summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-08-11net: socionext: Increase descriptors to 256Ilias Apalodimas1-3/+2
Increasing descriptors to 256 from 128 and adjusting the NAPI weight to 64 increases performace on Rx by ~20% on 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: socionext: Use descriptor info instead of MMIO reads on RxIlias Apalodimas1-15/+10
MMIO reads for remaining packets in queue occur (at least)twice per invocation of netsec_process_rx(). We can use the packet descriptor to identify if it's owned by the hardware and break out, avoiding the more expensive MMIO read operations. This has a ~2% increase on the pps of the Rx path when tested with 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11vxge: remove set but not used variable 'req_out', 'status' and 'ret'YueHaibing1-21/+6
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/neterion/vxge/vxge-config.c:1097:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2263:6: warning: variable 'req_out' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2262:22: warning: variable 'status' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2360:22: warning: variable 'status' set but not used [-Wunused-but-set-variable] enum vxge_hw_status status = VXGE_HW_OK; Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11virtio_net: Stripe queue affinities across cores.Caleb Raitto1-15/+27
Always set the affinity hint, even if #cpu != #vq. Handle the case where #cpu > #vq (including when #cpu % #vq != 0) and when #vq > #cpu (including when #vq % #cpu != 0). Signed-off-by: Caleb Raitto <caraitto@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jon Olson <jonolson@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11virtio: Make vp_set_vq_affinity() take a mask.Caleb Raitto1-4/+4
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU. If there are fewer queues than cores, queue affinity should be able to map to multiple cores. Link: https://patchwork.ozlabs.org/patch/948149/ Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Caleb Raitto <caraitto@google.com> Acked-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11lan743x: lan743x: Add PTP supportBryan Whitehead6-5/+1443
PTP support includes: Ingress, and egress timestamping. One step timestamping available. PTP clock support. Periodic output support. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11wimax: usb-tx: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" annotation at the bottom of the case, which is what GCC is expecting to find. Addresses-Coverity-ID: 115075 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11wimax: usb-fw: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" annotation at the bottom of the case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1369529 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: dp83640: Mark expected switch fall-throughsGustavo A. R. Silva1-1/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment at the top of the switch statement with a proper "fall through" annotation for each case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11drivers/net/usb/r8152: remove the unneeded variable "ret" in ↵zhong jiang1-2/+1
rtl8152_system_suspend rtl8152_system_suspend defines the variable "ret", but it is not modified after initialization. So just remove it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11bnxt_en: Fix strcpy() warnings in bnxt_ethtool.cVasundhara Volam1-3/+3
This patch fixes following smatch warnings: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2826 bnxt_fill_coredump_seg_hdr() error: strcpy() '"sEgM"' too large for 'seg_hdr->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2858 bnxt_fill_coredump_record() error: strcpy() '"cOrE"' too large for 'record->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2879 bnxt_fill_coredump_record() error: strcpy() 'utsname()->sysname' too large for 'record->os_name' (65 vs 32) Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11liquidio: copperhead LED identificationRaghu Vatsavayi2-5/+23
Add LED identification support for liquidio TP copperhead cards. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11qed/qede: qede_setup_tc() can be statickbuild test robot1-1/+1
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11mlxsw: core: remove unnecessary function mlxsw_core_driver_putYueHaibing1-12/+0
The function mlxsw_core_driver_put only traverse mlxsw_core_driver_list to find the matched mlxsw_driver,but never used it. So it can be removed safely. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: mvneta: fix mvneta_config_rss on armada 3700Jisheng Zhang1-11/+20
The mvneta Ethernet driver is used on a few different Marvell SoCs. Some SoCs have per cpu interrupts for Ethernet events, the driver uses a per CPU napi structure for this case. Some SoCs such as armada 3700 have a single interrupt for Ethernet events, the driver uses a global napi structure for this case. Current mvneta_config_rss() always operates the per cpu napi structure. Fix it by operating a global napi for "single interrupt" case, and per cpu napi structure for remaining cases. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11r8169: don't configure max jumbo frame size per chip versionHeiner Kallweit1-118/+83
We don't have to configure the max jumbo frame size per chip (sub-)version. It can be easily determined based on the chip family. And new members of the RTL8168 family (if there are any) should be automatically covered. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11r8169: don't configure csum function per chip versionHeiner Kallweit1-67/+67
We don't have to configure the csum function per chip (sub-)version. The distinction is simple, versions RTL8102e and from RTL8168c onwards support csum_v2. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11r8169: simplify interrupt handlerHeiner Kallweit1-12/+7
Simplify the interrupt handler a little and make it better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11r8169: don't include asm headers directlyHeiner Kallweit1-3/+1
The asm headers shouldn't be included directly. asm/irq.h is implicitly included by linux/interrupt.h, and instead of asm/io.h include linux/io.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11r8169: remove version infoHeiner Kallweit1-8/+0
The version number hasn't changed for ages and in general I doubt it provides any benefit. The message in rtl_init_one() may even be misleading because it's printed also if something fails in probe. Therefore let's remove the version information. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10cxgb4: add support to display DCB infoGanesh Goudar4-2/+197
display Data Center bridging information in debug fs. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: chelsio: cxgb2: remove unused array pci_speedColin Ian King1-4/+0
Array pci_speed is defined but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: 'pci_speed' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: remove unused arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_nameColin Ian King2-4/+0
Arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_name are defined but never used hence they are redundant and can be removed. Cleans up clang warnings: warning: 'mlxsw_i2c_driver_name' defined but not used warning: 'mlxsw_pci_driver_name' defined but not used Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10cxgb4: update 1.20.8.0 as the latest firmware supportedGanesh Goudar1-6/+6
Change t4fw_version.h to update latest firmware version number to 1.20.8.0. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: allow to call netif_reset_xps_queues() under cpus_read_lockAndrei Vagin1-1/+3
The definition of static_key_slow_inc() has cpus_read_lock in place. In the virtio_net driver, XPS queues are initialized after setting the queue:cpu affinity in virtnet_set_affinity() which is already protected within cpus_read_lock. Lockdep prints a warning when we are trying to acquire cpus_read_lock when it is already held. This patch adds an ability to call __netif_set_xps_queue under cpus_read_lock(). Acked-by: Jason Wang <jasowang@redhat.com> ============================================ WARNING: possible recursive locking detected 4.18.0-rc3-next-20180703+ #1 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20 but task is already holding lock: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110 #1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0 #2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60 v2: move cpus_read_lock() out of __netif_set_xps_queue() Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: phy: sftp: print debug message with text, not numbersAndrew Lunn1-4/+72
Convert the state numbers, device state, etc from numbers to strings when printing debug messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10ethernet/qlogic: remove unused array msi_tgt_statusColin Ian King1-7/+0
Array msi_tgt_status is defined but never used, hence it is redundant and can be removed. Cleans up clang warning: warning: 'msi_tgt_status' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: dsa: rtl8366rb: Support port 4 (WAN)Linus Walleij1-0/+30
The totally undocumented IO mode needs to be set to enumerator 0 to enable port 4 also known as WAN in most configurations, for ordinary traffic. The 3 bits in the register come up as 010 after reset, but need to be set to 000. The Realtek source code contains a name for these bits, but no explanation of what the 8 different IO modes may be. Set it to zero for the time being and drop a comment so people know what is going on if they run into trouble. This "mode zero" works fine with the D-Link DIR-685 with RTL8366RB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: spectrum_flower: use PTR_ERR_OR_ZERO()YueHaibing1-3/+2
Fix ptr_ret.cocci warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c:543:1-3: WARNING: PTR_ERR_OR_ZERO can be used Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10be2net: Use Kconfig flag to support for enabling/disabling adaptersPetr Oros3-3/+63
Add flags to enable/disable supported chips in be2net. With disable support are removed coresponding PCI IDs and also codepaths with [BE2|BE3|BEx|lancer|skyhawk]_chip checks. Disable chip will reduce module size by: BE2 ~2kb BE3 ~3kb Lancer ~10kb Skyhawk ~9kb When enable skyhawk only it will reduce module size by ~20kb New help style in Kconfig Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Ingress tc flower offload (drop action) support.Manish Chopra4-11/+362
The main motive of this patch is to lay down driver's tc offload infrastructure in place. With these changes tc can offload various supported flow profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop action. Dropped flows statistic is a global counter for all the offloaded flows for drop action and is populated in ethtool statistics as common "gft_filter_drop". Examples - tc qdisc add dev p4p1 ingress tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto udp src_ip 192.168.40.100 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \ src_port 453 dst_port 876 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_port 98 action drop Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qede: Add destination ip based flow profile.Manish Chopra1-48/+66
This patch adds support for dropping and redirecting the flows based on destination IP in the packet. This also moves the profile mode settings in their own functions which can be used through tc flows in successive patch. For example - ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.40.100 action -1 ethtool -N p5p1 flow-type udp4 dst-ip 192.168.50.100 action 1 ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.60.100 action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: Multi CoS support.Manish Chopra6-49/+194
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-30/+20
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add the bindings parsing for XGMAC2Jose Abreu2-0/+8
Add the bindings parsing for XGMAC2 IP block. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Integrate XGMAC into main driver flowJose Abreu1-19/+48
Now that we have all the XGMAC related callbacks, lets start integrating this IP block into main driver. Also, we corrected the initialization flow to only start DMA after setting descriptors length. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add PTP support for XGMAC2Jose Abreu3-4/+7
XGMAC2 uses the same engine of timestamping as GMAC4. Let's use the same callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MDIO related functions for XGMAC2Jose Abreu1-4/+129
Add the MDIO related funcionalities for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add descriptor related callbacks for XGMAC2Jose Abreu5-2/+314
Add the descriptor related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add DMA related callbacks for XGMAC2Jose Abreu5-2/+471
Add the DMA related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MAC related callbacks for XGMAC2Jose Abreu6-3/+519
Add the MAC related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add XGMAC 2.10 HWIF entryJose Abreu2-8/+37
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with empty callbacks which will be added in posterior patches. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Re-setup interrupts on CMODE change.Andrew Lunn3-2/+27
When a port changes CMODE, the SERDES interface being used can change. Disable interrupts for the old SERDES interface, and enable interrupts on the new. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390Andrew Lunn4-0/+222
phylink wants to know when the MAC layers notices a change in the link. For the 6390 family, this is a change in the SERDES state. Add interrupt support for the SERDES interface used to implement SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and 10. Support for the 10G SERDES and other ports will be added later, building on this basic framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: link mv88e6xxx_port to mv88e6xxx_chipAndrew Lunn2-0/+5
An up coming change will register interrupts for individual switch ports, using the mv88e6xxx_port as the interrupt context information. Add members to the mv88e6xxx_port structure so we can link it back to the mv88e6xxx_chip member the port belongs to and the port number of the port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Power on/off SERDES on cmode changeAndrew Lunn1-0/+9
The 6390 family has a number of SERDES interfaces per port. When the cmode changes, eg 1000Base-X to XAUI, the SERDES interface in use will also change. Power down the old SERDES interface and power up the new SERDES interface. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Cache the port cmodeAndrew Lunn5-47/+57
The ports CMODE indicates the type of link between the MAC and the PHY. It is used often in the SERDES code. Rather than read it each time, cache its value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 2500Base-X uses the 1000Base-X SERDESAndrew Lunn1-1/+1
The 6390 has three different SERDES interface types. 2500Base-X is implemented by the SGMII/1000Base-X SERDES. So power on/off the correct SERDES. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add serdes register read/write helperAndrew Lunn2-11/+25
Add a helper for accessing SERDES registers of the 6390 family. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Rename sgmii/10g power functionsAndrew Lunn1-6/+8
There is a need to add more functions manipulating the SERDES interfaces. Cleanup the namespace. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-17 03:16:43 +0300