summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-12-31igc: Enhance Qbv scheduling by using first flag bitVinicius Costa Gomes3-29/+151
[ Upstream commit db0b124f02ba68de6517ac303d431af220ccfe9f ] The I225 hardware has a limitation that packets can only be scheduled in the [0, cycle-time] interval. So, scheduling a packet to the start of the next cycle doesn't usually work. To overcome this, we use the Transmit Descriptor first flag to indicates that a packet should be the first packet (from a queue) in a cycle according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle in Intel Discrete I225/6 User Manual. But this only works if there was any packet from that queue during the current cycle, to avoid this issue, we issue an empty packet if that's not the case. Also require one more descriptor to be available, to take into account the empty packet that might be issued. Test Setup: Talker: Use l2_tai to generate the launchtime into packet load. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Test Result: Before: 1666000610127300000,1666000610127300096,96,621273 1666000610127400000,1666000610127400192,192,621274 1666000610127500000,1666000610127500032,32,621275 1666000610127600000,1666000610127600128,128,621276 1666000610127700000,1666000610127700224,224,621277 1666000610127800000,1666000610127800064,64,621278 1666000610127900000,1666000610127900160,160,621279 1666000610128000000,1666000610128000000,0,621280 1666000610128100000,1666000610128100096,96,621281 1666000610128200000,1666000610128200192,192,621282 1666000610128300000,1666000610128300032,32,621283 1666000610128400000,1666000610128301056,-98944,621284 1666000610128500000,1666000610128302080,-197920,621285 1666000610128600000,1666000610128302848,-297152,621286 1666000610128700000,1666000610128303872,-396128,621287 1666000610128800000,1666000610128304896,-495104,621288 1666000610128900000,1666000610128305664,-594336,621289 1666000610129000000,1666000610128306688,-693312,621290 1666000610129100000,1666000610128307712,-792288,621291 1666000610129200000,1666000610128308480,-891520,621292 1666000610129300000,1666000610128309504,-990496,621293 1666000610129400000,1666000610128310528,-1089472,621294 1666000610129500000,1666000610128311296,-1188704,621295 1666000610129600000,1666000610128312320,-1287680,621296 1666000610129700000,1666000610128313344,-1386656,621297 1666000610129800000,1666000610128314112,-1485888,621298 1666000610129900000,1666000610128315136,-1584864,621299 1666000610130000000,1666000610128316160,-1683840,621300 1666000610130100000,1666000610128316928,-1783072,621301 1666000610130200000,1666000610128317952,-1882048,621302 1666000610130300000,1666000610128318976,-1981024,621303 1666000610130400000,1666000610128319744,-2080256,621304 1666000610130500000,1666000610128320768,-2179232,621305 1666000610130600000,1666000610128321792,-2278208,621306 1666000610130700000,1666000610128322816,-2377184,621307 1666000610130800000,1666000610128323584,-2476416,621308 1666000610130900000,1666000610128324608,-2575392,621309 1666000610131000000,1666000610128325632,-2674368,621310 1666000610131100000,1666000610128326400,-2773600,621311 1666000610131200000,1666000610128327424,-2872576,621312 1666000610131300000,1666000610128328448,-2971552,621313 1666000610131400000,1666000610128329216,-3070784,621314 1666000610131500000,1666000610131500032,32,621315 1666000610131600000,1666000610131600128,128,621316 1666000610131700000,1666000610131700224,224,621317 After: 1666073510646200000,1666073510646200064,64,2676462 1666073510646300000,1666073510646300160,160,2676463 1666073510646400000,1666073510646400256,256,2676464 1666073510646500000,1666073510646500096,96,2676465 1666073510646600000,1666073510646600192,192,2676466 1666073510646700000,1666073510646700032,32,2676467 1666073510646800000,1666073510646800128,128,2676468 1666073510646900000,1666073510646900224,224,2676469 1666073510647000000,1666073510647000064,64,2676470 1666073510647100000,1666073510647100160,160,2676471 1666073510647200000,1666073510647200256,256,2676472 1666073510647300000,1666073510647300096,96,2676473 1666073510647400000,1666073510647400192,192,2676474 1666073510647500000,1666073510647500032,32,2676475 1666073510647600000,1666073510647600128,128,2676476 1666073510647700000,1666073510647700224,224,2676477 1666073510647800000,1666073510647800064,64,2676478 1666073510647900000,1666073510647900160,160,2676479 1666073510648000000,1666073510648000000,0,2676480 1666073510648100000,1666073510648100096,96,2676481 1666073510648200000,1666073510648200192,192,2676482 1666073510648300000,1666073510648300032,32,2676483 1666073510648400000,1666073510648400128,128,2676484 1666073510648500000,1666073510648500224,224,2676485 1666073510648600000,1666073510648600064,64,2676486 1666073510648700000,1666073510648700160,160,2676487 1666073510648800000,1666073510648800000,0,2676488 1666073510648900000,1666073510648900096,96,2676489 1666073510649000000,1666073510649000192,192,2676490 1666073510649100000,1666073510649100032,32,2676491 1666073510649200000,1666073510649200128,128,2676492 1666073510649300000,1666073510649300224,224,2676493 1666073510649400000,1666073510649400064,64,2676494 1666073510649500000,1666073510649500160,160,2676495 1666073510649600000,1666073510649600000,0,2676496 1666073510649700000,1666073510649700096,96,2676497 1666073510649800000,1666073510649800192,192,2676498 1666073510649900000,1666073510649900032,32,2676499 1666073510650000000,1666073510650000128,128,2676500 Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()Vladimir Oltean1-5/+4
[ Upstream commit a7d82367daa6baa5e8399e6327e7f2f463534505 ] In the blamed commit, it was not noticed that one implementation of chip->info->ops->phylink_get_caps(), called by mv88e6xxx_get_caps(), may access hardware registers, and in doing so, it takes the mv88e6xxx_reg_lock(). Namely, this is mv88e6352_phylink_get_caps(). This is a problem because mv88e6xxx_get_caps(), apart from being a top-level function (method invoked by dsa_switch_ops), is now also directly called from mv88e6xxx_setup_port(), which runs under the mv88e6xxx_reg_lock() taken by mv88e6xxx_setup(). Therefore, when running on mv88e6352, the reg_lock would be acquired a second time and the system would deadlock on driver probe. The things that mv88e6xxx_setup() can compete with in terms of register access with are the IRQ handlers and MDIO bus operations registered by mv88e6xxx_probe(). So there is a real need to acquire the register lock. The register lock can, in principle, be dropped and re-acquired pretty much at will within the driver, as long as no operations that involve waiting for indirect access to complete (essentially, callers of mv88e6xxx_smi_direct_wait() and mv88e6xxx_wait_mask()) are interrupted with the lock released. However, I would guess that in mv88e6xxx_setup(), the critical section is kept open for such a long time just in order to optimize away multiple lock/unlock operations on the registers. We could, in principle, drop the reg_lock right before the mv88e6xxx_setup_port() -> mv88e6xxx_get_caps() call, and re-acquire it immediately afterwards. But this would look ugly, because mv88e6xxx_setup_port() would release a lock which it didn't acquire, but the caller did. A cleaner solution to this issue comes from the observation that struct mv88e6xxxx_ops methods generally assume they are called with the reg_lock already acquired. Whereas mv88e6352_phylink_get_caps() is more the exception rather than the norm, in that it acquires the lock itself. Let's enforce the same locking pattern/convention for chip->info->ops->phylink_get_caps() as well, and make mv88e6xxx_get_caps(), the top-level function, acquire the register lock explicitly, for this one implementation that will access registers for port 4 to work properly. This means that mv88e6xxx_setup_port() will no longer call the top-level function, but the low-level mv88e6xxx_ops method which expects the correct calling context (register lock held). Compared to chip->info->ops->phylink_get_caps(), mv88e6xxx_get_caps() also fixes up the supported_interfaces bitmap for internal ports, since that can be done generically and does not require per-switch knowledge. That's code which will no longer execute, however mv88e6xxx_setup_port() doesn't need that. It just needs to look at the mac_capabilities bitmap. Fixes: cc1049ccee20 ("net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports") Reported-by: Maksim Kiselev <bigunclemax@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20221214110120.3368472-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31r6040: Fix kmemleak in probe and removeLi Zetao1-1/+4
[ Upstream commit 7e43039a49c2da45edc1d9d7c9ede4003ab45a5f ] There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff827e20ee>] phy_device_create+0x4e/0x90 [<ffffffff827e6072>] get_phy_device+0xd2/0x220 [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0 [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0 [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040] ... The problem occurs in probe process as follows: r6040_init_one: mdiobus_register mdiobus_scan <- alloc and register phy_device, the reference count of phy_device is 3 r6040_mii_probe phy_connect <- connect to the first phy_device, so the reference count of the first phy_device is 4, others are 3 register_netdev <- fault inject succeeded, goto error handling path // error handling path err_out_mdio_unregister: mdiobus_unregister(lp->mii_bus); err_out_mdio: mdiobus_free(lp->mii_bus); <- the reference count of the first phy_device is 1, it is not released and other phy_devices are released // similarly, the remove process also has the same problem The root cause is traced to the phy_device is not disconnected when removes one r6040 device in r6040_remove_one() or on error handling path after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet device is connected to the first PHY device of mii_bus, in order to notify the connected driver when the link status changes, which is the default behavior of the PHY infrastructure to handle everything. Therefore the phy_device should be disconnected when removes one r6040 device or on error handling path. Fix it by adding phy_disconnect() when removes one r6040 device or on error handling path after r6040_mii probed successfully. Fixes: 3831861b4ad8 ("r6040: implement phylib") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: enetc: avoid buffer leaks on xdp_do_redirect() failureVladimir Oltean1-27/+8
[ Upstream commit 628050ec952d2e2e46ec9fb6aa07e41139e030c8 ] Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software BD in the RX ring between index orig_i and i can have one of 2 refcount values on its page. We are the owner of the current buffer that is being processed, so the refcount will be at least 1. If the current owner of the buffer at the diametrically opposed index in the RX ring (i.o.w, the other half of this page) has not yet called kfree(), this page's refcount could even be 2. enetc_page_reusable() in enetc_flip_rx_buff() tests for the page refcount against 1, and [ if it's 2 ] does not attempt to reuse it. But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call, the page refcount can have one of 3 values. It can also be 0, if there is no owner of the other page half, and xdp_do_redirect() for this buffer ran so far that it triggered a flush of the devmap/cpumap bulk queue, and the consumers of those bulk queues also freed the buffer, all by the time xdp_do_redirect() returns the execution back to enetc. This is the reason why enetc_flip_rx_buff() is called before xdp_do_redirect(), but there is a big flaw with that reasoning: enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the enetc_page_reusable() branch, and if xdp_do_redirect() returns an error, we call enetc_xdp_free(), which does not deal gracefully with that. In fact, what happens is quite special. The page refcounts start as 1. enetc_flip_rx_buff() figures they're reusable, transfers these rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and bumps the refcount to 2. When xdp_do_redirect() later returns an error, we call the no-op enetc_xdp_free(), but we still haven't lost the reference to that page. A copy of it is still at rx_ring->next_to_alloc, but that has refcount 2 (and there are no concurrent owners of it in flight, to drop the refcount). What really kills the system is when we'll flip the rx_swbd->page the second time around. With an updated refcount of 2, the page will not be reusable and we'll really leak it. Then enetc_new_page() will have to allocate more pages, which will then eventually leak again on further errors from xdp_do_redirect(). The problem, summarized, is that we zeroize rx_swbd->page before we're completely done with it, and this makes it impossible for the error path to do something with it. Since the packet is potentially multi-buffer and therefore the rx_swbd->page is potentially an array, manual passing of the old pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit difficult. For the sake of going with a simple solution, we accept the possibility of racing with xdp_do_redirect(), and we move the flip procedure to execute only on the redirect success path. By racing, I mean that the page may be deemed as not reusable by enetc (having a refcount of 0), but there will be no leak in that case, either. Once we accept that, we have something better to do with buffers on XDP_REDIRECT failure. Since we haven't performed half-page flipping yet, we won't, either (and this way, we can avoid enetc_xdp_free() completely, which gives the entire page to the slab allocator). Instead, we'll call enetc_xdp_drop(), which will recycle this half of the buffer back to the RX ring. Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT") Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31bonding: do failover when high prio link upHangbin Liu1-9/+15
[ Upstream commit e95cc44763a41d5c715ef16742bcb1d8e6524a62 ] Currently, when a high prio link enslaved, or when current link down, the high prio port could be selected. But when high prio link up, the new active slave reselection is not triggered. Fix it by checking link's prio when getting up. Making the do_failover after looping all slaves as there may be multi high prio slaves up. Reported-by: Liang Li <liali@redhat.com> Fixes: 0a2ff7cc8ad4 ("Bonding: add per-port priority for failover re-selection") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31bonding: add missed __rcu annotation for curr_active_slaveHangbin Liu1-1/+1
[ Upstream commit 3d0b738fc5adf9f380702ac1424672e4b32c3781 ] There is one direct accesses to bond->curr_active_slave in bond_miimon_commit(). Protected it by rcu_access_pointer() since the later of this function also use this one. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: e95cc44763a4 ("bonding: do failover when high prio link up") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: macsec: fix net device access prior to holding a lockEmeel Hakim1-13/+21
[ Upstream commit f3b4a00f0f62da252c598310698dfc82ef2f2e2e ] Currently macsec offload selection update routine accesses the net device prior to holding the relevant lock. Fix by holding the lock prior to the device access. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31i40e: Fix the inability to attach XDP program on downed interfaceBartosz Staszewski1-12/+24
[ Upstream commit 0c87b545a2ed5cd8a6318011f1c92b188c2d74bc ] Whenever trying to load XDP prog on downed interface, function i40e_xdp was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0. i40e_open() calls i40e_vsi_configure_rx() which configures that field, but that only happens when interface is up. When it is down, i40e_open() is not being called, thus vsi->rx_buf_len is not set. Solution for this is calculate buffer length in newly created function - i40e_calculate_vsi_rx_buf_len() that return actual buffer length. Buffer length is being calculated based on the same rules applied previously in i40e_vsi_configure_rx() function. Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device") Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Saeed Mahameed <saeed@kernel.com> Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31stmmac: fix potential division by 0Piergiorgio Beruto2-2/+3
[ Upstream commit ede5a389852d3640a28e7187fb32b7f204380901 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Fixes: 91a2559c1dc5 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31octeontx2-af: cn10k: mcs: Fix a resource leak in the probe and remove functionsChristophe JAILLET1-1/+5
[ Upstream commit 87c978123ef1f346d7385eaccc141022d368166f ] In mcs_register_interrupts(), a call to request_irq() is not balanced by a corresponding free_irq(), neither in the error handling path, nor in the remove function. Add the missing calls. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f153db5152a141069f990206e7389f961d41ec.1670693669.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ntb_netdev: Use dev_kfree_skb_any() in interrupt contextEric Pilmore1-2/+2
[ Upstream commit 5f7d78b2b12a9d561f48fa00bab29b40f4616dad ] TX/RX callback handlers (ntb_netdev_tx_handler(), ntb_netdev_rx_handler()) can be called in interrupt context via the DMA framework when the respective DMA operations have completed. As such, any calls by these routines to free skb's, should use the interrupt context safe dev_kfree_skb_any() function. Previously, these callback handlers would call the interrupt unsafe version of dev_kfree_skb(). This has not presented an issue on Intel IOAT DMA engines as that driver utilizes tasklets rather than a hard interrupt handler, like the AMD PTDMA DMA driver. On AMD systems, a kernel WARNING message is encountered, which is being issued from skb_release_head_state() due to in_hardirq() being true. Besides the user visible WARNING from the kernel, the other symptom of this bug was that TCP/IP performance across the ntb_netdev interface was very poor, i.e. approximately an order of magnitude below what was expected. With the repair to use dev_kfree_skb_any(), kernel WARNINGs from skb_release_head_state() ceased and TCP/IP performance, as measured by iperf, was on par with expected results, approximately 20 Gb/s on AMD Milan based server. Note that this performance is comparable with Intel based servers. Fixes: 765ccc7bc3d91 ("ntb_netdev: correct skb leak") Fixes: 548c237c0a997 ("net: Add support for NTB virtual ethernet device") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20221209000659.8318-1-epilmore@gigaio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: lan9303: Fix read error execution pathJerry Ray1-1/+3
[ Upstream commit 8964916d206071b058c6351f88b1966bd58cbde0 ] This patch fixes an issue where a read failure of a port statistic counter will return unknown results. While it is highly unlikely the read will ever fail, it is much cleaner to return a zero for the stat count. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221209153502.7429-1-jerry.ray@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: ethernet: ti: am65-cpsw: Fix PM runtime leakage in ↵Roger Quadros1-3/+7
am65_cpsw_nuss_ndo_slave_open() [ Upstream commit 5821504f5073983733465b8bc430049c4343bbd7 ] Ensure pm_runtime_put() is issued in error path. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Link: https://lore.kernel.org/r/20221208105534.63709-1-rogerq@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31can: tcan4x5x: Fix use of register error status maskMarkus Schneider-Pargmann1-7/+7
[ Upstream commit 67727a17a6b375d68fe569b77e6516b034b834c0 ] TCAN4X5X_ERROR_STATUS is not a status register that needs clearing during interrupt handling. Instead this is a masking register that masks error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register effectively masks everything. Rename the register and mask all error interrupts only once by writing to the register in tcan4x5x_init. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31can: m_can: Call the RAM init directly from m_can_chip_configVivek Yadav3-15/+26
[ Upstream commit eaacfeaca7ad0804b9a6eff7afeba93a87db7638 ] When we try to access the mcan message ram addresses during the probe, hclk is gated by any other drivers or disabled, because of that probe gets failed. Move the mram init functionality to mcan chip config called by m_can_start from mcan open function, by that time clocks are enabled. Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Stable-dep-of: 67727a17a6b3 ("can: tcan4x5x: Fix use of register error status mask") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31can: tcan4x5x: Remove invalid write in clear_interruptsMarkus Schneider-Pargmann1-5/+0
[ Upstream commit 40c9e4f676abbe194541d88e796341c92d5a13c0 ] Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes to this register do not have any effect. Remove this write. The m_can driver aldready clears the interrupts in m_can_isr() by writing to M_CAN_IR which is translated to register 0x1050 which is a writable version of this register. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: amd-xgbe: Check only the minimum speed for active/passive cablesTom Lendacky1-12/+2
[ Upstream commit f8ab263d4d48e6dab752029bf562f20a2ee630ed ] There are cables that exist that can support speeds in excess of 10GbE. The driver, however, restricts the EEPROM advertised nominal bitrate to a specific range, which can prevent usage of cables that can support, for example, up to 25GbE. Rather than checking that an active or passive cable supports a specific range, only check for a minimum supported speed. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: amd-xgbe: Fix logic around active and passive cablesTom Lendacky1-3/+6
[ Upstream commit 4998006c73afe44e2f639d55bd331c6c26eb039f ] SFP+ active and passive cables are copper cables with fixed SFP+ end connectors. Due to a misinterpretation of this, SFP+ active cables could end up not being recognized, causing the driver to fail to establish a connection. Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is the default cable type, and handle active and passive cables when they are specifically detected. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang2-2/+2
[ Upstream commit 6151d105dfce8c23edf30eed35e97f3d9b96a35c ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In these two cases, dev_kfree_skb() is called consume the xmited SKB, so replace it with dev_consume_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-3/+3
[ Upstream commit 3727f742915f04f6fc550b80cf406999bd4e90d0 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs, so replace it with dev_kfree_skb_irq(). In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed queue length, so replace it with dev_kfree_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-2/+2
[ Upstream commit f07fadcbee2a5e84caa67c7c445424200bffb60b ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. In this case, the lock is used to protected 'bp', so we can move dev_kfree_skb() after the spin_unlock_irqrestore(). Fixes: 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit d1678bf45f21fa5ae4a456f821858679556ea5f8 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 5fe02e046e6422c4adfdbc50206ec7186077da24 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 3dfe3486c1cd4f82b466b7d307f23777137b8acc ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: farsync: Fix kmemleak when rmmods farsyncLi Zetao1-0/+2
[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ] There are two memory leaks reported by kmemleak: unreferenced object 0xffff888114b20200 (size 128): comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s) hex dump (first 32 bytes): e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW..... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0 [<ffffffff83d3989d>] dev_addr_init+0x13d/0x230 [<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50 [<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80 [<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync] ... unreferenced object 0xffff88810b85b000 (size 1024): comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s) hex dump (first 32 bytes): 00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p...... 00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync] [<ffffffff82060e83>] local_pci_probe+0xd3/0x170 ... The root cause is traced to the netdev and fst_card_info are not freed when removes one fst in fst_remove_one(), which may trigger oom if repeated insmod and rmmod module. Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as the operations on the error handling path in fst_add_one(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
[ Upstream commit 6cee96e09df54ae17784c0f38a49e0ed8229b825 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in free_tx_buffers() to drop the SKBs in tx buffers, when the card is down, so replace it with dev_kfree_skb_irq() here. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()Yuan Can1-0/+2
[ Upstream commit 01de1123322e4fe1bbd0fcdf0982511b55519c03 ] If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp needs to be freed. Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: stmmac: fix possible memory leak in stmmac_dvr_probe()Gaosheng Cui1-1/+2
[ Upstream commit a137f3f27f9290933fe7e40e6dc8a445781c31a2 ] The bitmap_free() should be called to free priv->af_xdp_zc_qps when create_singlethread_workqueue() fails, otherwise there will be a memory leak, so we add the err path error_wq_init to fix it. Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()Zhang Changzhong1-2/+6
[ Upstream commit f150b63f3fa5fdd81e0dd6151e8850268e29438c ] The skb allocated by stmmac_test_get_arp_skb() hasn't been released in some error handling case, which will lead to a memory leak. Fix this up by adding kfree_skb() to release skb. Compile tested only. Fixes: 5e3fb0a6e2b3 ("net: stmmac: selftests: Implement the ARP Offload test") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31net: defxx: Fix missing err handling in dfx_init()Yongqiang Liu1-4/+18
[ Upstream commit ae18dcdff0f8d7e84cd3fd9f496518b5e72d185d ] When eisa_driver_register() or tc_register_driver() failed, the modprobe defxx would fail with some err log as follows: Error: Driver 'defxx' is already registered, aborting... Fix this issue by adding err hanling in dfx_init(). Fixes: e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support") Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()Wang Yufen2-1/+2
[ Upstream commit c2f2924bc7f9ea75ef8d95863e710168f8196256 ] Fix to return a negative error code instead of 0 when brcmf_chip_set_active() fails. In addition, change the return value for brcmf_pcie_exit_download_state() to keep consistent. Fixes: d380ebc9b6fb ("brcmfmac: rename chip download functions") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1669959342-27144-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: rtl8xxxu: Fix the channel width reportingBitterblue Smith1-3/+7
[ Upstream commit 76c16af2cb10282274596e21add2c9f0b95c941b ] The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver reports about the TX rate, and the driver passes these reports to sta_statistics. The reports from RTL8192EU may or may not include the channel width. The reports from RTL8188FU do not include it. Only access the c2h->ra_report.bw field if the report (skb) is big enough. The other problem fixed here is that the code was actually never changing the channel width initially reported by rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0. Fixes: 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/5b41f1ae-72e7-6b7a-2459-b736399a1c40@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2hBitterblue Smith1-1/+1
[ Upstream commit dd469a754afdb782ba3033cee102147493dc39f4 ] This struct is used to access a sequence of bytes received from the wifi chip. It must not have any padding bytes between the members. This doesn't change anything on my system, possibly because currently none of the members need more than byte alignment. Fixes: b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1a270918-da22-ff5f-29fc-7855f740c5ba@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()Xiongfeng Wang1-3/+10
[ Upstream commit 5938196cc188ba4323bc6357f5ac55127d715888 ] As comment of pci_get_device() says, it returns a pci_device with its refcount increased. We need to call pci_dev_put() to decrease the refcount. Save the return value of pci_get_device() and call pci_dev_put() to decrease the refcount. Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1") Fixes: 2e30db0dde61 ("mt76: mt7915: add device id for mt7916") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: do not send firmware FW_FEATURE_NON_DL regionDeren Wu1-0/+4
[ Upstream commit f37f76d43865c58cb96aa13c87164abb41f22d0b ] skip invalid section to avoid potential risks Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clcDeren Wu1-1/+1
[ Upstream commit e5c6bc6f19d8c293f86b347cddab54d5a3830b38 ] Add __packed annotation to avoid potential CLC parsing error Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: fix coverity overrun-call in mt76_get_txpower()Deren Wu1-1/+2
[ Upstream commit 03dd0d49de7db680a856fa566963bb8421f46368 ] Make sure the nss is valid for nss_delta array. Return zero if the index is invalid. Coverity message: Event overrun-call: Overrunning callee's array of size 4 by passing argument "n_chains" (which evaluates to 15) in call to "mt76_tx_power_nss_delta". int delta = mt76_tx_power_nss_delta(n_chains); Fixes: 07cda406308b ("mt76: fix rounding issues on converting per-chain and combined txpower") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7921: fix wrong power after multiple SAR setYN Chen3-0/+9
[ Upstream commit 7eefb93d4a6fbccd859e538d208c50fd10b44cb7 ] We should update CLC config before SAR set to synchronize all related settings. Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDCNicolas Cavallari1-0/+1
[ Upstream commit de147cc28985a2a09e5d6d179fc5ef59b22fc058 ] mt7915 does not have a per-band number of chains unlike the other chips, it only has a total number of chains. Yet the current code would consider the total number as a per-band number. For example, it would report that a 2x2 + 2x2 DBDC card have 4 chains on each band and set chainmask to 0b1111 for the first interface and 0b11110000 for the second. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7915: rework eeprom tx paths and streams initShayne Chen2-39/+23
[ Upstream commit a7ec8bcf00034ce84d4c9a15dffd7577fbed4db2 ] Rework tx paths and streams init part to improve readability, and make sure that the available tx streams should be smaller than or equal to the available tx paths. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: de147cc28985 ("wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDC") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7921: fix reporting of TX AGGR histogramLorenzo Bianconi1-1/+1
[ Upstream commit 028b4f22b37b88821fd87b56ce47b180583c774e ] Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7915: fix reporting of TX AGGR histogramLorenzo Bianconi1-1/+1
[ Upstream commit 528d13e7f033b54d50e0077922dd52f005d648cf ] Fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7915: fix mt7915_mac_set_timing()Ryder Lee1-6/+15
[ Upstream commit 0c881dc08fd71ca2673f31a64989fbb28eac26f4 ] Correct mac timiing settings for different hardware generations. This improves 40-60Mbps performance. Fixes: 9aac2969fe5f ("mt76: mt7915: update mac timing settings") Reported-By: Carson Vandegriffe <carson.vandegriffe@candelatech.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: mt76: mt7921: fix antenna signal are way off in monitor modeSean Wang1-11/+21
[ Upstream commit c256ba6b1909f28b517274282b6845567e974143 ] Group 3 in RxD is disabled in monitor mode. We should use the group 5 in RxD instead to fix antenna signal way off issue, e.g we would see the incorrect antenna signal value in wireshark. On the other hand, Group 5 wouldn't be used in STA or AP mode, so the patch shouldn't cause any harm to those modes. Fixes: cbaa0a404f8d ("mt76: mt7921: fix up the monitor mode") Reported-by: Adrian Granados <agranados@gmail.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31bonding: uninitialized variable in bond_miimon_inspect()Dan Carpenter1-1/+1
[ Upstream commit e5214f363dabca240446272dac54d404501ad5e5 ] The "ignore_updelay" variable needs to be initialized to false. Fixes: f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/Y4SWJlh3ohJ6EPTL@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: iwlwifi: mvm: fix double free on tx path.Ben Greear1-1/+11
[ Upstream commit 0473cbae2137b963bd0eaa74336131cb1d3bc6c3 ] We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 </TASK> Allocated by task 9650: kasan_save_stack+0x1c/0x40 __kasan_slab_alloc+0x6d/0x90 kmem_cache_alloc_node+0xf3/0x2b0 __alloc_skb+0x191/0x220 tcp_stream_alloc_skb+0x3f/0x330 tcp_sendmsg_locked+0x67c/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 9650: kasan_save_stack+0x1c/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x102/0x170 kmem_cache_free+0xc8/0x3e0 iwl_mvm_mac_itxq_xmit+0x124/0x270 [iwlmvm] ieee80211_queue_skb+0x874/0xd10 [mac80211] ieee80211_xmit_fast+0xf80/0x1180 [mac80211] __ieee80211_subif_start_xmit+0x287/0x680 [mac80211] ieee80211_subif_start_xmit+0xcd/0x730 [mac80211] dev_hard_start_xmit+0xf6/0x420 __dev_queue_xmit+0x165b/0x1b50 ip_finish_output2+0x66e/0xfb0 __ip_finish_output+0x487/0x6d0 ip_output+0x11c/0x350 __ip_queue_xmit+0x36b/0x9d0 __tcp_transmit_skb+0xb35/0x15c0 tcp_write_xmit+0x3f1/0x24d0 tcp_sendmsg_locked+0x8a9/0x1520 tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 __sys_sendto+0x19d/0x250 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88813cfa4b40 which belongs to the cache skbuff_fclone_cache of size 472 The buggy address is located 96 bytes inside of 472-byte region [ffff88813cfa4b40, ffff88813cfa4d18) The buggy address belongs to the physical page: page:ffffea0004f3e900 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813cfa6c40 pfn:0x13cfa4 head:ffffea0004f3e900 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x5fff8000010200(slab|head|node=0|zone=2|lastcpupid=0x3fff) raw: 005fff8000010200 ffffea0004656b08 ffffea0008e8cf08 ffff8881081a5240 raw: ffff88813cfa6c40 0000000000170015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813cfa4a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813cfa4b00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff88813cfa4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88813cfa4c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88813cfa4c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code") Link: https://lore.kernel.org/linux-wireless/20220928193057.16132-1-greearb@candelatech.com/ Tested-by: Amol Jawale <amol.jawale@candelatech.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20221123225313.21b1ee31d666.I3b3ba184433dd2a544d91eeeda29b467021824ae@changeid Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changedBitterblue Smith1-1/+1
[ Upstream commit 7927afb5e27baac694f585b59c436ba323528dc2 ] Commit a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width") introduced a line where the pointer returned by ieee80211_find_sta() is used after rcu_read_unlock(). Move rcu_read_unlock() a bit lower to fix this. Fixes: a8b5aef2cca1 ("wifi: rtl8xxxu: gen2: Enable 40 MHz channel width") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3c82ad09-7593-3be1-1d2c-e58505fb43cb@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx()Ziyang Xuan1-0/+1
[ Upstream commit 895b3b06efc285c1245242e9638b9ae251dc13ec ] urbs does not be freed in exception paths in __lf_x_usb_enable_rx(). That will trigger memory leak. To fix it, add kfree() for urbs within "error" label. Compile tested only. Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221119051900.1192401-1-william.xuanziyang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31bonding: fix link recovery in mode 2 when updelay is nonzeroJonathan Toppins1-1/+10
[ Upstream commit f8a65ab2f3ff7410921ebbf0dc55453102c33c56 ] Before this change when a bond in mode 2 lost link, all of its slaves lost link, the bonding device would never recover even after the expiration of updelay. This change removes the updelay when the bond currently has no usable links. Conforming to bonding.txt section 13.1 paragraph 4. Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31wifi: rtw89: fix physts IE page checkZong-Zhe Yang1-1/+1
[ Upstream commit 9e2f177de1bfb7d891bf38140bda54831ecef30d ] The index RTW89_PHYSTS_BITMAP_NUM is not a valid physts IE page. So, fix the check condition. Fixes: eb4e52b3f38d ("rtw89: fix incorrect channel info during scan") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221118042322.26794-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 00:27:52 +0300