summaryrefslogtreecommitdiff
path: root/drivers/nvmem
AgeCommit message (Collapse)AuthorFilesLines
2024-03-07nvmem: core: Print error on wrong bits DT propertyMarkus Schneider-Pargmann1-0/+5
The algorithms in nvmem core are built with the constraint that bit_offset < 8. If bit_offset is greater the results are wrong. Print an error if the devicetree 'bits' property is outside of the valid range and abort parsing. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: core: make nvmem_layout_bus_type constRicardo B. Marliere1-1/+1
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the nvmem_layout_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: mtk-efuse: Drop NVMEM device nameChen-Yu Tsai1-1/+0
The MT8183 has not one but two efuse devices. The static name and ID causes the second efuse device to fail to probe, due to duplicate sysfs entries. With the rework of the mtk-socinfo driver, lookup by name is no longer necessary. The custom name can simply be dropped. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: zynqmp_nvmem: Add support to access efusePraveen Teja Kundanala1-10/+176
Add support to read/write efuse memory map of ZynqMP. Below are the offsets of ZynqMP efuse memory map 0 - SOC version(read only) 0xC - 0xFC -ZynqMP specific purpose efuses 0x100 - 0x17F - Physical Unclonable Function(PUF) efuses repurposed as user efuses Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> Acked-by: Kalyani Akula <Kalyani.akula@amd.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanupPraveen Teja Kundanala1-25/+12
- Remove static nvmem_config declaration - Remove zynqmp_nvmem_data Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> Acked-by: Kalyani Akula <Kalyani.akula@amd.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: mtk-efuse: Register MediaTek socinfo driver from efuseWilliam-tw Lin1-1/+20
The socinfo driver reads chip information from eFuses and does not need any devicetree node. Register it from mtk-efuse. While at it, also add the name for this driver's nvmem_config. Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114516.86365-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-07nvmem: meson-efuse: fix function pointer type mismatchJerome Brunet1-22/+3
clang-16 warns about casting functions to incompatible types, as is done here to call clk_disable_unprepare: drivers/nvmem/meson-efuse.c:78:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 78 | (void(*)(void *))clk_disable_unprepare, The pattern of getting, enabling and setting a disable callback for a clock can be replaced with devm_clk_get_enabled(), which also fixes this warning. Fixes: 611fbca1c861 ("nvmem: meson-efuse: add peripheral clock") Cc: Stable@vger.kernel.org Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114023.85535-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-14nvmem: include bit index in cell sysfs file nameArnd Bergmann1-2/+3
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on Apple M1, which (in downstream dts files) has multiple nvmem cells that use the same byte address. This causes the device probe to fail with [ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10' [ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133 [ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT) [ 0.605362] Call trace: [ 0.605365] show_stack+0x18/0x2c [ 0.605374] dump_stack_lvl+0x60/0x80 [ 0.605383] dump_stack+0x18/0x24 [ 0.605388] sysfs_warn_dup+0x64/0x80 [ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4 [ 0.605402] internal_create_group+0x268/0x404 [ 0.605409] sysfs_create_groups+0x38/0x94 [ 0.605415] devm_device_add_groups+0x50/0x94 [ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0 [ 0.605682] nvmem_register+0x38c/0x470 [ 0.605789] devm_nvmem_register+0x1c/0x6c [ 0.605895] apple_efuses_probe+0xe4/0x120 [ 0.606000] platform_probe+0xa8/0xd0 As far as I can tell, this is a problem for any device with multiple cells on different bits of the same address. Avoid the issue by changing the file name to include the first bit number. Fixes: 0331c611949f ("nvmem: core: Expose cells through sysfs") Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156 Cc: <regressions@lists.linux.dev> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <asahi@lists.linux.dev> Cc: Sven Peter <sven@svenpeter.dev> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-18Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds12-225/+585
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2024-01-04nvmem: u-boot-env: improve coding styleRafał Miłecki1-4/+4
1. Prefer kzalloc() over kcalloc() See memory-allocation.rst which says: "to be on the safe side it's best to use routines that set memory to zero, like kzalloc()" 2. Drop dev_err() for u_boot_env_add_cells() fail It can fail only on -ENOMEM. We don't want to print error then. 3. Add extra "crc32_addr" variable It makes code reading header's crc32 easier to understand / review. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-5-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: u-boot-env: use nvmem device helpersRafał Miłecki1-8/+15
Use nvmem_dev_size() and nvmem_device_read() to make this driver less mtd dependent. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-4-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: u-boot-env: use nvmem_add_one_cell() nvmem subsystem helperRafał Miłecki1-34/+21
Simplify adding NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-3-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: core: add nvmem_dev_size() helperRafał Miłecki1-0/+13
This is required by layouts that need to read whole NVMEM content. It's especially useful for NVMEM devices without hardcoded layout (like U-Boot environment data block). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: drop nvmem_layout_get_match_data()Rafał Miłecki1-13/+0
Thanks for layouts refactoring we now have "struct device" associated with layout. Also its OF pointer points directly to the "nvmem-layout" DT node. All it takes to get match data is a generic of_device_get_match_data(). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231219120104.3422-2-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04nvmem: layouts: refactor .add_cells() callback argumentsRafał Miłecki3-3/+7
Simply pass whole "struct nvmem_layout" instead of single variables. There is nothing in "struct nvmem_layout" that we have to hide from layout drivers. They also access it during .probe() and .remove(). Thanks to this change: 1. API gets more consistent All layouts drivers callbacks get the same argument 2. Layouts get correct device Before this change NVMEM core code was passing NVMEM device instead of layout device. That resulted in: * Confusing prints * Calling devm_*() helpers on wrong device * Helpers like of_device_get_match_data() dereferencing NULLs 3. It gets possible to get match data First of all nvmem_layout_get_match_data() requires passing "struct nvmem_layout" which .add_cells() callback didn't have before this. It doesn't matter much as it's rather useless now anyway (and will be dropped). What's more important however is that of_device_get_match_data() can be used now thanks to owning a proper device pointer. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: stm32: add support for STM32MP25 BSEC to control OTP dataPatrick Delaunay1-0/+16
On STM32MP25, OTP area may be read/written by using BSEC (boot, security and OTP control). The BSEC internal peripheral is only managed by the secure world. The 12 Kbits of OTP (effective) are organized into the following regions: - lower OTP (OTP0 to OTP127) = 4096 lower OTP bits, bitwise (1-bit) programmable - mid OTP (OTP128 to OTP255) = 4096 middle OTP bits, bulk (32-bit) programmable - upper OTP (OTP256 to OTP383) = 4096 upper OTP bits, bulk (32-bit) programmable, only accessible when BSEC is in closed state. As HWKEY and ECIES key are only accessible by ROM code; only 368 OTP words are managed in this driver (OTP0 to OTP267). This patch adds the STM32MP25 configuration for reading and writing the OTP data using the OP-TEE BSEC TA services. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: core: Expose cells through sysfsMiquel Raynal2-1/+135
The binary content of nvmem devices is available to the user so in the easiest cases, finding the content of a cell is rather easy as it is just a matter of looking at a known and fixed offset. However, nvmem layouts have been recently introduced to cope with more advanced situations, where the offset and size of the cells is not known in advance or is dynamic. When using layouts, more advanced parsers are used by the kernel in order to give direct access to the content of each cell, regardless of its position/size in the underlying device. Unfortunately, these information are not accessible by users, unless by fully re-implementing the parser logic in userland. Let's expose the cells and their content through sysfs to avoid these situations. Of course the relevant NVMEM sysfs Kconfig option must be enabled for this support to be available. Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute group member will be filled at runtime only when relevant and will remain empty otherwise. In this case, as the cells attribute group will be empty, it will not lead to any additional folder/file creation. Exposed cells are read-only. There is, in practice, everything in the core to support a write path, but as I don't see any need for that, I prefer to keep the interface simple (and probably safer). The interface is documented as being in the "testing" state which means we can later add a write attribute if though relevant. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: core: Rework layouts to become regular devicesMiquel Raynal8-117/+334
Current layout support was initially written without modules support in mind. When the requirement for module support rose, the existing base was improved to adopt modularization support, but kind of a design flaw was introduced. With the existing implementation, when a storage device registers into NVMEM, the core tries to hook a layout (if any) and populates its cells immediately. This means, if the hardware description expects a layout to be hooked up, but no driver was provided for that, the storage medium will fail to probe and try later from scratch. Even if we consider that the hardware description shall be correct, we could still probe the storage device (especially if it contains the rootfs). One way to overcome this situation is to consider the layouts as devices, and leverage the native notifier mechanism. When a new NVMEM device is registered, we can populate its nvmem-layout child, if any, and wait for the matching to be done in order to get the cells (the waiting can be easily done with the NVMEM notifiers). If the layout driver is compiled as a module, it should automatically be loaded. This way, there is no strong order to enforce, any NVMEM device creation or NVMEM layout driver insertion will be observed as a new event which may lead to the creation of additional cells, without disturbing the probes with costly (and sometimes endless) deferrals. In order to achieve that goal we create a new bus for the nvmem-layouts with minimal logic to match nvmem-layout devices with nvmem-layout drivers. All this infrastructure code is created in the layouts.c file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: Move and rename ->fixup_cell_info()Miquel Raynal4-19/+11
This hook is meant to be used by any provider and instantiating a layout just for this is useless. Let's instead move this hook to the nvmem device and add it to the config structure to be easily shared by the providers. While at moving this hook, rename it ->fixup_dt_cell_info() to clarify its main intended purpose. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: Simplify the ->add_cells() hookMiquel Raynal3-5/+3
The layout entry is not used and will anyway be made useless by the new layout bus infrastructure coming next, so drop it. While at it, clarify the kdoc entry. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: Create a header for internal sharingMiquel Raynal2-23/+36
Before adding all the NVMEM layout bus infrastructure to the core, let's move the main nvmem_device structure in an internal header, only available to the core. This way all the additional code can be added in a dedicated file in order to keep the current core file tidy. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: Move of_nvmem_layout_get_container() in another headerMiquel Raynal1-8/+0
nvmem-consumer.h is included by consumer devices, extracting data from NVMEM devices whereas nvmem-provider.h is included by devices providing NVMEM content. The only users of of_nvmem_layout_get_container() outside of the core are layout drivers, so better move its prototype to nvmem-provider.h. While we do so, we also move the kdoc associated with the function to the header rather than the .c file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111536.316972-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15nvmem: brcm_nvram: store a copy of NVRAM contentRafał Miłecki1-40/+94
This driver uses MMIO access for reading NVRAM from a flash device. Underneath there is a flash controller that reads data and provides mapping window. Using MMIO interface affects controller configuration and may break real controller driver. It was reported by multiple users of devices with NVRAM stored on NAND. Modify driver to read & cache NVRAM content during init and use that copy to provide NVMEM data when requested. On NAND flashes due to their alignment NVRAM partitions can be quite big (1 MiB and more) while actual NVRAM content stays quite small (usually 16 to 32 KiB). To avoid allocating so much memory check for actual data length. Link: https://lore.kernel.org/linux-mtd/CACna6rwf3_9QVjYcM+847biTX=K0EoWXuXcSMkJO1Vy_5vmVqA@mail.gmail.com/ Fixes: 3fef9ed0627a ("nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM") Cc: <Stable@vger.kernel.org> Cc: Arınç ÜNAL <arinc.unal@arinc9.com> Cc: Florian Fainelli <florian.fainelli@broadcom.com> Cc: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231215111358.316727-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-07nvmem: Do not expect fixed layouts to grab a layout driverMiquel Raynal1-0/+6
Two series lived in parallel for some time, which led to this situation: - The nvmem-layout container is used for dynamic layouts - We now expect fixed layouts to also use the nvmem-layout container but this does not require any additional driver, the support is built-in the nvmem core. Ensure we don't refuse to probe for wrong reasons. Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*") Cc: stable@vger.kernel.org Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-04Merge tag 'char-misc-6.7-rc1' of ↵Linus Torvalds21-16/+36
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem changes for 6.7-rc1. Included in here are: - IIO subsystem driver updates and additions (largest part of this pull request) - FPGA subsystem driver updates - Counter subsystem driver updates - ICC subsystem driver updates - extcon subsystem driver updates - mei driver updates and additions - nvmem subsystem driver updates and additions - comedi subsystem dependency fixes - parport driver fixups - cdx subsystem driver and core updates - splice support for /dev/zero and /dev/full - other smaller driver cleanups All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits) cdx: add sysfs for subsystem, class and revision cdx: add sysfs for bus reset cdx: add support for bus enable and disable cdx: Register cdx bus as a device on cdx subsystem cdx: Create symbol namespaces for cdx subsystem cdx: Introduce lock to protect controller ops cdx: Remove cdx controller list from cdx bus system dts: ti: k3-am625-beagleplay: Add beaglecc1352 greybus: Add BeaglePlay Linux Driver dt-bindings: net: Add ti,cc1352p7 dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax Revert "nvmem: add new config option" MAINTAINERS: coresight: Add missing Coresight files misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition uacce: make uacce_class constant ocxl: make ocxl_class constant cxl: make cxl_class constant misc: phantom: make phantom_class constant ...
2023-10-27Revert "nvmem: add new config option"Rafał Miłecki1-1/+1
This reverts commit 517f14d9cf3533d5ab4fded195ab6f80a92e378f. Config option "no_of_node" is no longer needed since adding a more explicit and targeted option "add_legacy_fixed_of_cells". That "no_of_node" config option was needed *earlier* to help mtd's case. DT nodes of MTD partitions (that are also NVMEM devices) may contain subnodes. Those SHOULD NOT be treated as NVMEM fixed cells. To prevent NVMEM core code from parsing subnodes a "no_of_node" option was added (and set to true in mtd) to make for_each_child_of_node() in NVMEM a no-op. That was a bit hacky because it was messing with "of_node" pointer to achieve some side-effect. With the introduction of "add_legacy_fixed_of_cells" config option things got more explicit. MTD subsystem simply tells NVMEM when to look for fixed cells and there is no need to hack "of_node" pointer anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231023102759.31529-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21nvmem: Use device_get_match_data()Rob Herring2-9/+8
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231020105545.216052-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21nvmem: add explicit config option to read old syntax fixed OF cellsRafał Miłecki20-3/+24
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes has been deprecated. It has been replaced by the "fixed-layout" NVMEM layout binding. New syntax is meant to be clearer and should help avoiding imprecise bindings. NVMEM subsystem already supports the new binding. It should be a good idea to limit support for old syntax to existing drivers that actually support & use it (we can't break backward compatibility!). That way we additionally encourage new bindings & drivers to ignore deprecated binding. It wasn't clear (to me) if rtc and w1 code actually uses old syntax fixed cells. I enabled them to don't risk any breakage. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [for meson-{efuse,mx-efuse}.c] Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [for mtk-efuse.c, nvmem/core.c, nvmem-provider.h] Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [MT8192, MT8195 Chromebooks] Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [for microchip-otpc.c] Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> [SAMA7G5-EK] Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-21nvmem: qfprom: Mark core clk as optionalLuca Weiss1-3/+3
On some platforms like sc7280 on non-ChromeOS devices the core clock cannot be touched by Linux so we cannot provide it. Mark it as optional as accessing qfprom for reading works without it but we still prohibit writing if we cannot provide the clock. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231020105545.216052-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16nvmem: imx: correct nregs for i.MX6ULLPeng Fan1-1/+1
The nregs for i.MX6ULL should be 80 per fuse map, correct it. Fixes: ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16nvmem: imx: correct nregs for i.MX6ULPeng Fan1-1/+1
The nregs for i.MX6UL should be 144 per fuse map, correct it. Fixes: 4aa2b4802046 ("nvmem: octop: Add support for imx6ul") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16nvmem: imx: correct nregs for i.MX6SLLPeng Fan1-1/+1
The nregs for i.MX6SLL should be 80 per fuse map, correct it. Fixes: 6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: core: Notify when a new layout is registeredMiquel Raynal1-0/+4
Tell listeners a new layout was introduced and is now available. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-23-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: core: Do not open-code existing functionsMiquel Raynal1-2/+2
Use of_nvmem_layout_get_container() instead of hardcoding it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-22-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: core: Create all cells before adding the nvmem deviceMiquel Raynal1-5/+5
Let's pack all the cells creation in one place, so they are all created before we add the nvmem device. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-20-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helperAtul Raut1-1/+1
We are moving toward replacing zero-length arrays with C99 flexible-array members since they are deprecated. Therefore, the new DECLARE_FLEX_ARRAY() helper macro should be used to replace the zero-length array declaration. This fixes warnings such as: ./drivers/nvmem/u-boot-env.c:50:9-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Atul Raut <rauji.raut@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-19-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: sec-qfprom: Add Qualcomm secure QFPROM supportKomal Bajaj3-0/+111
For some of the Qualcomm SoC's, it is possible that some of the fuse regions or entire qfprom region is protected from non-secure access. In such situations, the OS will have to use secure calls to read the region. With that motivation, add secure qfprom driver. Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-18-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: Kconfig: Fix typo "drive" -> "driver"Diederik de Haas1-3/+3
Fix typo where "driver" was meant instead of "drive". While at it, also capitalize "OTP". Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-15-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: Explicitly include correct DT includesRob Herring16-16/+9
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: add new NXP QorIQ eFuse driverRichard Alpe3-0/+92
Add SFP (Security Fuse Processor) read support for NXP (Freescale) QorIQ series SOC's. This patch adds support for the T1023 SOC using the SFP offset from the existing T1023 device tree. In theory this should also work for T1024, T1014 and T1013 which uses the same SFP base offset. Signed-off-by: Richard Alpe <richard@bit42.se> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: qfprom: do some cleanupYangtao Li1-12/+5
Use devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() to simplify code. BTW convert to use dev_err_probe() instead of open it. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()Yangtao Li1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23nvmem: sunxi_sid: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230823132744.350618-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15nvmem: rmem: Use NVMEM_DEVID_AUTOPhil Elwell1-0/+1
It is reasonable to declare multiple nvmem blocks. Unless a unique 'id' is passed in for each block there may be name clashes. Avoid this by using the magic token NVMEM_DEVID_AUTO. Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Message-ID: <20230611140330.154222-6-srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15nvmem: core: add support for fixed cells *layout*Rafał Miłecki1-3/+29
This adds support for the "fixed-layout" NVMEM layout binding. It allows defining NVMEM cells in a layout DT node named "nvmem-layout". While NVMEM subsystem supports layout drivers it has been discussed that "fixed-layout" may actually be supperted internally. It's because: 1. It's a very basic layout 2. It allows sharing code with legacy syntax parsing 3. It's safer for soc_device_match() due to -EPROBE_DEFER 4. This will make the syntax transition easier Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Message-ID: <20230611140330.154222-26-srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 14:55:55 +0300