P basic interconnect support. Rockchip DesignWare PCIe controller driver: - Base DT schema on common Synopsys schema. Synopsys DesignWare PCIe core: - Collect DT items shared between Root Port and Endpoint (PERST GPIO, PHY info, clocks, resets, link speed, number of lanes, number of iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml. - Add dma-ranges support for Root Ports and Endpoints. - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to reduce code duplication. - Add generic names for clocks and resets to encourage more consistent naming across drivers using DesignWare IP. - Stop advertising PTM Responder role for Endpoints, which aren't allowed to be responders. TI J721E PCIe driver: - Add j721s2 host mode ID to DT schema. - Add interrupt properties to DT schema. Toshiba Visconti PCIe controller driver: - Fix interrupts array max constraints in DT schema" * tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits) x86/PCI: Use pr_info() when possible x86/PCI: Fix log message typo x86/PCI: Tidy E820 removal messages PCI: Skip allocate_resource() if too little space available efi/x86: Remove EfiMemoryMappedIO from E820 map PCI/portdrv: Allow AER service only for Root Ports & RCECs PCI: xilinx-nwl: Fix coding style violations PCI: mvebu: Switch to using gpiod API PCI: pciehp: Enable Command Completed Interrupt only if supported PCI: aardvark: Switch to using devm_gpiod_get_optional() dt-bindings: PCI: mediatek-gen3: add support for mt7986 dt-bindings: PCI: mediatek-gen3: add SoC based clock config dt-bindings: PCI: qcom: Allow 'dma-coherent' property PCI: mt7621: Add sentinel to quirks table PCI: vmd: Fix secondary bus reset for Intel bridges PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32) PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path ...
2022-11-23PCI: dwc: Add Baikal-T1 PCIe controller supportSerge Semin1-0/+9
Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be trained to work up to Gen.3 speed over up to x4 lanes. The host controller is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its turn is connected to the DWC 10G PHY. The whole system is supposed to be fed up with four clock sources: DBI peripheral clock, AXI application clocks and external PHY/core reference clock generating the 100MHz signal. In addition to that the platform provide a way to reset each part of the controller: sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and Hot/Power reset signal. The driver also provides a way to handle the GPIO-based PERST# signal. Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI interface accessors which make sure the IO operations are dword-aligned. Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-11-17PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAINThomas Gleixner1-24/+24
What a zoo: PCI_MSI select GENERIC_MSI_IRQ PCI_MSI_IRQ_DOMAIN def_bool y depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are just an indirection to PCI_MSI. Match the reality and just admit that PCI_MSI requires GENERIC_MSI_IRQ_DOMAIN. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
2021-11-05Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-0/+10
- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan Sadhasivam) - Add qcom struct for device-specific details in match data (Prasad Malisetty) - Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in SC7280 (Prasad Malisetty) - Add .compatible device ID for SC8180x platform (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add sc8180x compatible PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 PCI: qcom: Replace ops with struct pcie_cfg in pcie match data MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller
2021-11-05Merge branch 'pci/host/kirin'Bjorn Helgaas1-1/+1
- Reorganize to separate out PHY logic (Mauro Carvalho Chehab) - Add support for external PHY in addition to the internal PHY (Mauro Carvalho Chehab) - Use regmap so both kirin driver and PHY can access APB registers (Mauro Carvalho Chehab) - Add support for per-lane PERST# GPIOs on HiKey970 external PEX 8606 PCI bridge (Mauro Carvalho Chehab) - Add "hisilicon,kirin970-pcie" compatible string (Mauro Carvalho Chehab) - Add MODULE_* macros (Mauro Carvalho Chehab) - Allow building as a module (Mauro Carvalho Chehab) - Add power_off support for Kirin 960 PHY (Mauro Carvalho Chehab) - Disable clkreq during poweroff sequence (Mauro Carvalho Chehab) - De-init the dwc driver during remove (Mauro Carvalho Chehab) - Allow removal of kirin driver (Mauro Carvalho Chehab) * pci/host/kirin: PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: kirin: Use regmap for APB registers PCI: kirin: Add support for a PHY layer PCI: kirin: Reorganize the PHY logic inside the driver
2021-11-04PCI: kirin: Allow building it as a moduleMauro Carvalho Chehab1-1/+1
There's nothing preventing this driver from being loaded as a module. Change its config from bool to tristate. Link: https://lore.kernel.org/r/b5e7cfe9df09b492750bd6db0f0c911eaae8c2d4.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Xiaowei Song <songxiaowei@hisilicon.com>
2021-10-11PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driverManivannan Sadhasivam1-0/+10
Add driver for Qualcomm PCIe Endpoint controller based on the DesignWare core with added Qualcomm-specific wrapper around the core. The driver support is very basic such that it supports only enumeration, PCIe read/write, and MSI. There is no ASPM and PM support for now but these will be added later. The driver is capable of using the PERST# and WAKE# side-band GPIOs for operation and written on top of the DWC PCI framework. [bhelgaas: wrap a few long lines] Co-developed-by: Siddartha Mohanadoss <smohanad@codeaurora.org> [mani: restructured the driver and fixed several bugs for upstream] Link: https://lore.kernel.org/r/20210920065946.15090-3-manivannan.sadhasivam@linaro.org Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-10-07PCI: dwc: Clean up Kconfig dependencies (PCIE_DW_EP)Andy Shevchenko1-2/+1
The "depends on" Kconfig construct is a no-op in options that are selected and therefore has no effect. Remove it. Clean up the users of PCIE_DW_EP and introduce idiom depends on PCI_ENDPOINT select PCIE_DW_EP for all of them. Link: https://lore.kernel.org/r/20210623140103.47818-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-10-07PCI: dwc: Clean up Kconfig dependencies (PCIE_DW_HOST)Andy Shevchenko1-5/+4
The "depends on" Kconfig construct is a no-op in options that are selected and therefore has no effect. Remove it. Furthermore, there is no need to repeat menu dependencies (PCI). Clean up the users of PCIE_DW_HOST and introduce idiom depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST for all of them. Link: https://lore.kernel.org/r/20210623140103.47818-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-09-30PCI: dra7xx: Make it a kernel moduleLuca Ceresoli1-3/+3
Enable building the driver as a loadable kernel module. Link: https://lore.kernel.org/r/20210531085934.2662457-3-luca@lucaceresoli.net Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2021-09-02Merge branch 'remotes/lorenzo/pci/keembay'Bjorn Helgaas1-0/+28
- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth Thokala) * remotes/lorenzo/pci/keembay: PCI: keembay: Add support for Intel Keem Bay dt-bindings: PCI: Add Intel Keem Bay PCIe controller
2021-09-02Merge branch 'pci/visconti'Bjorn Helgaas1-0/+9
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) * pci/visconti: MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver
2021-08-31PCI: rockchip-dwc: Add Rockchip RK356X host controller driverSimon Xue1-0/+11
Add a driver for the DesignWare-based PCIe controller found on RK356X. The existing pcie-rockchip-host driver is only used for the Rockchip-designed IP found on RK3399. Link: https://lore.kernel.org/r/20210625065511.1096935-1-xxm@rock-chips.com Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-08-31PCI: visconti: Add Toshiba Visconti PCIe host controller driverNobuhiro Iwamatsu1-0/+9
Add support for the PCIe RC controller on Toshiba Visconti ARM SoCs. This PCIe controller is based on the Synopsys DesignWare PCIe core. Link: https://lore.kernel.org/r/20210811083830.784065-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-08-20PCI: keembay: Add support for Intel Keem BaySrikanth Thokala1-0/+28
Add driver for Intel Keem Bay SoC PCIe controller. This controller is based on DesignWare PCIe core. In Root Complex mode, only internal reference clock is possible for Keem Bay A0. For Keem Bay B0, external reference clock can be used and will be the default configuration. Currently, keembay_pcie_of_data structure has one member. It will be expanded later to handle this difference. Endpoint mode link initialization is handled by the boot firmware. Link: https://lore.kernel.org/r/20210805211010.29484-3-srikanth.thokala@intel.com Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-05-04Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-1/+1
- Make several tegra symbols const (Rikard Falkeborn) - Fix tegra Kconfig host/endpoint typo (Wesley Sheng) - Fix runtime PM imbalance (Dinghao Liu) * remotes/lorenzo/pci/tegra: PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert() PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194 PCI: tegra: Constify static structs
2021-05-04Merge branch 'remotes/lorenzo/pci/risc-v'Bjorn Helgaas1-0/+9
- sifive: Add pcie_aux clock to prci driver (Greentime Hu) - sifive: Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) * remotes/lorenzo/pci/risc-v: riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
2021-05-04PCI: fu740: Add SiFive FU740 PCIe host controller driverPaul Walmsley1-0/+9
Add driver for the SiFive FU740 PCIe host controller. This controller is based on the DesignWare PCIe core. Co-developed-by: Henry Styles <hes@sifive.com> Co-developed-by: Erik Danie <erik.danie@sifive.com> Co-developed-by: Greentime Hu <greentime.hu@sifive.com> Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Henry Styles <hes@sifive.com> Signed-off-by: Erik Danie <erik.danie@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-22PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194Wesley Sheng1-1/+1
In config PCIE_TEGRA194_EP the mode incorrectly is referred to as host mode. Fix it. Link: https://lore.kernel.org/r/20201231032539.22322-1-wesley.sheng@amd.com Signed-off-by: Wesley Sheng <wesley.sheng@amd.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-03-12PCI: al: Select CONFIG_PCI_ECAMArnd Bergmann1-0/+1
Compile-testing this driver without ECAM support results in a link failure: ld.lld: error: undefined symbol: pci_ecam_map_bus >>> referenced by pcie-al.c >>> pci/controller/dwc/pcie-al.o:(al_pcie_map_bus) in archive drivers/built-in.a Select CONFIG_ECAM like the other drivers do. Link: https://lore.kernel.org/r/20210308152501.2135937-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2020-12-16Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas1-2/+2
- Enable keystone compile testing on non-ARM arches (Alex Dewar) * remotes/lorenzo/pci/keystone: PCI: keystone: Enable compile-testing on !ARM
2020-12-09PCI: qcom: Add support for configuring BDF to SID mapping for SM8250Manivannan Sadhasivam1-0/+1
For SM8250, we need to write the BDF to SID mapping in PCIe controller register space for proper working. This is accomplished by extracting the BDF and SID values from "iommu-map" property in DT and writing those in the register address calculated from the hash value of BDF. In case of collisions, the index of the next entry will also be written. For the sake of it, let's introduce a "config_sid" callback and do it conditionally for SM8250. Link: https://lore.kernel.org/r/20201208121402.178011-4-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-01PCI: dwc: exynos: Rework the driver to support Exynos5433 variantJaehoon Chung1-2/+7
Exynos5440 SoC support has been dropped since commit 8c83315da1cf ("ARM: dts: exynos: Remove Exynos5440"). Rework this driver to support DWC PCIe variant found in the Exynos5433 SoCs. The main difference in Exynos5433 variant is lack of the MSI support (the MSI interrupt is not even routed to the CPU). [mszyprow: reworked the driver to support only Exynos5433 variant, simplified code, rebased onto current kernel code, added regulator support, converted to the regular platform driver, removed MSI related code, rewrote commit message, added help] Link: https://lore.kernel.org/r/20201113170139.29956-6-m.szyprowski@samsung.com Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2020-11-19PCI: keystone: Enable compile-testing on !ARMAlex Dewar1-2/+2
Currently the Keystone driver can only be compile-tested on ARM, but this restriction seems unnecessary. Get rid of it to increase test coverage. Build-tested with allyesconfig on x86, ppc, mips and riscv. Link: https://lore.kernel.org/r/20200906195128.279342-1-alex.dewar90@gmail.com Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org>
2020-10-05PCI: meson: Build as module by defaultKevin Hilman1-1/+2
Enable pci-meson to build as a module whenever ARCH_MESON is enabled. Link: https://lore.kernel.org/r/20200918181251.32423-1-khilman@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Cc: Yue Wang <yue.wang@amlogic.com>
2020-06-04Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas1-2/+12
- Simplify computation of msix_tbl (Jiri Slaby) - Make hisi_pcie_platform_ops static (Zou Wei) - Warn about resources above 4G (Alan Mikhak) - Make intel_pcie_cpu_addr() static (Jason Yan) - Use devm_platform_ioremap_resource_byname() to simplify code and improve error checking (Wei Yongjun) - Fix inner MSI IRQ domain registration so it doesn't confuse debugfs (Marc Zyngier) - Don't use FAST_LINK_MODE on meson (Marc Zyngier) - Add Socionext UniPhier Pro5 PCIe endpoint controller driver and DT description (Kunihiko Hayashi) * remotes/lorenzo/pci/dwc: PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() PCI: dwc: intel: Make intel_pcie_cpu_addr() static PCI: dwc: Program outbound ATU upper limit register PCI: dwc: Make hisi_pcie_platform_ops static PCI: dwc: Clean up computing of msix_tbl
2020-06-04PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driverKunihiko Hayashi1-2/+12
Add driver for the Socionext UniPhier Pro5 SoC endpoint controller. This controller is based on the DesignWare PCIe core. And add "host" to existing controller descriontions for the host controller in Kconfig. Link: https://lore.kernel.org/r/1589457801-12796-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-04-24PCI: keystone: Don't select CONFIG_PCI_KEYSTONE_HOST by defaultBjorn Helgaas1-1/+0
Drivers should not be selected by default because that bloats the kernel for people who don't need them. Remove the "default y" for CONFIG_PCI_KEYSTONE_HOST. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: linux-arm-kernel@lists.infradead.org
2020-04-24PCI: dra7xx: Don't select CONFIG_PCI_DRA7XX_HOST by defaultBjorn Helgaas1-1/+1
Drivers should not be selected by default because that bloats the kernel for people who don't need them. Enable CONFIG_PCI_DRA7XX_HOST by default only if SOC_DRA7XX. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-omap@vger.kernel.org
2020-03-31PCI: tegra: Add support for PCIe endpoint mode in Tegra194Vidya Sagar1-3/+26
Add support for the endpoint mode of Synopsys DesignWare core based dual mode PCIe controllers present in Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-01-09PCI: dwc: intel: PCIe RC controller driverDilip Kota1-0/+11
Add support to PCIe RC controller on Intel Gateway SoCs. PCIe controller is based of Synopsys DesignWare PCIe core. Intel PCIe driver requires Upconfigure support, Fast Training Sequence and link speed configurations. So adding the respective helper functions in the PCIe DesignWare framework. It also programs hardware autonomous speed during speed configuration so defining it in pci_regs.h. Also, mark Intel PCIe driver depends on MSI IRQ Domain as Synopsys DesignWare framework depends on the PCI_MSI_IRQ_DOMAIN. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-11-22PCI: Fix indentationKrzysztof Kozlowski1-3/+3
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig [bhelgaas: do same in vmd.c] Link: https://lore.kernel.org/r/20191120134036.14502-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-24Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas1-0/+10
- Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
2019-09-24Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas1-2/+18
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei Bao) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron1-0/+12
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-09-08PCI: tegra: Add Tegra194 PCIe supportVidya Sagar1-0/+10
Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-08-14PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separatelyXiaowei Bao1-2/+18
Add CONFIG_PCI_LAYERSCAPE_EP so that endpoint and host controller drivers can be built separately. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-07-05PCI: imx6: Simplify Kconfig depends onLeonard Crestez1-1/+1
The imx6 driver can be used on imx6sx without enabling support for imx6q or imx7d but the "depends on" condition doesn't allow that. Instead of making the condition even longer just make it depend on "ARCH_MXC || COMPILE_TEST" instead. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 23:03:43 +0300