| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On some boards there is no eeprom to hold the nvram, in this case instead
a board specific nvram is loaded from /lib/firmware. On most boards the
macaddr=... setting in the /lib/firmware nvram file is ignored because
the wifi/bt chip has a unique MAC programmed into the chip itself.
But in some cases the actual MAC from the /lib/firmware nvram file gets
used, leading to MAC conflicts.
The MAC addresses in the troublesome nvram files seem to all come from
the same nvram file template, so we can detect this by checking for
the template nvram file MAC.
Detect that the default MAC address is being used and replace it
with a random MAC address to avoid MAC address conflicts.
Note that udev will detect this is a random MAC based on
/sys/class/net/wlan0/addr_assign_type and then replace this with
a MAC based on hashing the netdev-name + the machine-id. So that
the MAC address is both guaranteed to be unique per machine while
it is still the same/persistent at each boot (assuming the
default Link.MACAddressPolicy=persistent udev setting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-2-hdegoede@redhat.com
|
|
Add a little helper to send "cur_etheraddr" commands to the interface
and to handle the error reporting of it in a single place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-1-hdegoede@redhat.com
|
|
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.
Some other functions not directly called by the .suspend/.resume
callbacks, but still related to PM were also taken outside #ifdef
guards.
The advantage is then that these functions are now always compiled
independently of any Kconfig option, and thanks to that bugs and
regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220627193701.31074-1-paul@crapouillou.net
|
|
The for loop in brcmf_of_probe() would ideally end with something like
"i <= strlen(board_type)" instead of "i < board_type[i]". But
fortunately, the two are equivalent.
Anyway, it's simpler to use strreplace() instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YqrhsKcjEA7B2pC4@kili
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: PPPoE offload support
Marcin Szycik says:
Add support for dissecting PPPoE and PPP-specific fields in flow dissector:
PPPoE session id and PPP protocol type. Add support for those fields in
tc-flower and support offloading PPPoE. Finally, add support for hardware
offload of PPPoE packets in switchdev mode in ice driver.
Example filter:
tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \
1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR
Changes in iproute2 are required to use the new fields (will be submitted
soon).
ICE COMMS DDP package is required to create a filter in ice.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for PPPoE hardware offload
flow_offload: Introduce flow_match_pppoe
net/sched: flower: Add PPPoE filter
flow_dissector: Add PPPoE dissectors
====================
Link: https://lore.kernel.org/r/20220726203133.2171332-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, userland has no method to query which timestamping features
are supported by the peak_usb driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way to add hardware timestamp support is to implement
ethtool_ops::get_ts_info() in order to advertise the timestamping
capabilities and to implement net_device_ops::ndo_eth_ioctl() as
requested in [1]. Currently, the driver only supports hardware RX
timestamps [2] but not hardware TX. For this reason, the generic
function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts()
can not be reused and instead this patch adds pcan_get_ts_info() and
peak_eth_ioctl().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
[2] https://lore.kernel.org/linux-can/20220727080634.l6uttnbrmwbabh3o@pengutronix.de/
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-15-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, userland has no method to query which timestamping features
are supported by the peak_canfd driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way to add hardware timestamp support is to implement
ethtool_ops::get_ts_info() in order to advertise the timestamping
capabilities and to implement net_device_ops::ndo_eth_ioctl() as
requested in [1]. Currently, the driver only supports hardware RX
timestamps [2] but not hardware TX. For this reason, the generic
function can_ethtool_op_get_ts_info_hwts() and can_eth_ioctl_hwts()
can not be reused and instead this patch adds peak_get_ts_info() and
peak_eth_ioctl().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
[2] https://lore.kernel.org/linux-can/20220727084257.brcbbf7lksoeekbr@pengutronix.de/
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-14-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, userland has no method to query which timestamping features
are supported by the kvaser_usb driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-13-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, userland has no method to query which timestamping features
are supported by the kvaser_pciefd driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-12-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, userland has no method to query which timestamping features
are supported by the etas_es58x driver (aside maybe of getting RX
messages and observe whether or not hardware timestamps stay at zero).
The canonical way for a network driver to advertise what kind of
timestamping is supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, userland has no methods to query which timestamping
features are supported by the mcp251xfd driver (aside maybe of getting
RX messages and observe whether or not hardware timestamps stay at
zero).
The canonical way for a network driver to advertise what kind of
timestamping it supports is to implement
ethtool_ops::get_ts_info(). Here, we use the CAN specific
can_ethtool_op_get_ts_info_hwts() function to achieve this.
In addition, the driver currently does not support the hardware
timestamps ioctls. According to [1], SIOCSHWTSTAMP is "must" and
SIOCGHWTSTAMP is "should". This patch fills up that gap by
implementing net_device_ops::ndo_eth_ioctl() using the CAN specific
function can_eth_ioctl_hwts().
[1] kernel doc Timestamping, section 3.1: "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Tools based on libpcap (such as tcpdump) expect the SIOCSHWTSTAMP
ioctl call to be supported. This is also specified in the kernel doc
[1]. The purpose of this ioctl is to toggle the hardware timestamps.
Currently, CAN devices which support hardware timestamping have those
always activated. can_eth_ioctl_hwts() is a dumb function that will
always succeed when requested to set tx_type to HWTSTAMP_TX_ON or
rx_filter to HWTSTAMP_FILTER_ALL.
[1] Kernel doc: Timestamping, section 3.1 "Hardware Timestamping
Implementation: Device Drivers"
Link: https://docs.kernel.org/networking/timestamping.html#hardware-timestamping-implementation-device-drivers
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-9-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add function can_ethtool_op_get_ts_info_hwts(). This function will be
used by CAN devices with hardware TX/RX timestamping support to
implement ethtool_ops::get_ts_info. This function does not offer
support to activate/deactivate hardware timestamps at device level nor
support the filter options (which is currently the case for all CAN
devices with hardware timestamping support).
The fact that hardware timestamp can not be deactivated at hardware
level does not impact the userland. As long as the user do not set
SO_TIMESTAMPING using a setsockopt() or ioctl(), the kernel will not
emit TX timestamps (RX timestamps will still be reproted as it is the
case currently).
Drivers which need more fine grained control remains free to implement
their own function, but we foresee that the generic function
introduced here will be sufficient for the majority.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Because of the loopback feature of socket CAN, hardware TX timestamps
are nothing else than the hardware RX timespamp of the corresponding
loopback packet. This patch simply reuses the hardware RX timestamp.
The rationale to clone this timestamp value is that existing tools
which rely of libpcap (such as tcpdump) expect support for both TX and
RX hardware timestamps in order to activate the feature (i.e. no
granular control to activate either of TX or RX hardware timestamps).
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Currently, some CAN drivers support hardware timestamping, some do
not. But userland has no method to query which features are supported
(aside maybe of getting RX messages and observe whether or not
hardware timestamps stay at zero).
The canonical way for a network driver to advertised what kind of
timestamping it supports is to implement ethtool_ops::get_ts_info().
This patch only targets the CAN drivers which *do not* support
hardware timestamping. For each of those CAN drivers, implement the
get_ts_info() using the generic ethtool_op_get_ts_info().
This way, userland can do:
| $ ethtool --show-time-stamping canX
to confirm the device timestamping capacities.
N.B. the drivers which support hardware timestamping will be migrated
in separate patches.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr
[mkl: mscan: add missing mscan_ethtool_ops]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This reverts commit 35d099da41967f114c6472b838e12014706c26e7, reversing
changes made to 58d8bcd47ecc55f1ab92320fe36c31ff4d83cc0c.
I wrongly applied that to the net-next tree instead of the intended
target tree (net). Reverting it on net-next.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
TX timestamps were added to the can_put_echo_skb() function of can_dev
modules in [1]. However, vcan and vxcan do not rely on that function
and as such do not offer TX timestamping.
While it could be arguable whether TX timestamps are really needed for
virtual interfaces, we prefer to still add it so that all CAN drivers,
without exception, support the software TX timestamps.
Add a call to skb_tx_timestamp() in the vcan_tx() and vxcan_xmit()
functions so that the modules now support TX software timestamps.
[1] commit 741b91f1b0ea ("can: dev: can_put_echo_skb(): add software
tx timestamps")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
TX timestamps were added to the can_put_echo_skb() function of can_dev
modules in [1]. However, slcan does not rely on that function and as
such does not offer TX timestamping.
Add a call to skb_tx_timestamp() in the slc_xmit() function so that
the module now supports TX software timestamps.
[1] commit 741b91f1b0ea ("can: dev: can_put_echo_skb(): add software
tx timestamps")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf
CC: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
TX timestamps were added to the can_put_echo_skb() function of can_dev
modules in [1]. However, janz-ican3 does not rely on that function but
instead implements its own echo_skb logic. As such it does not offer
TX timestamping.
Add a call to skb_tx_timestamp() in the ican3_put_echo_skb() function
so that the module now supports TX software timestamps.
[1] commit 741b91f1b0ea ("can: dev: can_put_echo_skb(): add software
tx timestamps")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
TX timestamps were added to the can_put_echo_skb() function of can_dev
modules in [1]. However, can327 does not rely on that function and as
such does not offer TX timestamping.
Add a call to skb_tx_timestamp() in the can327_netdev_start_xmit()
function so that the module now supports TX software timestamps.
[1] commit 741b91f1b0ea ("can: dev: can_put_echo_skb(): add software
tx timestamps")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727101641.198847-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
At the suggestion of its author Oliver Hartkopp ([1]), I take over the
maintainer-ship and add myself to the authors of the driver.
[1] https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.net
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-8-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For non-legacy, i.e. ip based configuration, add support for listen-only
mode. If listen-only is requested send a listen-only ("L\r") command
instead of an open ("O\r") command to the adapter.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It is useless to define a custom function that does nothing but always
return the same error code. Better to use the generic can_change_mtu()
function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the driver there are parts of code where the prefix `slc' is used and
others where the prefix `slcan' is used instead. The patch replaces
every occurrence of `slc' with `slcan', except for the netdev functions
where, to avoid compilation conflicts, it was necessary to replace `slc'
with `slcan_netdev'.
The patch does not make any functional changes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Taking inspiration from the drivers/net/can/can327.c driver and at the
suggestion of its author Max Staudt, I removed legacy stuff like
`SLCAN_MAGIC' and `slcan_devs' resulting in simplification of the code
and its maintainability.
The use of slcan_devs is derived from a very old kernel, since slip.c
is about 30 years old, so today's kernel allows us to remove it.
The .hangup() ldisc function, which only called the ldisc .close(), has
been removed since the ldisc layer calls .close() in a good place
anyway.
The old slcanX name has been dropped in order to use the standard canX
interface naming. The ioctl SIOCGIFNAME can be used to query the name of
the created interface. Furthermore, there are several ways to get stable
interfaces names in user space, e.g. udev or systemd-networkd.
The `maxdev' module parameter has also been removed.
CC: Max Staudt <max@enpas.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20220728070254.267974-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Include only the necessary headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver uses the string "slcan" to populate
tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "slcan". Use
KBUILD_MODNAME to get rid on the hardcoded string names.
Similarly, the pr_info() and pr_err() hardcoded the "slcan"
prefix. Define pr_fmt so that the "slcan" prefix gets automatically
added.
CC: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20220728070254.267974-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.
It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().
As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that, execute mv88e6xxx_get_caps()
and obtain the capabilities driectly.
Fixes: 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220726230918.2772378-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using eth_zero_addr() to assign zero address instead of memset().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220701082935.110924-1-xuqiang36@huawei.com
|
|
For consistency, use an existing 'iftype' element which was already
having the interface type. Replace 'mode' with 'iftype' as it was used
for the same purpose.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-8-ajay.kathat@microchip.com
|
|
Similar to SPI priv data, add 'isinit' variable in SDIO priv. Make use
of the state to invoke hif_init() once, and acquire the lock before
accessing hif function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-7-ajay.kathat@microchip.com
|
|
Cancel the ongoing connection request to avoid any issue if the
interface is set down before the connection request is completed.
host_int_handle_disconnect was already available, so renamed it and used
the same API for 'ndio_close' cb.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-6-ajay.kathat@microchip.com
|
|
For string type WID packet, the data length is received as 16-bit value
so use 'get_unaligned_le16' conversion API to extract the correct length.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-5-ajay.kathat@microchip.com
|
|
Set station_info->filled to indicate signal level only when its value is
received successfully using wilc_get_rssi().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-4-ajay.kathat@microchip.com
|
|
Set 'close' variable to '1' to indicate closing operation when
initialisation fails during wlan_initialize_threads() call.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-3-ajay.kathat@microchip.com
|
|
WID_TX_POWER WID value is fetched from the firmware so it should be
added in'g_cfg_byte' array to store the data which is received from
firmware.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720160302.231516-2-ajay.kathat@microchip.com
|
|
No need to initialise static variables to zero.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
[kvalo@kernel.org: improve commit log]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220720194245.8442-1-gaoxin@cdjrlc.com
|
|
Eliminate the follow smatch warning:
drivers/net/wireless/broadcom/b43legacy/main.c:2947 b43legacy_wireless_core_stop() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220719075637.111716-1-yang.lee@linux.alibaba.com
|
|
When the driver fails at ieee80211_alloc_hw() at the probe time, the
driver will free the 'hw' which is not allocated, causing a bug.
The following log can reveal it:
[ 15.981294] BUG: KASAN: user-memory-access in mutex_is_locked+0xe/0x40
[ 15.981558] Read of size 8 at addr 0000000000001ab0 by task modprobe/373
[ 15.982583] Call Trace:
[ 15.984282] ieee80211_free_hw+0x22/0x390
[ 15.984446] rtl8xxxu_probe+0x3a1/0xab30 [rtl8xxxu]
Fix the bug by changing the order of the error handling.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220716130444.2950690-1-zheyuma97@gmail.com
|
|
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
(in wlcore_probe()) and so wl is never NULL.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220715224619.ht7bbzzrmysielm7@pengutronix.de
|
|
usb_get_dev will be called before lbs_get_firmware_async which means that
usb_put_dev need to be called when lbs_get_firmware_async fails.
Fixes: ce84bb69f50e ("libertas USB: convert to asynchronous firmware loading")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220620092350.39960-1-hbh25y@gmail.com
Link: https://lore.kernel.org/r/20220622113402.16969-1-colin.i.king@gmail.com
|
|
Eliminate the follow smatch warning:
drivers/net/wireless/marvell/mwifiex/pcie.c:3364 mwifiex_unregister_dev() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220615005316.9596-1-yang.lee@linux.alibaba.com
|
|
We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].
Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.
[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42
CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0xbb/0x6ac
? _printk+0xad/0xde
? refill_work+0x43/0xd4
kasan_report+0xa8/0x130
? refill_work+0x43/0xd4
refill_work+0x43/0xd4
process_one_work+0x43d/0x780
worker_thread+0x2a0/0x6f0
? process_one_work+0x780/0x780
kthread+0x167/0x1a0
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
...
Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function flexcan_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export flexcan_ethtool_ops so it becomes visible to
flexcan-core.c.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The function c_can_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export c_can_ethtool_ops so it becomes visible to
c_can_main.c.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The function slcan_set_ethtool_ops() does one thing: populate
net_device::ethtool_ops. Instead, it is possible to directly assign
this field and remove one function call and slightly reduce the object
size. To do so, export slcan_ethtool_ops so it becomes visible to
sclan-core.c.
This patch reduces the footprint by 14 bytes:
| $ ./scripts/bloat-o-meter drivers/net/can/slcan/slcan.{old,new}.o
| drivers/net/can/slcan/slcan.o
| add/remove: 0/1 grow/shrink: 1/0 up/down: 15/-29 (-14)
| Function old new delta
| slcan_open 1010 1025 +15
| slcan_set_ethtool_ops 29 - -29
| Total: Before=11115, After=11101, chg -0.13%
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220727104939.279022-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Remove duplicate 'in'.
Change 'entrys' to 'entries'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220622082524.21304-1-jiaming@nfschina.com
|
|
The double `the' is duplicated in line 1540, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220715050053.24382-1-wangborong@cdjrlc.com
Link: https://lore.kernel.org/r/20220722083031.74847-1-slark_xiao@163.com
Link: https://lore.kernel.org/r/20220722084158.75647-1-slark_xiao@163.com
Link: https://lore.kernel.org/r/20220722084833.76159-1-slark_xiao@163.com
|
