summaryrefslogtreecommitdiff
path: root/drivers/parport
AgeCommit message (Collapse)AuthorFilesLines
2008-04-05parport_pc: make sure to release IO ports after probing for IT87XXLinus Torvalds1-2/+1
Commit f63fd7e299ee13da071ecfce2b90b58c5e1562b1 ("parport_pc: detection for SuperIO IT87XX POST") only released the IO port region on success, not when the probe for the IT87XX chip failed. That caused not only a reserved region to leak, but also caused an oops when the driver module was unloaded and somebody tried to cat /proc/ioports - because the string that was assigned to the IO port region was a static string in the module virtual address area. Reported-by: Lubos Lunak <l.lunak@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Petr Cvek <petr.cvek@tul.cz> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14parport: section fixupDavid Brownell1-2/+2
Fix section warning for parport_ECP_supported(); it's called from a routine exported to modules, so it can't be removed with __devinit section pruning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08parport: fix ieee1284_epp_read_addrStephan Boettcher1-1/+1
We bought cheap notebooks to control our custom data acquisition system, which requires EPP mode (read/write, data/addr). The bios does not offer EPP mode, and indeed hardware EPP mode appears not to work, although the parport driver tries to use it. EPPSWE mode does work for data r/w and addr write, but addr read requires this patch. (stephan)rshgse3: lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12) 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 08:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 08:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 08:03.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) (stephan)rshgse3: grep . /proc/sys/dev/parport/parport0/* /proc/sys/dev/parport/parport0/base-addr:888 1912 /proc/sys/dev/parport/parport0/dma:-1 /proc/sys/dev/parport/parport0/irq:7 /proc/sys/dev/parport/parport0/modes:PCSPP,TRISTATE,EPP /proc/sys/dev/parport/parport0/spintime:500 Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08mn10300: add the MN10300/AM33 architecture to the kernelDavid Howells1-1/+2
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport_pc: detection for SuperIO IT87XX POSTPetr Cvek1-6/+39
Add detection for IT87XX SuperIO chip and disabling its POST feature, which made noise on parallel port's pins. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport_serial: netmos 9855 fixChristian Pellegrin1-2/+2
Fix wrong netmos 9855 serial port configuration. On loading only one serial port was present and it wasn't working. After looking in the data sheet I realized that the base address was wrong. For further reference here is lspci and relevant dmesg output: 02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (prog-if 02) Subsystem: LSI Logic / Symbios Logic Unknown device 0022 Flags: medium devsel, IRQ 19 I/O ports at df00 [size=8] I/O ports at de00 [size=8] I/O ports at dd00 [size=8] I/O ports at dc00 [size=8] I/O ports at db00 [size=8] I/O ports at da00 [size=16] parport1: PC-style at 0xdd00 [PCSPP,TRISTATE] parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP] 0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A 0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Cc: Thomas Richter <thor@math.TU-Berlin.DE> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Martin Schitter <ms@gewi.kfunigraz.ac.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCardLuís P Mendes1-0/+5
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by: Luís P Mendes <luis.p.mendes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03Spelling fixes: lenght->lengthPaulius Zaleckas1-1/+1
Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-12-18parport: "dev->timeslice" is an unsigned long, not an intEric Dumazet1-1/+1
While auditing proc_doulongvec_ms_jiffies_minmax() usage in kernel, I found a bug in drivers/parport/procfs.c, incorrectly using sizeof(int) instead of sizeof(unsigned long) Only 64bit arches are affected by this old bug. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-24[PARPORT] Remove unused 'irq' argument from parport irq functionsJeff Garzik3-14/+4
None of the drivers with a struct pardevice's ->irq_func() hook ever used the 'irq' argument passed to it, so remove it. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24[PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt}Jeff Garzik3-3/+3
parport_ieee1284_interrupt() was not using its first arg at all. Delete. parport_generic_irq()'s second arg makes its first arg completely redundant. Delete, and use port->irq in the one place where we actually need it. Also, s/__inline__/inline/ to make the code look nicer. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24[PARPORT] Consolidate code copies into a single generic irq handlerJeff Garzik8-49/+20
Several arches used the exact same code for their parport irq handling. Make that code generic, in parport_irq_handler(). Also, s/__inline__/inline/ in include/linux/parport.h. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19sysctl: parport remove binary pathsEric W. Biederman2-62/+5
The sysctl binary paths don't look as if they even code work, .data is not filled in, and all of the proc_handlers look at extra1 and there is not strategy routine. So just kill the binary paths. In addition this patch removes the setting of extra1 on directories. It doesn't look like the parport code ever examines it, and it's bad sysctl form. [bunk@kernel.org: remove parport_device_num()] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01parport_pc locking fixAndrew Morton1-4/+0
http://bugzilla.kernel.org/show_bug.cgi?id=8821 reports a might_sleep() warning due to parport_pc_exit() running platform_device_unregister() while holding ports_lock. Just remove the locking: nobody else can access ports_list during module_exit. Cc: "Mike Sharkey" <mike@pikeaero.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20m68k: exclude more unbuildable driversAl Viro1-1/+1
anything that wants working dma-mapping won't work parport_pc won't work on m68k unless we have ISA Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2-4/+2
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16parport_pc: it887x fixNiels de Vos1-3/+2
The IO port range requested by parport_pc.c:sio_ite_8872_probe is too small. The IO-ports of ttyS1 (0x2f8) will be missconfigured by the ITE-chip. The ITE starts looking for the chip a 0x2a0. An IO-portrange of 32 will not overwrite the ports of ttyS1. Therefore register 0x60 should be written with 0xe5000000, enabling the ITE and setting IO-portsize to 32 bytes. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Use menuconfig objects: parportJan Engelhardt1-15/+11
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-27[PARISC] fix section mismatch in parport_gscHelge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-05-17parport_pc needs dma-mapping.hAndrew Morton1-0/+1
alpha: drivers/parport/parport_pc.c: In function 'parport_pc_fifo_write_block_dma': drivers/parport/parport_pc.c:636: warning: implicit declaration of function 'dma_map_single' drivers/parport/parport_pc.c:637: error: 'DMA_TO_DEVICE' undeclared (first use in this function) drivers/parport/parport_pc.c:637: error: (Each undeclared identifier is reported only once drivers/parport/parport_pc.c:637: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky1-0/+1
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-08parport_serial: fix PCI must_checksRandy Dunlap1-1/+7
drivers/parport/parport_serial.c:402: warning: ignoring return value of 'pci_enable_device', declared with attribute warn_unused_result Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08legacy PC parports support parport->devJean Delvare1-0/+39
Give legacy parallel ports a platform device in the device tree. This is a quick and dirty implementation; it doesn't actually convert the legacy parport code to the device driver model (by splitting out probing from device creation). But at least parallel port device drivers will finally have a device to work with. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08parport->dev driver model supportDavid Brownell6-16/+26
Currently a parport_driver can't get a handle on the device node for the underlying parport (PNPACPI, PCI, etc). That prevents correct placement of sysfs child nodes, which can affect things like power management. This patch adds a field to "struct parport" pointing to that device node, and updates non-legacy port drivers to initialize that device pointer. That field replaces the analagous PCI-only support in parport_pc. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24[PARPORT] SUNBPP: Fix OOPS when debugging is enabled.David S. Miller1-4/+6
The debugging code would dereference __iomem pointers instead of going through sbus_{read,write}{b,w,l}(). Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-21[PATCH] parport_pc: fix parport_pc_probe_port section warningJean Delvare1-3/+3
WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_pc_probe_port' (at offset 0x14f7) and 'parport_pc_unregister_port' parport_dma_probe() cannot be declared __devinit as it is called from parport_pc_probe_port() which isn't. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman1-3/+3
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: C99 convert ctl_tables in drivers/parport/procfs.cEric W. Biederman1-75/+189
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau2-2/+0
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-10[PATCH] Kconfig refactoring for better menu nestingDon Mullis1-3/+3
Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] parport: section mismatches with HOTPLUG=nRandy Dunlap1-4/+4
When CONFIG_HOTPLUG=n, parport_pc calls some __devinit == __init code that could be discarded. These calls are made from parport_irq_probe(), which is called from parport_pc_probe_port(), which is an exported symbol, so the calls could (possibly) happen after init time. WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_irq_probe' (at offset 0x31d) and 'parport_pc_probe_port' WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text between 'parport_irq_probe' (at offset 0x346) and 'parport_pc_probe_port' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] parport_pc: Add support for OX16PCI952 parallel portRyan Underwood1-0/+4
Add support for the parallel port (implemented as separate PCI function) on the Oxford Semiconductor OX16PCI952. Signed-off-by: Ryan Underwood <nemesis@icequake.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidationDominik Brodowski1-8/+0
struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-12-05[PATCH] pcmcia: IDs for Elan serial PCMCIA devciesTony Olech1-0/+1
Add IDs for Elan serial PCMCIA devices. In addition, move the pdaudio_cf driver from matching based on manf_id and card_id to the more specific prod_id1 and prod_id2 to avoid false positives. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-11-16[PATCH] parport: fix compilation failureArnaud Giersch1-1/+1
Fix compilation failure. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-08[PATCH] sparc32 pt_regs fixesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-07[PATCH] m68k pt_regs fixesAl Viro1-1/+1
m68k_handle_int() split in two functions: __m68k_handle_int() takes pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs *. Places where we used to call m68k_handle_int() recursively with the same pt_regs have simply lost the second argument, the rest is switched to __m68k_handle_int(). The rest of patch is just dropping pt_regs * where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells11-23/+18
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04parport: Remove space in function callsMatthew Martin1-106/+106
This removes the space in function calls in drivers/parport/daisy.c Signed-off-by: Matthew Martin <lihnucks@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03[PATCH] restore parport_pc probing on powermacOlaf Hering1-4/+0
The last change for partport_pc did fix the common case for all PowerMacs, but it broke the case for PCI multiport IO cards. In fact, the config option CONFIG_PARPORT_PC_SUPERIO=y lead to a hard crash when cups probed the parport driver. It enables the winbond and smsc probing. Remove the PARPORT_BASE check again, parport_pc_find_nonpci_ports() will take care of it. All powerpc configs should have CONFIG_PARPORT_PC_SUPERIO=n, the code did not find anything on the chrp boards we tested it on. Tested on a G4/466 with a PCI card: 0001:10:13.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at f2000800 [size=32] Region 2: I/O ports at f2000870 [size=8] Region 3: I/O ports at f2000860 [size=8] Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01[PATCH] update legacy io handling for pmacOlaf Hering1-0/+4
ppc can boot one single binary on prep, chrp and pmac boards. ppc64 can boot one single binary on pseries and G5 boards. pmac has no legacy io, probing for PC style legacy hardware (or accessing the legacy io area regulary) may lead to a hard crash: * add check for parport_pc, exit on pmac. 32bit chrp has no ->check_legacy_ioport, the probe is always called. 64bit chrp has check_legacy_ioport, check for a "parallel" node * add check for isapnp, only PReP boards may have real ISA slots. 32bit PReP will have no ->check_legacy_ioport, the probe is always called. * update code in i8042_platform_init. Run ->check_legacy_ioport first, always call request_region. No functional change. Remove whitespace before i8042_reset init. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] CONFIG_PM=n slim: drivers/parport/parport_serial.cAlexey Dobriyan1-0/+4
Remove some code which is unneeded if CONFIG_PM=n. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner3-3/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel5-5/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds4-4/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
2006-06-26remove the bouncing email address of David CampbellAdrian Bunk4-4/+4
This patch removes a bouncing email address from the kernel sources. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26[PARPORT] sunbpp: Fix typo.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25[PATCH] parport: add to kernel-docRandy Dunlap2-2/+2
Add parport interfaces to kernel-doc template. Small doc. cleanups in 2 parport source files. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] AX88796 parallel port driverBen Dooks3-1/+457
Driver for the simple parallel port interface on the Asix AX88796 chip on an platform_bus. [akpm@osdl.org: x86_64 build fix] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24[PARPORT] sunbpp: Convert to new SBUS device framework.David S. Miller1-64/+70
Signed-off-by: David S. Miller <davem@davemloft.net>