Age | Commit message (Expand) | Author | Files | Lines |
2013-10-01 | igb: Add ethtool support to configure number of channels | Laura Mihaela Vasilescu | 3 | -0/+107 |
2013-10-01 | igb: Add ethtool offline tests for i354 | Fujinaka, Todd | 1 | -2/+4 |
2013-10-01 | ixgbe: remove marketing names from busy poll code | Jacob Keller | 3 | -23/+23 |
2013-10-01 | ixgbe: Cleanup the use of tabs and spaces | Jeff Kirsher | 2 | -26/+26 |
2013-10-01 | ixgbe: ethtool DCB registers dump for 82599 and x540 | Leonardo Potenza | 2 | -15/+65 |
2013-10-01 | ixgbevf: move API neg to reset path | Don Skidmore | 1 | -11/+10 |
2013-10-01 | ixgbevf: add wait for Rx queue disable | Don Skidmore | 1 | -17/+44 |
2013-10-01 | ixgbevf: cleanup redundant mailbox read failure check | Don Skidmore | 1 | -27/+2 |
2013-10-01 | ixgbevf: do not print registers to dmesg in ixgbevf_get_regs | Jacob Keller | 1 | -53/+2 |
2013-10-01 | be2net: add a counter for pkts dropped in xmit path | Sathya Perla | 3 | -2/+8 |
2013-10-01 | be2net: fix adaptive interrupt coalescing | Sathya Perla | 5 | -73/+115 |
2013-10-01 | be2net: call ENABLE_VF cmd for Skyhawk-R too | Vasundhara Volam | 2 | -2/+3 |
2013-10-01 | be2net: Create single TXQ on BE3-R 1G ports | Vasundhara Volam | 1 | -9/+2 |
2013-10-01 | be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd | Vasundhara Volam | 1 | -1/+2 |
2013-10-01 | be2net: Call be_vf_setup() even when VFs are enbaled from previous load | Vasundhara Volam | 2 | -5/+5 |
2013-10-01 | net: can: c_can_platform: Remove redundant of_match_ptr | Sachin Kamat | 1 | -1/+1 |
2013-10-01 | net: ethernet: cpsw-phy-sel: Remove redundant of_match_ptr | Sachin Kamat | 1 | -1/+1 |
2013-10-01 | net: ethernet: cpsw: Remove redundant of_match_ptr | Sachin Kamat | 1 | -1/+1 |
2013-10-01 | bonding: RCUify bond_set_rx_mode() | Veaceslav Falico | 1 | -3/+4 |
2013-10-01 | drivers: net: phy: marvell.c: removed checkpatch.pl warnings | Avinash Kumar | 1 | -2/+2 |
2013-10-01 | net: skb_is_gso_v6() requires skb_is_gso() | Eric Dumazet | 1 | -8/+10 |
2013-10-01 | bgmac: add support for Byte Queue Limits | Hauke Mehrtens | 1 | -0/+10 |
2013-10-01 | b44: add support for Byte Queue Limits | Hauke Mehrtens | 1 | -0/+10 |
2013-10-01 | net ipv4: Convert ipv4.ip_local_port_range to be per netns v3 | Eric W. Biederman | 1 | -1/+1 |
2013-10-01 | Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next | David S. Miller | 15 | -18/+10 |
2013-10-01 | xen-netback: improve ring effeciency for guest RX | Wei Liu | 1 | -83/+61 |
2013-09-30 | bonding: trivial: remove forgotten bond_next_vlan() | Veaceslav Falico | 1 | -1/+0 |
2013-09-30 | hamradio: baycom: remove deprecated IRQF_DISABLED | Michael Opdenacker | 2 | -2/+2 |
2013-09-30 | net: qmi_wwan: fix checkpatch warnings | Fabio Porcedda | 1 | -20/+36 |
2013-09-30 | net: qmi_wwan: add Telit LE920 newer firmware support | Fabio Porcedda | 1 | -0/+1 |
2013-09-29 | bonding: remove bond_next_slave() | Veaceslav Falico | 1 | -31/+0 |
2013-09-29 | bonding: don't use bond_next_slave() in bond_info_seq_next() | Veaceslav Falico | 1 | -4/+12 |
2013-09-29 | bonding: remove unused __get_next_agg() | Veaceslav Falico | 1 | -22/+0 |
2013-09-29 | bonding: make bond_3ad_unbind_slave() use bond_for_each_slave() | Veaceslav Falico | 1 | -4/+9 |
2013-09-29 | bonding: make ad_agg_selection_logic() use bond_for_each_slave() | Veaceslav Falico | 1 | -12/+10 |
2013-09-29 | bonding: make __get_active_agg() use bond_for_each_slave() | Veaceslav Falico | 1 | -8/+7 |
2013-09-29 | bonding: make ad_port_selection_logic() use bond_for_each_slave() | Veaceslav Falico | 1 | -2/+7 |
2013-09-29 | bonding: remove __get_first_port() | Veaceslav Falico | 1 | -14/+4 |
2013-09-29 | bonding: remove __get_next_port() | Veaceslav Falico | 1 | -25/+9 |
2013-09-29 | bonding: verify if we still have slaves in bond_3ad_unbind_slave() | Veaceslav Falico | 1 | -1/+3 |
2013-09-29 | bonding: correctly verify for the first slave in bond_enslave | Veaceslav Falico | 1 | -1/+1 |
2013-09-29 | bnx2x: use pcie_get_minimum_link() | Yuval Mintz | 2 | -39/+12 |
2013-09-29 | bnx2x: Add support for EXTPHY2 LED mode | Yaniv Rosner | 2 | -3/+18 |
2013-09-29 | bnx2x: Change function prototype | Yaniv Rosner | 1 | -3/+2 |
2013-09-29 | bnx2x: Don't disable/enable SR-IOV when loading | Ariel Elior | 3 | -26/+1 |
2013-09-29 | bnx2x: Correct VF driver info | Yuval Mintz | 2 | -1/+4 |
2013-09-29 | bnx2x: Test nvram when interface is down | Yuval Mintz | 1 | -9/+10 |
2013-09-28 | lance: Fix hardcoded interrupt name lp->name to use system device value | Nate Levesque | 1 | -1/+1 |
2013-09-28 | hp100: replace hardcoded name in /proc/interrupts with interface name | Mihir Singh | 1 | -1/+1 |
2013-09-28 | net: phy: at803x: add suspend/resume callbacks | Daniel Mack | 1 | -0/+45 |