summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2010-07-28Merge branch 'master' of ↵David S. Miller12-21/+88
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c Merge bnx2x bug fixes in by hand... :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28ixgbe: potential null dereferenceDan Carpenter1-3/+4
The e_dev_err() macro dereferences "adapter" which is NULL here. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28ks8842: Support DMA when accessed via timberdaleRichard Röjfors1-21/+443
This patch adds support for RX and TX DMA via the DMA API, this is only supported when the KS8842 is accessed via timberdale. There is no support for DMA on the generic bus interface it self, a state machine inside the FPGA is handling RX and TX transfers to/from buffers in the FPGA. The host CPU can do DMA to and from these buffers. The FPGA has to handle the RX interrupts, so these must be enabled in the ks8842 but not in the FPGA. The driver must not disable the RX interrupt that would mean that the data transfers into the FPGA buffers would stop. The host shall not enable TX interrupts since TX is handled by the FPGA, the host is notified by DMA callbacks when transfers are finished. Which DMA channels to use are added as parameters in the platform data struct. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28stmmac: fix automatic PAD/FCS strippingGiuseppe CAVALLARO4-4/+9
For Simple Ethernet frames (802.2 and 802.3) the GMAC Core never strips pad and fcs. This means the ACS has no effect on IPv4/6 frames. The FL bits, in the RDES0, include the FCS so the driver has to remove it in SW. For 802.3 frame format with LLC or LLC-SNAP, when set the ACS bit, the HW strips both PAD and FCS. The FL bits, in the RDES0, actually represents the frame length already stripped. This patch fixes this logic within the device driver that erroneously removed 4byte from 802.3 frames already stripped corrupting the payload. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28stmmac: fix timer setup when use dual mac KconfigGiuseppe CAVALLARO1-1/+0
The driver erroneously sets the tmrate to zero when the TMU initialisation fails. This actually generates problems while using the dual GMAC configuration. With this patch, enabling both the dual gmac and the timer optimisation, the first interface opened will use the tmu channel 2, the second one won't be able to use the timer but will continue to work without mitigating the interrupts by using the external timer (i.e. TMU channel 2). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: update driver version to 1.52.53-3Dmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: Move statistics handling code to bnx2x_stats.*Dmitry Kravkov5-1594/+1647
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: Create separate file for ethtool routinesDmitry Kravkov4-1955/+1986
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: Create bnx2x_cmn.* filesDmitry Kravkov5-2600/+2943
Newly created files have no functionality changes, but includes some functionality from bnx2x_main.c which is common for PF and coming in the future VF driver. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: move global variable load_count to bnx2x.hDmitry Kravkov2-3/+9
This will allow access to this global variable (used in no-mcp mode) from different object files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: store module parameters in driver main structureDmitry Kravkov2-3/+6
Store module parameters during initialization of main driver structure. This will allow access to the parameters from different files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28bnx2x: Create separate folder for bnx2x driverDmitry Kravkov14-6/+12
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28igbvf, ixgbevf: use dev_hw_addr_randomStefan Assmann2-2/+2
Both igbvf and ixgbevf should set addr_assign_type to NET_ADDR_RANDOM so udev creates persistent net rules by matching the device path. Do this by using the dev_hw_addr_random helper function. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28ixgbe: priority tagging FCoE frames without FCoE offloadJohn Fastabend1-21/+24
The DCB user priority for FCoE is available regardless of whether FCoE offload is enabled (IXGBE_FLAG_FCOE_ENABLED bit is set). This allows proper DCB user priority tagging for FCoE traffic on both 82598 and 82599 devices. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27e1000: use netif_<level> instead of netdev_<level>Emil Tantilov3-61/+70
This patch restores the ability to set msglvl through ethtool. The issue was introduced by: commit 675ad47375c76a7c3be4ace9554d92cd55518ced Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27usbnet: use jiffies in schedule_timeout(), not msecsKulikov Vasiliy1-1/+1
usbnet_terminate_urbs() uses schedule_timeout() with argument 3 msecs. schedule_timeout() uses jiffies as argument, so convert msecs to jiffies with msecs_to_jiffies(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ks8842: Support 100Mbps when accessed via timberdaleRichard Röjfors1-5/+10
This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27caif: handle snprintf() returnDan Carpenter1-0/+3
snprintf() returns the number of bytes that would have been written. It can be larger than the size of the buffer. The current code won't overflow, but people cut and paste this stuff so lets do it right and also make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ethoc: add devinit/devexit section initializersJonas Bonn1-4/+4
Signed-off-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27igb: restore EEPROM values of MDICNFG on reset with 82580Nick Nunley2-0/+45
On a reset the MDICNFG.Destination and MDICNFG.COM_MDIO register fields are not restored to the EEPROM default. This patch modifies the reset code to read the EEPROM and restore the default values. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27igb: add support for SGMII-based MDIO PHYsNick Nunley2-17/+75
This patch adds support for external MDIO PHYs, in addition to the standard SFP support for SGMII PHYs over the I2C interface. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27e1000e: Drop a useless statementJean Delvare1-2/+0
err is set again a few lines below. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27s2io: fixing DBG_PRINT() macroBreno Leitao1-1/+1
Patch 9e39f7c5b311a306977c5471f9e2ce4c456aa038 changed the DBG_PRINT() macro and the if clause was wrongly changed. It means that currently all the DBG_PRINT are being printed, flooding the kernel log buffer with things like: s2io: eth6: Next block at: c0000000b9c90000 s2io: eth6: In Neterion Tx routine Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27Merge branch 'master' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-27drivers/net/qla3xxx.c: Checkpatch cleanupsJoe Perches1-484/+459
Remove typedefs Indentation and spacing Use a temporary for a very long pointer variable More 80 column compatible Convert a switch to if/else if Compile tested only, depends on patch "Update logging message style" (old) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 209 errors, 82 warnings, 3995 lines checked (new) $ scripts/checkpatch.pl -f drivers/net/qla3xxx.c | grep "^total:" total: 2 errors, 0 warnings, 3970 lines checked $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.old 49959 212 13728 63899 f99b drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27drivers/net/qla3xxx.c: Update logging message styleJoe Perches1-324/+200
Use pr_<level> Use netdev_<level> Use netif_<level> Remove #define PFX Improve a couple of loops to avoid deep indentation. Compile tested only $ size drivers/net/qla3xxx.o.* text data bss dec hex filename 51603 212 13864 65679 1008f drivers/net/qla3xxx.o.old 50413 212 13864 64489 fbe9 drivers/net/qla3xxx.o.new Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26ath9k: fix dma direction for map/unmap in ath_rx_taskletMing Lei1-2/+2
For edma, we should use DMA_BIDIRECTIONAL, or else use DMA_FROM_DEVICE. This is found to address "BUG at arch/x86/mm/physaddr.c:5" as described here: http://lkml.org/lkml/2010/7/14/21 Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26forcedeth: Fix different hardware statistics versions.Mike Ditto1-29/+31
The macros for the values of the bit field describing the four different versions of statistics supported by different hardware variants were being misused. Where the code was trying to test if the hardware implements V3, it was actually testing whether it implements any of V1, V2, or V3, causing the driver to report statistics that don't really exist in the hardware, with bogus values. Signed-off-by: Mike Ditto <mditto@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26net-next: Fix an overflow bug in vmxnet3 Tx descriptorBhavesh Davda2-6/+11
Fix an overflow bug in vmxnet3 Tx descriptor This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing into the 'gen' bit in the descriptor thereby corrupting the descriptor and stalling the transmit ring. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Matthew Delco <delcoM@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-263c59x: Add ethtool WOL supportAndrew O. Shadoura1-0/+32
This patch adds wrappers for ethtool to get or set wake-on-LAN setting without re-inserting the kernel module. Signed-off-by: Andrew O. Shadoura <andrew@beldisplaytech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26qlcnic: fix diag resource allocationSony Chacko1-0/+1
netif_device_attach missing from error path in qlcnic_diag_alloc_res Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26qlcnic: fix loopback testAmit Kumar Salecha3-22/+8
o Loopback not supported for virtual function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25Merge branch 'wimax-2.6.35.y' of ↵David S. Miller2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-07-25tun: avoid BUG, dump packet on GSO errorsMichael S. Tsirkin1-2/+12
There are still some LRO cards that cause GSO errors in tun, and BUG on this is an unfriendly way to tell the admin to disable LRO. Further, experience shows we might have more GSO bugs lurking. See https://bugzilla.kernel.org/show_bug.cgi?id=16413 as a recent example. dumping a packet will make it easier to figure it out. Replace BUG with warning+dump+drop the packet to make GSO errors in tun less critical and easier to debug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alex Unigovsky <unik@compot.ru> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25ixgbe: fix ethtool statsEric Dumazet1-21/+21
In latest changes about 64bit stats on 32bit arches, [commit 28172739f0a276eb8 (net: fix 64 bit counters on 32 bit arches)], I missed ixgbe uses a bit of magic in its ixgbe_gstrings_stats definition. IXGBE_NETDEV_STAT() must now assume offsets relative to rtnl_link_stats64, not relative do dev->stats. As a bonus, we also get 64bit stats on ethtool -S Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25qlcnic: fix bandwidth checkRajesh Borundia1-4/+3
Fix maximum and minmum bandwith value. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25bonding: set device in RLB ARP packet handlerGreg Edwards1-1/+1
After: commit 6146b1a4da98377e4abddc91ba5856bef8f23f1e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Tue Nov 4 17:51:15 2008 -0800 bonding: Fix ALB mode to balance traffic on VLANs the dev field in the RLB ARP packet handler was set to NULL to wildcard and accommodate balancing VLANs on top of bonds. This has the side-effect of the packet handler being called against other, non RLB-enabled bonds, and a kernel oops results when it tries to dereference rx_hashtbl in rlb_update_entry_from_arp(), which won't be set for those bonds, e.g. active-backup. With the __netif_receive_skb() changes from: commit 1f3c8804acba841b5573b953f5560d2683d2db0d Author: Andy Gospodarek <andy@greyhouse.net> Date: Mon Dec 14 10:48:58 2009 +0000 bonding: allow arp_ip_targets on separate vlans to use arp validation frames received on VLANs correctly make their way to the bond's handler, so we no longer need to wildcard the device. The oops can be reproduced by: modprobe bonding echo active-backup > /sys/class/net/bond0/bonding/mode echo 100 > /sys/class/net/bond0/bonding/miimon ifconfig bond0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth0 > /sys/class/net/bond0/bonding/slaves echo +eth1 > /sys/class/net/bond0/bonding/slaves echo +bond1 > /sys/class/net/bonding_masters echo balance-alb > /sys/class/net/bond1/bonding/mode echo 100 > /sys/class/net/bond1/bonding/miimon ifconfig bond1 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx echo +eth2 > /sys/class/net/bond1/bonding/slaves echo +eth3 > /sys/class/net/bond1/bonding/slaves Pass some traffic on bond0. Boom. [ Tested, behaves as advertised. I do not believe a test of the bonding mode is necessary, as there is no race between the packet handler and the bonding mode changing (the mode can only change when the device is closed). Also updated the log message to include the reproduction and full commit ids. -J ] Signed-off-by: Greg Edwards <greg.edwards@hp.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24Merge branch 'master' of ↵David S. Miller34-2173/+208
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-243c59x: Fix call to mdio_sync() with the wrong argumentBen Hutchings1-1/+1
commit a095cfc40ec7ebe63e9532383c5b5c2a27b14075 "3c59x: Specify window explicitly for access to windowed registers" changed the first parameter to mdio_sync(), from a pointer to the register mapping, to a pointer to the vortex_private structure, and changed all but one of the call sites. Fix that last one. Reported-by: Luca Falavigna <dktrkranz@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24net: s2io: fix buffer overflowKulikov Vasiliy1-10/+18
vpd_data[] is allocated as kmalloc(256, GFP_KERNEL), so if cnt = 255 then (cnt + 3) overflows 256. memset() is executed without checking. vpd_data[cnt+2] must be less than 256-cnt-2 as the latter is number of vpd_data[] elements to copy. Do not fill with zero the beginning of nic->serial_num as it will be filled with vpd_data[]. String in product_name[] should be terminated by '\0'. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24mv643xx_eth: potential null dereferenceDan Carpenter1-1/+2
We assume that "pd" can be null on the previous line, and throughout the function so we should check it here as well. This was introduced by 9b2c2ff7a1c0 "mv643xx_eth: use sw csum for big packets" Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24net: 3c59x: fix leak of iomapsKulikov Vasiliy1-0/+1
If vortex_probe1() fails we should unmap ioaddr mapped earlier. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23wireless: use newly introduced hex_to_bin()Andy Shevchenko1-21/+2
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Corey Thomas <coreythomas@charter.net> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23usb: usbnet: use newly introduced hex_to_bin()Andy Shevchenko1-11/+2
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-usb@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23drivers: net: use newly introduced hex_to_bin()Andy Shevchenko1-6/+5
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: bump the driver version numberAjit Khaparde1-1/+1
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: variable name changesAjit Khaparde4-8/+8
This patch changes names of some variables. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: supress printing error when mac query fails for VFAjit Khaparde1-1/+2
When a virtual function driver in initialized, the network mac query command can fail. Skip display of error message in that case. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: code to support tx rate configuration on virtual functionsAjit Khaparde4-1/+78
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: add vlan support for sriov virtual functionsAjit Khaparde2-8/+47
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 01:46:59 +0300