summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-02-17e1000e: flush all writebacks before unloadJesse Brandeburg1-10/+21
The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-17e1000e: check down flag in tasksJesse Brandeburg1-0/+21
This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-15cxgb4vf: Use defined Mailbox TimeoutCasey Leedom1-1/+1
VF Driver should use mailbox command timeout specified in t4fw_interface.h rather than hard-coded value of 500ms. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15cxgb4vf: Quiesce Virtual Interfaces on shutdown ...Casey Leedom1-0/+41
When a Virtual Machine is rebooted, KVM currently fails to issue a Function Level Reset against any "Attached PCI Devices" (AKA "PCI Passthrough"). In addition to leaving the attached device in a random state in the next booted kernel (which sort of violates the entire idea of a reboot reseting hardware state), this leaves our peer thinking that the link is still up. (Note that a bug has been filed with the KVM folks, #25332, but there's been no response on that as of yet.) So, we add a "->shutdown()" method for the Virtual Function PCI Device to handle administrative shutdowns like a reboot. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ...Casey Leedom1-8/+8
When CONFIG_DEBUG_FS we get "ERR_PTR()"s back from the debugfs routines instead of NULL. Use the right predicates to check for this. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15cxgb4vf: Check driver parameters in the right place ...Casey Leedom1-12/+11
Check module parameter validity in the module initialization routine instead of the PCI Device Probe routine. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15pch_gbe: Fix the MAC Address load issue.Toshiharu Okada2-1/+8
With the specification of hardware, the processing at the time of driver starting was modified. This device write automatically the MAC address read from serial ROM into a MAC Adress1A/1B register at the time of power on reset. However, when stable clock is not supplied, the writing of MAC Adress1A/1B register may not be completed. In this case, it is necessary to load MAC address to MAC Address1A/1B register by the MAC Address1 load register. This patch always does the above processing, in order not to be dependent on system environment. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15iwlwifi: Delete iwl3945_good_plcp_health.David S. Miller1-66/+0
Fixes this build warning: drivers/net/wireless/iwlwifi/iwl-3945.c:411:13: warning: 'iwl3945_good_plcp_health' defined but not used As per Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14Merge branch 'master' of ↵David S. Miller1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-14net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTINGKurt Van Dijck1-1/+1
The statement 'select CAN_SOFTING' may ignore the dependancies for CAN_SOFTING while selecting CAN_SOFTING_CS, as is therefore a bad choice. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14pch_gbe: Fix the issue that the receiving data is not normal.Toshiharu Okada1-42/+55
This PCH_GBE driver had an issue that the receiving data is not normal. This driver had not removed correctly the padding data which the DMA include in receiving data. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14stmmac: enable wol via magic frame by default.Giuseppe Cavallaro1-1/+3
This patch enables it by default when the driver starts. This has been required by many people and seems to actually be useful on STB. At any rate, the WoL modes can be selected and turned-on/off by using the ethtool at run-time by users. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14Net, USB, Option, hso: Do not dereference NULL pointerJesper Juhl1-6/+6
In drivers/net/usb/hso.c::hso_create_bulk_serial_device() we have this code: ... serial = kzalloc(sizeof(*serial), GFP_KERNEL); if (!serial) goto exit; ... exit: hso_free_tiomget(serial); ... hso_free_tiomget() directly dereferences its argument, which in the example above is a NULL pointer, ouch. I could just add a 'if (serial)' test at the 'exit' label, but since most freeing functions in the kernel accept NULL pointers (and it seems like this was also assumed here) I opted to instead change 'hso_free_tiomget()' so that it is safe to call it with a NULL argument. I also modified the function to get rid of a pointles conditional before the call to 'usb_free_urb()' since that function already tests for NULL itself - besides fixing the NULL deref this change also buys us a few bytes in size. Before: $ size drivers/net/usb/hso.o text data bss dec hex filename 32200 592 9960 42752 a700 drivers/net/usb/hso.o After: $ size drivers/net/usb/hso.o text data bss dec hex filename 32196 592 9960 42748 a6fc drivers/net/usb/hso.o Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13USB Network driver infrastructure: Fix leak when usb_autopm_get_interface() ↵Jesper Juhl1-1/+3
returns less than zero in kevent(). We'll leak the memory allocated to 'urb' in drivers/net/usb/usbnet.c:kevent() when we 'goto fail_lowmem' and the 'urb' variable goes out of scope while still completely unused. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10virtio_net: Add schedule check to napi_enable callBruce Rogers1-11/+16
Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by: Bruce Rogers <brogers@novell.com> Signed-off-by: Olaf Kirch <okir@suse.de> Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10pch_can: fix tseg1/tseg2 setting issueTomoya MORINAGA1-2/+2
Previous patch "[PATCH 1/3] pch_can: fix 800k comms issue" is wrong. I should have modified tseg1_min not tseg2_min. This patch reverts tseg2_min to 1 and set tseg1_min to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09can: softing_cs needs slab.hRandy Dunlap1-0/+1
From: Randy Dunlap <randy.dunlap@oracle.com> softing_cs.c uses kzalloc & kfree, so it needs to include linux/slab.h. drivers/net/can/softing/softing_cs.c:234: error: implicit declaration of function 'kfree' drivers/net/can/softing/softing_cs.c:271: error: implicit declaration of function 'kzalloc' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09iwl3945: remove plcp checkStanislaw Gruszka1-1/+0
Patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=654599 Many users report very low speed problem on 3945 devices, this patch fixes problem, but only for some of them. For unknown reason, sometimes after hw scanning, device is not able to receive frames at high rate. Since plcp health check may request hw scan to "reset radio", performance problem start to be observable after update kernel to .35, where plcp check was introduced. Bug reporter confirmed that removing plcp check fixed problem for him. Reported-and-tested-by: SilvioTO <silviotoya@yahoo.it> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtoolToshiharu Okada1-8/+4
This driver will be in a deadlock, When the rx offload is set by ethtool. The pch_gbe_reinit_locked function was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09pch_can: fix module reload issue with MSITomoya1-0/+1
Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09pch_can: fix rmmod issueTomoya1-1/+1
Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09pch_can: fix 800k comms issueTomoya1-1/+1
Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-09USB CDC NCM errata updates for cdc_ncm host driverAlexey Orishko1-80/+147
Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08Merge branch 'master' of ↵David S. Miller8-14/+21
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-2.6
2011-02-08Merge branch 'master' of ↵David S. Miller7-5/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-08ixgbe: update version stringDon Skidmore1-1/+1
This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: cleanup variable initializationDon Skidmore1-1/+1
The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: limit VF access to network trafficAlexander Duyck2-2/+3
This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix for 82599 erratum on Header SplittingDon Skidmore1-2/+9
We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08ixgbe: fix variable set but not used warnings by gcc 4.6Emil Tantilov2-6/+3
Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000: add support for Marvell Alaska M88E1118R PHYFlorian Fainelli2-1/+4
This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08e1000e: tx_timeout should not increment for non-hang eventsJesse Brandeburg1-1/+0
Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-08iwlagn: Re-enable RF_KILL interrupt when downDon Fry1-0/+6
With commit 554d1d027b19265c4aa3f718b3126d2b86e09a08 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-06bnx2x: Duplication in promisc modeVladislav Zolotarov1-9/+23
Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06sis900: Fix mem leak in sis900_rx error pathJesper Juhl1-0/+1
Fix memory leak in error path of sis900_rx(). If we don't do this we'll leak the skb we dev_alloc_skb()'ed just a few lines above when the variable goes out of scope. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06benet: Avoid potential null deref in be_cmd_get_seeprom_data()Ajit Khaparde1-0/+5
Found by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-05ath9k: Fix possible double free of PAPRD skb'sMohammed Shafi Shajakhan3-4/+7
This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05carl9170: fix typo in PS codeChristian Lamparter1-1/+1
This patch fixes a off-by-one bug which bugged the driver's PS-POLL capability. Cc: <stable@kernel.org> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-05net: can: janz-ican3: world-writable sysfs termination fileVasiliy Kulikov1-1/+1
Don't allow everybody to set terminator via sysfs. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-05net: can: at91_can: world-writable sysfs filesVasiliy Kulikov1-1/+1
Don't allow everybody to write to mb0_id file. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04r8169: prevent RxFIFO induced loops in the irq handler.Francois Romieu1-0/+9
While the RxFIFO interruption is masked for most 8168, nothing prevents it to appear in the irq status word. This is no excuse to crash. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
2011-02-04r8169: RxFIFO overflow oddities with 8168 chipsets.Francois Romieu1-9/+21
Some experiment-based action to prevent my 8168 chipsets locking-up hard in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not always mandatory (is it at all ?). - RTL_GIGA_MAC_VER_12 - RTL_GIGA_MAC_VER_25 Missed ~55% packets. Note: - this is an old SiS 965L motherboard - the 8168 chipset emits (lots of) control frames towards the sender - RTL_GIGA_MAC_VER_26 The chipset does not go into a frenzy of mac control pause when it crashes yet but it can still be crashed. It needs more work. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
2011-02-04r8169: use RxFIFO overflow workaround for 8168c chipset.Ivan Vecera1-2/+4
I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts generating RxFIFO overflow errors. The result is an infinite loop in interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11. With the workaround everything goes fine. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com>
2011-02-04niu: Fix races between up/down and get_stats.David S. Miller1-16/+45
As reported by Flavio Leitner, there is no synchronization to protect NIU's get_stats method from seeing a NULL pointer in either np->rx_rings or np->tx_rings. In fact, as far as ->ndo_get_stats is concerned, these values are set completely asynchronously. Flavio attempted to fix this using a RW semaphore, which in fact works most of the time. However, dev_get_stats() can be invoked from non-sleepable contexts in some cases, so this fix doesn't work in all cases. So instead, control the visibility of the np->{rx,tx}_ring pointers when the device is being brough up, and use properties of the device down sequence to our advantage. In niu_get_stats(), return immediately if netif_running() is false. The device shutdown sequence first marks the device as not running (by clearing the __LINK_STATE_START bit), then it performans a synchronize_rcu() (in dev_deactive_many()), and then finally it invokes the driver ->ndo_stop() method. This guarentees that all invocations of niu_get_stats() either see netif_running() as false, or they see the channel pointers before ->ndo_stop() clears them out. If netif_running() is true, protect against startup races by loading the np->{rx,tx}_rings pointer into a local variable, and punting if it is NULL. Use ACCESS_ONCE to prevent the compiler from reloading the pointer on us. Also, during open, control the order in which the pointers and the ring counts become visible globally using SMP write memory barriers. We make sure the np->num_{rx,tx}_rings value is stable and visible before np->{rx,tx}_rings is. Such visibility control is not necessary on the niu_free_channels() side because of the RCU sequencing that happens during device down as described above. We are always guarenteed that all niu_get_stats calls are finished, or will see netif_running() false, by the time ->ndo_stop is invoked. Reported-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03wireless, wl1251: Fix potential NULL pointer dereference in ↵Jesper Juhl1-0/+3
wl1251_op_bss_info_changed() In drivers/net/wireless/wl1251/main.c:wl1251_op_bss_info_changed() we make a call to ieee80211_beacon_get() which may return NULL, but we do not check the return value before dereferencing the pointer. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03atl1c: Add missing PCI device IDChuck Ebbert1-0/+1
Commit 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03iwlagn: overwrite EEPROM chain setting for 6250 devicesWey-Yi Guy1-0/+2
6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-02be2net: remove netif_stop_queue being called before register_netdev.Ajit Khaparde1-2/+0
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02be2net: fix a crash seen during insmod/rmmod testAjit Khaparde1-2/+0
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02bnx2x: multicasts in NPAR modeVladislav Zolotarov1-7/+2
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-06 21:37:13 +0300