summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-02-01net: mdio-mux-meson-g12a: force internal PHY off on mux switchJerome Brunet1-7/+16
[ Upstream commit 7083df59abbc2b7500db312cac706493be0273ff ] Force the internal PHY off then on when switching to the internal path. This fixes problems where the PHY ID is not properly set. Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01tsnep: Fix TX queue stop/wake for multiple queuesGerhard Engleder1-6/+9
[ Upstream commit 3d53aaef4332245044b2f3688ac0ea10436c719c ] netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok as long as only a single TX queue is supported. But support for multiple TX queues was introduced with 762031375d5c and I missed to adapt stop and wake of TX queues. Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific TX queue. Fixes: 762031375d5c ("tsnep: Support multiple TX/RX queue pairs") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/tg3: resolve deadlock in tg3_reset_task() during EEHDavid Christensen1-4/+4
[ Upstream commit 6c4ca03bd890566d873e3593b32d034bf2f5a087 ] During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf43ef23 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: ravb: Fix possible hang if RIS2_QFF1 happenYoshihiro Shimoda1-2/+2
[ Upstream commit f3c07758c9007a6bfff5290d9e19d3c41930c897 ] Since this driver enables the interrupt by RIC2_QFE1, this driver should clear the interrupt flag if it happens. Otherwise, the interrupt causes to hang the system. Note that this also fix a minor coding style (a comment indentation) around the fixed code. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: ravb: Fix lack of register setting after system resumed for Gen3Yoshihiro Shimoda1-0/+6
[ Upstream commit c2b6cdee1d13ffbb24baca3c9b8a572d6b541e4e ] After system entered Suspend to RAM, registers setting of this hardware is reset because the SoC will be turned off. On R-Car Gen3 (info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So, after system resumed, it lacks of the initial settings for ptp. So, add ravb_ptp_{init,stop}() into ravb_{resume,suspend}(). Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: ethernet: adi: adin1110: Fix multicast offloadingAlexandru Tachici1-1/+1
[ Upstream commit 8a4f6d023221c4b052ddfa1db48b27871bad6e96 ] Driver marked broadcast/multicast frames as offloaded incorrectly. Mark them as offloaded only when HW offloading has been enabled. This should happen only for ADIN2111 when both ports are bridged by the software. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: dsa: microchip: fix probe of I2C-connected KSZ8563Ahmad Fatoum1-1/+1
[ Upstream commit 360fdc999d92db4a4adbba0db8641396dc9f1b13 ] Starting with commit eee16b147121 ("net: dsa: microchip: perform the compatibility check for dev probed"), the KSZ switch driver now bails out if it thinks the DT compatible doesn't match the actual chip ID read back from the hardware: ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found KSZ8563, please fix it! For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine at first, because it indeed shares the same chip id as the KSZ9893. Commit b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893 compatible chips by consulting the 0x1F register. The resulting breakage was fixed for the SPI driver in the same commit by introducing the appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver. Fix this for I2C-connected KSZ8563 now to get it probing again. Fixes: b44908095612 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip"). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: fec: Use page_pool_put_full_page when freeing rx buffersWei Fang1-1/+1
[ Upstream commit e38553bdc377e3e7a6caa9dd9770d8b644d8dac3 ] The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec [ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec [ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec [ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0 [ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1 [ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT) [ 1537.115561] Call trace: [ 1537.118005] dump_backtrace.part.0+0xe0/0xf0 [ 1537.122289] show_stack+0x18/0x40 [ 1537.125608] dump_stack_lvl+0x64/0x80 [ 1537.129276] dump_stack+0x18/0x34 [ 1537.132592] dump_header+0x44/0x208 [ 1537.136083] oom_kill_process+0x2b4/0x2c0 [ 1537.140097] out_of_memory+0xe4/0x594 [ 1537.143766] __alloc_pages+0xb68/0xd00 [ 1537.147521] alloc_pages+0xac/0x160 [ 1537.151013] __get_free_pages+0x14/0x40 [ 1537.154851] pgd_alloc+0x1c/0x30 [ 1537.158082] mm_init+0xf8/0x1d0 [ 1537.161228] mm_alloc+0x48/0x60 [ 1537.164368] alloc_bprm+0x7c/0x240 [ 1537.167777] do_execveat_common.isra.0+0x70/0x240 [ 1537.172486] __arm64_sys_execve+0x40/0x54 [ 1537.176502] invoke_syscall+0x48/0x114 [ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec [ 1537.184964] do_el0_svc+0x2c/0xd0 [ 1537.188280] el0_svc+0x2c/0x84 [ 1537.191340] el0t_64_sync_handler+0xf4/0x120 [ 1537.195613] el0t_64_sync+0x18c/0x190 [ 1537.199334] Mem-Info: [ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0 [ 1537.201620] active_file:54 inactive_file:112 isolated_file:0 [ 1537.201620] unevictable:0 dirty:0 writeback:0 [ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076 [ 1537.201620] mapped:1489 shmem:2473 pagetables:466 [ 1537.201620] sec_pagetables:0 bounce:0 [ 1537.201620] kernel_misc_reclaimable:0 [ 1537.201620] free:136672 free_pcp:96 free_cma:129241 [ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s [ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB [ 1537.300219] lowmem_reserve[]: 0 0 0 0 [ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB [ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB [ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB [ 1537.358087] 2939 total pagecache pages [ 1537.361876] 0 pages in swap cache [ 1537.365229] Free swap = 0kB [ 1537.368147] Total swap = 0kB [ 1537.371065] 516096 pages RAM [ 1537.373959] 0 pages HighMem/MovableOnly [ 1537.377834] 17302 pages reserved [ 1537.381103] 163840 pages cma reserved [ 1537.384809] 0 pages hwpoisoned [ 1537.387902] Tasks state (memory values in pages): [ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind [ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal [ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd [ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn [ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd [ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond [ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon [ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared [ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod [ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec [ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd [ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind [ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant [ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network [ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand [ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon [ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon [ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd [ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod [ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc [ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd [ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty [ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login [ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant [ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd [ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd [ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam) [ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh [ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh [ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor [ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor [ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor [ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh [ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0 [ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0 [ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: shenwei wang <Shenwei.wang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01iavf: schedule watchdog immediately when changing primary MACStefan Assmann1-1/+1
[ Upstream commit e2b53ea5a7c1fb484277ad12cd075f502cf03b04 ] iavf_replace_primary_mac() utilizes queue_work() to schedule the watchdog task but that only ensures that the watchdog task is queued to run. To make sure the watchdog is executed asap use mod_delayed_work(). Without this patch it may take up to 2s until the watchdog task gets executed, which may cause long delays when setting the MAC address. Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01iavf: fix temporary deadlock and failure to set MAC addressMichal Schmidt4-51/+49
[ Upstream commit 4411a608f7c8df000cb1a9f7881982dd8e10839a ] We are seeing an issue where setting the MAC address on iavf fails with EAGAIN after the 2.5s timeout expires in iavf_set_mac(). There is the following deadlock scenario: iavf_set_mac(), holding rtnl_lock, waits on: iavf_watchdog_task (within iavf_wq) to send a message to the PF, and iavf_adminq_task (within iavf_wq) to receive a response from the PF. In this adapter state (>=__IAVF_DOWN), these tasks do not need to take rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they may get stuck waiting for another adapter's iavf_watchdog_task to run iavf_init_config_adapter(), which does take rtnl_lock. The deadlock resolves itself by the timeout in iavf_set_mac(), which results in EAGAIN returned to userspace. Let's break the deadlock loop by changing iavf_wq into a per-adapter workqueue, so that one adapter's tasks are not blocked by another's. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: mana: Fix IRQ name - add PCI and queue numberHaiyang Zhang2-1/+11
[ Upstream commit 20e3028c39a5bf882e91e717da96d14f1acec40e ] The PCI and queue number info is missing in IRQ names. Add PCI and queue number to IRQ names, to allow CPU affinity tuning scripts to work. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/1674161950-19708-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara1-0/+1
[ Upstream commit be53771c87f4e322a9835d3faa9cd73a4ecdec5b ] The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modemHui Wang1-0/+6
[ Upstream commit eea8ce81fbb544e3caad1a1c876ba1af467b3d3c ] This modem has 7 interfaces, 5 of them are serial interfaces and are driven by cdc_acm, while 2 of them are wwan interfaces and are driven by cdc_ether: If 0: Abstract (modem) If 1: Abstract (modem) If 2: Abstract (modem) If 3: Abstract (modem) If 4: Abstract (modem) If 5: Ethernet Networking If 6: Ethernet Networking Without this change, the 2 network interfaces will be named to usb0 and usb1, our QA think the names are confusing and filed a bug on it. After applying this change, the name will be wwan0 and wwan1, and they could work well with modem manager. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01bnxt: Do not read past the end of test namesKees Cook2-17/+5
[ Upstream commit d3e599c090fc6977331150c5f0a69ab8ce87da21 ] Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: stmmac: enable all safety features by defaultAndrew Halaney1-0/+14
[ Upstream commit fdfc76a116b5e9d3e98e6c96fe83b42d011d21d4 ] In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: dsa: microchip: ksz9477: port map correction in ALU table entry registerRakesh Sankaranarayanan1-2/+2
[ Upstream commit 6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b ] ALU table entry 2 register in KSZ9477 have bit positions reserved for forwarding port map. This field is referred in ksz9477_fdb_del() for clearing forward port map and alu table. But current fdb_del refer ALU table entry 3 register for accessing forward port map. Update ksz9477_fdb_del() to get forward port map from correct alu table entry register. With this bug, issue can be observed while deleting static MAC entries. Delete any specific MAC entry using "bridge fdb del" command. This should clear all the specified MAC entries. But it is observed that entries with self static alone are retained. Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across LAN937x and KSZ series. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01virtio-net: correctly enable callback during start_xmitJason Wang1-2/+4
[ Upstream commit d71ebe8114b4bf622804b810f5e274069060a174 ] Commit a7766ef18b33("virtio_net: disable cb aggressively") enables virtqueue callback via the following statement: do { if (use_napi) virtqueue_disable_cb(sq->vq); free_old_xmit_skbs(sq, false); } while (use_napi && kick && unlikely(!virtqueue_enable_cb_delayed(sq->vq))); When NAPI is used and kick is false, the callback won't be enabled here. And when the virtqueue is about to be full, the tx will be disabled, but we still don't enable tx interrupt which will cause a TX hang. This could be observed when using pktgen with burst enabled. TO be consistent with the logic that tries to disable cb only for NAPI, fixing this by trying to enable delayed callback only when NAPI is enabled when the queue is about to be full. Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively") Signed-off-by: Jason Wang <jasowang@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: macb: fix PTP TX timestamp failure due to packet paddingRobert Hancock1-8/+1
[ Upstream commit 7b90f5a665acd46efbbfa677a3a3a18d01ad6487 ] PTP TX timestamp handling was observed to be broken with this driver when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving the expected TX timestamp after transmitting a packet, causing it to enter a failure state. The problem appears to be due to the way that the driver pads packets which are smaller than the Ethernet minimum of 60 bytes. If headroom space was available in the SKB, this caused the driver to move the data back to utilize it. However, this appears to cause other data references in the SKB to become inconsistent. In particular, this caused the ptp_one_step_sync function to later (in the TX completion path) falsely detect the packet as a one-step SYNC packet, even when it was not, which caused the TX timestamp to not be processed when it should be. Using the headroom for this purpose seems like an unnecessary complexity as this is not a hot path in the driver, and in most cases it appears that there is sufficient tailroom to not require using the headroom anyway. Remove this usage of headroom to prevent this inconsistency from occurring and causing other problems. Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: mlx5: eliminate anonymous module_init & module_exitRandy Dunlap1-4/+4
[ Upstream commit 2c1e1b949024989e20907b84e11a731a50778416 ] Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eli Cohen <eli@mellanox.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/mlx5: E-switch, Fix switchdev mode after devlink reloadChris Mi1-0/+1
[ Upstream commit 7c83d1f4c5adae9583e7fca1e3e830d6b061522d ] The cited commit removes eswitch mode none. So after devlink reload in switchdev mode, eswitch mode is not changed. But actually eswitch is disabled during devlink reload. Fix it by setting eswitch mode to legacy when disabling eswitch which is called by reload_down. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/mlx5e: Set decap action based on attr for sampleChris Mi1-3/+2
[ Upstream commit ffa99b534732f90077f346c62094cab3d1ccddce ] Currently decap action is set based on tunnel_id. That means it is set unconditionally. But for decap, ct and sample actions, decap is done before ct. No need to decap again in sample. And the actions are set correctly when parsing. So set decap action based on attr instead of tunnel_id. Fixes: 2741f2230905 ("net/mlx5e: TC, Support sample offload action for tunneled traffic") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/mlx5e: QoS, Fix wrongfully setting parent_element_id on ↵Maor Dickman3-5/+4
MODIFY_SCHEDULING_ELEMENT [ Upstream commit 4ddf77f9bc76092d268bd3af447d60d9cc62b652 ] According to HW spec parent_element_id field should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command. This patch remove the wrong initialization of reserved field, parent_element_id, on mlx5_qos_update_node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENTMaor Dickman1-15/+3
[ Upstream commit f51471d1935ce1f504fce6c115ce3bfbc32032b0 ] According to HW spec element_type, element_attributes and parent_element_id fields should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command. This patch remove initialization of these fields when calling the command. Fixes: bd77bf1cb595 ("net/mlx5: Add SRIOV VF max rate configuration support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net/mlx5e: Avoid false lock dependency warning on tc_ht even moreVlad Buslov1-0/+3
[ Upstream commit 5aa56105930374928d567744595fd7ac525d0688 ] The cited commit changed class of tc_ht internal mutex in order to avoid false lock dependency with fs_core node and flow_table hash table structures. However, hash table implementation internally also includes a workqueue task with its own lockdep map which causes similar bogus lockdep splat[0]. Fix it by also adding dedicated class for hash table workqueue work structure of tc_ht. [0]: [ 1139.672465] ====================================================== [ 1139.673552] WARNING: possible circular locking dependency detected [ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted [ 1139.675734] ------------------------------------------------------ [ 1139.676801] modprobe/5998 is trying to acquire lock: [ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.679662] but task is already holding lock: [ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.682223] which lock already depends on the new lock. [ 1139.683640] the existing dependency chain (in reverse order) is: [ 1139.684887] -> #2 (&tc_ht_lock_key){+.+.}-{3:3}: [ 1139.685975] __mutex_lock+0x12c/0x14b0 [ 1139.686659] rht_deferred_worker+0x35/0x1540 [ 1139.687405] process_one_work+0x7c2/0x1310 [ 1139.688134] worker_thread+0x59d/0xec0 [ 1139.688820] kthread+0x28f/0x330 [ 1139.689444] ret_from_fork+0x1f/0x30 [ 1139.690106] -> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}: [ 1139.691250] __flush_work+0xe8/0x900 [ 1139.691915] __cancel_work_timer+0x2ca/0x3f0 [ 1139.692655] rhashtable_free_and_destroy+0x22/0x6f0 [ 1139.693472] del_sw_flow_table+0x22/0xb0 [mlx5_core] [ 1139.694592] tree_put_node+0x24c/0x450 [mlx5_core] [ 1139.695686] tree_remove_node+0x6e/0x100 [mlx5_core] [ 1139.696803] mlx5_destroy_flow_table+0x187/0x690 [mlx5_core] [ 1139.698017] mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core] [ 1139.699217] mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core] [ 1139.700397] mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core] [ 1139.701571] mlx5e_suspend+0xdb/0x140 [mlx5_core] [ 1139.702665] mlx5e_remove+0x89/0x190 [mlx5_core] [ 1139.703756] auxiliary_bus_remove+0x52/0x70 [ 1139.704492] device_release_driver_internal+0x3c1/0x600 [ 1139.705360] bus_remove_device+0x2a5/0x560 [ 1139.706080] device_del+0x492/0xb80 [ 1139.706724] mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core] [ 1139.707961] mlx5_unregister_device+0x7a/0xa0 [mlx5_core] [ 1139.709138] mlx5_uninit_one+0x5f/0x160 [mlx5_core] [ 1139.710252] remove_one+0xd1/0x160 [mlx5_core] [ 1139.711297] pci_device_remove+0x96/0x1c0 [ 1139.722721] device_release_driver_internal+0x3c1/0x600 [ 1139.723590] unbind_store+0x1b1/0x200 [ 1139.724259] kernfs_fop_write_iter+0x348/0x520 [ 1139.725019] vfs_write+0x7b2/0xbf0 [ 1139.725658] ksys_write+0xf3/0x1d0 [ 1139.726292] do_syscall_64+0x3d/0x90 [ 1139.726942] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.727769] -> #0 (&node->lock){++++}-{3:3}: [ 1139.728698] __lock_acquire+0x2cf5/0x62f0 [ 1139.729415] lock_acquire+0x1c1/0x540 [ 1139.730076] down_write+0x8e/0x1f0 [ 1139.730709] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.731841] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.732982] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.734207] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.735491] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.736716] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.738007] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.739213] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.740377] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.741534] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.742351] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.743512] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.744683] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.745860] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.747098] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.748372] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.749590] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.750813] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.752147] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.753293] auxiliary_bus_remove+0x52/0x70 [ 1139.754028] device_release_driver_internal+0x3c1/0x600 [ 1139.754885] driver_detach+0xc1/0x180 [ 1139.755553] bus_remove_driver+0xef/0x2e0 [ 1139.756260] auxiliary_driver_unregister+0x16/0x50 [ 1139.757059] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.758207] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.759295] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.760384] __x64_sys_delete_module+0x2b5/0x450 [ 1139.761166] do_syscall_64+0x3d/0x90 [ 1139.761827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.762663] other info that might help us debug this: [ 1139.763925] Chain exists of: &node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key [ 1139.765743] Possible unsafe locking scenario: [ 1139.766688] CPU0 CPU1 [ 1139.767399] ---- ---- [ 1139.768111] lock(&tc_ht_lock_key); [ 1139.768704] lock((work_completion)(&ht->run_work)); [ 1139.769869] lock(&tc_ht_lock_key); [ 1139.770770] lock(&node->lock); [ 1139.771326] *** DEADLOCK *** [ 1139.772345] 2 locks held by modprobe/5998: [ 1139.772994] #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 1139.774399] #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.775822] stack backtrace: [ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 [ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1139.779529] Call Trace: [ 1139.779992] <TASK> [ 1139.780409] dump_stack_lvl+0x57/0x7d [ 1139.781015] check_noncircular+0x278/0x300 [ 1139.781687] ? print_circular_bug+0x460/0x460 [ 1139.782381] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1139.783121] ? lock_release+0x487/0x7c0 [ 1139.783759] ? orc_find.part.0+0x1f1/0x330 [ 1139.784423] ? mark_lock.part.0+0xef/0x2fc0 [ 1139.785091] __lock_acquire+0x2cf5/0x62f0 [ 1139.785754] ? register_lock_class+0x18e0/0x18e0 [ 1139.786483] lock_acquire+0x1c1/0x540 [ 1139.787093] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.788195] ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 [ 1139.788978] ? register_lock_class+0x18e0/0x18e0 [ 1139.789715] down_write+0x8e/0x1f0 [ 1139.790292] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.791380] ? down_write_killable+0x220/0x220 [ 1139.792080] ? find_held_lock+0x2d/0x110 [ 1139.792713] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.793795] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.794879] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.796032] ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core] [ 1139.797227] ? xa_load+0x11a/0x200 [ 1139.797800] ? __xa_clear_mark+0xf0/0xf0 [ 1139.798438] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.799660] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.800821] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.802049] ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core] [ 1139.803260] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.804398] ? __cancel_work_timer+0x1c2/0x3f0 [ 1139.805099] ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core] [ 1139.806387] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.807481] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.808564] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.810455] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.811552] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.812655] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.813768] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.814952] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.816166] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.817336] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.818507] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.819788] ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core] [ 1139.821051] ? kernfs_find_ns+0x137/0x310 [ 1139.821705] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.822778] auxiliary_bus_remove+0x52/0x70 [ 1139.823449] device_release_driver_internal+0x3c1/0x600 [ 1139.824240] driver_detach+0xc1/0x180 [ 1139.824842] bus_remove_driver+0xef/0x2e0 [ 1139.825504] auxiliary_driver_unregister+0x16/0x50 [ 1139.826245] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.827322] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.828345] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.829382] __x64_sys_delete_module+0x2b5/0x450 [ 1139.830119] ? module_flags+0x300/0x300 [ 1139.830750] ? task_work_func_match+0x50/0x50 [ 1139.831440] ? task_work_cancel+0x20/0x20 [ 1139.832088] ? lockdep_hardirqs_on_prepare+0x273/0x3f0 [ 1139.832873] ? syscall_enter_from_user_mode+0x1d/0x50 [ 1139.833661] ? trace_hardirqs_on+0x2d/0x100 [ 1139.834328] do_syscall_64+0x3d/0x90 [ 1139.834922] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.835700] RIP: 0033:0x7f153e71288b [ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48 [ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b [ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288 [ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000 [ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288 [ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8 Fixes: 9ba33339c043 ("net/mlx5e: Avoid false lock depenency warning on tc_ht") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: ipa: disable ipa interrupt during suspendCaleb Connolly3-0/+43
[ Upstream commit 9ec9b2a30853ba843b70ea16f196e5fe3327be5f ] The IPA interrupt can fire when pm_runtime is disabled due to it racing with the PM suspend/resume code. This causes a splat in the interrupt handler when it tries to call pm_runtime_get(). Explicitly disable the interrupt in our ->suspend callback, and re-enable it in ->resume to avoid this. If there is an interrupt pending it will be handled after resuming. The interrupt is a wake_irq, as a result even when disabled if it fires it will cause the system to wake from suspend as well as cancel any suspend transition that may be in progress. If there is an interrupt pending, the ipa_isr_thread handler will be called after resuming. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: stmmac: fix invalid call to mdiobus_get_phy()Heiner Kallweit1-0/+5
[ Upstream commit 1f3bd64ad921f051254591fbed04fd30b306cde6 ] In a number of cases the driver assigns a default value of -1 to priv->plat->phy_addr. This may result in calling mdiobus_get_phy() with addr parameter being -1. Therefore check for this scenario and bail out before calling mdiobus_get_phy(). Fixes: 42e87024f727 ("net: stmmac: Fix case when PHY handle is not present") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: mdio: validate parameter addr in mdiobus_get_phy()Heiner Kallweit1-1/+6
[ Upstream commit 867dbe784c5010a466f00a7d1467c1c5ea569c75 ] The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it. Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: usb: sr9700: Handle negative lenSzymon Heidrich1-1/+1
[ Upstream commit ecf7cf8efb59789e2b21d2f9ab926142579092b2 ] Packet len computed as difference of length word extracted from skb data and four may result in a negative value. In such case processing of the buffer should be interrupted rather than setting sr_skb->len to an unexpectedly large value (due to cast from signed to unsigned integer) and passing sr_skb to usbnet_skb_return. Fixes: e9da0b56fe27 ("sr9700: sanity check for packet length") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: stmmac: Fix queue statistics readingKurt Kanzenbach1-4/+4
[ Upstream commit c296c77efb66994d94d9f706446a115581226550 ] Correct queue statistics reading. All queue statistics are stored as unsigned long values. The retrieval for ethtool fetches these values as u64. However, on some systems the size of the counters are 32 bit. That yields wrong queue statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by using the correct data type. Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short period of time: Non-patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 3775276254951 # ??? | q0_tx_irq_n: 879 | q0_rx_pkt_n: 1194000908909 # ??? | q0_rx_irq_n: 278 Patched kernel: |root@st1:~# ethtool -S eth0 | grep q0 | q0_tx_pkt_n: 2434 | q0_tx_irq_n: 1274 | q0_rx_pkt_n: 1604 | q0_rx_irq_n: 846 Fixes: 68e9c5dee1cf ("net: stmmac: add ethtool per-queue statistic framework") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oidSzymon Heidrich1-13/+6
[ Upstream commit b870e73a56c4cccbec33224233eaf295839f228c ] Since resplen and respoffs are signed integers sufficiently large values of unsigned int len and offset members of RNDIS response will result in negative values of prior variables. This may be utilized to bypass implemented security checks to either extract memory contents by manipulating offset or overflow the data buffer via memcpy by manipulating both offset and len. Additionally assure that sum of resplen and respoffs does not overflow so buffer boundaries are kept. Fixes: 80f8c5b434f9 ("rndis_wlan: copy only useful data from rndis_command respond") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: lan966x: add missing fwnode_handle_put() for ports nodeClément Léger1-5/+8
[ Upstream commit 925f3deb45df73173a33e1e81db77575f4ffde39 ] Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: enetc: avoid deadlock in enetc_tx_onestep_tstamp()Vladimir Oltean1-2/+2
[ Upstream commit 3c463721a73bdb57a913e0d3124677a3758886fc ] This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regsEsina Ekaterina1-2/+4
[ Upstream commit 488e0bf7f34af3d42d1d5e56f7a5a7beaff188a3 ] If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01amd-xgbe: Delay AN timeout during KR trainingRaju Rangoju2-0/+26
[ Upstream commit 926446ae24c03311a480fb96eb78f0ce7ea6d091 ] AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01amd-xgbe: TX Flow Ctrl Registers are h/w ver dependentRaju Rangoju1-8/+15
[ Upstream commit 579923d84b04abb6cd4cd1fd9974096a2dd1832b ] There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()Yang Yingliang1-0/+1
commit 90e7cb78b81543998217b0eb446c067ce2191a79 upstream. Add missing mutex_unlock() before returning from mlx5_fw_fatal_reporter_err_work(). Fixes: 9078e843efec ("net/mlx5: Avoid recovery in probe flows") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rtKevin Hao2-9/+4
commit 55ba18dc62deff5910c0fa64486dea1ff20832ff upstream. The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b678e95 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places. Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24octeontx2-pf: Avoid use of GFP_KERNEL in atomic contextGeetha sowjanya1-2/+2
commit 87b93b678e95c7d93fe6a55b0e0fbda26d8c7760 upstream. Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91c606 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done. Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24wifi: brcmfmac: fix regression for Broadcom PCIe wifi devicesArend van Spriel1-1/+1
commit ed05cb177ae5cd7f02f1d6e7706ba627d30f1696 upstream. A sanity check was introduced considering maximum flowrings above 256 as insane and effectively aborting the device probe. This resulted in regression for number of users as the value turns out to be sane after all. Fixes: 2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle") Reported-by: chainofflowers <chainofflowers@posteo.net> Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/ Reported-by: Christian Marillat <marillat@debian.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894 Cc: stable@vger.kernel.org Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-24r8169: fix dmar pte write access is not set errorChunhao Lin1-7/+7
[ Upstream commit bb41c13c05c23d9bc46b4e37d8914078c6a40e3a ] When close device, if wol is enabled, rx will be enabled. When open device it will cause rx packet to be dma to the wrong memory address after pci_set_master() and system log will show blow messages. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr ffdd4000 [fault reason 05] PTE Write access is not set In this patch, driver disable tx/rx when close device. If wol is enabled, only enable rx filter and disable rxdv_gate(if support) to let hardware only receive packet to fifo but not to dma it. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()Chunhao Lin1-22/+22
[ Upstream commit ad425666a1f05d9b215a84cf010c3789b2ea8206 ] There is no functional change. Moving these two functions for following patch "r8169: fix dmar pte write access is not set error". Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24net: ethernet: marvell: octeontx2: Fix uninitialized variable warningAnuradha Weeraman1-1/+1
[ Upstream commit d3805695fe1e7383517903715cefc9bbdcffdc90 ] Fix for uninitialized variable warning. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Anuradha Weeraman <anuradha@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-24wifi: iwlwifi: fw: skip PPAG for JFJohannes Berg1-0/+5
[ Upstream commit 1c4c0b28b517d778d37900deedfe91088839f07a ] For JF RFs we don't support PPAG, but many firmware images lie about it. Always skip support for JF to avoid firmware errors when sending the command. Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18bnxt: make sure we return pages to the poolJakub Kicinski1-2/+2
[ Upstream commit 97f5e03a4a27d27ee4fed0cdb1658c81cf2784db ] Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net: hns3: fix wrong use of rss size during VF rss configJie Wang1-1/+1
[ Upstream commit ae9f29fdfd827ad06c1ae8155c042245a9d00757 ] Currently, it used old rss size to get current tc mode. As a result, the rss size is updated, but the tc mode is still configured based on the old rss size. So this patch fixes it by using the new rss size in both process. Fixes: 93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()Clément Léger1-0/+3
[ Upstream commit b0e380b5d4275299adf43e249f18309331b6f54f ] If ptp was not enabled due to missing IRQ for instance, lan966x_ptp_deinit() will dereference NULL pointers. Fixes: d096459494a8 ("net: lan966x: Add support for ptp clocks") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18igc: Fix PPS delta between two synchronized end-pointsChristopher S Hall2-4/+8
[ Upstream commit 5e91c72e560cc85f7163bbe3d14197268de31383 ] This patch fix the pulse per second output delta between two synchronized end-points. Based on Intel Discrete I225 Software User Manual Section 4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and ST1[Bit 7] must be set to ensure that clock output will be toggles based on frequency value defined. This is to ensure that output of the PPS is aligned with the clock. How to test: 1) Running time synchronization on both end points. Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name> 2) Configure PPS output using below command for both end-points Ex: SDP0 on I225 REV4 SKU variant ./testptp -d /dev/ptp0 -L 0,2 ./testptp -d /dev/ptp0 -p 1000000000 3) Measure the output using analyzer for both end-points Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225") Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18octeontx2-pf: Fix resource leakage in VF driver unbindHariprasad Kelam1-0/+2
[ Upstream commit 53da7aec32982f5ee775b69dce06d63992ce4af3 ] resources allocated like mcam entries to support the Ntuple feature and hash tables for the tc feature are not getting freed in driver unbind. This patch fixes the issue. Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net/mlx5e: Fix macsec possible null dereference when updating MAC security ↵Emeel Hakim1-7/+2
entity (SecY) [ Upstream commit 9828994ac492e8e7de47fe66097b7e665328f348 ] Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net/mlx5e: Fix macsec ssci attribute handling in offload pathEmeel Hakim1-3/+7
[ Upstream commit f5e1ed04aa2ea665a796f0109091ca3f2b01024a ] Currently when macsec offload is set with extended packet number (epn) enabled, the driver wrongly deduce the short secure channel identifier (ssci) from the salt instead of the stand alone ssci attribute as it should, consequently creating a mismatch between the kernel and driver's ssci values. Fix by using the ssci value from the relevant attribute. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-23 06:50:57 +0300