summaryrefslogtreecommitdiff
path: root/drivers/nvme
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29nvme-rdma: Use rq_dma_dir macroIsrael Rukshin1-7/+3
Remove code duplication. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-fc: Use rq_dma_dir macroIsrael Rukshin1-5/+2
Remove code duplication. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: Tidy up nvme_unmap_dataIsrael Rukshin1-3/+2
Remove pointless local variable and use rq_dma_dir macro. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: make fabrics command run on a separate request queueSagi Grimberg6-14/+64
We have a fundamental issue that fabric commands use the admin_q. The reason is, that admin-connect, register reads and writes and admin commands cannot be guaranteed ordering while we are running controller resets. For example, when we reset a controller we perform: 1. disable the controller 2. teardown the admin queue 3. re-establish the admin queue 4. enable the controller In order to perform (3), we need to unquiesce the admin queue, however we may have some admin commands that are already pending on the quiesced admin_q and will immediate execute when we unquiesce it before we execute (4). The host must not send admin commands to the controller before enabling the controller. To fix this, we have the fabric commands (admin connect and property get/set, but not I/O queue connect) use a separate fabrics_q and make sure to quiesce the admin_q before we disable the controller, and unquiesce it only after we enable the controller. This fixes the error prints from nvmet in a controller reset storm test: kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0 Which indicate that the host is sending an admin command when the controller is not enabled. Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: Support shared tags across queues for Apple 2018 controllersBenjamin Herrenschmidt2-1/+35
Another issue with the Apple T2 based 2018 controllers seem to be that they blow up (and shut the machine down) if there's a tag collision between the IO queue and the Admin queue. My suspicion is that they use our tags for their internal tracking and don't mix them with the queue id. They also seem to not like when tags go beyond the IO queue depth, ie 128 tags. This adds a quirk that marks tags 0..31 of the IO queue reserved Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: Add support for Apple 2018+ modelsBenjamin Herrenschmidt2-1/+30
Based on reverse engineering and original patch by Paul Pawlowski <paul@mrarm.io> This adds support for Apple weird implementation of NVME in their 2018 or later machines. It accounts for the twice-as-big SQ entries for the IO queues, and the fact that only interrupt vector 0 appears to function properly. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: Add support for variable IO SQ element sizeBenjamin Herrenschmidt1-3/+8
The size of a submission queue element should always be 6 (64 bytes) by spec. However some controllers such as Apple's are not properly implementing the standard and require a different size. This provides the ground work for the subsequent quirks for these controllers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: Pass the queue to SQ_SIZE/CQ_SIZE macrosBenjamin Herrenschmidt1-15/+15
This will make it easier to handle variable queue entry sizes later. No functional change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: trace bio completionHannes Reinecke2-3/+21
When native multipathing is enabled we cannot enable blktrace for the underlying paths, so any completion is never traced. Signed-off-by: Hannes Reinecke <hare@suse.com> [fixed-up by Mikhail for non-multipath-build] Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-multipath: fix ana log nsid lookup when nsid is not foundAnton Eidelman1-3/+5
ANA log parsing invokes nvme_update_ana_state() per ANA group desc. This updates the state of namespaces with nsids in desc->nsids[]. Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid. Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces: - if current namespace matches the current desc->nsids[n], this namespace is updated, and n is incremented. - the process stops when it encounters the end of either ctrl->namespaces end or desc->nsids[] In case desc->nsids[n] does not match any of ctrl->namespaces, the remaining nsids following desc->nsids[n] will not be updated. Such situation was considered abnormal and generated WARN_ON_ONCE. However ANA log MAY contain nsids not (yet) found in ctrl->namespaces. For example, lets consider the following scenario: - nvme0 exposes namespaces with nsids = [2, 3] to the host - a new namespace nsid = 1 is added dynamically - also, a ANA topology change is triggered - NS_CHANGED aen is generated and triggers scan_work - before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA aen was issues and ana_work receives ANA log with nsids=[1, 2, 3] Result: ana_work fails to update ANA state on existing namespaces [2, 3] Solution: Change the way nvme_update_ana_state() namespace list walk checks the current namespace against desc->nsids[n] as follows: a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces. b) ns->head->ns_id == desc->nsids[n]: match, update the namespace c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1] This enables correct operation in the scenario described above. This also allows ANA log to contain nsids currently invisible to the host, i.e. inactive nsids. Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet-tcp: Add TOS for tcp transportIsrael Rukshin1-0/+11
Set the outgoing packets type of service (TOS) according to the receiving TOS. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: Add TOS for tcp transportIsrael Rukshin1-1/+14
TOS provide clients the ability to segregate traffic flows for different type of data. One of the TOS usage is bandwidth management which allows setting bandwidth limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A and 20% to controllers at QoS class B. usage examples: nvme connect --tos=0 --transport=tcp --traddr=10.0.1.1 --nqn=test-nvme Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: Use struct nvme_ctrl directlyIsrael Rukshin1-10/+10
This patch doesn't change any functionality. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-rdma: Add TOS for rdma transportIsrael Rukshin1-3/+6
For RDMA transports, TOS is an extension of IB QoS to provide clients the ability to segregate traffic flows for different type of data. RDMA CM abstract it for ULPs using rdma_set_service_type(). Internally, each traffic flow is represented by a connection with all of its independent resources like that of a normal connection, and is differentiated by service type. In other words, there can be multiple qp connections between an IP pair and each supports a unique service type. One of the TOS usage is bandwidth management which allows setting bandwidth limits for QoS classes, e.g. 80% bandwidth to controllers at QoS class A and 20% to controllers at QoS class B. Note: In addition to the TOS configuration, QOS must be configured on the relevant HCA on the target (send RDMA commands) and initiator to effect the traffic. usage examples: nvme connect --tos=0 --transport=rdma --traddr=10.0.1.1 --nqn=test-nvme Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-fabrics: Add type of service (TOS) configurationIsrael Rukshin2-0/+21
TOS is user-defined and needs to be configured via nvme-cli. It must be set before initiating any traffic and once set the TOS cannot be changed. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet-tcp: fix possible memory leakSagi Grimberg1-0/+1
when we uninit a command in error flow we also need to free an iovec if it was allocated. Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet-tcp: fix possible NULL derefSagi Grimberg1-4/+8
We must only call sgl_free for sgl that we actually allocated. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet: trace: parse Get LBA Status command in detailMinwoo Im1-0/+18
Four different fields are in CDWs of Get LBA Status command which means it would be great if we can see in detail when tracing in target side also. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: trace: parse Get LBA Status command in detailMinwoo Im1-0/+18
Four different fields are in CDWs of Get LBA Status command which means it would be great if we can see in detail when tracing. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvmet: fix data units read and written counters in SMART logTom Wu1-6/+8
In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2): This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up. However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires. Signed-off-by: Tom Wu <tomwu@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: support simple pollingSagi Grimberg1-6/+45
Simple polling support via socket busy_poll interface. Although we do not shutdown interrupts but simply hammer the socket poll, we can sometimes find completions faster than the normal interrupt driven RX path. We add per queue nr_cqe counter that resets every time RX path is invoked such that .poll callback can return it to stay consistent with the semantics. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: tcp: selects CRYPTO_CRC32C for nvme-tcpMinwoo Im1-0/+1
The tcp host module is now taking those APIs from crypto ahash: (1) crypto_ahash_final() (2) crypto_ahash_digest() (3) crypto_alloc_ahash() nvme-tcp should depends on CRYPTO_CRC32C. Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: don't pass cap to nvme_disable_ctrlSagi Grimberg5-7/+7
All seem to call it with ctrl->cap so no need to pass it at all. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: move sqsize setting to the coreSagi Grimberg7-55/+17
nvme_enable_ctrl reads the cap register right after, so no need to do that locally in the transport driver. Have sqsize setting in nvme_init_identify. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-pci: set ctrl sqsize to the device q_depthSagi Grimberg1-0/+1
Align with what the rest of the transports are doing. Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme: have nvme_init_identify set ctrl->capSagi Grimberg1-4/+3
No need to use a stack cap variable. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: Use protocol specific operations while reading socketPotnuri Bharat Teja1-2/+3
Using socket specific read_sock() calls instead of directly calling tcp_read_sock() helps lld module registered handlers if any, to be called from nvme-tcp host. This patch therefore replaces the tcp_read_sock() with socket specific prot_ops. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-29nvme-tcp: cleanup nvme_tcp_recv_pduSagi Grimberg1-8/+3
Can return directly in the switch statement Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-08-06lightnvm: move metadata mapping to lower level driverHans Holmberg1-3/+17
Now that blk_rq_map_kern can map both kmem and vmem, move internal metadata mapping down to the lower level driver. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hans Holmberg <hans@owltronix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-06lightnvm: remove nvm_submit_io_sync_fnHans Holmberg1-29/+0
Move the redundant sync handling interface and wait for a completion in the lightnvm core instead. Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hans Holmberg <hans@owltronix.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-05blk-mq: remove blk_mq_complete_request_syncMing Lei1-1/+1
blk_mq_tagset_wait_completed_request() has been applied for waiting for completed request's fn, so not necessary to use blk_mq_complete_request_sync() any more. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-05nvme: wait until all completed request's complete fn is calledMing Lei5-4/+18
When aborting in-flight request for recovering controller, we have to make sure that queue's complete function is called on completed request before moving on. Otherwise, for example, the warning of WARN_ON_ONCE(qp->mrs_used > 0) in ib_destroy_qp_user() may be triggered on nvme-rdma. Fix this issue by using blk_mq_tagset_wait_completed_request. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-05nvme: don't abort completed request in nvme_cancel_requestMing Lei1-0/+4
Before aborting in-flight requests, all IO queues and their interrupts have been shutdown. However, request's completion function may not be done yet because it can be scheduled to run via IPI. So don't abort one request if it is marked as completed, otherwise we may abort one normal completed request. Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-23Revert "nvme-pci: don't create a read hctx mapping without read queues"yangerkun1-3/+1
This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix multipath crash when ANA is deactivatedMarta Rybczynska2-7/+7
Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix memory leak caused by incorrect subsystem freeLogan Gunthorpe1-7/+5
When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: ignore subnqn for ADATA SX6000LNPMisha Nasledov1-0/+2
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-16Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-blockLinus Torvalds13-48/+228
Pull more block updates from Jens Axboe: "A later pull request with some followup items. I had some vacation coming up to the merge window, so certain things items were delayed a bit. This pull request also contains fixes that came in within the last few days of the merge window, which I didn't want to push right before sending you a pull request. This contains: - NVMe pull request, mostly fixes, but also a few minor items on the feature side that were timing constrained (Christoph et al) - Report zones fixes (Damien) - Removal of dead code (Damien) - Turn on cgroup psi memstall (Josef) - block cgroup MAINTAINERS entry (Konstantin) - Flush init fix (Josef) - blk-throttle low iops timing fix (Konstantin) - nbd resize fixes (Mike) - nbd 0 blocksize crash fix (Xiubo) - block integrity error leak fix (Wenwen) - blk-cgroup writeback and priority inheritance fixes (Tejun)" * tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits) MAINTAINERS: add entry for block io cgroup null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED block: Limit zone array allocation size sd_zbc: Fix report zones buffer allocation block: Kill gfp_t argument of blkdev_report_zones() block: Allow mapping of vmalloc-ed buffers block/bio-integrity: fix a memory leak bug nvme: fix NULL deref for fabrics options nbd: add netlink reconfigure resize support nbd: fix crash when the blksize is zero block: Disable write plugging for zoned block devices block: Fix elevator name declaration block: Remove unused definitions nvme: fix regression upon hot device removal and insertion blk-throttle: fix zero wait time for iops throttled group block: Fix potential overflow in blk_report_zones() blkcg: implement REQ_CGROUP_PUNT blkcg, writeback: Implement wbc_blkcg_css() blkcg, writeback: Add wbc->no_cgroup_owner blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner() ...
2019-07-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-12Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-8/+10
Pull SCSI scatter-gather list updates from James Bottomley: "This topic branch covers a fundamental change in how our sg lists are allocated to make mq more efficient by reducing the size of the preallocated sg list. This necessitates a large number of driver changes because the previous guarantee that if a driver specified SG_ALL as the size of its scatter list, it would get a non-chained list and didn't need to bother with scatterlist iterators is now broken and every driver *must* use scatterlist iterators. This was broken out as a separate topic because we need to convert all the drivers before pulling the trigger and unconverted drivers kept being found, necessitating a rebase" * tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation scsi: core: avoid preallocating big SGL for data scsi: core: avoid preallocating big SGL for protection information scsi: lib/sg_pool.c: improve APIs for allocating sg pool scsi: esp: use sg helper to iterate over scatterlist scsi: NCR5380: use sg helper to iterate over scatterlist scsi: wd33c93: use sg helper to iterate over scatterlist scsi: ppa: use sg helper to iterate over scatterlist scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist scsi: imm: use sg helper to iterate over scatterlist scsi: aha152x: use sg helper to iterate over scatterlist scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist scsi: usb: image: microtek: use sg helper to iterate over scatterlist scsi: pmcraid: use sg helper to iterate over scatterlist scsi: ipr: use sg helper to iterate over scatterlist scsi: mvumi: use sg helper to iterate over scatterlist scsi: lpfc: use sg helper to iterate over scatterlist scsi: advansys: use sg helper to iterate over scatterlist ...
2019-07-12nvme: fix NULL deref for fabrics optionsMinwoo Im1-1/+1
git://git.infradead.org/nvme.git nvme-5.3 branch now causes the following NULL deref oops. Check the ctrl->opts first before the deref. [ 16.337581] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 16.338551] #PF: supervisor read access in kernel mode [ 16.338551] #PF: error_code(0x0000) - not-present page [ 16.338551] PGD 0 P4D 0 [ 16.338551] Oops: 0000 [#1] SMP PTI [ 16.338551] CPU: 2 PID: 1035 Comm: kworker/u16:5 Not tainted 5.2.0-rc6+ #1 [ 16.338551] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 16.338551] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core] [ 16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf [ 16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283 [ 16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007 [ 16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720 [ 16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840 [ 16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8 [ 16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001 [ 16.338551] FS: 0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000 [ 16.338551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0 [ 16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.338551] Call Trace: [ 16.338551] nvme_scan_work+0x2c0/0x340 [nvme_core] [ 16.338551] ? __switch_to_asm+0x40/0x70 [ 16.338551] ? _raw_spin_unlock_irqrestore+0x18/0x30 [ 16.338551] ? try_to_wake_up+0x408/0x450 [ 16.338551] process_one_work+0x20b/0x3e0 [ 16.338551] worker_thread+0x1f9/0x3d0 [ 16.338551] ? cancel_delayed_work+0xa0/0xa0 [ 16.338551] kthread+0x117/0x120 [ 16.338551] ? kthread_stop+0xf0/0xf0 [ 16.338551] ret_from_fork+0x3a/0x50 [ 16.338551] Modules linked in: nvme nvme_core [ 16.338551] CR2: 0000000000000056 [ 16.338551] ---[ end trace b9bf761a93e62d84 ]--- [ 16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core] [ 16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf [ 16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283 [ 16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007 [ 16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720 [ 16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840 [ 16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8 [ 16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001 [ 16.338551] FS: 0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000 [ 16.338551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0 [ 16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 958f2a0f8121 ("nvme-tcp: set the STABLE_WRITES flag when data digests are enabled") Cc: Christoph Hellwig <hch@lst.de> Cc: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10nvme: fix regression upon hot device removal and insertionSagi Grimberg1-2/+2
When we validate the new controller id, we want to skip controllers that are either deleting or dead. Fix the check to do that and not on the newly added controller. Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation") Reported-by: Jon Derrick <jonathan.derrick@intel.com> Tested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-fc: fix module unloads while lports still pendingJames Smart1-3/+48
Current code allows the module to be unloaded even if there are pending data structures, such as localports and controllers on the localports, that have yet to hit their reference counting to remove them. Fix by having exit entrypoint explicitly delete every controller, which in turn will remove references on the remoteports and localports causing them to be deleted as well. The exit entrypoint, after initiating the deletes, will wait for the last localport to be deleted before continuing. Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-tcp: don't use sendpage for SLAB pagesMikhail Skorzhinskii1-1/+8
According to commit a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects") and previous discussion, tcp_sendpage should not be used for pages that is managed by SLAB, as SLAB is not taking page reference counters into consideration. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-tcp: set the STABLE_WRITES flag when data digests are enabledMikhail Skorzhinskii1-0/+5
There was a few false alarms sighted on target side about wrong data digest while performing high throughput load to XFS filesystem shared through NVMoF TCP. This flag tells the rest of the kernel to ensure that the data buffer does not change while the write is in flight. It incurs a performance penalty, so only enable it when it is actually needed, i.e. when we are calculating data digests. Although even with this change in place, ext2 users can steel experience false positives, as ext2 is not respecting this flag. This may be apply to vfat as well. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Signed-off-by: Mike Playle <mplayle@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvmet: print a hint while rejecting NSID 0 or 0xffffffffMikhail Skorzhinskii1-1/+3
Adding this hint for the sake of convenience. It was spotted that a few times people spent some time before understanding what is exactly wrong in configuration process. This should save a few time in such situations, especially for people who is not very confident with NVMe requirements. Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-multipath: do not select namespaces which are about to be removedHannes Reinecke1-1/+2
nvme_ns_remove() will first set the NVME_NS_REMOVING flag before removing it from the list at the very last step. So to avoid selecting a namespace in nvme_find_path() which is about to be removed check the NVME_NS_REMOVING flag, too, when selecting a new path. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-multipath: also check for a disabled path if there is a single siblingHannes Reinecke1-1/+4
When we have a singular list in nvme_round_robin_path() we still need to check its validity. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme-multipath: factor out a nvme_path_is_disabled helperHannes Reinecke1-4/+8
Factor our a common helper to check if a path has been disabled by something other than the per-namespace ANA state. Signed-off-by: Hannes Reinecke <hare@suse.com> [hch: split from a bigger patch] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10nvme: set physical block size and optimal I/O sizeBart Van Assche2-2/+33
>From the NVMe 1.4 spec: NSFEAT bit 4 if set to 1: indicates that the fields NPWG, NPWA, NPDG, NPDA, and NOWS are defined for this namespace and should be used by the host for I/O optimization; [ ... ] Namespace Preferred Write Granularity (NPWG): This field indicates the smallest recommended write granularity in logical blocks for this namespace. This is a 0's based value. The size indicated should be less than or equal to Maximum Data Transfer Size (MDTS) that is specified in units of minimum memory page size. The value of this field may change if the namespace is reformatted. The size should be a multiple of Namespace Preferred Write Alignment (NPWA). Refer to section 8.25 for how this field is utilized to improve performance and endurance. [ ... ] Each Write, Write Uncorrectable, or Write Zeroes commands should address a multiple of Namespace Preferred Write Granularity (NPWG) (refer to Figure 245) and Stream Write Size (SWS) (refer to Figure 515) logical blocks (as expressed in the NLB field), and the SLBA field of the command should be aligned to Namespace Preferred Write Alignment (NPWA) (refer to Figure 245) for best performance. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-28 07:25:25 +0300