summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2015-10-11bnx2x: Prevent UDP 4-tuple configurations on older adaptersYuval Mintz1-0/+7
Configuring 4-tuple RSS hsahing for UDP [E.g., by using `ethtool -N <interface> rx-flow-hash udp4 sdfn'] on a 57710/57711 adapter would cause it to assert as HW does not support such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11mlxsw: Fix bug in __mlxsw_item_bit_array_offsetIdo Schimmel1-1/+3
When calculating the shift needed in order to access a bit array element in a byte, we should multiply the index by the element size and not assume it is fixed at 2-bits. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11mlxsw: switchx2: changing order of exit fallbacksElad Raz1-1/+1
Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5e: Disable VLAN filter in promiscuous modeAchiad Shochat1-2/+14
When the device was set to promiscuous mode, we didn't disable VLAN filtering, which is wrong behaviour, fix that. Now when the device is set to promiscuous mode RX packets sent over any VLAN (or no VLAN tag at all) will be accepted. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx5: Fix typo in mlx5_query_port_pvlcJiri Pirko1-1/+1
We used the wrong register name for querying the PVLC register Fixes: a124d13ef59e ('net/mlx5_core: Add more query port helpers') Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09net/mlx4_core: Avoid failing the interrupts testCarol L Soto1-0/+4
Test interrupts fails if not all completion vectors called request_irq. This case happens if only mlx4_en is loaded and we have more completion vectors than rx rings. Fixes: c66fa19c405a ('net/mlx4: Add EQ pool') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net/mlx4: Remove shared_ports variable at mlx4_enable_msi_xCarol L Soto1-8/+2
If we get MAX_MSIX interrupts would like to have each receive ring with his own msix interrupt line. Do not need the shared_ports variable at mlx4_enable_msix Fixes: 9293267a3e2a ('net/mlx4_core: Capping number of requested MSIXs to MAX_MSIX') Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: mdio-octeon: Drop obsolete Kconfig adviceJean Delvare1-2/+0
"Y" was the right answer for MDIO_OCTEON when this option was only available on CAVIUM_OCTEON_SOC. But now that the option is visible on all (64-bit) systems, this piece of advice no longer makes sense. This helper module is selected automatically by drivers which need it anyway. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: a6d6786452 ("net: mdio-octeon: Modify driver to work on both ThunderX and Octeon") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08mlxsw: fix warnings for big-endian 32-bit dma_addr_tArnd Bergmann1-4/+4
The recently added mlxsw driver produces warnings in ARM allmodconfig: drivers/net/ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cmd_exec': drivers/net/ethernet/mellanox/mlxsw/pci.c:1585:59: warning: right shift count >= width of type [-Wshift-count-overflow] linux/byteorder/big_endian.h:38:51: note: in definition of macro '__cpu_to_be32' drivers/net/ethernet/mellanox/mlxsw/pci.c:76:2: note: in expansion of macro 'iowrite32be' This uses upper_32_bits() to extract the bits while avoiding that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Fixes: eda6500a987a "mlxsw: Add PCI bus implementation" Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07i40e/i40evf: set AQ count after memory allocationMitch Williams2-4/+4
The standard way to check if the AQ is enabled is to look at the count field. So we should only set this field after we have successfully allocated memory. To do otherwise is to incite panic among the populace. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge tag 'iwlwifi-for-kalle-2015-10-05' of ↵Kalle Valo8-20/+27
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * some fixes for PN key programming when entering D3; * fix for CSA when the AP is stopped during a channel switch; * fix firmware name for 3160 devices; * add some new PCI IDs for 7265 devices; * fix CT-kill entry; * fix kernel panic when a sysassert occurs in the init ucode flow;
2015-10-06amd-xgbe: Check for successful buffer allocation before useTom Lendacky1-0/+3
The kasprintf function can return NULL if the allocation fails. Check for successful allocation before attempting to use the returned buffer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05i40e: fix offload of GRE tunnelsJesse Brandeburg1-0/+2
The driver still was not offloading TSO on GRE tunnels because it forgot to set the GSO_GRE flag, causing lots of retransmits. This fixes generic GRE traffic (like a tunnel added like below) whereas before it would get 1Gb/s or less, now on a 10G adapter it gets 8.7Gb/s. ip ad ad 11.1.0.2/24 dev ens2f0 ip l set ens2f0 up ip link add gre2 type gretap remote 11.1.0.1 local 11.1.0.2 dev ens2f0 ip l set gre2 up ip ad ad 192.168.124.2/24 dev gre2 ping 192.168.124.1 netperf -H 192.168.124.1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge tag 'wireless-drivers-for-davem-2015-10-01' of ↵David S. Miller4-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== pull-request: wireless-drivers 2015-10-01 ath9k: * declare required extra tx headroom ath10k: * fix DMA related firmware crashes on multiple devices rt2800usb: * add usb ID 1b75:3070 for Airlive WT-2000USB b43: * probe bcma core (device) rev 0x15 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05iwlwifi: mvm: flush fw_dump_wk when mvm fails to startAndrei Otcheretianski1-0/+1
FW dump may be triggered when running init ucode, for example due to a sysassert. In this case fw_dump_wk may run after mvm is freed, resulting in a kernel panic. Fix it by flushing the work. Fixes: 01b988a708af ("iwlwifi: mvm: allow to collect debug data when restart is disabled") Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: mvm: init card correctly on ctkill exit checkArik Nemtsov2-2/+7
During the CT-kill exit flow, the card is powered up and partially initialized to check if the temperature is already low enough. Unfortunately the init bails early because the CT-kill flag is set. Make the code bail early only for HW RF-kill, as was intended by the author. CT-kill is self-imposed and is not really RF-kill. Fixes: 31b8b343e019 ("iwlwifi: fix RFkill while calibrating") Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: pci: add a few more PCI subvendor IDs for the 7265 seriesLuca Coelho1-0/+5
Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B device ID. Cc: <stable@vger.kernerl.org> [3.13+] Reported-by: Jeremy <jeremy.bomkamp@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: fix firmware filename for 3160Johannes Berg1-1/+1
The MODULE_FIRMWARE() for 3160 should be using the 7260 version as it's done in the device configuration struct instead of referencing IWL3160_UCODE_API_OK which doesn't even exist. Cc: <stable@vger.kernel.org> [3.8+] Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: mvm: clear csa countdown when AP is stoppedAvraham Stern1-0/+1
The csa_countdown flag was not cleared when the AP is stopped. As a result, if the AP was stopped after csa_countdown had started, all the folowing channel switch commands would fail. Fix that by clearing the csa_countdown flag when the AP is stopped. Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: mvm: fix D3 firmware PN programmingJohannes Berg1-6/+6
The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: dvm: fix D3 firmware PN programmingJohannes Berg1-1/+1
The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05iwlwifi: mvm: fix D3 CCMP TX PN assignmentJohannes Berg1-10/+5
When going into/coming out of D3, the TX PN must be programmed into and restored from the firmware respectively. The restore was broken due to my previous commit to move PN assignment into the driver. Sending the PN to the firmware still worked since we now use the counter that's shared with mac80211, but accessing it through the mac80211 API makes no sense now. Fix this by reading/writing the counter directly. This actually simplifies the code since we don't need to round-trip through the key_seq structure. Fixes: ca8c0f4bede6 ("iwlwifi: mvm: move TX PN assignment for CCMP to the driver") Cc: <stable@vger.kernel.org> [4.1+] Reported-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2015-10-05net: lpc_eth: fix warnings caused by enabling unprepared clockVladimir Zapolskiy1-7/+6
If common clock framework is configured, the driver generates warnings, which are fixed by this change: WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c) [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20) [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: usb: asix: Fix crash on skb alloc failureDavid B. Robins1-1/+3
If asix_rx_fixup_internal() fails to allocate rx->ax_skb, it will return but not clear rx->size. rx points to driver private data. A later call assumes that nonzero size means ax_skb was allocated and passes a null ax_skb to skb_put. Changed allocation failure return to clear size first. Found testing board with AX88772B devices. Signed-off-by: David B. Robins <linux@davidrobins.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge tag 'linux-can-fixes-for-4.3-20150930' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-09-30 this is a pull request of a single patch for 4.3. The patch is by Stephane Grosjean and add support for the peak OEM PCI card to the peak_pci driver by adding its device ID. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: fix potential memory leak in xgbe-debugfsGeliang Tang1-0/+1
Added kfree() to avoid the memory leak when debugfs_create_dir() fails. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ppp: don't override sk->sk_state in pppoe_flush_dev()Guillaume Nault1-1/+0
Since commit 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"), pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the following oops: [ 570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0 [ 570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0 [ 570.144601] Oops: 0000 [#1] SMP [ 570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio [ 570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1 [ 570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000 [ 570.144601] RIP: 0010:[<ffffffffa018c701>] [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP: 0018:ffff880036b63e08 EFLAGS: 00010202 [ 570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206 [ 570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20 [ 570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000 [ 570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780 [ 570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0 [ 570.144601] FS: 00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000 [ 570.144601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0 [ 570.144601] Stack: [ 570.144601] ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0 [ 570.144601] ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008 [ 570.144601] ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5 [ 570.144601] Call Trace: [ 570.144601] [<ffffffff812caabe>] sock_release+0x1a/0x75 [ 570.144601] [<ffffffff812cabad>] sock_close+0xd/0x11 [ 570.144601] [<ffffffff811347f5>] __fput+0xff/0x1a5 [ 570.144601] [<ffffffff811348cb>] ____fput+0x9/0xb [ 570.144601] [<ffffffff81056682>] task_work_run+0x66/0x90 [ 570.144601] [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7 [ 570.144601] [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b [ 570.144601] [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f [ 570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00 [ 570.144601] RIP [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP <ffff880036b63e08> [ 570.144601] CR2: 00000000000004e0 [ 570.200518] ---[ end trace 46956baf17349563 ]--- pppoe_flush_dev() has no reason to override sk->sk_state with PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to PPPOX_DEAD, which is the correct state given that sk is unbound and po->pppoe_dev is NULL. Fixes: 2b018d57ff18 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Tested-by: Oleksii Berezhniak <core@irc.lg.ua> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03rtlwifi: rtl8821ae: Fix system lockups on bootLarry Finger4-0/+27
In commit 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers"), the code that cleared all interrupt enable bits before setting them was removed for all PCI drivers. This fixed an issue that caused TX to be blocked for 3-5 seconds. On some RTL8821AE units, this change causes soft lockups to occur on boot. For that reason, the portion of the earlier commit that applied to rtl8821ae is reverted. Kernels 4.1 and newer are affected. See http://marc.info/?l=linux-wireless&m=144373370103285&w=2 and https://bugzilla.opensuse.org/show_bug.cgi?id=944978 for two cases where this regression affected user systems. Note that this bug does not appear on any of the developer's setups. For those users whose systems are affected by the TX blockage, but do not lock up on boot, a module parameter is added to disable the interrupt clear Fixes: 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.1+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds9-15/+38
Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
2015-10-01Merge tag 'for-linus' of ↵Linus Torvalds1-22/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - Fixes for mlx5 related issues - Fixes for ipoib multicast handling * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: increase the max mcast backlog queue IB/ipoib: Make sendonly multicast joins create the mcast group IB/ipoib: Expire sendonly multicast joins IB/mlx5: Remove pa_lkey usages IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY IB/iser: Add module parameter for always register memory xprtrdma: Replace global lkey with lkey local to PD
2015-09-30can: peak_pci: add unused device id. in devices tableStephane Grosjean1-0/+1
While new PEAK_PCIE_OEM_ID has been defined since 3.17, no corresponding entry has been added in the peak_pci_tbl[] of the peak_pci CAN driver. This patch enables now users of the PCAN-PCI Express OEM card to run the peak_pci driver too. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-09-30net/mlx4: Handle return codes in mlx4_qp_attach_commonRobb Manes1-3/+4
Both new_steering_entry() and existing_steering_entry() return values based on their success or failure, but currently they fall through silently. This can make troubleshooting difficult, as we were unable to tell which one of these two functions returned errors or specifically what code was returned. This patch remedies that situation by passing the return codes to err, which is returned by mlx4_qp_attach_common() itself. This also addresses a leak in the call to mlx4_bitmap_free() as well. Signed-off-by: Robb Manes <rmanes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30dsa: mv88e6xxx: Enable forwarding for unknown to the CPU portAndrew Lunn1-0/+2
Frames destined to an unknown address must be forwarded to the CPU port. Otherwise incoming ARP, dhcp leases, etc, do not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29bna: fix error handlingAndrzej Hajda1-6/+7
Several functions can return negative value in case of error, so their return type should be fixed as well as type of variables to which this value is assigned. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net/ibm/emac: bump version numbers for correct work with ethtoolIvan Mikhaylov1-3/+3
The size of the MAC register dump used to be the size specified by the reg property in the device tree. Userland has no good way of finding out that size, and it was not specified consistently for each MAC type, so ethtool would end up printing junk at the end of the register dump if the device tree didn't match the size it assumed. Using the new version numbers indicates unambiguously that the size of the MAC register dump is dependent only on the MAC type. Fixes: 5369c71f7ca2 ("net/ibm/emac: fix size of emac dump memory areas") Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29i40e/i40evf: check for stopped admin queueMitch Williams2-0/+18
It's possible that while we are waiting for the spinlock, another entity (that owns the spinlock) has shut down the admin queue. If we then attempt to use the queue, we will panic. Add a check for this condition on the receive side. This matches an existing check on the send queue side. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29i40e: fix VLAN inside VXLANJesse Brandeburg1-1/+2
Previously to this patch, the hardware was removing VLAN tags from the inner header of VXLAN packets. The hardware configuration can be changed to leave the packet alone since that is what the linux stack expects for this type of VLAN in VXLAN packet. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-27r8169: fix handling rtl_readphy resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-27net: hisilicon: fix handling platform_get_irq resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26ath10k: fix DMA related firmware crashes on multiple devicesFelix Fietkau1-2/+2
Some platforms really don't like DMA bursts of 256 bytes, and this causes the firmware to crash when sending beacons. Also, changing this based on the firmware version does not seem to make much sense, so use 128 bytes for all versions. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-26b43: probe bcma core (device) rev 0x15Rafał Miłecki1-0/+1
OpenWrt user reported b43 doesn't probe wireless core on SoC BCM5356A1: [ 0.000000] bcma: bus0: Found chip with id 0x5356, rev 0x01 and package 0x04 it is because this chip uses different 802.11 core revison than others: [ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x15, class 0x0) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-26rt2800usb: add usb ID 1b75:3070 for Airlive WT-2000USBStanislaw Gruszka1-0/+1
Brand: Airlive (Ovislink Corp.) Name: Turbo-G USB Adaptor Model: WT-2000USB USB ID: 1b75:3070 Reported-and-tested-by: Michael Coates <michlinux@hotmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-26ath9k: declare required extra tx headroomFelix Fietkau1-0/+1
ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds51-248/+842
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-26net: update docbook comment for __mdiobus_register()Russell King1-2/+5
Update the docbook comment for __mdiobus_register() to include the new module owner argument. This resolves a warning found by the 0-day builder. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25ppp: fix lockdep splat in ppp_dev_uninit()Guillaume Nault1-1/+3
ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection. ppp_create_interface() must then lock these mutexes in that same order to avoid possible deadlock. [ 120.880011] ====================================================== [ 120.880011] [ INFO: possible circular locking dependency detected ] [ 120.880011] 4.2.0 #1 Not tainted [ 120.880011] ------------------------------------------------------- [ 120.880011] ppp-apitest/15827 is trying to acquire lock: [ 120.880011] (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [ 120.880011] but task is already holding lock: [ 120.880011] (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [ 120.880011] which lock already depends on the new lock. [ 120.880011] [ 120.880011] [ 120.880011] the existing dependency chain (in reverse order) is: [ 120.880011] [ 120.880011] -> #1 (rtnl_mutex){+.+.+.}: [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffff812e4255>] rtnl_lock+0x12/0x14 [ 120.880011] [<ffffffff812d9d94>] register_netdev+0x11/0x27 [ 120.880011] [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic] [ 120.880011] [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532 [ 120.880011] [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d [ 120.880011] [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 120.880011] [ 120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}: [ 120.880011] [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76 [ 120.880011] [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e [ 120.880011] [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341 [ 120.880011] [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252 [ 120.880011] [<ffffffff812d5381>] rollback_registered+0x29/0x38 [ 120.880011] [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77 [ 120.880011] [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic] [ 120.880011] [<ffffffff8112d9f6>] __fput+0xec/0x192 [ 120.880011] [<ffffffff8112dacc>] ____fput+0x9/0xb [ 120.880011] [<ffffffff8105447a>] task_work_run+0x66/0x80 [ 120.880011] [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7 [ 120.880011] [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104 [ 120.880011] [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f [ 120.880011] [ 120.880011] other info that might help us debug this: [ 120.880011] [ 120.880011] Possible unsafe locking scenario: [ 120.880011] [ 120.880011] CPU0 CPU1 [ 120.880011] ---- ---- [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] [ 120.880011] *** DEADLOCK *** Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selectedSudip Mukherjee1-1/+1
The builds of allmodconfig of avr32 is failing with: drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI is not defined and CONFIG_GENERIC_PCI_IOMAP is defined. Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both are not defined. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25phy: marvell: add link partner advertised modesRussell King1-0/+9
Read the standard link partner advertisment registers and store it in phydev->lp_advertising, so ethtool can report this information to userspace via ethtool. Zero it as per genphy if autonegotiation is disabled. Tested with a Marvell 88E1512 PHY. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEYSagi Grimberg1-22/+0
Commit 96249d70dd70 ("IB/core: Guarantee that a local_dma_lkey is available") allows ULPs that make use of the local dma key to keep working as before by allocating a DMA MR with local permissions and converted these consumers to use the MR associated with the PD rather then device->local_dma_lkey. ConnectIB has some known issues with memory registration using the local_dma_lkey (SEND, RDMA, RECV seems to work ok). Thus don't expose support for it (remove device->local_dma_lkey setting), and take advantage of the above commit such that no regression is introduced to working systems. The local_dma_lkey support will be restored in CX4 depending on FW capability query. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-25phy: add phy_device_remove()Russell King3-7/+31
Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 23:49:02 +0300