summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-10-24rt2x00: usb: fix reset resumeStanislaw Gruszka3-0/+3
Patch fixes warnings like below happened on resume: WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34() Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0 interface) and then during resume we call usb_unbind_interface() -> ieee80211_unregister_hw() with sdata removed. Patch fixes problem by adding .reset_resume calback, hence we do not unbind usb device on resume. This callback can be the same as normal .resume callback, sice we do all needed initalization during interface start, which is performed on resume [ ieee80211_resume() -> ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ]. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=48041 Reported-by: David Herrmann <dh.herrmann@googlemail.com> Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24rtlwifi: pass rx setup error code to callerChristian Lamparter1-1/+1
If _rtl_usb_receive fails, the device is probably not ready. Hence the error code should be passed to the caller, so it can react accordingly and notify the user. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-24can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boardsStephane Grosjean1-2/+11
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23can: flexcan: disable bus error interrupts for the i.MX6qWolfgang Grandegger1-3/+16
This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang <jason77.wang@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() failsDotan Barak1-1/+4
Fixed the resource cleanup to act correctly and prevent a kernel oops when mlx4_QUERY_ADAPTER() fails. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23mlx4_core: Remove annoying debug messages from SR-IOV flowOr Gerlitz2-12/+0
These debug prints left behind by commits c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests"), 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") and 993c401e2079 ("mlx4_core: Add IB port-state machine and port mgmt event propagation") make it pretty hard to actually use the mlx4_core debug messages when running in SRIOV/IB mode -- for example, the module load sequence of a device with one VF yielded 631 debug prints, with 408 of them being from this set. Let's just remove them. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-23pch_gbe: don't reset MAC_RX on FIFO overflowVeaceslav Falico1-60/+6
Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: don't re-set RX_FIFO_ERR flag in napi_pollVeaceslav Falico1-13/+6
If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: create functions for MAC_RX {en,dis}ableVeaceslav Falico1-6/+20
Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22qla3xxx: Ensure request/response queue addr writes to the registersJoe Jin1-2/+7
Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22Merge branch 'for-davem' of ↵David S. Miller4-61/+50
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for the 3.7 stream. Dan Carpenter brings a fix for a simple signedness bug that could prevent the proper termination of a loop. Felix Fietkau found a few more places that need to use ieee80211_free_txskb for properly releasing SKBs used by mac80211. Franky Lin offers a pair of brcmfmac fixes, both fixing simple state reporting errors. Hante Meuleman corrects an error reporting case that wasn't handling all types of errors properly. Johan Hedberg offers a fix for an issue discovered at the Bluetooth UnPlug Fest. Gustavo says "the patch fixes a failure to pair with devices that support the LE Secure Connections feature." Johannes Berg sends an iwlwifi fix to handle a message type that is too large for the normal command mechanism. He also provides a mac80211 fix to use HT20 channels when HT40 channels are not permitted. Jouni Malinen offers a mac80211 fix for a masking error that was incorrectly marking some frames. Piotr Haber provides a fix to make sure bcma devices are unregistered properly. Stanislav Yakovlev gives us a fix for a panic in the ipw2200 driver. Stanislaw Gruszka sends a pair of fixes: one prevents a mismatch on connection states between cfg80211 and mac80211; the other prevents some frame corruption related to handling encryption. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22cxgb4: Remove unnecessary #ifdef conditionVipul Pandya3-24/+27
This patch also fixes the build failure caused due to removal of #ifdef CONFIG_CHELSIO_T4_OFFLOAD condition Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19Merge branch 'master' of ↵John W. Linville4-61/+50
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-18net: qmi_wwan: adding more ZTE devicesBjørn Mork1-0/+41
Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18phy: add AT803x driverMatus Ujhelyi3-0/+182
This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18usb/ipheth: Add iPhone 5 supportJay Purohit1-0/+5
I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16bnx2x: fix handling mf storage modesDmitry Kravkov2-4/+8
Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16vlan: fix bond/team enslave of vlan challenged slave/portJiri Pirko1-1/+1
In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16iwlwifi: fix 6000 series channel switch commandJohannes Berg1-15/+24
The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-15net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx()Stanislav Yakovlev1-1/+1
The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [<c152f90f>] error_code+0x67/0x6c [67607.676067] [<c142f831>] ? skb_put+0x91/0xa0 [67607.676067] [<f8cf5e5b>] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf5e5b>] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf899b>] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [<f8741c5a>] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [<c143d3e8>] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: fix end of loop check (signedness bug)Dan Carpenter1-2/+2
The problem here is that we loop until "remained_buf_len" is less than zero, but since it is unsigned, it never is. "remained_buf_len" has to be large enough to hold the value from "mgmt_ie_buf_len". That variable is type u32, but it only holds small values so I have changed to both variables to int. Also I removed the bogus initialization from "mgmt_ie_buf_len" so that GCC can detect if it is used unitialized. I moved the declaration of "remained_buf_len" closer to where it is used so it's easier to read. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: set dongle mode accordingly when interface upFranky Lin1-36/+2
The mode of WiFi dongle should be initialized in brcmf_cfg80211_up which get called when network interface is brought up. Otherwise brcmf_cfg80211_get_station would return error. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: use control channel in roamed status reportingFranky Lin1-6/+20
Channel reported in scan results passed to cfg80211 is control channel. But chanspec is reported while notifying cfg80211 about roamed update. Cfg80211 complains because it could not find the bss in the list. Report control channel while calling cfg80211_roamed. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: handle all exceptions as an error.Hante Meuleman1-1/+1
in brcmf_usb_probe_cb only return code ENOLINK was seen as an error. This is wrong, all error codes should be returned to usb subsystem. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-12mcs7830: Fix link state detectionOndrej Zary1-9/+21
The device had an undocumented "feature": it can provide a sequence of spurious link-down status data even if the link is up all the time. A sequence of 10 was seen so update the link state only after the device reports the same link state 20 times. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reported-by: Michael Leun <lkml20120218@newton.leun.net> Tested-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11usbnet: Support devices reporting idlenessOliver Neukum2-0/+21
Some device types support a form of power management in which the device suggests to the host that the device may be suspended now. Support for that is best located in usbnet. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11net/ethernet/jme: disable ASPMKevin Baradon1-0/+4
Based on patch from Matthew Garrett <mjg@redhat.com> (https://lkml.org/lkml/2011/11/11/168). http://driveragent.com/archive/30421/7-0-14 indicates that ASPM is disabled on the 250 and 260. Duplicate for sanity. Fixes random RX engine hangs I experienced with JMC250 on Clevo W270HU. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11kaweth: print correct debug ptrAlan Cox1-1/+1
We nowdays copy the buffer and free fw->data, so make the debug printk use the right thing. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11e1000e: Change wthresh to 1 to avoid possible Tx stallsHiroaki SHIMODA2-4/+4
This patch originated from Hiroaki SHIMODA but has been modified by Intel with some minor cleanups and additional commit log text. Denys Fedoryshchenko and others reported Tx stalls on e1000e with BQL enabled. Issue was root caused to hardware delays. They were introduced because some of the e1000e hardware with transmit writeback bursting enabled, waits until the driver does an explict flush OR there are WTHRESH descriptors to write back. Sometimes the delays in question were on the order of seconds, causing visible lag for ssh sessions and unacceptable tx completion latency, especially for BQL enabled kernels. To avoid possible Tx stalls, change WTHRESH back to 1. The current plan is to investigate a method for re-enabling WTHRESH while not harming BQL, but those patches will be later for net-next if they work. please enqueue for stable since v3.3 as this bug was introduced in commit 3f0cfa3bc11e7f00c9994e0f469cbc0e7da7b00c Author: Tom Herbert <therbert@google.com> Date: Mon Nov 28 16:33:16 2011 +0000 e1000e: Support for byte queue limits Changes to e1000e to use byte queue limits. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> CC: eric.dumazet@gmail.com CC: therbert@google.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11xen: netback: handle compound page fragments on transmit.Ian Campbell1-5/+35
An SKB paged fragment can consist of a compound page with order > 0. However the netchannel protocol deals only in PAGE_SIZE frames. Handle this in netbk_gop_frag_copy and xen_netbk_count_skb_slots by iterating over the frames which make up the page. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: fix oops when give unknown ifindexstephen hemminger1-6/+10
If vxlan is created and the ifindex is passed; there are two cases which are incorrectly handled by the existing code. The ifindex could be zero (i.e. no device) or there could be no device with that ifindex. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: fix receive checksum handlingstephen hemminger1-2/+1
Vxlan was trying to use postpull_rcsum to allow receive checksum offload to work on drivers using CHECKSUM_COMPLETE method. But this doesn't work correctly. Just force full receive checksum on received packet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: add additional headroomstephen hemminger1-0/+1
Tell upper layer protocols to allocate skb with additional headroom. This avoids allocation and copy in local packet sends. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: allow configuring port rangestephen hemminger1-5/+57
VXLAN bases source UDP port based on flow to help the receiver to be able to load balance based on outer header flow. This patch restricts the port range to the normal UDP local ports, and allows overriding via configuration. It also uses jhash of Ethernet header when looking at flows with out know L3 header. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: associate with tunnel socket on transmitstephen hemminger1-0/+19
When tunnelling a skb, associate it with the tunnel socket. This allows parameters set on tunnel socket (like multicast loop flag), to be picked up by ip_output. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: use ip_route_outputstephen hemminger1-4/+8
Select source address for VXLAN packet based on route destination and don't lie to route code. VXLAN is not GRE. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: fix byte order in hash functionstephen hemminger1-2/+2
Shift was wrong direction causing packets to hash based on other parts of the ethernet header, not the address. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11vxlan: minor output refactoringstephen hemminger1-11/+20
Move code to find destination to a small function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10Merge tag 'master-2012-10-08' of ↵David S. Miller16-92/+136
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is a batch of fixes intended for 3.7... Amitkumar Karwar provides a couple of mwifiex fixes to correctly report some reason codes for certain connection failures. He also provides a fix to cleanup after a scanning failure. Bing Zhao rounds that out with another mwifiex scanning fix. Daniel Golle gives us a fix for a copy/paste error in rt2x00. Felix Fietkau brings a couple of ath9k fixes related to suspend/resume, and a couple of fixes to prevent memory leaks in ath9k and mac80211. Ronald Wahl sends a carl9170 fix for a sleep in softirq context. Thomas Pedersen reorders some code to prevent drv_get_tsf from being called while holding a spinlock, now that it can sleep. Finally, Wei Yongjun prevents a NULL pointer dereference in the ath5k driver. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09netdev/phy: Prototype of_mdio_find_bus()Mark Brown1-0/+1
Ensure that of_mdio_find_bus() matches the prototype in the header (and stop sparse complaining) by including the header with the prototype. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09farsync: fix support for over 30 cardsDan Carpenter1-1/+1
We're trying to fill a 64 bit bitmap but only the lower 30 shifts work because the shift wraps around. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09be2net: Remove code that stops further access to BE NIC based on UE bitsAjit Khaparde1-2/+5
On certain platforms, BE hardware could falsely indicate UE. For BE family of NICs, do not set hw_error based on the UE bits. If there was a real fatal error, the corresponding h/w block will automatically go offline and stop traffic. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09pch_gbe: Fix build error by selecting all the possible dependencies.Haicheng Li1-0/+3
Fengguang reported a kernel build failure as following: drivers/built-in.o: In function `pch_gbe_ioctl': pch_gbe_main.c:(.text+0x510370): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x510393): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x5103b3): undefined reference to `pch_ch_control_write' ... It's a regression by commit da1586461. The root cause is that the CONFIG_PPS is not set there, consequently CONFIG_PTP_1588_CLOCK can not be set anyway, which finally causes ptp_pch and pch_gbe_main build failures. As David prefers to use *select* to fix such module co-dependency issues, this patch explicitly selects all the possible dependencies of PCH_PTP. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Haicheng Li <haicheng.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller3-134/+448
Pulled mainline in order to get the UAPI infrastructure already merged before I pull in David Howells's UAPI trees for networking. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09e1000e: add device IDs for i218Bruce Allan2-0/+4
i218 is the next-generation LOM that will be available on systems with the Lynx Point LP Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support of those devices. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-09ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangsAlexander Duyck2-2/+2
This change limits the PF/VF driver to 9.5K max jumbo frame size in order prevent a possible Tx hang in the adapter when sending frames between pools. All of the parts in ixgbe support a maximum frame of 15.5K for standard traffic, however with SR-IOV or DCB enabled they should be limiting the MTU size to 9.5K. Instead of adding extra checks which would have to change the MTU when we go into or out of these modes it is preferred to just use a standard 9.5K MTU limit for all modes so that this extra overhead can be avoided. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-09ixgbevf: Set the netdev number of Tx queuesGreg Rose1-0/+7
The driver was not setting the number of real Tx queues in the net_device structure. This caused some serious issues such as Tx hangs and extremely poor performance with some usages of the driver. The issue is best observed by running: iperf -c <host> -P <n> Where n is greater than one. The greater the value of n the more likely the problem is to show up. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-134/+446
Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
2012-10-09net: fix typo in freescale/ucc_geth.cMichael Neuling1-1/+1
The following patch: acb600d net: remove skb recycling added dev_free_skb() to drivers/net/ethernet/freescale/ucc_geth.c This is a typo and should be dev_kfree_skb(). This fixes this. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09vxlan: fix more sparse warningsStephen Hemminger1-2/+2
Fix a couple harmless sparse warnings reported by Fengguang Wu. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>