| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 5ccde4c81e843ab6b3a324c8e2aa96d9b1270a1a upstream.
dwmac4's transmit performance dropped by a factor of four due to an
incorrect assumption about which definitions are for what. This
highlights the need for sane register macros.
Commit 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT
definitions") changed the way the txpbl value is merged into the
register:
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan));
- value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+ value = value | FIELD_PREP(DMA_BUS_MODE_PBL, txpbl);
With the following in the header file:
#define DMA_BUS_MODE_PBL BIT(16)
-#define DMA_BUS_MODE_PBL_SHIFT 16
The assumption here was that DMA_BUS_MODE_PBL was the mask for
DMA_BUS_MODE_PBL_SHIFT, but this turns out not to be the case.
The field is actually six bits wide, buts 21:16, and is called
TXPBL.
What's even more confusing is, there turns out to be a PBLX8
single bit in the DMA_CHAN_CONTROL register (0x1100 for channel 0),
and DMA_BUS_MODE_PBL seems to be used for that. However, this bit
et.al. was listed under a comment "/* DMA SYS Bus Mode bitmap */"
which is for register 0x1004.
Fix this up by adding an appropriately named field definition under
the DMA_CHAN_TX_CONTROL() register address definition.
Move the RPBL mask definition under DMA_CHAN_RX_CONTROL(), correctly
renaming it as well.
Also move the PBL bit definition under DMA_CHAN_CONTROL(), correctly
renaming it.
This removes confusion over the PBL fields.
Fixes: 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT definitions")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Bisected-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/51859704-57fd-4913-b09d-9ac58a57f185@bootlin.com
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vgY1k-00000003vOC-0Z1H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d36a4a8bf62dc508bc6bb4b59727aec25064ca5 upstream.
The mlx5_query_mcia() function unconditionally dereferences the status
pointer to store the MCIA register status value.
However, mlx5e_get_module_id() passes NULL since it doesn't need the
status value.
Add a NULL check before dereferencing the status pointer to prevent a
NULL pointer dereference.
Fixes: 2e4c44b12f4d ("net/mlx5: Refactor EEPROM query error handling to return status separately")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 96ca1e658ae459276292bd6d971ab5d8c7e0379a ]
ipa_smp2p_init() acquires two Qualcomm SMEM state handles with
qcom_smem_state_get(). However, neither the init error paths
nor ipa_smp2p_exit() release them.
Release both handles with qcom_smem_state_put() in the init
error paths and in ipa_smp2p_exit().
Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260624065955.2822765-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ kzalloc_obj() context line kept as kzalloc(sizeof(*smp2p), GFP_KERNEL) since ipa_smp2p.c was not yet converted in this tree ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8cdcf3d2caacdee7ddd363705fb4d93b0c1a0915 ]
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2156a29aecfffa2eb7c558255690084efbe9f3b0 ]
rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/
octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY
request body verbatim, and rvu_rep_up_notify() then forwards
event->pcifunc (the nested body field, distinct from the
AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and
the AF->PF mailbox device index without any bounds check.
A VF attached to a PF that has been put into switchdev
representor mode reaches this path: the VF mailbox handler
otx2_pfvf_mbox_handler() forwards every message id including
MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF
dispatcher rewrites only msg->pcifunc, leaving struct
rep_event::pcifunc attacker-controlled. The sibling
rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc
is not rvu->rep_pcifunc; this handler has no equivalent gate.
An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[]
element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE,
turns into a six-byte attacker-chosen OOB ether_addr_copy() target
inside the queued worker; KASAN reports a slab-out-of-bounds write
in rvu_rep_wq_handler.
Reject malformed requests at the handler entry by gating on
is_pf_func_valid(), which is already the canonical PF/VF range check
in this driver; expose it via rvu.h so callers in rvu_rep.c can use
it instead of open-coding the same range arithmetic.
Fixes: b8fea84a0468 ("octeontx2-pf: Add support to sync link state between representor and VFs")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260520154157.1439319-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8cdcf3d2caac ("octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5316394b1752f6cf3f9901e7fefdec1cd1d97fd3 ]
Before the commit 755391121038 ("net: mana: Allocate MSI-X vectors
dynamically"), all the MANA IRQs were assigned statically and together
during early driver load.
After this commit, the IRQ allocation for MANA was done in two phases.
HWC IRQ allocated earlier and then, queue IRQs dynamically added at a
later point. By this time, the IRQ weights on vCPUs can become imbalanced
and if IRQ count is greater than the vCPU count the topology aware IRQ
distribution logic in MANA can cause multiple MANA IRQs to land on the
same vCPUs, while other sibling vCPUs have none (case 1).
On SMP enabled, low-vCPU systems, this becomes a bigger problem as the
softIRQ handling overhead of two IRQs on the same vCPUs becomes much more
than their overheads if they were spread across sibling vCPUs.
In such cases when many parallel TCP connections are tested, the
throughput drops significantly.
Fix the affinity assignment logic, in cases where the IRQ count is greater
than the vCPU count and when IRQs are added dynamically, by utilizing all
the vCPUs irrespective of their NUMA/core bindings (case 2).
The results of setting the affinity and hint to NULL were also studied,
and we observed that, with this logic if there are pre-existing IRQs
allocated on the VM (apart from MANA), during MANA IRQs allocation, it
leads to clustering of the MANA queue IRQs again (case 3).
=======================================================
Case 1: without this patch
=======================================================
4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 0
IRQ2: mana_q2 2
IRQ3: mana_q3 0
IRQ4: mana_q4 3
%soft on each vCPU(mpstat -P ALL 1) on receiver
vCPU 0 1 2 3
=======================================================
pass 1: 38.85 0.03 24.89 24.65
pass 2: 39.15 0.03 24.57 25.28
pass 3: 40.36 0.03 23.20 23.17
=======================================================
Case 2: with this patch
=======================================================
4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 0
IRQ2: mana_q2 1
IRQ3: mana_q3 2
IRQ4: mana_q4 3
%soft on each vCPU(mpstat -P ALL 1) on receiver
vCPU 0 1 2 3
=======================================================
pass 1: 15.42 15.85 14.99 14.51
pass 2: 15.53 15.94 15.81 15.93
pass 3: 16.41 16.35 16.40 16.36
=======================================================
Case 3: with affinity set to NULL
=======================================================
4 vCPU(2 cores), 5 MANA IRQs (1 HWC + 4 Queue)
TYPE effective vCPU aff
=======================================================
IRQ0: HWC 0
IRQ1: mana_q1 2
IRQ2: mana_q2 3
IRQ3: mana_q3 2
IRQ4: mana_q4 3
=======================================================
Throughput Impact(in Gbps, same env)
=======================================================
TCP conn with patch w/o patch aff NULL
20480 15.65 7.73 5.25
10240 15.63 8.93 5.77
8192 15.64 9.69 7.16
6144 15.64 13.16 9.33
4096 15.69 15.75 13.50
2048 15.69 15.83 13.61
1024 15.71 15.28 13.60
Fixes: 755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
Cc: stable@vger.kernel.org
Co-developed-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260624072138.1632849-1-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Kept 7.1's `int *irqs, irq, err, i;` declaration (minus the deleted `skip_first_cpu`) instead of upstream's `msi` variant, as this tree lacks the `mana_gd_get_gic()` refactor. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2e2a83b4998af4384e677d3b2ac08565274279bf ]
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted.
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcd9b465965422b9654f6026e8a2fa8984f74c3c upstream.
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails.
Fixes: a3a48de5eade ("vxlan: mdb: Add MDB control path support")
Cc: stable@vger.kernel.org
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260720160428.249356-1-jamestiotio@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c50efa1faf3a1a96e100b07ec7a2f3164d90bee upstream.
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission.
Fixes: d6e882b89fdf ("rtase: Implement .ndo_start_xmit function")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709103456.83789-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9c238f6fe42fb1b4dba3a578277de32cb487937 upstream.
pppoe_sendmsg() saves a pointer to the PPPoE header before calling
dev_hard_header(). Device header callbacks are allowed to reallocate the
skb head, invalidating pointers into it.
This can happen when a send is blocked in copy_from_user() while the first
non-Ethernet port is added to an empty team device. The team's delegated
GRE header callback then expands the skb head. PPPoE subsequently writes
six bytes through the stale pointer into the freed head.
Reload the PPPoE header through the skb's network-header offset after
device header creation. pskb_expand_head() updates that offset when it
relocates the head.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260722093814.3017176-1-manizada@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4710ae2e7e322fdaefb4be8604228279cfaf48c upstream.
ovpn_peer_keepalive_send() passes its peer reference to
ovpn_xmit_special(), which ultimately drops it. The keepalive scheduler
currently queues the work first and takes the reference only after
schedule_work() reports that the work was queued.
Once schedule_work() queues the item, another CPU may run the worker
before the caller gets to ovpn_peer_hold(). In that case the worker can
consume a reference that was not acquired for it, corrupting the peer
lifetime accounting.
Take the peer reference before queueing the work and drop it again when
the work was already pending.
Fixes: 3ecfd9349f40 ("ovpn: implement keepalive mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63bbe18fc03062f483c627838a566a707b62da79 upstream.
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point.
Fixes: a6a5e87b3ee4 ("ovpn: avoid sleep in atomic context in TCP RX error path")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 793b9b729f1e8de57be8c8daf1a9838be96cabed upstream.
The MCTP serial receive state machine reads a frame length byte in
mctp_serial_push_header() case 2 and validates it upper-bound-only:
if (c > MCTP_SERIAL_FRAME_MTU) {
dev->rxstate = STATE_ERR;
} else {
dev->rxlen = c;
dev->rxpos = 0;
dev->rxstate = STATE_DATA;
...
}
A length of zero passes this check, so rxlen is set to 0 and the state
machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the
incoming byte is stored and rxpos incremented before the terminator is
tested:
dev->rxbuf[dev->rxpos] = c;
dev->rxpos++;
dev->rxstate = STATE_DATA;
if (dev->rxpos == dev->rxlen) {
dev->rxpos = 0;
dev->rxstate = STATE_TRAILER;
}
With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is
already 1 on the first data byte), so subsequent bytes are written past
the end of the fixed 74-byte rxbuf, which is the last member of the
netdev private area. Every following data byte is an attacker-controlled
1-byte out-of-bounds heap write, and the overflow continues until a
frame (0x7e) or escape byte resets the parser -- effectively unbounded.
Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line
discipline and bring the resulting mctpserialN netdev up, after which
the bytes arrive via the tty receive path.
Route a zero-length frame straight to STATE_TRAILER instead of
STATE_DATA. The trailer/framing bytes are still consumed, and the frame
resolves to a zero-length skb that the MCTP core rejects; the parser
never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can
no longer occur.
KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this
change):
UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370
index 74 is out of range for type 'u8 [74]'
BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf
Write of size 1 at addr ... by task kworker/u16:0
mctp_serial_tty_receive_buf
tty_ldisc_receive_buf
flush_to_ldisc
Allocated by task 152:
alloc_netdev_mqs
mctp_serial_open
v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so
the trailer/framing bytes are still consumed (Jeremy Kerr).
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding")
Cc: stable@vger.kernel.org
Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715082021.46315-1-doruk@0sec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2915681b89f817677ab9f1166d95b595bc144f5f upstream.
ptp.cached_phc_time is a 64-bit value updated by a periodic work item
on one CPU and read locklessly on another. On 32-bit or non-atomic
architectures this can result in a torn read. Use READ_ONCE() to
enforce a single atomic load.
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59abb87159c53605c063f6e2ceb215b5eba43ee6 upstream.
set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of
ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from
providing ptype >= 1024 through VIRTCHNL, resulting in a write past
the end of the bitmap and a kernel page fault.
Reproduced with a custom kernel module injecting a crafted
VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592),
FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0,
kernel 7.1.0-rc1.
crash_parser: ice_parser_profile_init @ ffffffffc0d61b60
crash_parser: setting ptype=0xffff (max valid=1023)
crash_parser: calling ice_parser_profile_init -- expect OOB crash!
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1
Hardware name: Intel Corporation S2600BPB/S2600BPB
RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice]
Call Trace:
<TASK>
? __pfx_ice_parser_profile_init+0x10/0x10 [ice]
crash_init+0x127/0xff0 [crash_parser]
do_one_initcall+0x45/0x310
do_init_module+0x64/0x270
init_module_from_file+0xcc/0xf0
idempotent_init_module+0x17b/0x280
__x64_sys_finit_module+0x6e/0xe0
Bail out early with -EINVAL when ptype is out of range.
Fixes: e312b3a1e209 ("ice: add API for parser profile initialization")
Cc: stable@vger.kernel.org
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b65352a1bac64442ad95e64f385b40ccb9f1b0db upstream.
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6a7e00b81e35ef1325234925f2fe1e53b466f92 upstream.
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild.
Fixes: 8293e4cb2ff5 ("ice: introduce PTP state machine")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit def9a4745e105145133e442dd8a1c126caf0f553 upstream.
Commit 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
added a path in xpcs_get_state_c37_sgmii() that reads speed/duplex from
BMCR after AN completes. However, BMCR does not reflect the negotiated
result on the hardware where this has been tested:
- On RK3568 (MAC side SGMII), BMCR returns a fixed hardware reset value
- Wangxun engineer Jiawen Wu confirmed that on their side, "BMCR looks
like it only wants to be return as 0" [0]
The correct information is available in CL37_ANSGM_STS, which contains
the actual link status and negotiated speed/duplex.
This bug was previously masked by phylink core, which overrides the PCS
link state with the PHY state when a PHY is present:
/* If we have a phy, the "up" state is the union of both the
* PHY and the MAC
*/
if (phy)
link_state.link &= pl->phy_state.link;
Thus, when the link is down, the PHY's link_down state is applied on top
of whatever the PCS reports, hiding the broken PCS state reading path.
Modify xpcs_get_state_c37_sgmii() to:
1. Read link state from CL37_ANSGM_STS
2. If link is up, report speed/duplex from CL37_ANSGM_STS
3. Remove the broken BMCR reading path entirely
Also properly set state->an_complete to reflect the AN completion status,
and clear CL37_ANCMPLT_INTR when link is down to avoid stale state.
[0] https://lore.kernel.org/all/000c01dd1593$2ac0b0f0$804212d0$@trustnetic.com/
Fixes: 2a22b7ae2fa3 ("net: pcs: xpcs: adapt Wangxun NICs for SGMII mode")
Cc: stable@vger.kernel.org
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260717074324.3250043-2-coiaprant@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14fa65d10f5696b063a7d8d26e8291ea84a2c6ed upstream.
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool.
Fixes: 701a0fd52318 ("hip04_eth: fix missing error handle for build_skb failed")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260712142729.2057636-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e32649b4bad90a6216d8e93cd7dd050af8ac9740 upstream.
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery.
Fixes: bf11485f8419 ("net/mlx5: Register mlx5e priv to devcom in MPV mode")
Assisted-by: Codex:gpt-5
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707233911.3651139-1-manjunath.b.patil@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8efb8f8bbb353b8f2fdf4f37534c6d96c9f69e01 upstream.
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 5b861f6baa3a ("geneve: add rtnl changelink support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260716203500.70573-3-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee7f9bb9320add61f7b367d7e6cd55e3a3a4d65d upstream.
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Sungmin Kang <726ksm@gmail.com>
Link: https://patch.msgid.link/20260718073631.1674-1-726ksm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a61bd9637f3d929aa846e4eb3d98b48c26fcb0e upstream.
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 8bcdc4f3a20b ("vxlan: add changelink support")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260716203500.70573-2-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ab78ead2481adb52f9eb5b403865c529f6f2348 upstream.
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1cc1 ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea20c44935d6142daecfa9b39d635033a7553e1b upstream.
When an AMT device is removed, pending delayed works can still access
the freed amt_dev structure, which may result in kernel crashes or
memory corruption.
amt_dev_stop() cancels req_wq and discovery_wq with
cancel_delayed_work_sync(), but these works can be scheduled again
from event_wq after the cancellation. This allows delayed works to
access the freed amt_dev structure after the netdev has been released.
The following is a simple race scenario:
CPU0 CPU1
amt_dev_stop()
cancel_delayed_work_sync()
amt_event_work()
mod_delayed_work(req_wq)
free netdev
req_wq accesses freed amt_dev
Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and
discovery_wq from being queued again and wait for running work items
to complete.
The delayed works are disabled after initialization in
amt_newlink() and enabled only when the device is successfully opened.
This keeps the delayed work lifecycle synchronized with the lifetime
of the AMT device.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Cc: stable@vger.kernel.org
Signed-off-by: Shihuang Liu <shlomojune6@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260722113919.7723-1-shlomojune6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e120ee0822b7cc650bd7b29682a34e137cec10d upstream.
of_get_child_by_name() returns a node pointer with refcount
incremented, but the error path when ath11k_ahb_setup_msa_resources()
fails does not release it. Add the missing of_node_put() to avoid
leaking the reference.
Cc: stable@vger.kernel.org
Fixes: 095cb947490c ("wifi: ath11k: allow missing memory-regions")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609092528.220547-1-vulab@iscas.ac.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29ab31f3f27157648f2f7e6d5e1fd9792fdf0614 upstream.
The BCM43752 is not reliable with the default 512-byte SDIO function 2
block size: on an i.MX8MP board with an AMPAK AP6275S module at
SDR104 / 200 MHz, an iperf TX stress test kills WLAN within seconds:
mmc_submit_one: CMD53 sg block write failed -84
brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Commit d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
set up the 43752 like the 4373 for the F2 watermark but missed the F2
block size, which the 4373 limits to 256 bytes. The vendor driver
(bcmdhd) also programs a 256-byte F2 block size for this chip and runs
the same hardware without errors.
Group the 43752 with the 4373, matching the F2 watermark handling.
With this change a 10-minute bidirectional iperf3 soak completes with
zero SDIO errors at ~270 Mbit/s in each direction.
Backporting note: kernels before v6.18 name this id
SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752, so on those trees the case
label added by this patch must be adjusted to that name. Cherry-picking
the rename commit 74e2ef72bd4b ("wifi: brcmfmac: fix 43752 SDIO FWVID
incorrectly labelled as Cypress (CYW)") first is not a clean
alternative: on trees before v6.17 its context collides with the 43751
additions, and trees before v6.2 lack the FWVID framework it touches.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.17
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715-b43752-f2-blksz-v2-1-f9be49856050@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 538c51e9d124cf656f2dd0c0394a8545efc7102d upstream.
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-2-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit feeff151c83e7f0ffcdedcad5343852d23d1f6e1 upstream.
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da4082e91acabc1498611ed8ccc53f0610baefc6 upstream.
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39afc46c0243d10b7795e6e6cf4ae91f41732120 upstream.
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c4c97b60a5e978121d9ee8cb0ab3916e5d6a8de upstream.
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association.
Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260714091811.3596126-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3d68e294cbb6a4090bb219d3dcaca85a011809b upstream.
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 396939f94084 ("mwifiex: add HT operation IE in TDLS setup confirm")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716103042.88469-1-doruk@0sec.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba7debb4dd6427386862220e8335a53a4bfc235d upstream.
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206185207.30098-1-git@danielhodges.dev
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44126b6994eeb28f2103b638e698f40a1244f327 upstream.
aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied
win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not
return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to
compute a kzalloc size and stored in rxtid->hold_q_sz, leading to
zero-size or overflowed allocations and subsequent out-of-bounds access.
Clean up any previously active aggregation session for the TID first,
then return early when win_sz is out of the valid range, instead of
proceeding with a broken allocation size.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260702005020.708717-1-tristmd@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 649ea07fc25a17aa51bff710baac1ab161022a7c ]
Derive the hardware QoS channel from opt->parent instead of opt->handle
in airoha_tc_setup_qdisc_ets(). The ETS qdisc handle is either
user-specified or auto-allocated by qdisc_alloc_handle() and bears no
relation to the HTB leaf classid that identifies the hardware channel.
HTB derives the channel from TC_H_MIN(opt->classid), and ETS is always
attached as a child of an HTB leaf, so its opt->parent matches that
classid. Using opt->handle instead can cause two ETS qdiscs on different
HTB leaves to collide on the same hardware channel, corrupting scheduler
configuration and stats.
Fixes: 20bf7d07c956 ("net: airoha: Add sched ETS offload support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260720-airoha-ets-handle-fix-v2-1-6f7129ddc06f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 144539bbfd3cea1ab0fb6f5216d6004c1f4f029b ]
The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest
TxTime First) offload enabled. This bitmap is indexed by queue number
and is set by ice_offload_txtime(), which only operates on PF VSI
queues.
However, ice_is_txtime_ena() does not check the VSI type before
consulting the bitmap. When ETF offload is enabled on PF Tx queue 0,
bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset
rebuild, the CTRL VSI's Tx queue 0 is reconfigured and
ice_is_txtime_ena() is called for that ring. Since it only checks
pf->txtime_txqs by queue index without distinguishing VSI type, it
finds bit 0 set and returns true, matching the PF VSI's ETF queue,
not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously
allocate a tstamp_ring for the CTRL VSI ring.
Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring()
takes an early return at the !netdev check before reaching
ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset
leaks one 64-byte tstamp_ring.
Fix this by restricting ice_is_txtime_ena() to return true only for
PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues.
Fixes: ccde82e90946 ("ice: add E830 Earliest TxTime First Offload support")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6da9b7d48599db078aea6144997a381f8d90d45 ]
ice_init_lag() associates recipes to profiles, assuming that Link
Aggregation-related profiles will always have profile ID lower than 70
(ICE_PROFID_IPV6_GTPU_IPV6_TCP_INNER). This value seems arbitrary and
might not always be valid for some versions of DDP package, i.e. LAG
profiles may have profile ID greater than 70. This would lead to
misconfigured switch and LAG not working properly.
Fix it by checking up to maximum profile ID.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99d0f42b0e5c57e4c02070a908aaff082881293a ]
Currently ice_eswitch_attach_vf() is called unconditionally in
ice_start_vfs(), which causes VF creation to fail when CONFIG_ICE_SWITCHDEV
is not defined.
Fix this by adding switchdev mode checks at the call sites before
calling ice_eswitch_attach_vf(), consistent with how
ice_eswitch_attach_sf() is already handled in ice_devlink_port_new().
This is similar to commit aacca7a83b97 ("ice: allow creating VFs for
!CONFIG_NET_SWITCHDEV") which fixed the same issue for the previous
ice_eswitch_configure() API.
Fixes: 415db8399d06 ("ice: make representor code generic")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260717185340.3595286-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb0d96ebe5f4d1acccf4dc36ca7f01f9a8fa1ba1 ]
The egress rate calculation computes an incorrect mantissa and exponent,
causing up to ~50% deviation from the configured rate at lower speeds.
Rework the computation to follow the hardware rate formula:
rate = 2 * (1 + mantissa/256) * 2^exp / (1 << div_exp)
Keep div_exp = 0 and derive exp and mantissa from half of the requested
rate. Rates below 2 Mbps are floored to the smallest encodable step
(exp = 0, mantissa = 0).
Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Link: https://patch.msgid.link/20260717084349.2227796-1-nshettyj@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9173e1d3c7c7d49a71eee813091f9e834ec7cee5 ]
Credit Based (CB) TSA is not supported by the mlx5 driver, so reject
any configurations that specify it.
Fixes: 08fb1dacdd76 ("net/mlx5e: Support DCBNL IEEE ETS")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260717075125.1244877-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffb1873b2df11945b8c395e859169248675c91c5 ]
The IEEE 802.1Qaz standard defines that bandwidth allocation percentages
only apply to Enhanced Transmission Selection (ETS) traffic classes.
For STRICT and VENDOR transmission selection algorithms, bandwidth
percentage values are not applicable.
Currently for non-ETS 100 bandwidth is being reported for all traffic
classes in the get operation due to hardware limitation, regardless of
their TSA type.
Fix this by reporting 0 for non-ETS traffic classes.
Fixes: 820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260717075125.1244877-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d12956d083eb70f2c6d72711aebaf8c2ce21e170 ]
esw_egress_acl_vlan_create() hardcodes num_dest=0 in its
mlx5_add_flow_rules() call. When invoked from the non-bond path
fwd_dest is NULL and num_dest=0 is correct. When invoked from
esw_acl_egress_ofld_rules_create() during a bond event, fwd_dest is
non-NULL and flow_act.action carries MLX5_FLOW_CONTEXT_ACTION_FWD_DEST,
but _mlx5_add_flow_rules() rejects a non-NULL dest pointer paired with
dest_num<=0 and returns -EINVAL. The error propagates as
"configure slave vport egress fwd, err(-22)". The passive vport's egress
ACL table ends up with its flow groups allocated but no FTEs, so
prio-tagged packets are not popped and bond failover is broken on
prio_tag_required devices.
Fix by passing fwd_dest ? 1 : 0 as num_dest to match the actual number
of destinations supplied.
Fixes: bf773dc0e6d5 ("net/mlx5: E-Switch, Introduce APIs to enable egress acl forward-to-vport rule")
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717073306.1242399-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11c057d23465c7a5817a7284c896d19d54c0b616 ]
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords.
Fixes: 271907ee2f29 ("net/mlx5: Query the maximum MCIA register read size from firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717072338.1240582-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e4c44b12f4da60d3e8dcbc1ccf38bb28a878050 ]
Matthew and Jakub reported [1] issues where inventory automation tools
are calling EEPROM query repeatedly on a port that doesn't have an SFP
connected, resulting in millions of error prints.
Move MCIA register status extraction from the query functions to the
callers, allowing use of extack reporting instead of a dmesg print when
using the netlink API.
[1] https://lore.kernel.org/netdev/20251028194011.39877-1-mattc@purestorage.com/
Cc: Matthew W Carlis <mattc@purestorage.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763415729-1238421-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 11c057d23465 ("net/mlx5: Fix MCIA register buffer overflow on 32 dword reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe0c002928c6749b7f4a726f6f600f6dd70280ea ]
rss_indir_user and rss_hkey_user are allocated and filled in
__set_rss_rxfh() when the user configures RSS via ethtool, but
nothing ever reads them. hinic_get_rxfh() fetches the state from
the device, and the hardware is programmed from the original
indir/key arguments. These buffers only leaked on driver unload.
Drop the unused allocations, memcpys, and struct fields.
Fixes: 4fdc51bb4e92 ("hinic: add support for rss parameters with ethtool")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260722025353.328179-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 543adf072165aaf2e3b635c0476204f9658ed3bf ]
Several fields in struct ppp can be read or updated concurrently
from multiple CPUs without synchronization, causing data races:
1. ppp->mru is read concurrently in ppp_receive_nonmp_frame() while
being updated via PPPIOCSMRU ioctl. Protect ppp->mru updates in
PPPIOCSMRU with ppp_recv_lock(ppp).
2. PPPIOCGFLAGS reads ppp->flags, ppp->xstate, and ppp->rstate
unlocked. Wrap the read in ppp_lock(ppp) to get a consistent
snapshot.
3. ppp->debug is updated via PPPIOCSDEBUG and read concurrently on
fast paths. Annotate reads with READ_ONCE() and writes with
WRITE_ONCE().
4. ppp->last_xmit and ppp->last_recv are updated on TX/RX data paths
and read via PPPIOCGIDLE32 / PPPIOCGIDLE64 ioctls. Annotate with
WRITE_ONCE() / READ_ONCE() and use max() to handle jiffies
subtraction.
5. ppp->npmode[] is updated via PPPIOCSNPMODE and read on TX/RX
paths. Annotate with WRITE_ONCE() / READ_ONCE().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260722101605.2868548-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d4d31e3cc5dd6204fa1495c4107f5075acce5ed ]
When MCAM entries are allocated for a VF netdev via the devlink
mcam_count parameter, only OTX2_FLAG_NTUPLE_SUPPORT was set. That
enabled ethtool ntuple filters but not tc flower offload. Also set
OTX2_FLAG_TC_FLOWER_SUPPORT when entries are successfully allocated.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260715052007.2099851-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c99db3a2080b8c2cbbb1100369586a9bea43321 ]
stmmac_mac_link_down() clears the MAC's transmit and receive enable bits.
stmmac_mac_link_up() is expected to set them again through
stmmac_mac_set(..., true), but it first switches on the negotiated speed
and returns early for a speed the switch does not list. The MAC is then
left gated off.
The speed selection is split into three switches, keyed on the interface.
The generic branch -- taken for everything that is neither USXGMII nor
XLGMII, so including PHY_INTERFACE_MODE_10GBASER -- lists only SPEED_2500,
SPEED_1000, SPEED_100 and SPEED_10.
MGBE on Tegra234 runs 10GBASE-R into an Aquantia AQR113C. That PHY does
rate matching, so phylink_link_up() replaces the media speed with the
MAC-side interface speed before calling into the MAC:
case RATE_MATCH_PAUSE:
speed = phylink_interface_max_speed(link_state.interface);
duplex = DUPLEX_FULL;
The driver is therefore called as
stmmac_mac_link_up(interface=10GBASER, speed=10000, duplex=1)
which falls through to "default: return;". The interface stops passing
traffic after the first link flap.
The failure is easy to misread. The link still comes up, because the PHY
is polled over MDIO and needs no MAC, so the interface reports carrier 1
at the media speed. The DMA is untouched, so its start bits stay set and
descriptors are still consumed. Only the MAC itself is gated off: the
receiver counts nothing (mmc_rx_framecount_gb stops advancing, RE is 0)
and nothing reaches the wire (TE is 0). The interface survives boot only
because stmmac_hw_setup(), called from ndo_open, enables the MAC
unconditionally -- so the problem appears only once the cable has been
unplugged and plugged back in, and "ip link set dev <ethX> down && ip
link set dev <ethX> up" appears to fix it.
The interface is not what the speed bits depend on: with the single
exception of 2.5G, which is selected through the XGMII block on USXGMII
and through the regular speed bits otherwise, each speed maps to one
field of struct mac_link. The per-interface switches are speed
validation, and phylink already validates the speed against
priv->hw->link.caps. So collapse the three switches into one keyed on the
speed alone, keeping the interface test only for the 2.5G case. This
covers 10G on 10GBASE-R, and equally 5G, and 1G/100/10 on USXGMII, all of
which hit "default: return;" today.
A core that does not support a speed leaves the corresponding mac_link
field at 0, and phylink will not offer it that speed in the first place.
For dwxgmac2 at 10G, link.xgmii.speed10000 is XGMAC_CONFIG_SS_10000,
which is 0 and is the correct speed selection for a 10GBASE-R MAC: ctrl
then equals old_ctrl, the register write is skipped, and execution
reaches stmmac_mac_set(..., true).
Log an error in the default case, since a speed with no entry here leaves
the MAC disabled and the symptom does not point at the cause.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support")
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: vadik likholetov <vadikas@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713074911.30090-1-vadikas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a448f821289934b961dd9d8d0beb006cc8937ba2 ]
When deleting an L3/L4 flower filter entry, the action field is not
reset. If a filter was previously configured with a drop action, that
action may persist and affect subsequent filter configurations
unintentionally.
Clear the action field when the filter entry is deleted.
Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260714023716.29865-5-muhammad.nazim.amirul.nazle.asmade@altera.com
Reviewed-by: Jakub Raczynski <j.raczynski@samsung.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
