summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-11-16net/mlx5e: E-Switch, Fix comparing termination table instanceRoi Dayan1-6/+8
[ Upstream commit f4f4096b410e8d31c3f07f39de3b17d144edd53d ] The pkt_reformat pointer being saved under flow_act and not dest attribute in the termination table instance. Fix the comparison pointers. Also fix returning success if one pkt_reformat pointer is null and the other is not. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5e: TC, Fix wrong rejection of packet-per-second policingJianbo Liu1-6/+0
[ Upstream commit 9e06430841363a1d2932d546fdce1cc5edb3c2a0 ] In the bellow commit, we added support for PPS policing without removing the check which block offload of such cases. Fix it by removing this check. Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5e: Fix tc acts array not to be dependent on enum orderRoi Dayan1-60/+32
[ Upstream commit 08912ea799cd2a43b8999457e316967fe4e2f327 ] The tc acts array should not be dependent on kernel internal flow action id enum. Fix the array initialization. Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5e: Add missing sanity checks for max TX WQE sizeMaxim Mikityanskiy3-1/+35
[ Upstream commit f9c955b4fe5c8626d11b8a9b93ccc0ba77358fec ] The commit cited below started using the firmware capability for the maximum TX WQE size. This commit adds an important check to verify that the driver doesn't attempt to exceed this capability, and also restores another check mistakenly removed in the cited commit (a WQE must not exceed the page size). Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5: fw_reset: Don't try to load device in case PCI isn't workingShay Drory1-1/+2
[ Upstream commit 7d167b4a4c810919ba1affd02fc6b7f40e7e6eeb ] In case PCI reads fail after unload, there is no use in trying to load the device. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5: E-switch, Set to legacy mode if failed to change switchdev modeChris Mi2-21/+11
[ Upstream commit e12de39c07a7872c1ac7250311bb60b74ff29f25 ] No need to rollback to the other mode because probably will fail again. Just set to legacy mode and clear fdb table created flag. So that fdb table will not be cleared again. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5: Allow async trigger completion execution on single CPU systemsRoy Novich1-3/+8
[ Upstream commit 2808b37b59288ad8f1897e3546c2296df3384b65 ] For a single CPU system, the kernel thread executing mlx5_cmd_flush() never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop. On a single processor system, this leads to a deadlock as the kernel thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this, by adding the cond_resched() call to the loop, allow the command completion kernel thread to execute. Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net/mlx5: Bridge, verify LAG state when adding bond to bridgeVlad Buslov1-0/+31
[ Upstream commit 15f8f168952f54d3c86d734dc764f20844e423ac ] Mlx5 LAG is initialized asynchronously on a workqueue which means that for a brief moment after setting mlx5 UL representors as lower devices of a bond netdevice the LAG itself is not fully initialized in the driver. When adding such bond device to a bridge mlx5 bridge code will not consider it as offload-capable, skip creating necessary bookkeeping and fail any further bridge offload-related commands with it (setting VLANs, offloading FDBs, etc.). In order to make the error explicit during bridge initialization stage implement the code that detects such condition during NETDEV_PRECHANGEUPPER event and returns an error. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: wwan: iosm: fix invalid mux header typeM Chetan Kumar2-0/+9
[ Upstream commit 02d2d2ea4a3bc2391f6ac31f6854da83e8a63829 ] Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram. During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops. Override the UL/DL size and TD count for Mux aggregation protocol. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfgM Chetan Kumar1-3/+8
[ Upstream commit d38a648d2d6cc7bee11c6f533ff9426a00c2a74c ] ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use. Fixes: 7e98d785ae61 ("net: iosm: entry point") Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: nixge: disable napi when enable interrupts failed in nixge_open()Zhengchao Shao1-0/+1
[ Upstream commit b06334919c7a068d54ba5b219c05e919d89943f7 ] When failed to enable interrupts in nixge_open() for opening device, napi isn't disabled. When open nixge device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: tun: call napi_schedule_prep() to ensure we own a napiEric Dumazet1-6/+13
[ Upstream commit 07d120aa33cc9d9115753d159f64d20c94458781 ] A recent patch exposed another issue in napi_get_frags() caught by syzbot [1] Before feeding packets to GRO, and calling napi_complete() we must first grab NAPI_STATE_SCHED. [1] WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Modules linked in: CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b2049d77 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076 Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000 RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007 RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628 R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000 FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> napi_complete include/linux/netdevice.h:510 [inline] tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_writev+0x1aa/0x630 fs/read_write.c:934 do_writev+0x133/0x2f0 fs/read_write.c:977 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f37021a3c19 Fixes: 1118b2049d77 ("net: tun: Fix memory leaks of napi_get_frags") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20221107180011.188437-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init()Zhengchao Shao1-1/+6
[ Upstream commit 519b58bbfa825f042fcf80261cc18e1e35f85ffd ] When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16drivers: net: xgene: disable napi when register irq failed in xgene_enet_open()Zhengchao Shao1-1/+3
[ Upstream commit ce9e57feeed81d17d5e80ed86f516ff0d39c3867 ] When failed to register irq in xgene_enet_open() for opening device, napi isn't disabled. When open xgene device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: aeb20b6b3f4e ("drivers: net: xgene: fix: ifconfig up/down crash") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16octeontx2-pf: Fix SQE threshold checkingRatheesh Kannoth3-13/+21
[ Upstream commit f0dfc4c88ef39be0ba736aa0ce6119263fc19aeb ] Current way of checking available SQE count which is based on HW updated SQB count could result in driver submitting an SQE even before CQE for the previously transmitted SQE at the same index is processed in NAPI resulting losing SKB pointers, hence a leak. Fix this by checking a consumer index which is updated once CQE is processed. Fixes: 3ca6c4c882a7 ("octeontx2-pf: Add packet transmission support") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: ethernet: mtk-star-emac: disable napi when connect and start PHY failed ↵Zhengchao Shao1-0/+2
in mtk_star_enable() [ Upstream commit b0c09c7f08c2467b2089bdf4adb2fbbc2464f4a8 ] When failed to connect to and start PHY in mtk_star_enable() for opening device, napi isn't disabled. When open mtk star device next time, it will reports a invalid opcode issue. Fix it. Only be compiled, not be tested. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221107012159.211387-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: lapbether: fix issue of invalid opcode in lapbeth_open()Zhengchao Shao1-0/+1
[ Upstream commit 3faf7e14ec0c3462c2d747fa6793b8645d1391df ] If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK> Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: broadcom: Fix BCMGENET KconfigYueHaibing1-1/+1
[ Upstream commit 8d820bc9d12b8beebca836cceaf2bbe68216c2f8 ] While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m, kconfig warning and build errors: WARNING: unmet direct dependencies detected for BROADCOM_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y] drivers/net/phy/broadcom.o: In function `bcm54xx_suspend': broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop' drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe': broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe' drivers/net/phy/broadcom.o: In function `bcm54xx_config_init': broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init' Fixes: 99addbe31f55 ("net: broadcom: Select BROADCOM_PHY for BCMGENET") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Florian Fainelli <f.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: stmmac: dwmac-meson8b: fix meson8b_devm_clk_prepare_enable()Rasmus Villemoes1-5/+3
[ Upstream commit ed4314f7729714d788698ade4f9905ee5378ebc0 ] There are two problems with meson8b_devm_clk_prepare_enable(), introduced in commit a54dc4a49045 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable"): - It doesn't pass the clk argument, but instead always the rgmii_tx_clk of the device. - It silently ignores the return value of devm_add_action_or_reset(). The former didn't become an actual bug until another user showed up in the next commit 9308c47640d5 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration"). The latter means the callers could end up with the clock not actually prepared/enabled. Fixes: a54dc4a49045 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: wwan: mhi: fix memory leak in mhi_mbim_dellinkHW He1-0/+1
[ Upstream commit 668205b9c9f94d5ed6ab00cce9a46a654c2b5d16 ] MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: aa730a9905b7 ("net: wwan: Add MHI MBIM network driver") Signed-off-by: HW He <hw.he@mediatek.com> Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: wwan: iosm: fix memory leak in ipc_wwan_dellinkHW He1-0/+1
[ Upstream commit f25caaca424703d5a0607310f0452f978f1f78d9 ] IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: 2a54f2c77934 ("net: iosm: net driver") Signed-off-by: HW He <hw.he@mediatek.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16hamradio: fix issue of dev reference count leakage in bpq_device_event()Zhengchao Shao1-1/+1
[ Upstream commit 85cbaf032d3cd9f595152625eda5d4ecb1d6d78d ] When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: lapbether: fix issue of dev reference count leakage in ↵Zhengchao Shao1-1/+1
lapbeth_device_event() [ Upstream commit 531705a765493655472c993627106e19f7e5a6d2 ] When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: fman: Unregister ethernet device on removalSean Anderson1-0/+9
[ Upstream commit b7cbc6740bd6ad5d43345a2504f7e4beff0d709f ] When the mac device gets removed, it leaves behind the ethernet device. This will result in a segfault next time the ethernet device accesses mac_dev. Remove the ethernet device when we get removed to prevent this. This is not completely reversible, since some resources aren't cleaned up properly, but that can be addressed later. Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16bnxt_en: fix potentially incorrect return value for ndo_rx_flow_steerAlex Barba1-1/+1
[ Upstream commit 02597d39145bb0aa81d04bf39b6a913ce9a9d465 ] In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry that we are attempting to steer is already found. This is not the correct behavior. The return code should be the value/index that corresponds to the entry. Returning zero all the time causes the RFS records to be incorrect unless entry '0' is the correct one. As flows migrate to different cores this can create entries that are not correct. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Akshay Navgire <anavgire@purestorage.com> Signed-off-by: Alex Barba <alex.barba@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()Michael Chan1-1/+1
[ Upstream commit 6d81ea3765dfa6c8a20822613c81edad1c4a16a0 ] During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16net: tun: Fix memory leaks of napi_get_fragsWang Yufen1-0/+1
[ Upstream commit 1118b2049d77ca0b505775fc1a8d1909cf19a7ec ] kmemleak reports after running test_progs: unreferenced object 0xffff8881b1672dc0 (size 232): comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s) hex dump (first 32 bytes): e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g..... 00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace: [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150 [<0000000041c7fc09>] __napi_build_skb+0x15/0x50 [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540 [<000000003ecfa30e>] napi_get_frags+0x59/0x140 [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun] [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun] [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320 [<000000008f338ea2>] do_iter_write+0x135/0x630 [<000000008a3377a4>] vfs_writev+0x12e/0x440 [<00000000a6b5639a>] do_writev+0x104/0x280 [<00000000ccf065d8>] do_syscall_64+0x3b/0x90 [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: tun_get_user() napi_gro_frags() napi_frags_finish() case GRO_NORMAL: gro_normal_one() list_add_tail(&skb->list, &napi->rx_list); <-- While napi->rx_count < READ_ONCE(gro_normal_batch), <-- gro_normal_list() is not called, napi->rx_list is not empty <-- not ask to complete the gro work, will cause memory leaks in <-- following tun_napi_del() ... tun_napi_del() netif_napi_del() __netif_napi_del() <-- &napi->rx_list is not empty, which caused memory leaks To fix, add napi_complete() after napi_gro_frags(). Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]Ratheesh Kannoth2-30/+162
[ Upstream commit 51afe9026d0c63263abe9840e629f118d7405b36 ] In scenarios where multiple errors have occurred for a SQ before SW starts handling error interrupt, SQ_CTX[OP_INT] may get overwritten leading to NIX_LF_SQ_OP_INT returning incorrect value. To workaround this read LMT, MNQ and SQ individual error status registers to determine the cause of error. Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16macsec: clear encryption keys from the stack after setting up offloadSabrina Dubroca1-0/+2
[ Upstream commit aaab73f8fba4fd38f4d2617440d541a1c334e819 ] macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack offloading context to pass it to the drivers, but leaves it there when it's done. Clear it with memzero_explicit as soon as it's not needed anymore. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16macsec: fix detection of RXSCs when toggling offloadingSabrina Dubroca1-1/+1
[ Upstream commit 80df4706357a5a06bbbc70273bf2611df1ceee04 ] macsec_is_configured incorrectly uses secy->n_rx_sc to check if some RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but there can also be inactive SCs as well, which may be stored in the driver (in case we're disabling offloading), or would have to be pushed to the device (in case we're trying to enable offloading). As long as RXSCs active on creation and never turned off, the issue is not visible. Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16macsec: fix secy->n_rx_sc accountingSabrina Dubroca1-6/+8
[ Upstream commit 73a4b31c9d11f98ae3bc5286d5382930adb0e9c7 ] secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a secy. This is then used by macsec_send_sci to help decide if we should add the SCI to the header or not. This logic is currently broken when we create a new RXSC and turn it off at creation, as create_rx_sc always sets ->active to true (and immediately uses that to increment n_rx_sc), and only later macsec_add_rxsc sets rx_sc->active. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-16macsec: delete new rxsc when offload failsSabrina Dubroca1-3/+2
[ Upstream commit 93a30947821c203d08865c4e17ea181c9668ce52 ] Currently we get an inconsistent state: - netlink returns the error to userspace - the RXSC is installed but not offloaded Then the device could get confused when we try to add an RXSA, because the RXSC isn't supposed to exist. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()Dokyung Song1-0/+4
commit 6788ba8aed4e28e90f72d68a9d794e34eac17295 upstream. This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dokyung Song <dokyung.song@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-10stmmac: dwmac-loongson: fix invalid mdio_nodeLiu Peibao1-5/+2
[ Upstream commit 2ae34111fe4eebb69986f6490015b57c88804373 ] In current code "plat->mdio_node" is always NULL, the mdio support is lost as there is no "mdio_bus_data". The original driver could work as the "mdio" variable is never set to false, which is described in commit <b0e03950dd71> ("stmmac: dwmac-loongson: fix uninitialized variable ......"). And after this commit merged, the "mdio" variable is always false, causing the mdio supoort logic lost. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Liu Peibao <liupeibao@loongson.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10ibmvnic: Free rwi on reset successNick Child1-8/+8
[ Upstream commit d6dd2fe71153f0ff748bf188bd4af076fe09a0a6 ] Free the rwi structure in the event that the last rwi in the list processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets") introduces an issue that results in a 32 byte memory leak whenever the last rwi in the list gets processed. Fixes: 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets") Signed-off-by: Nick Child <nnac123@linux.ibm.com> Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: mdio: fix undefined behavior in bit shift for __mdiobus_registerGaosheng Cui1-1/+1
[ Upstream commit 40e4eb324c59e11fcb927aa46742d28aba6ecb8a ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: lan966x: Fix unmapping of received frames using FDMAHoratiu Vultur1-6/+12
[ Upstream commit fc57062f98b0b0ae52bc584d8fd5ac77c50df607 ] When lan966x was receiving a frame, then it was building the skb and after that it was calling dma_unmap_single with frame size as the length. This actually has 2 issues: 1. It is using a length to map and a different length to unmap. 2. When the unmap was happening, the data was sync for cpu but it could be that this will overwrite what build_skb was initializing. The fix for these two problems is to change the order of operations. First to sync the frame for cpu, then to build the skb and in the end to unmap using the correct size but without sync the frame again for cpu. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: lan966x: Fix FDMA when MTU is changedHoratiu Vultur2-3/+7
[ Upstream commit 872ad758f9b7fb4eb42aebaf64e50c5b29b7ffe5 ] When MTU is changed, FDMA is required to calculate what is the maximum size of the frame that it can received. So it can calculate what is the page order needed to allocate for the received frames. The first problem was that, when the max MTU was calculated it was reading the value from dev and not from HW, so in this way it was missing L2 header + the FCS. The other problem was that once the skb is created using __build_skb_around, it would reserve some space for skb_shared_info. So if we received a frame which size is at the limit of the page order then the creating will failed because it would not have space to put all the data. Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: lan966x: Adjust maximum frame size when vlan is enabled/disabledHoratiu Vultur2-0/+21
[ Upstream commit 25f28bb1b4a7717a9df3aa574d210374ebb6bb23 ] When vlan filtering is enabled/disabled, it is required to adjust the maximum received frame size that it can received. When vlan filtering is enabled, it would all to receive extra 4 bytes, that are the vlan tag. So the maximum frame size would be 1522 with a vlan tag. If vlan filtering is disabled then the maximum frame size would be 1518 regardless if there is or not a vlan tag. Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: lan966x: Fix the MTU calculationHoratiu Vultur2-1/+3
[ Upstream commit 486c292230166c2d61701d3c984bf9143588ea28 ] When the MTU was changed, the lan966x didn't take in consideration the L2 header and the FCS. So the HW was configured with a smaller value than what was desired. Therefore the correct value to configure the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN. The vlan tag is not considered here, because at the time when the blamed commit was added, there was no vlan filtering support. The vlan fix will be part of the next patch. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10sfc: Fix an error handling path in efx_pci_probe()Christophe JAILLET1-2/+6
[ Upstream commit 6c412da54c80a54b1a8b7f89677f6e82f0fabec4 ] If an error occurs after the first kzalloc() the corresponding memory allocation is never freed. Add the missing kfree() in the error handling path, as already done in the remove() function. Fixes: 7e773594dada ("sfc: Separate efx_nic memory from net_device memory") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/dc114193121c52c8fa3779e49bdd99d4b41344a9.1667077009.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: tun: fix bugs for oversize packet when napi frags enabledZiyang Xuan1-1/+2
[ Upstream commit 363a5328f4b0517e59572118ccfb7c626d81dca9 ] Recently, we got two syzkaller problems because of oversize packet when napi frags enabled. One of the problems is because the first seg size of the iov_iter from user space is very big, it is 2147479538 which is bigger than the threshold value for bail out early in __alloc_pages(). And skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc reserves without __GFP_NOWARN flag. Thus we got a warning as following: ======================================================== WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 ... Call trace: __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 __alloc_pages_node include/linux/gfp.h:550 [inline] alloc_pages_node include/linux/gfp.h:564 [inline] kmalloc_large_node+0x94/0x350 mm/slub.c:4038 __kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545 __kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151 pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654 __skb_grow include/linux/skbuff.h:2779 [inline] tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477 tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835 tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036 The other problem is because odd IPv6 packets without NEXTHDR_NONE extension header and have big packet length, it is 2127925 which is bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in ipv6_gro_receive(), network_header offset and transport_header offset are all bigger than U16_MAX. That would trigger skb->network_header and skb->transport_header overflow error, because they are all '__u16' type. Eventually, it would affect the value for __skb_push(skb, value), and make it be a big value. After __skb_push() in ipv6_gro_receive(), skb->data would less than skb->head, an out of bounds memory bug occurred. That would trigger the problem as following: ================================================================== BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260 ... Call trace: dump_backtrace+0xd8/0x130 show_stack+0x1c/0x50 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0xbc/0x2e8 print_report+0x100/0x1e4 kasan_report+0x80/0x120 __asan_load8+0x78/0xa0 eth_type_trans+0x100/0x260 napi_gro_frags+0x164/0x550 tun_get_user+0xda4/0x1270 tun_chr_write_iter+0x74/0x130 do_iter_readv_writev+0x130/0x1ec do_iter_write+0xbc/0x1e0 vfs_writev+0x13c/0x26c To fix the problems, restrict the packet size less than (ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved skb space in napi_alloc_skb() because transport_header is an offset from skb->head. Add len check in tun_napi_alloc_frags() simply. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: fec: fix improper use of NETDEV_TX_BUSYZhang Changzhong1-2/+2
[ Upstream commit 06a4df5863f73af193a4ff7abf7cb04058584f06 ] The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails. Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-10net: dsa: Fix possible memory leaks in dsa_loop_init()Chen Zhongjin1-7/+18
[ Upstream commit 633efc8b3dc96f56f5a57f2a49764853a2fa3f50 ] kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: enetc: survive memory pressure without crashingVladimir Oltean1-0/+5
[ Upstream commit 84ce1ca3fe9e1249bf21176ff162200f1c4e5ed1 ] Under memory pressure, enetc_refill_rx_ring() may fail, and when called during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not checked for. An extreme case of memory pressure will result in exactly zero buffers being allocated for the RX ring, and in such a case it is expected that hardware drops all RX packets due to lack of buffers. This does not happen, because the reset-default value of the consumer and produces index is 0, and this makes the ENETC think that all buffers have been initialized and that it owns them (when in reality none were). The hardware guide explains this best: | Configure the receive ring producer index register RBaPIR with a value | of 0. The producer index is initially configured by software but owned | by hardware after the ring has been enabled. Hardware increments the | index when a frame is received which may consume one or more BDs. | Hardware is not allowed to increment the producer index to match the | consumer index since it is used to indicate an empty condition. The ring | can hold at most RBLENR[LENGTH]-1 received BDs. | | Configure the receive ring consumer index register RBaCIR. The | consumer index is owned by software and updated during operation of the | of the BD ring by software, to indicate that any receive data occupied | in the BD has been processed and it has been prepared for new data. | - If consumer index and producer index are initialized to the same | value, it indicates that all BDs in the ring have been prepared and | hardware owns all of the entries. | - If consumer index is initialized to producer index plus N, it would | indicate N BDs have been prepared. Note that hardware cannot start if | only a single buffer is prepared due to the restrictions described in | (2). | - Software may write consumer index to match producer index anytime | while the ring is operational to indicate all received BDs prior have | been processed and new BDs prepared for hardware. Normally, the value of rx_ring->rcir (consumer index) is brought in sync with the rx_ring->next_to_use software index, but this only happens if page allocation ever succeeded. When PI==CI==0, the hardware appears to receive frames and write them to DMA address 0x0 (?!), then set the READY bit in the BD. The enetc_clean_rx_ring() function (and its XDP derivative) is naturally not prepared to handle such a condition. It will attempt to process those frames using the rx_swbd structure associated with index i of the RX ring, but that structure is not fully initialized (enetc_new_page() does all of that). So what happens next is undefined behavior. To operate using no buffer, we must initialize the CI to PI + 1, which will block the hardware from advancing the CI any further, and drop everything. The issue was seen while adding support for zero-copy AF_XDP sockets, where buffer memory comes from user space, which can even decide to supply no buffers at all (example: "xdpsock --txonly"). However, the bug is present also with the network stack code, even though it would take a very determined person to trigger a page allocation failure at the perfect time (a series of ifup/ifdown under memory pressure should eventually reproduce it given enough retries). Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: Fix crash during sync firmware resetSuresh Devarakonda1-3/+3
[ Upstream commit aefb62a9988749703435e941704624949a80a2a9 ] When setting Bluefield to DPU NIC mode using mlxconfig tool + sync firmware reset flow, we run into scenario where the host was not eswitch manager at the time of mlx5 driver load but becomes eswitch manager after the sync firmware reset flow. This results in null pointer access of mpfs structure during mac filter add. This change prevents null pointer access but mpfs table entries will not be added. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Suresh Devarakonda <ramad@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: Update fw fatal reporter state on PCI handlers successful recoverRoy Novich1-0/+4
[ Upstream commit 416ef713631937cf5452476a7f1041a3ae7b06c6 ] Update devlink health fw fatal reporter state to "healthy" is needed by strictly calling devlink_health_reporter_state_update() after recovery was done by PCI error handler. This is needed when fw_fatal reporter was triggered due to PCI error. Poll health is called and set reporter state to error. Health recovery failed (since EEH didn't re-enable the PCI). PCI handlers keep on recover flow and succeed later without devlink acknowledgment. Fix this by adding devlink state update at the end of the PCI handler recovery process. Fixes: 6181e5cb752e ("devlink: add support for reporter recovery completion") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5e: TC, Reject forwarding from internal port to internal portAriel Levkovich1-1/+11
[ Upstream commit f382a2413dae8c855226a72600812a4b37432c48 ] Reject TC rules that forward from internal port to internal port as it is not supported. This include rules that are explicitly have internal port as the filter device as well as rules that apply on tunnel interfaces as the route device for the tunnel interface can be an internal port. Fixes: 27484f7170ed ("net/mlx5e: Offload tc rules that redirect to ovs internal port") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: Fix possible use-after-free in async command interfaceTariq Toukan1-5/+5
[ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ] mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: ASO, Create the ASO SQ with the correct timestamp formatSaeed Mahameed1-0/+7
[ Upstream commit 0f3caaa2c6fbf9f892bd235c9dce9eb551f8d815 ] mlx5 SQs must select the timestamp format explicitly according to the active clock mode, select the current active timestamp mode so ASO SQ create will succeed. This fixes the following error prints when trying to create ipsec ASO SQ while the timestamp format is real time mode. mlx5_cmd_out_err:778:(pid 34874): CREATE_SQ(0x904) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xd61c0b), err(-22) mlx5_aso_create_sq:285:(pid 34874): Failed to open aso wq sq, err=-22 mlx5e_ipsec_init:436:(pid 34874): IPSec initialization failed, -22 Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reported-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 11:18:48 +0300