summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2025-01-28bonding: Correctly support GSO ESP offloadCosmin Ratiu1-9/+10
The referenced fix is incomplete. It correctly computes bond_dev->gso_partial_features across slaves, but unfortunately netdev_fix_features discards gso_partial_features from the feature set if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features. This is visible with ethtool -k bond0 | grep esp: tx-esp-segmentation: off [requested on] esp-hw-offload: on esp-tx-csum-hw-offload: on This patch reworks the bonding GSO offload support by: - making aggregating gso_partial_features across slaves similar to the other feature sets (this part is a no-op). - advertising the default partial gso features on empty bond devs, same as with other feature sets (also a no-op). - adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves. - adding NETIF_F_GSO_PARTIAL to features in bond_setup() With all of these, 'ethtool -k bond0 | grep esp' now reports: tx-esp-segmentation: on esp-hw-offload: on esp-tx-csum-hw-offload: on Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28net: stmmac: Specify hardware capability value when FIFO size isn't specifiedKunihiko Hayashi1-17/+18
When Tx/Rx FIFO size is not specified in advance, the driver checks if the value is zero and sets the hardware capability value in functions where that value is used. Consolidate the check and settings into function stmmac_hw_init() and remove redundant other statements. If FIFO size is zero and the hardware capability also doesn't have upper limit values, return with an error message. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28net: stmmac: Limit FIFO size by hardware capabilityKunihiko Hayashi1-0/+15
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from stmmac_platform layer. However, these values are constrained by upper limits determined by the capabilities of each hardware feature. There is a risk that the upper bits will be truncated due to the calculation, so it's appropriate to limit them to the upper limit values and display a warning message. This only works if the hardware capability has the upper limit values. Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28net: stmmac: Limit the number of MTL queues to hardware capabilityKunihiko Hayashi1-0/+15
The number of MTL queues to use is specified by the parameter "snps,{tx,rx}-queues-to-use" from stmmac_platform layer. However, the maximum numbers of queues are constrained by upper limits determined by the capability of each hardware feature. It's appropriate to limit the values not to exceed the upper limit values and display a warning message. This only works if the hardware capability has the upper limit values. Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: document scope of NCM implementationFoster Snowhill1-0/+8
Clarify that the "NCM" implementation in `ipheth` is very limited, as iOS devices aren't compatible with the CDC NCM specification in regular tethering mode. For a standards-compliant implementation, one shall turn to the `cdc_ncm` module. Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: fix DPE OoB readFoster Snowhill1-3/+1
Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: break up NCM header size computationFoster Snowhill1-1/+12
Originally, the total NCM header size was computed as the sum of two vaguely labelled constants. While accurate, it wasn't particularly clear where they were coming from. Use sizes of existing NCM structs where available. Define the total NDP16 size based on the maximum amount of DPEs that can fit into the iOS-specific fixed-size header. This change does not fix any particular issue. Rather, it introduces intermediate constants that will simplify subsequent commits. It should also make it clearer for the reader where the constant values come from. Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: refactor NCM datagram loopFoster Snowhill1-19/+23
Introduce an rx_error label to reduce repetitions in the header signature checks. Store wDatagramIndex and wDatagramLength after endianness conversion to avoid repeated le16_to_cpu() calls. Rewrite the loop to return on a null trailing DPE, which is required by the CDC NCM spec. In case it is missing, fall through to rx_error. This change does not fix any particular issue. Its purpose is to simplify a subsequent commit that fixes a potential OoB read by limiting the maximum amount of processed DPEs. Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: use static NDP16 location in URBFoster Snowhill1-5/+4
Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: check that DPE points past NCM headerFoster Snowhill1-1/+2
By definition, a DPE points at the start of a network frame/datagram. Thus it makes no sense for it to point at anything that's part of the NCM header. It is not a security issue, but merely an indication of a malformed DPE. Enforce that all DPEs point at the data portion of the URB, past the NCM header. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28usbnet: ipheth: fix possible overflow in DPE length checkFoster Snowhill1-2/+2
Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length. Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support") Cc: stable@vger.kernel.org Signed-off-by: Foster Snowhill <forst@pen.gy> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28net: usb: rtl8150: enable basic endpoint checkingNikita Zhandarovich1-0/+22
Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-28Merge branch '200GbE' of ↵Jakub Kicinski9-27/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-24 (idpf, ice, iavf) For idpf: Emil adds memory barrier when accessing control queue descriptors and restores call to idpf_vc_xn_shutdown() when resetting. Manoj Vishwanathan expands transaction lock to properly protect xn->salt value and adds additional debugging information. Marco Leogrande converts workqueues to be unbound. For ice: Przemek fixes incorrect size use for array. Mateusz removes reporting of invalid parameter and value. For iavf: Michal adjusts some VLAN changes to occur without a PF call to avoid timing issues with the calls. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: allow changing VLAN state without calling PF ice: remove invalid parameter of equalizer ice: fix ice_parser_rt::bst_key array size idpf: add more info during virtchnl transaction timeout/salt mismatch idpf: convert workqueues to unbound idpf: Acquire the lock before accessing the xn->salt idpf: fix transaction timeouts on reset idpf: add read memory barrier when checking descriptor done bit ==================== Link: https://patch.msgid.link/20250124213213.1328775-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28net: davicom: fix UAF in dm9000_drv_removeChenyuan Yang1-1/+2
dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool. Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28net: phy: c45-tjaxx: add delay between MDIO write and read in soft_resetMilos Reljin1-0/+2
In application note (AN13663) for TJA1120, on page 30, there's a figure with average PHY startup timing values following software reset. The time it takes for SMI to become operational after software reset ranges roughly from 500 us to 1500 us. This commit adds 2000 us delay after MDIO write which triggers software reset. Without this delay, soft_reset function returns an error and prevents successful PHY init. Cc: stable@vger.kernel.org Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103") Signed-off-by: Milos Reljin <milos_reljin@outlook.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28vxlan: Fix uninit-value in vxlan_vnifilter_dump()Shigeru Yoshida1-0/+5
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1]. If the length of the netlink message payload is less than sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes beyond the message. This can lead to uninit-value access. Fix this by returning an error in such situations. [1] BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422 rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786 netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317 __netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432 netlink_dump_start include/linux/netlink.h:340 [inline] rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline] rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882 netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4110 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205 kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196 netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:726 ____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672 x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250123145746.785768-1-syoshida@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28netdevsim: don't assume core pre-populates HDS params on GETJakub Kicinski1-1/+1
Syzbot reports: BUG: KMSAN: uninit-value in nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77 nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77 ethtool_set_ringparam+0x268/0x570 net/ethtool/ioctl.c:2072 __dev_ethtool net/ethtool/ioctl.c:3209 [inline] dev_ethtool+0x126d/0x2a40 net/ethtool/ioctl.c:3398 dev_ioctl+0xb0e/0x1280 net/core/dev_ioctl.c:759 This is the SET path, where we call GET to either check user request against max values, or check if any of the settings will change. The logic in netdevsim is trying to report the default (ENABLED) if user has not requested any specific setting. The user setting is recorded in dev->cfg, don't depend on kernel_ringparam being pre-populated with it. Fixes: 928459bbda19 ("net: ethtool: populate the default HDS params in the core") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com Tested-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com Link: https://patch.msgid.link/20250123221410.1067678-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28wifi: mt76: move napi_enable() from under BHJakub Kicinski12-36/+69
mt76 does a lot of: local_bh_disable(); napi_enable(...napi); napi_schedule(...napi); local_bh_enable(); local_bh_disable() is not a real lock, its most likely taken because napi_schedule() requires that we invoke softirqs at some point. napi_enable() needs to take a mutex, so move it from under the BH protection. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: via-rhine: fix calling napi_enable() in atomic contextJakub Kicinski1-1/+10
napi_enable() may sleep now, take netdev_lock() before rp->lock. napi_enable() is hidden inside init_registers(). Note that this patch orders netdev_lock after rp->task_lock, to avoid having to take the netdev_lock() around disable path. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: niu: fix calling napi_enable() in atomic contextJakub Kicinski1-1/+9
napi_enable() may sleep now, take netdev_lock() before np->lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: 8139too: fix calling napi_enable() in atomic contextJakub Kicinski1-1/+3
napi_enable() may sleep now, take netdev_lock() before tp->lock and tp->rx_lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://patch.msgid.link/20250124031841.1179756-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: forcedeth: fix calling napi_enable() in atomic contextJakub Kicinski1-1/+3
napi_enable() may sleep now, take netdev_lock() before np->lock. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: forcedeth: remove local wrappers for napi enable/disableJakub Kicinski1-22/+8
The local helpers for calling napi_enable() and napi_disable() don't serve much purpose and they will complicate the fix in the subsequent patch. Remove them, call the core functions directly. Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250124031841.1179756-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28eth: tg3: fix calling napi_enable() in atomic contextJakub Kicinski1-4/+31
tg3 has a spin lock protecting most of the config, switch to taking netdev_lock() explicitly on enable/start paths. Disable/stop paths seem to not be under the spin lock (since napi_disable() already needs to sleep), so leave that side as is. tg3_restart_hw() releases and re-takes the spin lock, we need to do the same because dev_close() needs to take netdev_lock(). Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250124031841.1179756-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28net/mlx5e: add missing cpu_to_node to kvzalloc_node in mlx5e_open_xdpredirect_sqStanislav Fomichev1-1/+1
kvzalloc_node is not doing a runtime check on the node argument (__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES triggers OOB access and panic (see the trace below). Add missing cpu_to_node call to convert cpu id to node id. [ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up [ 166.479327] BUG: unable to handle page fault for address: 0000000800000010 [ 166.494592] #PF: supervisor read access in kernel mode [ 166.505995] #PF: error_code(0x0000) - not-present page ... [ 166.816958] Call Trace: [ 166.822380] <TASK> [ 166.827034] ? __die_body+0x64/0xb0 [ 166.834774] ? page_fault_oops+0x2cd/0x3f0 [ 166.843862] ? exc_page_fault+0x63/0x130 [ 166.852564] ? asm_exc_page_fault+0x22/0x30 [ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.871897] ? get_partial_node+0x1c/0x320 [ 166.880983] ? deactivate_slab+0x269/0x2b0 [ 166.890069] ___slab_alloc+0x521/0xa90 [ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.908442] __kmalloc_node_noprof+0x216/0x3f0 [ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0 [ 166.928354] __kvmalloc_node_noprof+0x43/0xd0 [ 166.938021] mlx5e_open_channels+0x5e2/0xc00 [ 166.947496] mlx5e_open_locked+0x3e/0xf0 [ 166.956201] mlx5e_open+0x23/0x50 [ 166.963551] __dev_open+0x114/0x1c0 [ 166.971292] __dev_change_flags+0xa2/0x1b0 [ 166.980378] dev_change_flags+0x21/0x60 [ 166.988887] do_setlink+0x38d/0xf20 [ 166.996628] ? ep_poll_callback+0x1b9/0x240 [ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70 [ 167.020782] ? __wake_up_sync_key+0x52/0x80 [ 167.030066] ? __mutex_lock+0xff/0x550 [ 167.038382] ? security_capable+0x50/0x90 [ 167.047279] rtnl_setlink+0x1c9/0x210 [ 167.055403] ? ep_poll_callback+0x1b9/0x240 [ 167.064684] ? security_capable+0x50/0x90 [ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310 [ 167.082667] ? rtnetlink_bind+0x30/0x30 [ 167.091173] netlink_rcv_skb+0xb1/0xe0 [ 167.099492] netlink_unicast+0x20f/0x2e0 [ 167.108191] netlink_sendmsg+0x389/0x420 [ 167.116896] __sys_sendto+0x158/0x1c0 [ 167.125024] __x64_sys_sendto+0x22/0x30 [ 167.133534] do_syscall_64+0x63/0x130 [ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0 [ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: bb135e40129d ("net/mlx5e: move XDP_REDIRECT sq to dynamic allocation") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250123000407.3464715-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-28net: netdevsim: try to close UDP port harness racesJakub Kicinski2-9/+15
syzbot discovered that we remove the debugfs files after we free the netdev. Try to clean up the relevant dir while the device is still around. Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-27Merge tag 'mm-nonmm-stable-2025-01-24-23-16' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Mainly individually changelogged singleton patches. The patch series in this pull are: - "lib min_heap: Improve min_heap safety, testing, and documentation" from Kuan-Wei Chiu provides various tightenings to the min_heap library code - "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms some cleanup and Rust preparation in the xarray library code - "Update reference to include/asm-<arch>" from Geert Uytterhoeven fixes pathnames in some code comments - "Converge on using secs_to_jiffies()" from Easwar Hariharan uses the new secs_to_jiffies() in various places where that is appropriate - "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen switches two filesystems to the new mount API - "Convert ocfs2 to use folios" from Matthew Wilcox does that - "Remove get_task_comm() and print task comm directly" from Yafang Shao removes now-unneeded calls to get_task_comm() in various places - "squashfs: reduce memory usage and update docs" from Phillip Lougher implements some memory savings in squashfs and performs some maintainability work - "lib: clarify comparison function requirements" from Kuan-Wei Chiu tightens the sort code's behaviour and adds some maintenance work - "nilfs2: protect busy buffer heads from being force-cleared" from Ryusuke Konishi fixes an issues in nlifs when the fs is presented with a corrupted image - "nilfs2: fix kernel-doc comments for function return values" from Ryusuke Konishi fixes some nilfs kerneldoc - "nilfs2: fix issues with rename operations" from Ryusuke Konishi addresses some nilfs BUG_ONs which syzbot was able to trigger - "minmax.h: Cleanups and minor optimisations" from David Laight does some maintenance work on the min/max library code - "Fixes and cleanups to xarray" from Kemeng Shi does maintenance work on the xarray library code" * tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits) ocfs2: use str_yes_no() and str_no_yes() helper functions include/linux/lz4.h: add some missing macros Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent Xarray: remove repeat check in xas_squash_marks() Xarray: distinguish large entries correctly in xas_split_alloc() Xarray: move forward index correctly in xas_pause() Xarray: do not return sibling entries from xas_find_marked() ipc/util.c: complete the kernel-doc function descriptions gcov: clang: use correct function param names latencytop: use correct kernel-doc format for func params minmax.h: remove some #defines that are only expanded once minmax.h: simplify the variants of clamp() minmax.h: move all the clamp() definitions after the min/max() ones minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp() minmax.h: reduce the #define expansion of min(), max() and clamp() minmax.h: update some comments minmax.h: add whitespace around operators and after commas nilfs2: do not update mtime of renamed directory that is not moved nilfs2: handle errors that nilfs_prepare_chunk() may return CREDITS: fix spelling mistake ...
2025-01-26Merge tag 'pci-v6.14-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Batch sizing of multiple BARs while memory decoding is disabled instead of disabling/enabling decoding for each BAR individually; this optimizes virtualized environments where toggling decoding enable is expensive (Alex Williamson) - Add host bridge .enable_device() and .disable_device() hooks for bridges that need to configure things like Requester ID to StreamID mapping when enabling devices (Frank Li) - Extend struct pci_ecam_ops with .enable_device() and .disable_device() hooks so drivers that use pci_host_common_probe() instead of their own .probe() have a way to set the .enable_device() callbacks (Marc Zyngier) - Drop 'No bus range found' message so we don't complain when DTs don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas) - Rename the drivers/pci/of_property.c struct of_pci_range to of_pci_range_entry to avoid confusion with the global of_pci_range in include/linux/of_address.h (Bjorn Helgaas) Driver binding: - Update resource request API documentation to encourage callers to supply a driver name when requesting resources (Philipp Stanner) - Export pci_intx_unmanaged() and pcim_intx() (always managed) so callers of pci_intx() (which is sometimes managed) can explicitly choose the one they need (Philipp Stanner) - Convert drivers from pci_intx() to always-managed pcim_intx() or never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix, pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna, ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner) - Remove pci_intx_unmanaged() since pci_intx() is now always unmanaged and pcim_intx() is always managed (Philipp Stanner) Error handling: - Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging rather than building their own (Ilpo Järvinen) - Move TLP Log handling to its own file (Ilpo Järvinen) - Store number of supported End-End TLP Prefixes always so we can read the correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen) - Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log() (Ilpo Järvinen) - Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix Log (Ilpo Järvinen) - Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor BIOSes that don't configure it correctly (Takashi Iwai) ASPM: - Save parent L1 PM Substates config so when we restore it along with an endpoint's config, the parent info isn't junk (Jian-Hong Pan) Power management: - Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because the system can't wake up from suspend (Werner Sembach) Endpoint framework: - Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't call devres_release() (Zijun Hu) - Finish virtual EP removal in pci_epf_remove_vepf(), which previously caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu) - Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't depend on the BAR_MASK reset value being larger than the requested BAR size (Niklas Cassel) - Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads from bypassing the iATU if we reduced the BAR size (Niklas Cassel) - Verify address alignment when programming iATU so we don't attempt to write bits that are read-only because of the BAR size, which could lead to directing accesses to the wrong address (Niklas Cassel) - Implement artpec6 pci_epc_features so we can rely on all drivers supporting it so we can use it in EPC core code (Niklas Cassel) - Check for BARs of fixed size to prevent endpoint drivers from trying to change their size (Niklas Cassel) - Verify that requested BAR size is a power of two when endpoint driver sets the BAR (Niklas Cassel) Endpoint framework tests: - Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing dma_chan_rx (Mohamed Khalfella) - Correct the DMA MEMCPY test so it doesn't fail if the Endpoint supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam) - Add pci-epf-test and pci_endpoint_test support for capabilities (Niklas Cassel) - Add Endpoint test for consecutive BARs (Niklas Cassel) - Remove redundant comparison from Endpoint BAR test because a > 1MB BAR can always be exactly covered by iterating with a 1MB buffer (Hans Zhang) - Move and convert PCI Endpoint tests from tools/pci to Kselftests (Manivannan Sadhasivam) Apple PCIe controller driver: - Convert StreamID mapping configuration from a bus notifier to the .enable_device() and .disable_device() callbacks (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Add Requester ID to StreamID mapping configuration when enabling devices (Frank Li) - Use DWC core suspend/resume functions for imx6 (Frank Li) - Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard Zhu) - Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li) - Add DT binding for optional i.MX95 Refclk and driver support to enable it if the platform hasn't enabled it (Richard Zhu) - Configure PHY based on controller being in Root Complex or Endpoint mode (Frank Li) - Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources() instead of hardcoding them (Richard Zhu) - Deassert apps_reset in imx_pcie_deassert_core_reset() since it is asserted in imx_pcie_assert_core_reset() (Richard Zhu) - Add missing reference clock enable or disable logic for IMX6SX, IMX7D, IMX8MM (Richard Zhu) - Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu) Freescale Layerscape PCIe controller driver: - Simplify by using syscon_regmap_lookup_by_phandle_args() instead of syscon_regmap_lookup_by_phandle() followed by of_property_read_u32_array() (Krzysztof Kozlowski) Marvell MVEBU PCIe controller driver: - Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen) MediaTek PCIe Gen3 controller driver: - Use clk_bulk_prepare_enable() instead of separate clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi) - Rearrange reset assert/deassert so they're both done in the *_power_up() callbacks (Lorenzo Bianconi) - Document that Airoha EN7581 requires PHY init and power-on before PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo Bianconi) - Move Airoha EN7581 post-reset delay from the en7581 clock .enable() method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi) - Sleep instead of delay during Airoha EN7581 power-up, since this is a non-atomic context (Lorenzo Bianconi) - Skip PERST# assertion on Airoha EN7581 during probe and suspend/resume to avoid a hardware defect (Lorenzo Bianconi) - Enable async probe to reduce system startup time (Douglas Anderson) Microchip PolarFlare PCIe controller driver: - Set up the inbound address translation based on whether the platform allows coherent or non-coherent DMA (Daire McNamara) - Update DT binding such that platforms are DMA-coherent by default and must specify 'dma-noncoherent' if needed (Conor Dooley) Mobiveil PCIe controller driver: - Convert mobiveil-pcie.txt to YAML and update 'interrupt-names' and 'reg-names' (Frank Li) Qualcomm PCIe controller driver: - Add DT SM8550 and SM8650 optional 'global' interrupt for link events (Neil Armstrong) - Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta Mylavarapu) - If 'global' IRQ is supported for detection of Link Up events, tell DWC core not to wait for link up (Krishna chaitanya chundru) Renesas R-Car PCIe controller driver: - Avoid passing stack buffer as resource name (King Dix) Rockchip PCIe controller driver: - Simplify clock and reset handling by using bulk interfaces (Anand Moon) - Pass typed rockchip_pcie (not void) pointer to rockchip_pcie_disable_clocks() (Anand Moon) - Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Use dll_link_up IRQ to detect Link Up and enumerate devices so users don't have to manually rescan (Niklas Cassel) - Tell DWC core not to wait for link up since the 'sys' interrupt is required and detects Link Up events (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Don't wait for link up in DWC core if driver can detect Link Up event (Krishna chaitanya chundru) - Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru) - Always stop link in dw_pcie_suspend_noirq(), which is required at least for i.MX8QM to re-establish link on resume (Richard Zhu) - Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu) - Add struct of_pci_range.parent_bus_addr for devices that need their immediate parent bus address, not the CPU address, e.g., to program an internal Address Translation Unit (iATU) (Frank Li) TI DRA7xx PCIe controller driver: - Simplify by using syscon_regmap_lookup_by_phandle_args() instead of syscon_regmap_lookup_by_phandle() followed by of_parse_phandle_with_fixed_args() or of_property_read_u32_index() (Krzysztof Kozlowski) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Xilinx Versal CPM5 (Thippeswamy Havalige) MicroSemi Switchtec management driver: - Add Microchip PCI100X device IDs (Rakesh Babu Saladi) Miscellaneous: - Move reset related sysfs code from pci.c to pci-sysfs.c where other similar code lives (Ilpo Järvinen) - Simplify reset_method_store() memory management by using __free() instead of explicit kfree() cleanup (Ilpo Järvinen) - Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM ACPI hotplug driver (Thomas Weißschuh) - Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong Zhang) - Correct documentation of the 'config_acs=' kernel parameter (Akihiko Odaki)" * tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits) PCI: Batch BAR sizing operations dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent PCI: microchip: Set inbound address translation for coherent or non-coherent mode Documentation: Fix pci=config_acs= example PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT PCI: Don't include 'pm_wakeup.h' directly selftests: pci_endpoint: Migrate to Kselftest framework selftests: Move PCI Endpoint tests from tools/pci to Kselftests misc: pci_endpoint_test: Fix IOCTL return value dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML PCI: switchtec: Add Microchip PCI100X device IDs misc: pci_endpoint_test: Remove redundant 'remainder' test misc: pci_endpoint_test: Add consecutive BAR test misc: pci_endpoint_test: Add support for capabilities PCI: endpoint: pci-epf-test: Add support for capabilities PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error PCI: dwc: Simplify config resource lookup ...
2025-01-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-8/+40
Pull rdma updates from Jason Gunthorpe: "Lighter that normal, but the now usual collection of driver fixes and small improvements: - Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp, efa, cxgb4 - Update mlx4 to use the new umem APIs, avoiding direct use of scatterlist - Support ROCEv2 in erdma - Remove various uncalled functions, constify bin_attribute - Provide core infrastructure to catch netdev events and route them to drivers, consolidating duplicated driver code - Fix rare race condition crashes in mlx5 ODP flows" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits) RDMA/mlx5: Fix implicit ODP use after free RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error RDMA/qib: Constify 'struct bin_attribute' RDMA/hfi1: Constify 'struct bin_attribute' RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]" RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event RDMA/bnxt_re: Allocate dev_attr information dynamically RDMA/bnxt_re: Pass the context for ulp_irq_stop RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event RDMA/bnxt_re: Query firmware defaults of CC params during probe RDMA/bnxt_re: Add Async event handling support bnxt_en: Add ULP call to notify async events RDMA/mlx5: Fix indirect mkey ODP page count MAINTAINERS: Update the bnxt_re maintainers RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS RDMA/rtrs: Add missing deinit() call RDMA/efa: Align interrupt related fields to same type RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error RDMA/mlx5: Fix link status down event for MPV RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts ...
2025-01-24iavf: allow changing VLAN state without calling PFMichal Swiatkowski1-2/+17
First case: > ip l a l $VF name vlanx type vlan id 100 > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 As workqueue can be execute after sometime, there is a window to have call trace like that: - iavf_del_vlan - iavf_add_vlan - iavf_del_vlans (wq) It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state won't be changed because VLAN 100 is on the filter list. The final result is that the VLAN 100 filter isn't added in hardware (no iavf_add_vlans call). To fix that change the state if the filter wasn't removed yet directly to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message wasn't sent yet. Second case: > ip l a l $VF name vlanx type vlan id 100 Any type of VF reset ex. change trust > ip l s $PF vf $VF_NUM trust on > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 In case of reset iavf driver is responsible for readding all filters that are being used. To do that all VLAN filters state are changed to IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from kernel side, as workqueue isn't called immediately. We can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_del_vlans (wq) Not exsisitng VLAN filters will be removed from hardware. It isn't a bug, ice driver will handle it fine. However, we can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_add_vlan (called from kernel ops) - iavf_del_vlans (wq) With fix for previous case we end up with no VLAN filters in hardware. We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message wasn't sent yet. Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: remove invalid parameter of equalizerMateusz Polchlopek3-3/+0
It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d <ethX> returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: fix ice_parser_rt::bst_key array sizePrzemek Kitszel2-11/+7
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20 in the initial impl commit (see Fixes tag). All usage code assumed it was of size 20. That was also the initial size present up to v2 of the intro series [2], but halved by v3 [3] refactor described as "Replace magic hardcoded values with macros." The introducing series was so big that some ugliness was unnoticed, same for bugs :/ ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one. There was tmp variable @j in the scope of edited function, but was not used in all places. This ugliness is now gone. I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of the holes in order to compensate for the added 10 bytes to the ::bst_key, resulting in the same size of the whole as prior to the fix, and minimal changes in the offsets of the fields. Extend also the debug dump print of the key to cover all bytes. To not have string with 20 "%02x" and 20 params, switch to ice_debug_array_w_prefix(). This fix obsoletes Ahmed's attempt at [1]. [1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com [2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com [3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop") CC: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24wifi: ath12k: fix handling of 6 GHz rulesAditya Kumar Singh2-17/+45
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules list, the number of 5 GHz rules is set to a default constant value of 4 (REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz rules, the current logic will bypass the legitimate 6 GHz rules. For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the current logic will only consider 4 of the 5 GHz rules, treating the last valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never processed, leading to the eventual disabling of 6 GHz channels. To fix this issue, instead of hardcoding the value to 4, use a helper function to determine the number of 6 GHz rules present in the 5 GHz rules list and ignore only those rules. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250123-fix_6ghz_rules_handling-v1-1-d734bfa58ff4@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-24idpf: add more info during virtchnl transaction timeout/salt mismatchManoj Vishwanathan1-4/+7
Add more information related to the transaction like cookie, vc_op, salt when transaction times out and include similar information when transaction salt does not match. Info output for transaction timeout: ------------------- (op:5015 cookie:45fe vc_op:5015 salt:45 timeout:60000ms) ------------------- before it was: ------------------- (op 5015, 60000ms) ------------------- Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: convert workqueues to unboundMarco Leogrande1-5/+10
When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. Tested: * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Marco Leogrande <leogrande@google.com> Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: Acquire the lock before accessing the xn->saltManoj Vishwanathan1-1/+2
The transaction salt was being accessed before acquiring the idpf_vc_xn_lock when idpf has to forward the virtchnl reply. Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager") Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: fix transaction timeouts on resetEmil Tantilov1-1/+10
Restore the call to idpf_vc_xn_shutdown() at the beginning of idpf_vc_core_deinit() provided the function is not called on remove. In the reset path the mailbox is destroyed, leading to all transactions timing out. Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: add read memory barrier when checking descriptor done bitEmil Tantilov1-0/+6
Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c727561a ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Suggested-by: Lance Richardson <rlance@google.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-23net: mvneta: fix locking in mvneta_cpu_online()Harshit Mogalapalli1-0/+1
When port is stopped, unlock before returning Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250121005002.3938236-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-23net: fec: implement TSO descriptor cleanupDheeraj Reddy Jonnalagadda1-1/+30
Implement cleanup of descriptors in the TSO error path of fec_enet_txq_submit_tso(). The cleanup - Unmaps DMA buffers for data descriptors skipping TSO header - Clears all buffer descriptors - Handles extended descriptors by clearing cbd_esc when enabled Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250120085430.99318-1-dheeraj.linuxdev@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-23net: phy: marvell-88q2xxx: Fix temperature measurement with reset-gpiosDimitri Fedrau1-7/+26
When using temperature measurement on Marvell 88Q2XXX devices and the reset-gpios property is set in DT, the device does a hardware reset when interface is brought down and up again. That means that the content of the register MDIO_MMD_PCS_MV_TEMP_SENSOR2 is reset to default and that leads to permanent deactivation of the temperature measurement, because activation is done in mv88q2xxx_probe. To fix this move activation of temperature measurement to mv88q222x_config_init. Fixes: a557a92e6881 ("net: phy: marvell-88q2xxx: add support for temperature sensor") Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250118-marvell-88q2xxx-fix-hwmon-v2-1-402e62ba2dcb@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-23net: hns3: fix oops when unload drivers parallelingJian Shen5-0/+23
When unload hclge driver, it tries to disable sriov first for each ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at the time, because it removes all the ae_dev nodes, and it may cause oops. But we can't simply use hnae3_common_lock for this. Because in the process flow of pci_disable_sriov(), it will trigger the remove flow of VF, which will also take hnae3_common_lock. To fixes it, introduce a new mutex to protect the unload process. Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-23net: airoha: Fix wrong GDM4 register definitionChristian Marangi1-2/+2
Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at offset 0x2400 but this doesn't make sense as it does conflict with the CDM4 that is in the same location. Following the pattern where each GDM base is at the FWD_CFG, currently GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the 0x2400 offset. Fix these 2 define by subtracting 0x100 to each register to reflect the real address location. Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250120154148.13424-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-22Merge tag 'net-next-6.14' of ↵Linus Torvalds799-11471/+39143
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "This is slightly smaller than usual, with the most interesting work being still around RTNL scope reduction. Core: - More core refactoring to reduce the RTNL lock contention, including preparatory work for the per-network namespace RTNL lock, replacing RTNL lock with a per device-one to protect NAPI-related net device data and moving synchronize_net() calls outside such lock. - Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and more specific TCP coverage. - Reduce network namespace tear-down time by removing per-subsystems synchronize_net() in tipc and sched. - Add flow label selector support for fib rules, allowing traffic redirection based on such header field. Netfilter: - Do not remove netdev basechain when last device is gone, allowing netdev basechains without devices. - Revisit the flowtable teardown strategy, dealing better with fin, reset and re-open events. - Scale-up IP-vs connection dumping by avoiding linear search on each restart. Protocols: - A significant XDP socket refactor, consolidating and optimizing several helpers into the core - Better scaling of ICMP rate-limiting, by removing false-sharing in inet peers handling. - Introduces netlink notifications for multicast IPv4 and IPv6 address changes. - Add ipsec support for IP-TFS/AggFrag encapsulation, allowing aggregation and fragmentation of the inner IP. - Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to avoid local port exhaustion issues when the average connection lifetime is very short. - Support updating keys (re-keying) for connections using kernel TLS (for TLS 1.3 only). - Support ipv4-mapped ipv6 address clients in smc-r v2. - Add support for jumbo data packet transmission in RxRPC sockets, gluing multiple data packets in a single UDP packet. - Support RxRPC RACK-TLP to manage packet loss and retransmission in conjunction with the congestion control algorithm. Driver API: - Introduce a unified and structured interface for reporting PHY statistics, exposing consistent data across different H/W via ethtool. - Make timestamping selectable, allow the user to select the desired hwtstamp provider (PHY or MAC) administratively. - Add support for configuring a header-data-split threshold (HDS) value via ethtool, to deal with partial or buggy H/W implementation. - Consolidate DSA drivers Energy Efficiency Ethernet support. - Add EEE management to phylink, making use of the phylib implementation. - Add phylib support for in-band capabilities negotiation. - Simplify how phylib-enabled mac drivers expose the supported interfaces. Tests and tooling: - Make the YNL tool package-friendly to make it easier to deploy it separately from the kernel. - Increase TCP selftest coverage importing several packetdrill test-cases. - Regenerate the ethtool uapi header from the YNL spec, to ease maintenance and future development. - Add YNL support for decoding the link types used in net self-tests, allowing a single build to run both net and drivers/net. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - add cross E-Switch QoS support - add SW Steering support for ConnectX-8 - implement support for HW-Managed Flow Steering, improving the rule deletion/insertion rate - support for multi-host LAG - Intel (ixgbe, ice, igb): - ice: add support for devlink health events - ixgbe: add initial support for E610 chipset variant - igb: add support for AF_XDP zero-copy - Meta: - add support for basic RSS config - allow changing the number of channels - add hardware monitoring support - Broadcom (bnxt): - implement TCP data split and HDS threshold ethtool support, enabling Device Memory TCP. - Marvell Octeon: - implement egress ipsec offload support for the cn10k family - Hisilicon (HIBMC): - implement unicast MAC filtering - Ethernet NICs embedded and virtual: - Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding contented atomic operations for drop counters - Freescale: - quicc: phylink conversion - enetc: support Tx and Rx checksum offload and improve TSO performances - MediaTek: - airoha: introduce support for ETS and HTB Qdisc offload - Microchip: - lan78XX USB: preparation work for phylink conversion - Synopsys (stmmac): - support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45 - refactor EEE support to leverage the new driver API - optimize DMA and cache access to increase raw RX performances by 40% - TI: - icssg-prueth: add multicast filtering support for VLAN interface - netkit: - add ability to configure head/tailroom - VXLAN: - accepts packets with user-defined reserved bit - Ethernet switches: - Microchip: - lan969x: add RGMII support - lan969x: improve TX and RX performance using the FDMA engine - nVidia/Mellanox: - move Tx header handling to PCI driver, to ease XDP support - Ethernet PHYs: - Texas Instruments DP83822: - add support for GPIO2 clock output - Realtek: - 8169: add support for RTL8125D rev.b - rtl822x: add hwmon support for the temperature sensor - Microchip: - add support for RDS PTP hardware - consolidate periodic output signal generation - CAN: - several DT-bindings to DT schema conversions - tcan4x5x: - add HW standby support - support nWKRQ voltage selection - kvaser: - allowing Bus Error Reporting runtime configuration - WiFi: - the on-going Multi-Link Operation (MLO) effort continues, affecting both the stack and in drivers - mac80211/cfg80211: - Emergency Preparedness Communication Services (EPCS) station mode support - support for adding and removing station links for MLO - add support for WiFi 7/EHT mesh over 320 MHz channels - report Tx power info for each link - RealTek (rtw88): - enable USB Rx aggregation and USB 3 to improve performance - LED support - RealTek (rtw89): - refactor power save to support Multi-Link Operations - add support for RTL8922AE-VS variant - MediaTek (mt76): - single wiphy multiband support (preparation for MLO) - p2p device support - add TP-Link TXE50UH USB adapter support - Qualcomm (ath10k): - support for the QCA6698AQ IP core - Qualcomm (ath12k): - enable MLO for QCN9274 - Bluetooth: - Allow sysfs to trigger hdev reset, to allow recovering devices not responsive from user-space - MediaTek: add support for MT7922, MT7925, MT7921e devices - Realtek: add support for RTL8851BE devices - Qualcomm: add support for WCN785x devices - ISO: allow BIG re-sync" * tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits) net/rose: prevent integer overflows in rose_setsockopt() net: phylink: fix regression when binding a PHY net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL. ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL. ipv6: Move lifetime validation to inet6_rtm_newaddr(). ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr(). ipv6: Pass dev to inet6_addr_add(). ipv6: Convert inet6_ioctl() to per-netns RTNL. ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup(). ipv6: Hold rtnl_net_lock() in addrconf_dad_work(). ipv6: Hold rtnl_net_lock() in addrconf_verify_work(). ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL. ipv6: Add __in6_dev_get_rtnl_net(). net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags net: mii: Fix the Speed display when the network cable is not connected sysctl net: Remove macro checks for CONFIG_SYSCTL eth: bnxt: update header sizing defaults ...
2025-01-22Merge tag 'kthread-for-6.14-rc1' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks Pull kthread updates from Frederic Weisbecker: "Kthreads affinity follow either of 4 existing different patterns: 1) Per-CPU kthreads must stay affine to a single CPU and never execute relevant code on any other CPU. This is currently handled by smpboot code which takes care of CPU-hotplug operations. Affinity here is a correctness constraint. 2) Some kthreads _have_ to be affine to a specific set of CPUs and can't run anywhere else. The affinity is set through kthread_bind_mask() and the subsystem takes care by itself to handle CPU-hotplug operations. Affinity here is assumed to be a correctness constraint. 3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This is not a correctness constraint but merely a preference in terms of memory locality. kswapd and kcompactd both fall into this category. The affinity is set manually like for any other task and CPU-hotplug is supposed to be handled by the relevant subsystem so that the task is properly reaffined whenever a given CPU from the node comes up. Also care should be taken so that the node affinity doesn't cross isolated (nohz_full) cpumask boundaries. 4) Similar to the previous point except kthreads have a _preferred_ affinity different than a node. Both RCU boost kthreads and RCU exp kworkers fall into this category as they refer to "RCU nodes" from a distinctly distributed tree. Currently the preferred affinity patterns (3 and 4) have at least 4 identified users, with more or less success when it comes to handle CPU-hotplug operations and CPU isolation. Each of which do it in its own ad-hoc way. This is an infrastructure proposal to handle this with the following API changes: - kthread_create_on_node() automatically affines the created kthread to its target node unless it has been set as per-cpu or bound with kthread_bind[_mask]() before the first wake-up. - kthread_affine_preferred() is a new function that can be called right after kthread_create_on_node() to specify a preferred affinity different than the specified node. When the preferred affinity can't be applied because the possible targets are offline or isolated (nohz_full), the kthread is affine to the housekeeping CPUs (which means to all online CPUs most of the time or only the non-nohz_full CPUs when nohz_full= is set). kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been converted, along with a few old drivers. Summary of the changes: - Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu() - Introduce task_cpu_fallback_mask() that defines the default last resort affinity of a task to become nohz_full aware - Add some correctness check to ensure kthread_bind() is always called before the first kthread wake up. - Default affine kthread to its preferred node. - Convert kswapd / kcompactd and remove their halfway working ad-hoc affinity implementation - Implement kthreads preferred affinity - Unify kthread worker and kthread API's style - Convert RCU kthreads to the new API and remove the ad-hoc affinity implementation" * tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: kthread: modify kernel-doc function name to match code rcu: Use kthread preferred affinity for RCU exp kworkers treewide: Introduce kthread_run_worker[_on_cpu]() kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format rcu: Use kthread preferred affinity for RCU boost kthread: Implement preferred affinity mm: Create/affine kswapd to its preferred node mm: Create/affine kcompactd to its preferred node kthread: Default affine kthread to its preferred NUMA node kthread: Make sure kthread hasn't started while binding it sched,arm64: Handle CPU isolation on last resort fallback rq selection arm64: Exclude nohz_full CPUs from 32bits el0 support lib: test_objpool: Use kthread_run_on_cpu() kallsyms: Use kthread_run_on_cpu() soc/qman: test: Use kthread_run_on_cpu() arm/bL_switcher: Use kthread_run_on_cpu()
2025-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni17-120/+95
No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-21net: phylink: fix regression when binding a PHYRussell King (Oracle)1-1/+5
Some PHYs don't support clause 45 access, and return -EOPNOTSUPP from phy_modify_mmd(), which causes phylink_bringup_phy() to fail. Prevent this failure by allowing -EOPNOTSUPP to also mean success. Reported-by: Jiawen Wu <jiawenwu@trustnetic.com> Tested-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/E1tZp1a-001V62-DT@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-21net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanupRoger Quadros1-46/+77
Introduce am65_cpsw_create_txqs() and am65_cpsw_destroy_txqs() and use them. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-3-91a29c97e569@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-21net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanupRoger Quadros1-124/+119
Introduce am65_cpsw_create_rxqs() and am65_cpsw_destroy_rxqs() and use them. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-2-91a29c97e569@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-21net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error pathRoger Quadros1-23/+44
We are missing netif_napi_del() and am65_cpsw_nuss_free_tx/rx_chns() in error path when am65_cpsw_nuss_init_tx/rx_chns() is used anywhere other than at probe(). i.e. am65_cpsw_nuss_update_tx_rx_chns and am65_cpsw_nuss_resume() As reported, in am65_cpsw_nuss_update_tx_rx_chns(), if am65_cpsw_nuss_init_tx_chns() partially fails then devm_add_action(dev, am65_cpsw_nuss_free_tx_chns,..) is added but the cleanup via am65_cpsw_nuss_free_tx_chns() will not run. Same issue exists for am65_cpsw_nuss_init_tx/rx_chns() failures in am65_cpsw_nuss_resume() as well. This would otherwise require more instances of devm_add/remove_action and is clearly more of a distraction than any benefit. So, drop devm_add/remove_action for am65_cpsw_nuss_free_tx/rx_chns() and call am65_cpsw_nuss_free_tx/rx_chns() and netif_napi_del() where required. Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com> Closes: https://lore.kernel.org/all/m4rhkzcr7dlylxr54udyt6lal5s2q4krrvmyay6gzgzhcu4q2c@r34snfumzqxy/ Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-1-91a29c97e569@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 05:46:59 +0300