summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2016-08-23hv_netvsc: use kcallocStephen Hemminger1-2/+2
Better to use kcalloc rather than kzalloc and multiply for an array. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: make RSS hash key staticStephen Hemminger2-3/+2
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23hv_netvsc: fix rtnl locking in callbackStephen Hemminger1-4/+1
The function get_netvsc_net_device had conditional locking. This was unnecessary, incorrect, but harmless. It was unnecessary since the code is only called from netlink netdev event callback where RTNL is always acquired before the callbacks are run. It was incorrect because of use of trylock and then continuing. Fix by replacing with proper assertion. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'shared-for-4.9-1' of ↵David S. Miller29-1452/+984
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Saeed Mahameed says: ==================== Mellanox mlx5 core driver updates 2016-08-20 This series contains several low level and API updates for mlx5 core commands interface and mlx5_ifc.h to be shared as base code for net-next and rdma mlx5 4.9 submissions. From Saeed, ten patches that refactors old layouts of firmware commands which were manually generated before we introduced the mlx5_ifc, now all of the firmware commands inbox/outbox layouts moved to use mlx5_ifc and we remove the old manually generated structures. Plus to those ten patches, we add two patches that unifies mlx5 commands execution interface and improve the driver log messages in that area. From Hadar and Ilya, added the needed hardware bits and infrastructure for minimum inline headers setting and encap/decap commands and capabilities, needed for E-Switch offloads. This series applies on top latest net-next and rdma/master, and smoothly merges with the latest "Mellanox 100G mlx5 fixes 2016-08-16" series already applied into net branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ethernet: ti: cpsw: add ethtool channels supportIvan Khoronzhuk1-0/+180
These ops allow to control number of channels driver is allowed to work with at cpdma level. The maximum number of channels is 8 for rx and 8 for tx. In dual_emac mode the h/w channels are shared between two interfaces and changing number on one interface changes number of channels on another. How many channels are supported and enabled: $ ethtool -l ethX Change number of channels (up to 8) $ ethtool -L ethX rx 6 tx 6 Per-channel statistic: $ ethtool -S ethX Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ethernet: ti: davinci_cpdma: move cpdma channel struct macroses to ↵Ivan Khoronzhuk4-19/+18
internals Keep the driver internals in C file. Currently it's not required for drivers to know rx or tx a channel is, except create function. So correct "channel create" function, and use all channel struct macroses only for internal use. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ethernet: ti: cpsw: add multi queue supportIvan Khoronzhuk3-105/+210
The cpsw h/w supports up to 8 tx and 8 rx channels. This patch adds multi-queue support to the driver only, shaper configuration will be added with separate patch series. Default shaper mode, as before, priority mode, but with corrected priority order, 0 - is highest priority, 7 - lowest. The poll function handles all unprocessed channels, till all of them are free, beginning from hi priority channel. In dual_emac mode the channels are shared between two network devices, as it's with single-queue default mode. The statistic for every channel can be read with: $ ethtool -S ethX Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ethernet: ti: davinci_cpdma: fix locking while ctrl_stopIvan Khoronzhuk1-0/+2
The interrupts shouldn't be disabled while receiving skb, but while ctrl_stop, the channels are stopped and all remaining packets are handled with netif_receive_skb(), it can cause WARN_ONCE when ctrl is stopping while not all packets were handled with NAPIs: lock_irq_save cpdma_ctlr_stop cpdma_chan_top __cpdma_chan_free cpsw_rx_handler netif_receive_skb So, split locking while ctrl stop thus interrupts are still enabled while skbs handling. It can cause WARN_ONCE in rare cases when ctrl is stopping while not all packets were handled with NAPIs. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: ethernet: ti: davinci_cpdma: split descs num between all channelsIvan Khoronzhuk3-27/+83
Tx channels share same pool of descriptors. Thus one channel can block another if pool is emptied by one. But, the shaper should decide which channel is allowed to send packets. To avoid such impact of one channel on another, let every channel to have its own piece of pool. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: mv88e6xxx: Enable PORT_CONTROL_FORWARD_UNKNOWN for DSA-tagged CPU portsJamie Lentin1-2/+2
Without it, a mv88e6131 switch will not forward incoming unicast packets to the CPU port. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23dsa: mv88e6xxx: Delete ppu timer when removing moduleAndrew Lunn1-0/+13
The PPU method of accessing PHYs makes use of a timer. Make sure this timer is deleted before unloading the driver. Reported-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: dsa: mv88e6xxx: Fix support for DSA tagging for older switches.Andrew Lunn3-27/+31
Older chips only support DSA tagging on the CPU port. New devices support both DSA and EDSA. The driver needs to tell the core the tag protocol to use, and configure the switch for what is available. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: dsa: Allow the DSA driver to indicate the tag protocolAndrew Lunn4-4/+24
DSA drivers may drive different families of switches which need different tag protocol. Rather than hard code the tag protocol in the driver structure, have a callback for the DSA core to call. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23cxgb4: add support for tx max rate limitingRahul Lakkireddy3-0/+105
Implement set_tx_maxrate NDO to perform per queue tx rate limiting. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23cxgb4: add support for per queue tx schedulingRahul Lakkireddy3-0/+347
Add support to bind/unbind specified tx queues to/from scheduling classes. If a queue is already bound to a scheduling class, it is unbound first and then bound to a new specified class. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23cxgb4: add support for tx traffic scheduling classesRahul Lakkireddy7-5/+438
Add support to create tx traffic scheduling classes with specified scheduling parameters. Return an existing class if a match is found with same scheduling parameters. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23qed: Change locking scheme for VF channelYuval Mintz1-34/+90
Each VF employees a lock that's supposed to serialize its usage of the HW channel for communication with its PF, but the critical section is ill-defined: - VFs currently release the lock whenever the PF response arrives, prior to actually processing the reply buffer [which was also supposed to have been protected by same lock]. - The lock would be released on first response, ignoring the possibilty the sw flow isn't over [as might be the case of the acquisition flow]. As a result, the flow would run unprotected and would cause a double mutex release [as the additional message completion would release it while its actually already free]. Change the flow to have a dedicated function to be called at end of each flow and release the lock. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23qed*: Add support for VFs over legacy PFsYuval Mintz5-20/+106
Modern VFs can't run on old non-compatible as the fastpath HSI is slightly changed - but as the HSI is actually very close [basically, a single bit whose meaning flipped] this can be supported with small modifications. The major differences would be in: - Recognizing that VF is running on top of a legacy PF. - Returning some slowpath configurations that are no longer needed on top of modern PFs, but would be required when working over the legacy ones. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23qed: Prevent VFs from pause floodingYuval Mintz3-0/+6
Firmware would silently drop any control frame sent by VF to prevent a malicious VF from generating pause flood in the network. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23qed: Add support for legacy VFsYuval Mintz4-25/+104
The 8.10.x FW added support for forward compatability as well as 'future' backward compatibility, but only to those VFs that were using HSI which was 8.10.x based or newer. The latest firmware now supports backward compatibility for the older VFs based on 8.7.x and 8.8.x firmware as well. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: phy: Add missing of_node_put() in xgmiitorgmii_probe()Wei Yongjun1-0/+1
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. of_node_put() on it before exitting this function. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23mlx5/core: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-14/+3
* Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. * Return directly if this copy operation failed. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-22cxgb4: Simplify the return expressionWei Yongjun1-6/+1
Simplify the return expression. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21net: ethernet: renesas: ravb: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-7/+9
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21net: ethernet: renesas: ravb: use phydev from struct net_devicePhilippe Reynes2-18/+12
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21ixgbe: Add support for new X557 deviceDon Skidmore4-0/+11
This patch adds support for the new copper device X557. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21ixgbe: add device to MDIO speed settingDon Skidmore1-0/+2
This shouldn't matter as nothing should be attached still to be consisted control MDIO speed for these devices as well. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21ixgbe: Fix led interface for X557 devicesDon Skidmore2-2/+53
The X557 devices use a different interface to the LED for the port. This patch reflect that change. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21ixgbe: add support for geneve Rx offloadEmil Tantilov3-51/+134
Add geneve Rx offload support for x550em_a. The implementation follows the vxlan code with the lower 16 bits of the VXLANCTRL register holding the UDP port for VXLAN and the upper for Geneve. Disabled NFS filters in the RFCTL register which allows us to simplify the check for VXLAN and Geneve packets in ixgbe_rx_checksum(). Removed vxlan from the name of the callback functions and replaced it with udp_tunnel which is more in line with the new API. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21ixgbevf: fix incorrect MAC address on loadEmil Tantilov1-7/+14
The PF driver was only receiving the first 4 bytes of the MAC due to an incorrect size parameter for ixgbevf_write_msg_read_ack() in ixgbevf_set_rar_vf(). Correct the size by calculating it on a fly for all instances where we call ixgbevf_write_msg_read_ack() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21ixgbe: report correct media type for KR, KX and KX4 interfacesVeola Nazareth1-1/+3
ethtool reports backplane type interfaces as 1000/10000baseT link modes. This has been corrected to report the media as KR, KX or KX4 based on the backplane interface present. Signed-off-by: Veola Nazareth <veola.nazareth@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-21tun: Rename a jump label in update_filter()Markus Elfring1-3/+2
Adjust a jump target according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21tun: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-8/+3
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-21Merge branch '40GbE' of ↵David S. Miller13-231/+367
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-08-19 This series contains updates to i40e and i40evf only. Jake provides several patches, first just moves a function to co-locate the two functions related to configuring RSS via the admin queue, which should help in spotting bugs when comparing the two functions. Fixed an issue where commit e69ff813af35 ("i40e: rework the functions to configure RSS with similar parameters") missed checking whether the seed is NULL before using it and did not use the passed in *lut parameter. Fixed an issue where a previous refactor missed i40e_vsi_config_rss() and the values were being ignored, so checked for the fields and used them instead of default values. Lastly replaced calls to create_singlethread_workqueue() with alloc_workqueue() to provide more control over workqueue creation and allows explicit setting of the desired mode of operation. Mitch adds link speed to log messages and reports speed through ethtool. Carolyn refactors tail bump check and fixes byte ordering problems found when enabling this feature support. Adds support for HMC resources and profile commands for x722 firmware. Heinrich Schuchardt fixes format identifiers from %u to %d since the variable is defined as an integer. Catherine fixes an issue where there was a race condition between the completion of the client open and calls to the client ops, so ensured that client ops are not called until we are sure client is open. Harshitha makes sure that i40e_client_release() does not try to use an adapter pointer which may not be initialized, so make sure it is. Joe Perches fixes the use of the local macro XSTRINGIFY() to use __stringify() instead. Avinash corrects the mutex usage in client_subtask(). Fixed the RDMA client to open again after reset since it is closed during a PF reset. Jeff (me) clean up whitespace issues, where indentation was done inconsistently and with spaces versus tabs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20hv_netvsc: Implement batching of receive completionsHaiyang Zhang3-33/+160
The existing code uses busy retry when unable to send out receive completions due to full ring buffer. It also gives up retrying after limit is reached, and causes receive buffer slots not being recycled. This patch implements batching of receive completions. It also prevents dropping receive completions due to full ring buffer. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-20i40evf: Open RDMA Client after resetAvinash Dayanand1-0/+2
RDMA client is closed during the PF reset and needs to be opened again. Setting the flag so that RDMA client is opened in watchdog() function. Change-ID: I507b1e4cbd05528cdff68fd360ef3dcac8901263 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e/i40evf: Fix indentationJeff Kirsher2-92/+96
Several defines and code comments were indented with spaces instead of tabs, correct the issue to make indentation consistent. Change-ID: I0dc6bbb990ec4a9e856acc9ec526d876181f092c Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-08-20i40e: Correcting mutex usage in client codeAvinash Dayanand1-0/+1
Correcting the mutex usage, in client_subtask(), mutex_unlock has to be called just before client_del_instance() since this function opens and later closes the same mutex again. Similarly in client_is_registered removing the mutex since it closes the mutex twice. This is a patch suggested by RDMA team. Change-ID: Icce519c266e4221b8a2a72a15ba5bf01750e5852 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: Remove XSTRINGIFY macro definitions and usesJoe Perches2-7/+3
Use __stringify instead. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: Initialize pointer in client_release functionHarshitha Ramamurthy1-2/+2
The function i40e_client_release has a print statement that uses an adapter pointer which is not initialized if a previous if statement is not true. Hence, intialize it in the right place. Change-ID: I1afdaa2c46771ac42be56edcc41bb56b455b06c8 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: Check client is open before calling client opsCatherine Sullivan1-0/+25
We were having a race between the completion of the client open and calls to the client ops so don't call a client op unless we are sure the client is open. Testing Hints: Load IWARP driver and make sure it works as expected. Change-Id: I741f4f2aa4fcbfdad3e40dabbbb1b005856c396b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: use matching format identifiersHeinrich Schuchardt1-13/+13
i is defined as int but output as %u several times. Adjust the format identifiers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: Add support for HMC resource and profile for X722Carolyn Wyborny2-0/+42
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: Fix byte ordering in ARP NS code for X722Carolyn Wyborny2-34/+42
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: refactor tail_bump checkCarolyn Wyborny2-8/+4
This patch refactors tail bump check. Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40evf: report link speedMitch Williams3-12/+70
The PF driver tells us the link speed, so do something with that information. Add link speed to log messages, and report speed through ethtool. Change-Id: I279dc9540cc5203376406050a3e8d67e128d5882 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: use alloc_workqueue instead of create_singlethread_workqueueJacob Keller2-2/+4
Replace calls to create_singlethread_workqueue instead with alloc_workqueue as is style with other Intel drivers. This provides more control over workqueue creation, and allows explicit setting of the desired mode of operation. It also makes it more obvious that driver name constant is passed to a format "%s". Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: use configured RSS key and lookup table in i40e_vsi_config_rssJacob Keller1-4/+17
A previous refactor added support to store user configuration for VSIs, so that extra VSIs such as for VMDq can use this information when configuring. Unfortunately the i40e_vsi_config_rss function was missed in this refactor, and the values were being ignored. Fix this by checking for the fields and using those instead of always using the default values. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: fix broken i40e_config_rss_aq functionJacob Keller1-34/+23
X722 hardware requires using the admin queue to configure RSS. This function was previously re-written in commit e69ff813af35 ("i40e: rework the functions to configure RSS with similar parameters"). However, the previous refactor did not work correctly for a few reasons (a) it does not check whether seed is NULL before using it, resulting in a NULL pointer dereference [ 402.954721] BUG: unable to handle kernel NULL pointer dereference at (null) [ 402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.956402] PGD ad610067 PUD accc0067 PMD 0 [ 402.957235] Oops: 0000 [#1] SMP [ 402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_ broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv 6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_ pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel [ 402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ #20 [ 402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015 [ 402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000 [ 402.969046] RIP: 0010:[<ffffffffa0090ccf>] [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 402.970339] RSP: 0018:ffff8800b340ba90 EFLAGS: 00010246 [ 402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200 [ 402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000 [ 402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200 [ 402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000 [ 402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800 [ 402.978541] FS: 00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000 [ 402.980003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0 [ 402.983028] Stack: [ 402.984578] 0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000 [ 402.986187] 0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d [ 402.987844] ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000 [ 402.989509] Call Trace: [ 402.991200] [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e] [ 402.992924] [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e] [ 402.994684] [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300 [ 402.996446] [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100 [ 402.998203] [<ffffffff8136d102>] ? selinux_capable+0x12/0x20 [ 402.999968] [<ffffffff8136277b>] ? security_capable+0x4b/0x70 [ 403.001707] [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290 [ 403.003461] [<ffffffff816eab41>] dev_ioctl+0x191/0io630 [ 403.005186] [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80 [ 403.006942] [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20 [ 403.008691] [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50 [ 403.010421] [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0 [ 403.012173] [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0 [ 403.013911] [<ffffffff81262829>] SyS_ioctl+0x79/0x90 [ 403.015710] [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4 [ 403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48 [ 403.021454] RIP [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e] [ 403.023395] RSP <ffff8800b340ba90> [ 403.025271] CR2: 0000000000000000 [ 403.027169] ---[ end trace 64561b528cf61cf0 ]--- (b) it does not even bother to use the passed in *lut parameter which defines the requested lookup table. Instead it uses its own round robin table. Fix these issues by re-writing it to be similar to i40e_config_rss_reg and i40e_get_rss_aq. Fixes: e69ff813af35 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-20i40e: move i40e_vsi_config_rss below i40e_get_rss_aqJacob Keller1-27/+27
Move this function below the two functions related to configuring RSS via the admin queue. This helps co-locate the two functions, and made it easier to spot a bug in the first i40e_config_rss_aq function as compared to the i40e_get_rss_aq function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 09:50:55 +0300