summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-04-05mwifiex: remove MWIFIEX_AUTH_MODE_ macrosMarc Yang4-11/+6
replace them with NL80211_AUTHTYPE_ macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove MWIFIEX_BSS_MODE_ macrosBing Zhao12-165/+74
replace them with NL80211_IFTYPE_ macros Also remove redundant functions mwifiex_drv_get_mode() and mwifiex_bss_ioctl_mode(). Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Add an error message when trying to send on a full queueHelmut Schaa1-1/+4
We already tell mac80211 to stop the queue when we hit a certain threshold. Hence, it shouldn't happen at all that a frame gets queued for tx on a full queue. Add an error message for this case. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Fix tx aggregation problems with some clientsHelmut Schaa3-1/+9
Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients rt2x00 should send a BlockAckReq if the transmission of an AMPDU subframe fails. Introduce a new flag TXDONE_AMPDU to indicate that this is an AMPDU subframe and pass IEEE80211_TX_STAT_AMPDU_NO_BACK to mac80211 if an AMPDU subframe failed during transmission. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Add support for the ZyXEL NWD-211AN USBIvo van Doorn1-0/+1
Add new USB ID Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Fix STBC transmissions to STAs with Rx STBC > 1Helmut Schaa1-2/+5
For STBC transmissions rt2x00 used the number of RxSTBC streams the destination STA indicates in its HT capabilities as STBC value in the TXWI. However, the legacy drivers and our own comment in rt2800.h suggest that the STBC field in the TXWI only allows a value of 0 or 1. The values 2 and 3 are reserved (probably for future devices). And indeed, STBC transmissions to STAs indicating more then 1 RxSTBC stream fail when the STBC field is set to something >1. Fix this by only setting the STBC field to 1 when STBC should be used. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Implement tx power temperature compensationHelmut Schaa9-5/+296
rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Remove obsolete rt2x00queue_align_payloadHelmut Schaa3-25/+0
Since commit d1c3a37ceeb1a5ea02991a0476355f1a1d3b3e83 ("mac80211: clarify alignment docs, fix up alignment") removed the requirement for a 4-byte aligned payload rt2x00queue_align_payload is obsolete as mac80211 will align the payload when it passes the frame to the net stack. As a result we can remove the call to rt2x00queue_align_payload in the rx path and since that's the last user we can remove rt2x00queue_align_payload altogether. One advantage is that we save some alignment operations for frames that don't need to be aligned (for example beause they are not passed to the net stack). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Indention cleanup in rt2800libHelmut Schaa1-14/+11
Fix the indention in rt2800_compesate_txpower and also fix a typo in the function name rt2800_compesate_txpower -> rt2800_compensate_txpower. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Don't recalculate HT40 compensation for each rateHelmut Schaa1-14/+18
Previously the HT40 tx power compensation value was calculated for each rate. However, the calculation is independent of the tx rate and as such can be precalculated and just passed in for each rate. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Restructure bw_comp calculationHelmut Schaa1-5/+8
Move the HT40 check inside the calculation function to make it easier for a later cleanup. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Remove DRIVER_SUPPORT_WATCHDOG flagHelmut Schaa5-10/+5
We can simply check if the driver registered the watchdog callback. There's no need to have an additional flag for that. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Calculate tx status fifo size instead of hardcoding itHelmut Schaa1-6/+12
Instead of hardcoding the tx status fifo size as 512 calculate it based on the number of tx queues and the number of entries per queue. Also round the size up to a power of 2 as kfifo would otherwise round it down. On rt2800pci this will increase the kfifo size from 512 bytes to 1024 bytes which is then able to hold the tx status for all entries in all tx queues. Furthermore, if the number of tx queues or tx entries changes in the future (use of the MGMT queue for example) the kfifo size doesn't need to be updated. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Limit rt2800pci txdone processing to 16 entries at onceHelmut Schaa1-2/+10
Instead of reporting an unlimited number of tx status reports to mac80211 stop after 16 frames and reschedule the tx status tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rt2x00: Limit rt2x00pci rxdone processing to 16 entries at onceHelmut Schaa6-11/+25
Instead of receiving an unlimited number of frames, stop after 16 entries and reschedule the rxdone tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05rtlwifi: Remove unused/unneeded variablesLarry Finger8-137/+98
Remove some unused variables and correct spelling errors. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: use IEEE80211_HT_CAP_ macros for 11n cap_infoMarc Yang7-129/+63
The hw_dot_11n_dev_cap reported by firmware hw_spec has different format than the 11n capabilities. Hence a lot of SET_ and RESET_ bit operation macros were used to convert the dev_cap format to 11n capability format. However the locally defined 11n ht_cap macros are not necessary as we can use IEEE80211_HT_CAP_ macros directly. The 32-bit dev_cap bitmap is added as comment to explain the mapping between firmware and 11n spec. Some unused macros and unnecessary adapter variables are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove macro SHORT_SLOT_TIME_DISABLEDBing Zhao2-6/+3
and SHORT_SLOT_TIME_ENABLED. Use WLAN_CAPABILITY_SHORT_SLOT_TIME instead. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove unnecessary _set_auth functionsMarc Yang5-77/+19
mwifiex_set_encrypt_mode() mwifiex_set_auth_mode() mwifiex_set_auth() These functions are confusing and misleading. And they are really not needed at all. Some unused definitions are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05mwifiex: remove helper functions for displaying 11n capabilitiesYogesh Ashok Powar4-116/+0
'iw list' is sufficient to retrieve the information which was displayed by these functions. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k_hw: remove ath9k_get_channel_edgesMohammed Shafi Shajakhan2-28/+0
This function is nowhere used. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k: remove set11n_virtualmorefragMohammed Shafi Shajakhan4-32/+0
This does not seems to be used anywhere so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ath9k: cleanup few redundant macrosMohammed Shafi Shajakhan3-7/+1
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05Merge branch 'wireless-next-2.6' of ↵John W. Linville16-433/+126
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2011-03-30ath9k_hw: remove pCap->tx_triglevel_maxFelix Fietkau3-7/+1
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ATH9K_HW_CAP_ENHANCEDPMFelix Fietkau2-3/+0
It is not used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->keycache_sizeFelix Fietkau4-21/+2
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->reg_capFelix Fietkau2-18/+0
It is not used anywhere and seems pointless Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove ah->config.ht_enableFelix Fietkau2-7/+1
It is only used in one place, and the device id check that it's based on can be moved there as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->total_queuesFelix Fietkau3-41/+6
The EEPROM contains a field that can restrict the number of hardware queues, however this is not only useless (all the known chips contain the same number of hardware queues), but also potentially dangerous in case of a misprogrammed EEPROM (could trigger driver crashes), so let's just ignore it completely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: turn a few big macros into functionsFelix Fietkau4-31/+51
RF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big, so they shouldn't be inlined at every single callsite, especially since they can easily be turned into real functions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: replace REG_READ+REG_WRITE with REG_RMWFelix Fietkau2-83/+56
It's easier to read and it slightly decreases code size Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: add a new register op for read-mask-writeFelix Fietkau4-6/+42
Reduces the number of calls to register ops. On MIPS this reduces the ath9k_hw binary size from 321k down to 310k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: embed the ath_ops callbacks in the ath_hw structFelix Fietkau3-22/+18
With this change, loading the address to a register read/write function costs only one pointer dereference instead of two. On MIPS this reduces ath9k_hw binary size from 326k down to 321k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: Support RSN IBSSJouni Malinen2-0/+16
Add support for using RSN IBSS with ath9k. For now, this uses software crypto for group addressed frames in RSN IBSS, but that may be optimized in the future by extending the key cache design to support per-STA RX GTK. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: fix stuck beacon detectionFelix Fietkau2-9/+9
Stuck beacon detection is supposed to trigger when 9 consecutive beacons could not be sent by the hardware. When the driver runs only one active AP mode interface, it still configures the hardware beacon timer for 4 (ATH_BCBUF) beacon slots slots, which causes stuck beacon detection to be reset if ath9k_hw_stoptxdma clears the stuck frames between SWBA intervals. Fix this by not resetting the missed beacon count for empty slots and multiplying the threshold not by the maximum number of beacon slots but by the configured number of beacon interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: trigger nfcal only after multiple missed beacons in AP modeFelix Fietkau1-1/+2
Single missed (i.e. not transmitted) beacons in AP mode are not very rare and not necessarily an indicator of strong interference, so only trigger noise floor recalibration when multiple consecutive beacons could not be transmitted. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: fix beacon timer handling issuesFelix Fietkau5-79/+49
AP mode beacon timers in ath9k are configured in milliseconds, which breaks when increasing ATH_BCBUF to 8 instead of 4 (due to rounding errors). Since the hardware timers are actually configured in microseconds, it's better to let the driver use that unit directly. To be able to do that, the beacon interval parameter abuse for passing certain flags needs to be removed. This is easy to do, because those flags are completely unnecessary anyway. ATH9K_BEACON_ENA is ignored, ATH9K_BEACON_RESET_TSF can be replaced with calling ath9k_hw_reset_tsf from the driver directly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30libertas_spi: Add support for suspend/resumeVasily Khoruzhick1-0/+65
Add support for suspend/resume in if_spi. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30wireless: mwifiex: initial commit for Marvell mwifiex driverBing Zhao37-0/+25465
This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove AR9485 1.0 supportLuis R. Rodriguez2-1015/+0
Only AR9485 1.1 was sold. This debloats the driver by ~14 KiB. text data bss dec hex filename 300413 624 1056 302093 49c0d drivers/net/wireless/ath/ath9k/ath9k_hw.ko text data bss dec hex filename 310285 624 1056 311965 4c29d drivers/net/wireless/ath/ath9k/ath9k_hw-old.ko $ du -b ath9k_hw* 6210541 ath9k_hw.ko 6225089 ath9k_hw-old.ko Cc: Bill Wu <bill.wu@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Forbes Tsai <Forbes.Tsai@Atheros.com> Cc: Jesmine Chen <jesmine.chen@atheros.com> Cc: Marvian Chen <Hou-hua.Chen@Atheros.com> Cc: Vivek Natarajan <vivek.natarajan@atheros.com> Cc: Bernadette Yetso <bernadette.yetso@atheros.com> Cc: Sarvesh Shrivastava <sarvesh.shrivastava@atheros.com> Acked-by: Yi-Chen Su <yi-chen.su@atheros.com> Acked-by: Jeffrey Chung <jeffrey.chung@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: remove the pending frames ath_txq_schedule workaroundFelix Fietkau1-27/+0
This workaround called ath_txq_schedule whenever there were still pending frames for a queue, but the queue depth was zero. Because of its its high false positive probability (e.g. with paused TIDs) and because it is in the way of other pending work (AP powersave fixes), it is better to remove this code entirely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: force rx chainmask to 7 on AR9100Felix Fietkau1-0/+2
Most AR9100 devices already have a chainmask of 7 (three antennas), however on the ones that don't (rx and tx chainmask set to 5), problems with IQ mismatch calibration have been observed. This shows up as tx queue hangs (and subsequent hardware resets) if traffic is sent during this type of calibration. Forcing the rx chainmask to 7 fixes the calibration issues with no apparent negative side effects on throughput and stability. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: enable a BlockAck related fixup specific to AR9100Felix Fietkau2-0/+3
Fixes interop issues with aggregation in combination with multi-BSSID Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add support for overriding LED pin and GPIO settings from platform dataFelix Fietkau3-8/+16
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add support for overriding the MAC address through platform dataFelix Fietkau1-1/+6
On some devices the correct MAC address is not in the EEPROM data, but stored somewhere else. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add an interface for overriding the value of specific GPIO pinsFelix Fietkau3-0/+24
Some devices control antenna settings or other things through GPIO pins of the wireless interface. Add a debugfs interface for changing those and keeping them set across card resets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: remove unnecessary debugfs return code checksFelix Fietkau1-59/+29
Since the ath9k debugfs directory is cleaned up by debugfs_remove_recursive, there's no point in checking the return code of every single debugfs create line. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30rtlwifi: rtl8192c{e,u}: Remove some extraneous casts on memcpy commandsLarry Finger2-3/+3
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30mwl8k: Queue ADDBA requests in respective data queuesNishant Sarmukadam1-0/+46
Queue ADDBA requests in respective data queues to avoid ADDBA requests and the the related data packets (to the same ra/tid) queued in the hardware to be sent out asynchronously. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-13 03:26:52 +0300