summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-11-03net/mlx5e: Update restore chain id for slow path packetsPaul Blakey2-2/+62
[ Upstream commit 8dc47c0527c1586e3ebe0efd323f1d8abb181c77 ] Currently encap slow path rules just forward to software without setting the chain id miss register, so driver doesn't restore the chain, and packets hitting this rule will restart from tc chain 0 instead of continuing to the chain the encap rule was on. Fix this by setting the chain id miss register to the chain id mapping. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-6-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5e: Extend SKB room check to include PTP-SQAya Levin3-0/+21
[ Upstream commit 19b43a432e3e47db656a8269a74b50aef826950c ] When tx_port_ts is set, the driver diverts all UPD traffic over PTP port to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives. When the packet size is greater then MTU, the firmware might drop it and the packet won't be transmitted to the wire, hence the wire-CQE won't reach the driver. In this case the SKBs are accumulated in the SKB fifo. Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is full, driver stops the queue resulting in a TX timeout. Devlink TX-reporter can recover from it. Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: DR, Fix matcher disconnect error flowRongwei Liu1-1/+2
[ Upstream commit 4ea9891d66410da5030dababb4b825d8e41cd7bb ] When 2nd flow rules arrives, it will merge together with the 1st one if matcher criteria is the same. If merge fails, driver will rollback the merge contents, and reject the 2nd rule. At rollback stage, matcher can't be disconnected unconditionally, otherise the 1st rule can't be hit anymore. Add logic to check if the matcher should be disconnected or not. Fixes: cc2295cd54e4 ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers") Signed-off-by: Rongwei Liu <rongweil@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5: Wait for firmware to enable CRS before pci_restore_stateMoshe Shemesh1-0/+17
[ Upstream commit 212b4d7251c169f87fa734e79bdec8dd413be5cf ] After firmware reset driver should verify firmware already enabled CRS and became responsive to pci config cycles before restoring pci state. Fix that by waiting till device_id is readable through PCI again. Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-3-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net/mlx5e: Do not increment ESN when updating IPsec ESN stateHyong Youb Kim1-3/+0
[ Upstream commit 888be6b279b7257b5f6e4c9527675bff0a335596 ] An offloaded SA stops receiving after about 2^32 + replay_window packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all subsequent packets get dropped with SA-icv-failure (integrity_failed). To reproduce the bug: - ConnectX-6 Dx with crypto enabled (FW 22.30.1004) - ipsec.conf: nic-offload = yes replay-window = 32 esn = yes salifetime=24h - Run netperf for a long time to send more than 2^32 packets netperf -H <device-under-test> -t TCP_STREAM -l 20000 When 2^32 + replay_window packets are received, the replay window moves from the 2nd half of subspace (overlap=1) to the 1st half (overlap=0). The driver then updates the 'esn' value in NIC (i.e. seq_hi) as follows. seq_hi = xfrm_replay_seqhi(seq_bottom) new esn in NIC = seq_hi + 1 The +1 increment is wrong, as seq_hi already contains the correct seq_hi. For example, when seq_hi=1, the driver actually tells NIC to use seq_hi=2 (esn). This incorrect esn value causes all subsequent packets to fail integrity checks (SA-icv-failure). So, do not increment. Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN") Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failedZhengchao Shao1-4/+7
[ Upstream commit a6aa8d0ce2cfba57ac0f23293fcb3be0b9f53fba ] Remove dir in nsim_dev_debugfs_init() when creating ports dir failed. Otherwise, the netdevsim device will not be created next time. Kernel reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim' already present! Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03netdevsim: fix memory leak in nsim_drv_probe() when ↵Zhengchao Shao1-7/+13
nsim_dev_resources_register() failed [ Upstream commit 6b1da9f7126f05e857da6db24c6a04aa7974d644 ] If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80 Fixes: 37923ed6b8ce ("netdevsim: Add simple FIB resource controller via devlink") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03netdevsim: fix memory leak in nsim_bus_dev_new()Zhengchao Shao1-2/+7
[ Upstream commit cf2010aa1c739bab067cbc90b690d28eaa0b47da ] If device_register() failed in nsim_bus_dev_new(), the value of reference in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be released. unreferenced object 0xffff88810352c480 (size 16): comm "echo", pid 5691, jiffies 4294945921 (age 133.270s) hex dump (first 16 bytes): 6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00 netdevsim1...... backtrace: [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0 [<0000000094ca4fc8>] kvasprintf+0xc3/0x160 [<00000000aad09bcc>] kvasprintf_const+0x55/0x180 [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150 [<000000007c1a5d70>] dev_set_name+0xbb/0xf0 [<00000000ad0d126b>] device_add+0x1f8/0x1cb0 [<00000000c222ae24>] new_device_store+0x3b6/0x5e0 [<0000000043593421>] bus_attr_store+0x72/0xa0 [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160 [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0 [<00000000770b66e2>] vfs_write+0x8f0/0xc80 [<0000000078bb39be>] ksys_write+0x106/0x210 [<00000000005e55a4>] do_syscall_64+0x35/0x80 [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 40e4fe4ce115 ("netdevsim: move device registration and related code to bus.c") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026015405.128795-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: broadcom: bcm4908_enet: update TX stats after actual transmissionRafał Miłecki1-4/+8
[ Upstream commit ef3556ee16c68735ec69bd08df41d1cd83b14ad3 ] Queueing packets doesn't guarantee their transmission. Update TX stats after hardware confirms consuming submitted data. This also fixes a possible race and NULL dereference. bcm4908_enet_start_xmit() could try to access skb after freeing it in the bcm4908_enet_poll_tx(). Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: bcmsysport: Indicate MAC is in charge of PHY PMFlorian Fainelli1-0/+3
[ Upstream commit 9f172134dde7e4f5bf4b9139f23a1e741ec1c36e ] Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT driver essentially does exactly what mdio_bus_phy_resume() does by calling phy_resume(). Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221025234201.2549360-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: ehea: fix possible memory leak in ehea_register_port()Yang Yingliang1-0/+1
[ Upstream commit 0e7ce23a917a9cc83ca3c779fbba836bca3bcf1e ] If of_device_register() returns error, the of node and the name allocated in dev_set_name() is leaked, call put_device() to give up the reference that was set in device_initialize(), so that of node is put in logical_port_release() and the name is freed in kobject_cleanup(). Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: ethernet: ave: Fix MAC to be in charge of PHY PMKunihiko Hayashi1-0/+6
[ Upstream commit e2badb4bd33abe13ddc35975bd7f7f8693955a4b ] The phylib callback is called after MAC driver's own resume callback is called. For AVE driver, after resuming immediately, PHY state machine is in PHY_NOLINK because there is a time lag from link-down to link-up due to autoneg. The result is WARN_ON() dump in mdio_bus_phy_resume(). Since ave_resume() itself calls phy_resume(), AVE driver should manage PHY PM. To indicate that MAC driver manages PHY PM, set phydev->mac_managed_pm to true to avoid the unnecessary phylib call and add missing phy_init_hw() to ave_resume(). Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20221024072227.24769-1-hayashi.kunihiko@socionext.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: fec: limit register access on i.MX6ULJuergen Borleis1-2/+44
[ Upstream commit 0a8b43b12dd78daa77a7dc007b92770d262a2714 ] Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash: Unhandled fault: external abort on non-linefetch (0x1008) at […] due to this SoC has less registers in its FEC implementation compared to other i.MX6 variants. Thus, a run-time decision is required to avoid access to non-existing registers. Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device") Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()Yang Yingliang1-1/+1
[ Upstream commit 5da6d65590a0698199df44d095e54b0ed1708178 ] pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() while unbinding device. Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba1-33/+38
[ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ] Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch2-11/+33
[ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ] When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba2-8/+27
[ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ] When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error pathDongliang Mu1-1/+4
[ Upstream commit b1a09b63684cea56774786ca14c13b7041ffee63 ] In mcp251x_can_probe(), if mcp251x_gpio_setup() fails, it forgets to unregister the CAN device. Fix this by unregistering can device in mcp251x_can_probe(). Fixes: 2d52dabbef60 ("can: mcp251x: add GPIO support") Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/all/20221024090256.717236-1-dzm91@hust.edu.cn [mkl: adjust label] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error pathDongliang Mu1-3/+5
[ Upstream commit 3e5b3418827cefb5e1cc658806f02965791b8f07 ] The commit 1149108e2fbf ("can: mscan: improve clock API use") only adds put_clock() in mpc5xxx_can_remove() function, forgetting to add put_clock() in the error handling code. Fix this bug by adding put_clock() in the error handling code. Fixes: 1149108e2fbf ("can: mscan: improve clock API use") Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: lan966x: Stop replacing tx dcbs and dcbs_buf when changing MTUHoratiu Vultur1-21/+3
[ Upstream commit 4a4b6848d1e932b977e6a00cda393adf7e839ff8 ] When a frame is sent using FDMA, the skb is mapped and then the mapped address is given to an tx dcb that is different than the last used tx dcb. Once the HW finish with this frame, it would generate an interrupt and then the dcb can be reused and memory can be freed. For each dcb there is an dcb buf that contains some meta-data(is used by PTP, is it free). There is 1 to 1 relationship between dcb and dcb_buf. The following issue was observed. That sometimes after changing the MTU to allocate new tx dcbs and dcbs_buf, two frames were not transmitted. The frames were not transmitted because when reloading the tx dcbs, it was always presuming to use the first dcb but that was not always happening. Because it could be that the last tx dcb used before changing MTU was first dcb and then when it tried to get the next dcb it would take dcb 1 instead of 0. Because it is supposed to take a different dcb than the last used one. This can be fixed simply by changing tx->last_in_use to -1 when the fdma is disabled to reload the new dcb and dcbs_buff. But there could be a different issue. For example, right after the frame is sent, the MTU is changed. Now all the dcbs and dcbs_buf will be cleared. And now get the interrupt from HW that it finished with the frame. So when we try to clear the skb, it is not possible because we lost all the dcbs_buf. The solution here is to stop replacing the tx dcbs and dcbs_buf when changing MTU because the TX doesn't care what is the MTU size, it is only the RX that needs this information. Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221021090711.3749009-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSYZhang Changzhong1-1/+0
[ Upstream commit 9c1eaa27ec599fcc25ed4970c0b73c247d147a2b ] The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03atlantic: fix deadlock at aq_nic_stopÍñigo Huguet2-24/+74
[ Upstream commit 6960d133f66ecddcd3af2b1cbd0c7dcd104268b8 ] NIC is stopped with rtnl_lock held, and during the stop it cancels the 'service_task' work and free irqs. However, if CONFIG_MACSEC is set, rtnl_lock is acquired both from aq_nic_service_task and aq_linkstate_threaded_isr. Then a deadlock happens if aq_nic_stop tries to cancel/disable them when they've already started their execution. As the deadlock is caused by rtnl_lock, it causes many other processes to stall, not only atlantic related stuff. Fix it by introducing a mutex that protects each NIC's macsec related data, and locking it instead of the rtnl_lock from the service task and the threaded IRQ. Before this patch, all macsec data was protected with rtnl_lock, but maybe not all of it needs to be protected. With this new mutex, further efforts can be made to limit the protected data only to that which requires it. However, probably it doesn't worth it because all macsec's data accesses are infrequent, and almost all are done from macsec_ops or ethtool callbacks, called holding rtnl_lock, so macsec_mutex won't never be much contended. The issue appeared repeteadly attaching and deattaching the NIC to a bond interface. Doing that after this patch I cannot reproduce the bug. Fixes: 62c1c2e606f6 ("net: atlantic: MACSec offload skeleton") Reported-by: Li Liang <liali@redhat.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03amd-xgbe: add the bit rate quirk for Molex cablesRaju Rangoju1-1/+8
[ Upstream commit 170a9e341a3b02c0b2ea0df16ef14a33a4f41de8 ] The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex passive cables have the rate ceiling 0x78 at offset 12. Add a quirk for Molex passive cables to extend the rate ceiling to 0x78. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03amd-xgbe: fix the SFP compliance codes check for DAC cablesRaju Rangoju1-4/+4
[ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ] The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03amd-xgbe: Yellow carp devices do not need rrcRaju Rangoju3-1/+7
[ Upstream commit f97fc7ef414603189d5ba6f529407c5341c03c2a ] Link stability issues are noticed on Yellow carp platforms when Receiver Reset Cycle is issued. Since the CDR workaround is disabled on these platforms, the Receiver Reset Cycle is not needed. So, avoid issuing rrc on Yellow carp platforms. Fixes: dbb6c58b5a61 ("net: amd-xgbe: Add Support for Yellow Carp Ethernet device") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: macb: Specify PHY PM management done by MACSergiu Moga1-0/+1
[ Upstream commit 15a9dbec631cd69dfbbfc4e2cbf90c9dd8432a8f ] The `macb_resume`/`macb_suspend` methods already call the `phylink_start`/`phylink_stop` methods during their execution so explicitly say that the PM of the PHY is done by MAC by using the `mac_managed_pm` flag of the `struct phylink_config`. This also fixes the warning message issued during resume: WARNING: CPU: 0 PID: 237 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0x144/0x148 Depends-on: 96de900ae78e ("net: phylink: add mac_managed_pm in phylink_config structure") Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221019120929.63098-1-sergiu.moga@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: hinic: fix the issue of double release MBOX callback of VFZhengchao Shao1-1/+0
[ Upstream commit 8ec2f4c6b2e11a4249bba77460f0cfe6d95a82f8 ] In hinic_vf_func_init(), if VF fails to register information with PF through the MBOX, the MBOX callback function of VF is released once. But it is released again in hinic_init_hwdev(). Remove one. Fixes: 7dd29ee12865 ("hinic: add sriov feature support") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: hinic: fix the issue of CMDQ memory leaksZhengchao Shao1-1/+1
[ Upstream commit 363cc87767f6ddcfb9158ad2e2afa2f8d5c4b94e ] When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is not released correctly. Fix it. Fixes: 72ef908bb3ff ("hinic: add three net_device_ops of vf") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: hinic: fix memory leak when reading function tableZhengchao Shao1-6/+12
[ Upstream commit 4c1f602df8956bc0decdafd7e4fc7eef50c550b1 ] When the input parameter idx meets the expected case option in hinic_dbg_get_func_table(), read_data is not released. Fix it. Fixes: 5215e16244ee ("hinic: add support to query function table") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()Zhengchao Shao1-1/+1
[ Upstream commit c0605cd6750f2db9890c43a91ea4d77be8fb4908 ] The value of lli_credit_cnt is incorrectly assigned, fix it. Fixes: a0337c0dee68 ("hinic: add support to set and get irq coalesce") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: lan966x: Fix the rx drop counterHoratiu Vultur1-1/+9
[ Upstream commit f8c1c66b99a570c08b9d26e4347276f00e49bba7 ] Currently the rx drop is calculated as the sum of multiple HW drop counters. The issue is that not all the HW drop counters were added for the rx drop counter. So if for example you have a police that drops frames, they were not see in the rx drop counter. Fix this by updating how the rx drop counter is calculated. It is required to add also RX_RED_PRIO_* HW counters. Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221019083056.2744282-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03net: netsec: fix error handling in netsec_register_mdio()Yang Yingliang1-0/+2
[ Upstream commit 94423589689124e8cd145b38a1034be7f25835b2 ] If phy_device_register() fails, phy_device_free() need be called to put refcount, so memory of phy device and device name can be freed in callback function. If get_phy_device() fails, mdiobus_unregister() need be called, or it will cause warning in mdiobus_free() and kobject is leaked. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03can: rcar_canfd: fix channel specific IRQ handling for RZ/G2LBiju Das1-11/+7
commit d887087c896881715c1a82f1d4f71fbfe5344ffd upstream. RZ/G2L has separate channel specific IRQs for transmit and error interrupts. But the IRQ handler processes both channels, even if there no interrupt occurred on one of the channels. This patch fixes the issue by passing a channel specific context parameter instead of global one for the IRQ register and the IRQ handler, it just handles the channel which is triggered the interrupt. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-3-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global ↵Biju Das1-2/+4
FIFO receive commit 702de2c21eed04c67cefaaedc248ef16e5f6b293 upstream. We are seeing an IRQ storm on the global receive IRQ line under heavy CAN bus load conditions with both CAN channels enabled. Conditions: The global receive IRQ line is shared between can0 and can1, either of the channels can trigger interrupt while the other channel's IRQ line is disabled (RFIE). When global a receive IRQ interrupt occurs, we mask the interrupt in the IRQ handler. Clearing and unmasking of the interrupt is happening in rx_poll(). There is a race condition where rx_poll() unmasks the interrupt, but the next IRQ handler does not mask the IRQ due to NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and can1 is triggering RX interrupt, the delay in rx_poll() processing results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm. This patch fixes the issue by checking IRQ active and enabled before handling the IRQ on a particular channel. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-2-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03can: kvaser_usb: Fix possible completions during init_completionAnssi Hannula2-4/+4
commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream. kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29wifi: mt76: mt7921e: fix random fw download failDeren Wu3-0/+5
[ Upstream commit 29e247ece5d3edfa71495768a9ab5fc7bba76bd4 ] In case of PCIe interoperability problem shows up, the firmware payload may be corrupted in download stage. Turn off L0s to keep fw download process accurately. [ 1093.528363] mt7921e 0000:3b:00.0: Message 00000007 (seq 7) timeout [ 1093.528414] mt7921e 0000:3b:00.0: Failed to start patch [ 1096.600156] mt7921e 0000:3b:00.0: Message 00000010 (seq 8) timeout [ 1096.600207] mt7921e 0000:3b:00.0: Failed to release patch semaphore [ 1097.699031] mt7921e 0000:3b:00.0: Timeout for driver own [ 1098.758427] mt7921e 0000:3b:00.0: Timeout for driver own [ 1099.834408] mt7921e 0000:3b:00.0: Timeout for driver own [ 1100.915264] mt7921e 0000:3b:00.0: Timeout for driver own [ 1101.990625] mt7921e 0000:3b:00.0: Timeout for driver own [ 1103.077587] mt7921e 0000:3b:00.0: Timeout for driver own [ 1104.173258] mt7921e 0000:3b:00.0: Timeout for driver own [ 1105.248466] mt7921e 0000:3b:00.0: Timeout for driver own [ 1106.336969] mt7921e 0000:3b:00.0: Timeout for driver own [ 1106.397542] mt7921e 0000:3b:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: phy: dp83822: disable MDI crossover status change interruptFelix Riemann1-2/+1
[ Upstream commit 7f378c03aa4952507521174fb0da7b24a9ad0be6 ] If the cable is disconnected the PHY seems to toggle between MDI and MDI-X modes. With the MDI crossover status interrupt active this causes roughly 10 interrupts per second. As the crossover status isn't checked by the driver, the interrupt can be disabled to reduce the interrupt load. Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Felix Riemann <felix.riemann@sma.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: hns: fix possible memory leak in hnae_ae_register()Yang Yingliang1-1/+3
[ Upstream commit ff2f5ec5d009844ec28f171123f9e58750cef4bf ] Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf] Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()Yang Yingliang1-1/+1
[ Upstream commit 258ad2fe5ede773625adfda88b173f4123e59f45 ] Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff88810152ad20 (size 8): comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s) hex dump (first 8 bytes): 68 77 73 69 6d 30 00 ff hwsim0.. backtrace: [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000c0228a5e>] kvasprintf+0xb5/0x140 [<00000000cff8c21f>] kvasprintf_const+0x55/0x180 [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150 [<000000000a80b139>] dev_set_name+0xab/0xe0 Fixes: f36a111a74e7 ("wwan_hwsim: WWAN device simulator") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29sfc: include vport_id in filter spec hash and equal()Pieter Jansen van Vuuren2-7/+7
[ Upstream commit c2bf23e4a5af37a4d77901d9ff14c50a269f143d ] Filters on different vports are qualified by different implicit MACs and/or VLANs, so shouldn't be considered equal even if their other match fields are identical. Fixes: 7c460d9be610 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10") Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29ionic: catch NULL pointer issue on reconfigBrett Creeley1-4/+8
[ Upstream commit aa1d7e1267c12e07d979aa34c613716a89029db2 ] It's possible that the driver will dereference a qcq that doesn't exist when calling ionic_reconfigure_queues(), which causes a page fault BUG. If a reduction in the number of queues is followed by a different reconfig such as changing the ring size, the driver can hit a NULL pointer when trying to clean up non-existent queues. Fix this by checking to make sure both the qcqs array and qcq entry exists bofore trying to use and free the entry. Fixes: 101b40a0171f ("ionic: change queue count with no reset") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29bnxt_en: fix memory leak in bnxt_nvm_test()Vikas Gupta1-5/+6
[ Upstream commit ba077d683d45190afc993c1ce45bcdbfda741a40 ] Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: ethernet: mtk_eth_wed: add missing of_node_put()Yang Yingliang1-1/+4
[ Upstream commit e0bb4659e235770e6f53b3692e958591f49448f5 ] The device_node pointer returned by of_parse_phandle() with refcount incremented, when finish using it, the refcount need be decreased. Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: ethernet: mtk_eth_wed: add missing put_device() in mtk_wed_add_hw()Yang Yingliang1-2/+8
[ Upstream commit 9d4f20a476ca57e4c9246eb1fa2a61bea2354720 ] After calling get_device() in mtk_wed_add_hw(), in error path, put_device() needs be called. Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()Yang Yingliang1-5/+12
[ Upstream commit b3d0d98179d62f9d55635a600679c4fa362baf8d ] If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called in error path or removing module to free the memory allocated in mtk_wed_add_hw(). Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: stmmac: Enable mac_managed_pm phylink configShenwei Wang1-0/+1
[ Upstream commit f151c147b3afcf92dedff53f5f0e965414e4fd2c ] Enable the mac_managed_pm configuration in the phylink_config structure to avoid the kernel warning during system resume. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: phylink: add mac_managed_pm in phylink_config structureShenwei Wang1-0/+3
[ Upstream commit 96de900ae78e7dbedc937fd91bafe2934579c65a ] The recent commit 'commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")' requires the MAC driver explicitly tell the phy driver who is managing the PM, otherwise you will see warning during resume stage. Add a boolean property in the phylink_config structure so that the MAC driver can use it to tell the PHY driver if it wants to manage the PM. Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29net: phy: dp83867: Extend RX strap quirk for SGMII modeHarini Katakam1-0/+8
[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ] When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29sfc: Change VF mac via PF as first preference if available.Jonathan Cooper1-34/+24
[ Upstream commit a8aed7b35becfd21f22a77c7014029ea837b018f ] Changing a VF's mac address through the VF (rather than via the PF) fails with EPERM because the latter part of efx_ef10_set_mac_address attempts to change the vport mac address list as the VF. Even with this fixed it still fails with EBUSY because the vadaptor is still assigned on the VF - the vadaptor reassignment must be within a section where the VF has torn down its state. A major reason this has broken is because we have two functions that ostensibly do the same thing - have a PF and VF cooperate to change a VF mac address. Rather than do this, if we are changing the mac of a VF that has a link to the PF in the same VM then simply call sriov_set_vf_mac instead, which is a proven working function that does that. If there is no PF available, or that fails non-fatally, then attempt to change the VF's mac address as we would a PF, without updating the PF's data. Test case: Create a VF: echo 1 > /sys/class/net/<if>/device/sriov_numvfs Set the mac address of the VF directly: ip link set <vf> addr 00:11:22:33:44:55 Set the MAC address of the VF via the PF: ip link set <pf> vf 0 mac 00:11:22:33:44:66 Without this patch the last command will fail with ENOENT. Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Reported-by: Íñigo Huguet <ihuguet@redhat.com> Fixes: 910c8789a777 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC") Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29i40e: Fix DMA mappings leakJan Sokolowski6-28/+74
[ Upstream commit aae425efdfd1b1d8452260a3cb49344ebf20b1f5 ] During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 10:51:35 +0300