summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2025-07-22wifi: iwlwifi: fix cmd length when sending WOWLAN_TSC_RSC_PARAMAntonio Quartulli1-1/+1
In iwl_mvm_wowlan_config_rsc_tsc() when calling iwl_mvm_send_cmd_pdu() we are accidentally passing the size of a pointer rather than the size of the object pointed by it. Fix the expression in order to pass the approriate object length. Fixes: 493681d9f95b ("wifi: iwlwifi: remove support of version 4 of iwl_wowlan_rsc_tsc_params_cmd") Address-Coverity-ID: 1647627 ("Incorrect expression (SIZEOF_MISMATCH)") Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> Link: https://patch.msgid.link/20250716201911.700-1-antonio@mandelbit.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-07-22net: phy: qcom: qca807x: Enable WoL support using shared libraryLuo Jie1-0/+4
The Wake-on-LAN (WoL) functionality for the QCA807x series is identical to that of the AT8031. WoL support for QCA807x is enabled by utilizing the at8031_set_wol() function provided in the shared library. Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://patch.msgid.link/20250718-qca807x_wol_support-v1-1-cfe323cbb4e8@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: usb: smsc95xx: add support for ethtool pause parametersOleksij Rempel1-3/+69
Implement ethtool .get_pauseparam and .set_pauseparam handlers for configuring flow control on smsc95xx. The driver now supports enabling or disabling transmit and receive pause frames, with or without autonegotiation. Pause settings are applied during link-up based on current PHY state and user configuration. Previously, the driver used phy_get_pause() during link-up handling, but lacked initialization and an ethtool interface to configure pause modes. As a result, flow control support was effectively non-functional. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250718075157.297923-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22Merge branch '200GbE' of ↵Jakub Kicinski31-195/+1122
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-07-18 (idpf, ice, igc, igbvf, ixgbevf) For idpf: Ahmed and Sudheer add support for flow steering via ntuple filters. Current support is for IPv4 and TCP/UDP only. Milena adds support for cross timestamping. Ahmed preserves coalesce settings across resets. For ice: Alex adds reporting of 40GbE speed in devlink port split. Dawid adds support for E835 devices. Jesse refactors profile ptype processing for cleaner, more readable, code. Dave adds a couple of helper functions for LAG to reduce code duplication. For igc: Siang adds support to configure "Default Queue" during runtime using ethtool's Network Flow Classification (NFC) wildcard rule approach. For igbvf: Yuto Ohnuki removes unused fields from igbvf_adapter. For ixgbevf: Yuto Ohnuki removes unused fields from ixgbevf_adapter. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbevf: remove unused fields from struct ixgbevf_adapter igbvf: remove unused fields from struct igbvf_adapter igc: Add wildcard rule support to ethtool NFC using Default Queue igc: Relocate RSS field definitions to igc_defines.h ice: breakout common LAG code into helpers ice: convert ice_add_prof() to bitmap ice: add E835 device IDs ice: add 40G speed to Admin Command GET PORT OPTION idpf: preserve coalescing settings across resets idpf: add cross timestamping idpf: add flow steering support virtchnl2: add flow steering support virtchnl2: rename enum virtchnl2_cap_rss ==================== Link: https://patch.msgid.link/20250718185118.2042772-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22gve: Fix stuck TX queue for DQ queue formatPraveen Kaligineedi1-30/+37
gve_tx_timeout was calculating missed completions in a way that is only relevant in the GQ queue format. Additionally, it was attempting to disable device interrupts, which is not needed in either GQ or DQ queue formats. As a result, TX timeouts with the DQ queue format likely would have triggered early resets without kicking the queue at all. This patch drops the check for pending work altogether and always kicks the queue after validating the queue has not seen a TX timeout too recently. Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: usb: cdc-ncm: check for filtering capabilityOliver Neukum1-4/+16
If the decice does not support filtering, filtering must not be used and all packets delivered for the upper layers to sort. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250717120649.2090929-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: stmmac: dwmac-renesas-gbeth: Add PM suspend/resume callbacksBiju Das1-0/+1
Add PM suspend/resume callbacks for RZ/G3E SMARC EVK. The PM deep entry is executed by pressing the SLEEP button and exit from entry is by pressing the power button. Logs: root@smarc-rzg3e:~# PM: suspend entry (deep) Filesystems sync: 0.115 seconds Freezing user space processes Freezing user space processes completed (elapsed 0.002 seconds) OOM killer disabled. Freezing remaining freezable tasks Freezing remaining freezable tasks completed (elapsed 0.001 seconds) printk: Suspending console(s) (use no_console_suspend to debug) NOTICE: BL2: v2.10.5(release):2.10.5/rz_soc_dev-162-g7148ba838 NOTICE: BL2: Built : 14:23:58, Jul 5 2025 NOTICE: BL2: SYS_LSI_MODE: 0x13e06 NOTICE: BL2: SYS_LSI_DEVID: 0x8679447 NOTICE: BL2: SYS_LSI_PRR: 0x0 NOTICE: BL2: Booting BL31 renesas-gbeth 15c30000.ethernet end0: Link is Down Disabling non-boot CPUs ... psci: CPU3 killed (polled 0 ms) psci: CPU2 killed (polled 0 ms) psci: CPU1 killed (polled 0 ms) Enabling non-boot CPUs ... Detected VIPT I-cache on CPU1 GICv3: CPU1: found redistributor 100 region 0:0x0000000014960000 CPU1: Booted secondary processor 0x0000000100 [0x412fd050] CPU1 is up Detected VIPT I-cache on CPU2 GICv3: CPU2: found redistributor 200 region 0:0x0000000014980000 CPU2: Booted secondary processor 0x0000000200 [0x412fd050] CPU2 is up Detected VIPT I-cache on CPU3 GICv3: CPU3: found redistributor 300 region 0:0x00000000149a0000 CPU3: Booted secondary processor 0x0000000300 [0x412fd050] CPU3 is up dwmac4: Master AXI performs fixed burst length 15c30000.ethernet end0: No Safety Features support found 15c30000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported 15c30000.ethernet end0: configuring for phy/rgmii-id link mode dwmac4: Master AXI performs fixed burst length 15c40000.ethernet end1: No Safety Features support found 15c40000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported 15c40000.ethernet end1: configuring for phy/rgmii-id link mode OOM killer enabled. Restarting tasks: Starting Restarting tasks: Done random: crng reseeded on system resumption PM: suspend exit 15c30000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx root@smarc-rzg3e:~# ifconfig end0 192.168.10.7 up root@smarc-rzg3e:~# ping 192.168.10.1 PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data. 64 bytes from 192.168.10.1: icmp_seq=1 ttl=64 time=2.05 ms 64 bytes from 192.168.10.1: icmp_seq=2 ttl=64 time=0.928 ms Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20250717071109.8213-1-biju.das.jz@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22net: bcmasp: Restore programming of TX map vector registerFlorian Fainelli1-0/+3
On ASP versions v2.x we need to program the TX map vector register to properly exercise end-to-end flow control, otherwise the TX engine can either lock-up, or cause the hardware calculated checksum to be wrong/corrupted when multiple back to back packets are being submitted for transmission. This register defaults to 0, which means no flow control being applied. Fixes: e9f31435ee7d ("net: bcmasp: Add support for asp-v3.0") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250718212242.3447751-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22amd-xgbe: add hardware PTP timestamping supportRaju Rangoju6-86/+179
Adds complete support for hardware-based PTP (IEEE 1588) timestamping to the AMD XGBE driver. - Initialize and configure the MAC PTP registers based on link speed and reference clock. - Support both 50MHz and 125MHz PTP reference clocks. - Update the driver interface and version data to support PTP clock frequency selection. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-3-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22and-xgbe: remove the abstraction for hwptpRaju Rangoju6-331/+345
Remove the hwptp abstraction and associated callbacks from the struct xgbe_hw_if {}. The callback structure was only ever assigned a single function, without null checks. This cleanup inlines the logic and moves all the hwtstamp realted code a separate file, improving readability and maintainance. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250718185628.4038779-2-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-22wifi: ath12k: Correct tid cleanup when tid setup failsSarika Sharma1-2/+1
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-22wifi: ath12k: bring DFS support back for WCN7850Baochen Qiang1-17/+30
Due to the restrict in MAC80211 that DFS (Dynamic Frequency Selection) can't be enabled on multiple channels, commit 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device") removes DFS support in order to support 2 channels concurrently, making AP mode not working on DFS channels [1]. Revert portions of that commit to bring DFS back, and add a new combination to support 2-channels concurrency. This is valid because the MAC80211 restrict works on each individual combination, but does not care about them as a whole, as far as DFS is concerned. This change applies to WCN7850 only, other chips are not affected. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device") Reported-by: Mihai Moldovan <ionic@ionic.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220346 # 1 Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Mihai Moldovan <ionic@ionic.de> Link: https://patch.msgid.link/20250721-ath12k-dfs-v1-1-065c31454f91@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-22wifi: ath12k: Prefer {} to {0} in initializersJeff Johnson11-47/+48
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-22wifi: ath11k: Prefer {} to {0} in initializersJeff Johnson14-70/+75
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-22wifi: ath10k: Prefer {} to {0} in initializersJeff Johnson7-18/+20
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: brcmfmac: support CYW54591 PCIE deviceDouble Lo2-5/+17
CYW54591 is a variant of BCM4355 silicon with the same chipid. In the chipid-fwname mapping table, apply chiprev 13 to identify CYW54591. Skip reading OTP process for CYW chip since it contains vendor specific information which is not common for cypress. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250624093453.7264-1-ian.lin@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-21wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IEGokul Sivakumar1-4/+4
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie() got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan(). Because of this, as part of the scan request handler for the P2P Discovery, vif struct used for adding the Probe Request P2P IE in firmware got changed from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly. So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe requests frames and the other P2P peers were unable to discover this device causing a regression on the P2P feature. To fix this, while setting the P2P IE in firmware, properly use the vif of the P2P discovery wdev on which the driver received the P2P scan request. This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie() is completed. Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-21e1000e: ignore uninitialized checksum word on tgpJacek Kowalski2-0/+9
As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Unfortunately some systems have left the factory with an uninitialized value of 0xFFFF at register address 0x3F (checksum word location). So on Tiger Lake platform we ignore the computed checksum when such condition is encountered. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Tested-by: Vlad URSU <vlad@ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-21e1000e: disregard NVM checksum on tgp when valid checksum bit is not setJacek Kowalski1-0/+2
As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Since Tiger Lake devices were the first to have > this lock, some systems in the field did not meet this requirement. > Therefore, for these transitional devices we skip checksum update and > verification, if the valid bit is not set. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-21ice: Fix a null pointer dereference in ice_copy_and_init_pkg()Haoxiang Li1-0/+2
Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference. Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-21i40e: When removing VF MAC filters, only check PF-set MACJamie Bainbridge1-2/+2
When the PF is processing an Admin Queue message to delete a VF's MACs from the MAC filter, we currently check if the PF set the MAC and if the VF is trusted. This results in undesirable behaviour, where if a trusted VF with a PF-set MAC sets itself down (which sends an AQ message to delete the VF's MAC filters) then the VF MAC is erased from the interface. This results in the VF losing its PF-set MAC which should not happen. There is no need to check for trust at all, because an untrusted VF cannot change its own MAC. The only check needed is whether the PF set the MAC. If the PF set the MAC, then don't erase the MAC on link-down. Resolve this by changing the deletion check only for PF-set MAC. (the out-of-tree driver has also intentionally removed the check for VF trust here with OOT driver version 2.26.8, this changes the Linux kernel driver behaviour and comment to match the OOT driver behaviour) Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-21i40e: report VF tx_dropped with tx_errors instead of tx_discardsDennis Chen1-1/+1
Currently the tx_dropped field in VF stats is not updated correctly when reading stats from the PF. This is because it reads from i40e_eth_stats.tx_discards which seems to be unused for per VSI stats, as it is not updated by i40e_update_eth_stats() and the corresponding register, GLV_TDPC, is not implemented[1]. Use i40e_eth_stats.tx_errors instead, which is actually updated by i40e_update_eth_stats() by reading from GLV_TEPC. To test, create a VF and try to send bad packets through it: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ cat test.py from scapy.all import * vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP() ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP() print("Send packet with bad VLAN tag") sendp(vlan_pkt, iface="enp2s0f0v0") print("Send packet with TTL=0") sendp(ttl_pkt, iface="enp2s0f0v0") $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 $ python test.py Send packet with bad VLAN tag . Sent 1 packets. Send packet with TTL=0 . Sent 1 packets. $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 A packet with non-existent VLAN tag and a packet with TTL = 0 are sent, but tx_dropped is not incremented. After patch: $ ip -s link show dev enp2s0f0 19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 2 Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO") Signed-off-by: Dennis Chen <dechen@redhat.com> Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-21net: usb: Remove duplicate assignments for net->pcpu_stat_typeZqiang1-1/+0
This commit remove duplicate assignments for net->pcpu_stat_type in usbnet_probe(). Signed-off-by: Zqiang <qiang.zhang@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-20Merge tag 'hyperv-fixes-signed-20250718' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley) - An assorted set of fixes to remove warnings for missing export.h header inclusion (Naman Jain) - An assorted set of fixes for when Linux run as the root partition for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav Kinsburskii) - Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain) - Fix fcopy tool to handle irregularities with size of ring buffer (Naman Jain) - Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga) * tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: tools/hv: fcopy: Fix irregularities with size of ring buffer PCI: hv: Use the correct hypercall for unmasking interrupts on nested x86/hyperv: Expose hv_map_msi_interrupt() Drivers: hv: Use nested hypercall for post message and signal event x86/hyperv: Clean up hv_map/unmap_interrupt() return values x86/hyperv: Fix usage of cpu_online_mask to get valid cpu PCI: hv: Don't load the driver for baremetal root partition net: mana: Fix warnings for missing export.h header inclusion PCI: hv: Fix warnings for missing export.h header inclusion clocksource: hyper-v: Fix warnings for missing export.h header inclusion x86/hyperv: Fix warnings for missing export.h header inclusion Drivers: hv: Fix warnings for missing export.h header inclusion Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR tools/hv: fcopy: Fix incorrect file path conversion Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
2025-07-20net/mlx5: Add IFC bits to support RSS for IPSec offloadJianbo Liu1-5/+8
This adds the capabilities, ipsec_next_header and inner/outer l4_type_ext fields to support RSS for the decrypted packets. These fields are specifically for firmware steering. HWS validation logic is updated to correctly handle the changes, ensuring the unsupported fields are not set. Besides, reserved_at_c4 is fixed to reserved_at_d4 to reflect the accurate offset within the structure. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1752734895-257735-2-git-send-email-tariqt@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-19wifi: ath12k: Advertise encapsulation/decapsulation offload support to mac80211Nithyanantham Paramasivam2-0/+6
Currently, the mac80211 layer handles construction and parsing of 802.11 headers during packet transmission and reception. Offloading encapsulation and decapsulation to hardware can significantly enhance performance. Check the service bit to determine if the firmware supports Ethernet offload. If supported, advertise the capability to mac80211 to bypass software-based 802.11 header processing. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-4-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-19wifi: ath12k: Fix TX status reporting to mac80211 when offload is enabledNithyanantham Paramasivam1-4/+60
Currently, the ath12k driver supports only the native Wi-Fi frame format. In this mode, the ieee80211_tx_status() function works correctly to report transmission status to mac80211, as it retrieves station information using sta_info_get_by_addrs(). However, this method is not applicable for Ethernet-converted packets, since sta_info_get_by_addrs() cannot extract station information from such formats. Retrieve station information using ath12k_peer_find_by_id() to support all frame formats, including native Wi-Fi, raw, and Ethernet. Report transmission status using ieee80211_tx_status_ext(), and include rate information as part of the datapath TX status report. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-3-nithyanantham.paramasivam@oss.qualcomm.com [changed instances of { 0 } to {}] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-19wifi: ath12k: Fix the handling of TX packets in Ethernet modeNithyanantham Paramasivam2-7/+32
Currently, in the transmit (TX) direction, EAPOL, QoS NULL, and multicast frames are sent in native Wi-Fi (802.11) format. However, when the virtual interface is configured in Ethernet mode, transmission fails for packets enqueued in native Wi-fi format. To address this issue, the firmware should be instructed to treat these packets as RAW type packets, ensuring proper handling even when the interface operates in Ethernet mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-2-nithyanantham.paramasivam@oss.qualcomm.com [fix indentation] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-19net/mlx5: E-Switch, Fix peer miss rules to use peer eswitchShahar Shitrit1-54/+54
In the original design, it is assumed local and peer eswitches have the same number of vfs. However, in new firmware, local and peer eswitches can have different number of vfs configured by mlxconfig. In such configuration, it is incorrect to derive the number of vfs from the local device's eswitch. Fix this by updating the peer miss rules add and delete functions to use the peer device's eswitch and vf count instead of the local device's information, ensuring correct behavior regardless of vf configuration differences. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net/mlx5: Fix memory leak in cmd_exec()Chiara Meiohas1-2/+2
If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an error, resources allocated in cmd_exec() will not be freed. Fix the code to release the resources if mlx5_cmd_invoke() returns an error. Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements") Reported-by: Alex Tereshkin <atereshkin@nvidia.com> Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19be2net: Use correct byte order and format string for TCP seq and ack_seqAlok Tiwari1-4/+4
The TCP header fields seq and ack_seq are 32-bit values in network byte order as (__be32). these fields were earlier printed using ntohs(), which converts only 16-bit values and produces incorrect results for 32-bit fields. This patch is changeing the conversion to ntohl(), ensuring correct interpretation of these sequence numbers. Notably, the format specifier is updated from %d to %u to reflect the unsigned nature of these fields. improves the accuracy of debug log messages for TCP sequence and acknowledgment numbers during TX timeouts. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: bcmasp: Add support for re-starting auto-negotiationFlorian Fainelli1-0/+1
Wire-up ethtool_ops::nway_reset to phy_ethtool_nway_reset in order to support re-starting auto-negotiation. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250717180915.2611890-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_close_many/netif_close_many/Stanislav Fomichev1-1/+2
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. netif_close_many is used only by vlan/dsa and one mtk driver, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-8-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_set_threaded/netif_set_threaded/Stanislav Fomichev5-5/+5
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Note that one dev_set_threaded call still remains in mt76 for debugfs file. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-7-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/__dev_set_mtu/__netif_set_mtu/Stanislav Fomichev1-1/+1
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. __netif_set_mtu is used only by bond, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-5-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_pre_changeaddr_notify/netif_pre_changeaddr_notify/Stanislav Fomichev2-4/+6
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. netif_pre_changeaddr_notify is used only by ipvlan/bond, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_get_mac_address/netif_get_mac_address/Stanislav Fomichev2-3/+5
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. netif_get_mac_address is used only by tun/tap, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: s/dev_get_port_parent_id/netif_get_port_parent_id/Stanislav Fomichev1-1/+1
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: ti: icssg-prueth: Fix buffer allocation for ICSSGHimanshu Mittal5-73/+190
Fixes overlapping buffer allocation for ICSSG peripheral used for storing packets to be received/transmitted. There are 3 buffers: 1. Buffer for Locally Injected Packets 2. Buffer for Forwarding Packets 3. Buffer for Host Egress Packets In existing allocation buffers for 2. and 3. are overlapping causing packet corruption. Packet corruption observations: During tcp iperf testing, due to overlapping buffers the received ack packet overwrites the packet to be transmitted. So, we see packets on wire with the ack packet content inside the content of next TCP packet from sender device. Details for AM64x switch mode: -> Allocation by existing driver: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 | | | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 | | | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 | | Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 | | | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 | | | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 | | Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ --> here 16, 17, 18, 19 overlapping with below express buffer +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping | PRE | 70030000 | 70033800 | 70034000 | 70037800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 00000000 | 00000000 | <-- Field not configured +---------------------+----------+----------+ -> Allocation this patch brings: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 | | | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 | | | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 | | Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 | | | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 | | | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 | | Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70018000 | 7001C000 | 70058000 | 7005C000 | | PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 7001F800 | 7005F800 | +---------------------+----------+----------+ Rootcause: missing buffer configuration for Express frames in function: prueth_fw_offload_buffer_setup() Details: Driver implements two distinct buffer configuration functions that are invoked based on the driver state and ICSSG firmware:- - prueth_fw_offload_buffer_setup() - prueth_emac_buffer_setup() During initialization, driver creates standard network interfaces (netdevs) and configures buffers via prueth_emac_buffer_setup(). This function properly allocates and configures all required memory regions including: - LI buffers - Express packet buffers - Preemptible packet buffers However, when the driver transitions to an offload mode (switch/HSR/PRP), buffer reconfiguration is handled by prueth_fw_offload_buffer_setup(). This function does not reconfigure the buffer regions required for Express packets, leading to incorrect buffer allocation. Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19dpaa2-switch: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_switch_port_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19dpaa2-eth: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_eth_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-19net: track pfmemalloc drops via SKB_DROP_REASON_PFMEMALLOCJesper Dangaard Brouer1-4/+2
Add a new SKB drop reason (SKB_DROP_REASON_PFMEMALLOC) to track packets dropped due to memory pressure. In production environments, we've observed memory exhaustion reported by memory layer stack traces, but these drops were not properly tracked in the SKB drop reason infrastructure. While most network code paths now properly report pfmemalloc drops, some protocol-specific socket implementations still use sk_filter() without drop reason tracking: - Bluetooth L2CAP sockets - CAIF sockets - IUCV sockets - Netlink sockets - SCTP sockets - Unix domain sockets These remaining cases represent less common paths and could be converted in a follow-up patch if needed. The current implementation provides significantly improved observability into memory pressure events in the network stack, especially for key protocols like TCP and UDP, helping to diagnose problems in production environments. Reported-by: Matt Fleming <mfleming@cloudflare.com> Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/175268316579.2407873.11634752355644843509.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc6Alexei Starovoitov106-499/+986
Cross-merge BPF and other fixes after downstream PR. No conflicts. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-07-18ixgbevf: remove unused fields from struct ixgbevf_adapterYuto Ohnuki1-3/+0
Remove hw_rx_no_dma_resources and eitr_param fields from struct ixgbevf_adapter since these fields are never referenced in the driver. Note that the interrupt throttle rate is controlled by the rx_itr_setting and tx_itr_setting variables. This change simplifies the ixgbevf driver by removing unused fields, which improves maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igbvf: remove unused fields from struct igbvf_adapterYuto Ohnuki2-32/+0
Remove following unused fields from struct igbvf_adapter that are never referenced in the driver. - blink_timer - eeprom_wol - fc_autoneg - int_mode - led_status - mng_vlan_id - polling_interval - rx_dma_failed - test_icr - test_rx_ring - test_tx_ring - tx_dma_failed - tx_fifo_head - tx_fifo_size - tx_head_addr Also removed the following fields from struct igbvf_adapter since they are never read or used after initialization by igbvf_probe() and igbvf_sw_init(). - bd_number - rx_abs_int_delay - tx_abs_int_delay - rx_int_delay - tx_int_delay This changes simplify the igbvf driver by removing unused fields, which improves maintenability. Tested-by: Kohei Enju <enjuk@amazon.com> Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igc: Add wildcard rule support to ethtool NFC using Default QueueSong Yoong Siang4-3/+49
Introduce support for a lowest priority wildcard (catch-all) rule in ethtool's Network Flow Classification (NFC) for the igc driver. The wildcard rule directs all unmatched network traffic, including traffic not captured by Receive Side Scaling (RSS), to a specified queue. This functionality utilizes the Default Queue feature available in I225/I226 hardware. The implementation has been validated on Intel ADL-S systems with two back-to-back connected I226 network interfaces. Testing Procedure: 1. On the Device Under Test (DUT), verify the initial statistic: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 0 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 2. From the Link Partner, send 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 3. On the DUT, verify the packet reception on Queue 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 0 4. On the DUT, add a wildcard rule to route all packets to Queue 3: $ sudo ethtool -N enp1s0 flow-type ether queue 3 5. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 6. Now, packets are routed to Queue 3 by the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 0 rx_queue_2_packets: 0 rx_queue_3_packets: 10 7. On the DUT, add a EtherType rule to route ARP packet to Queue 1: $ sudo ethtool -N enp1s0 flow-type ether proto 0x0806 queue 1 8. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 9. Now, packets are routed to Queue 1 by the EtherType rule because it is higher priority than the wildcard (Default Queue) rule: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 10 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 10. On the DUT, delete all the NFC rules: $ sudo ethtool -N enp1s0 delete 63 $ sudo ethtool -N enp1s0 delete 64 11. From the Link Partner, send another 10 ARP packets: $ arping -c 10 -I enp170s0 169.254.1.2 12. Now, packets are routed to Queue 0 because the value of Default Queue is reset back to 0: $ ethtool -S enp1s0 | grep rx_q.*packets rx_queue_0_packets: 20 rx_queue_1_packets: 10 rx_queue_2_packets: 0 rx_queue_3_packets: 10 Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Co-developed-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Blanco Alcaine Hector <hector.blanco.alcaine@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18igc: Relocate RSS field definitions to igc_defines.hSong Yoong Siang2-4/+3
Move the RSS field definitions related to IPv4 and IPv6 UDP from igc.h to igc_defines.h to consolidate the RSS field definitions in a single header file, improving code organization and maintainability. This refactoring does not alter the functionality of the driver but enhances the logical grouping of related constants Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: breakout common LAG code into helpersDave Ertman4-35/+51
In the VF handling code, parts of the code for lag can be broken out into helper functions to reduce code duplication. Break this code out into helper functions Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: convert ice_add_prof() to bitmapJesse Brandeburg3-55/+34
Previously the ice_add_prof() took an array of u8 and looped over it with for_each_set_bit(), examining each 8 bit value as a bitmap. This was just hard to understand and unnecessary, and was triggering undefined behavior sanitizers with unaligned accesses within bitmap fields (on our internal tools/builds). Since the @ptype being passed in was already declared as a bitmap, refactor this to use native types with the advantage of simplifying the code to use a single loop. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> CC: Jesse Brandeburg <jbrandeburg@cloudflare.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-18ice: add E835 device IDsDawid Osuchowski3-0/+36
E835 is an enhanced version of the E830. It continues to use the same set of commands, registers and interfaces as other devices in the 800 Series. Following device IDs are added: - 0x1248: Intel(R) Ethernet Controller E835-CC for backplane - 0x1249: Intel(R) Ethernet Controller E835-CC for QSFP - 0x124A: Intel(R) Ethernet Controller E835-CC for SFP - 0x1261: Intel(R) Ethernet Controller E835-C for backplane - 0x1262: Intel(R) Ethernet Controller E835-C for QSFP - 0x1263: Intel(R) Ethernet Controller E835-C for SFP - 0x1265: Intel(R) Ethernet Controller E835-L for backplane - 0x1266: Intel(R) Ethernet Controller E835-L for QSFP - 0x1267: Intel(R) Ethernet Controller E835-L for SFP Reviewed-by: Konrad Knitter <konrad.knitter@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-09 17:32:17 +0300