summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10r8169: work around short packet hw bug on RTL8125Heiner Kallweit1-3/+11
[ Upstream commit 2aaf09a0e7842b3ac7be6e0b8fb1888b3daeb3b3 ] Network problems with RTL8125B have been reported [0] and with help from Realtek it turned out that this chip version has a hw problem with short packets (similar to RTL8168evl). Having said that activate the same workaround as for RTL8168evl. Realtek suggested to activate the workaround for RTL8125A too, even though they're not 100% sure yet which RTL8125 versions are affected. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 Fixes: 0439297be951 ("r8169: add support for RTL8125B") Reported-by: Maxim Plotnikov <wgh@torlan.ru> Tested-by: Maxim Plotnikov <wgh@torlan.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: dsa: qca8k: Fix port MTU settingJonathan McDowell1-2/+2
[ Upstream commit 99cab7107d914a71c57f5a4e6d34292425fbbb61 ] The qca8k only supports a switch-wide MTU setting, and the code to take the max of all ports was only looking at the port currently being set. Fix to examine all ports. Reported-by: DENG Qingfang <dqfext@gmail.com> Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks") Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201030183315.GA6736@earth.li Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: fec: fix MDIO probing for some FEC hardware blocksGreg Ungerer2-13/+22
[ Upstream commit 1e6114f51f9d4090390fcec2f5d67d8cc8dc4bfc ] Some (apparently older) versions of the FEC hardware block do not like the MMFR register being cleared to avoid generation of MII events at initialization time. The action of clearing this register results in no future MII events being generated at all on the problem block. This means the probing of the MDIO bus will find no PHYs. Create a quirk that can be checked at the FECs MII init time so that the right thing is done. The quirk is set as appropriate for the FEC hardware blocks that are known to need this. Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Fugang Duan <fugand.duan@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10sfp: Fix error handing in sfp_probe()YueHaibing1-1/+2
[ Upstream commit 9621618130bf7e83635367c13b9a6ee53935bb37 ] gpiod_to_irq() never return 0, but returns negative in case of error, check it and set gpio_irq to 0. Fixes: 73970055450e ("sfp: add SFP module support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201031031053.25264-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10powerpc/vnic: Extend "failover pending" windowSukadev Bhattiprolu1-4/+32
[ Upstream commit 1d8504937478fdc2f3ef2174a816fd3302eca882 ] Commit 5a18e1e0c193b introduced the 'failover_pending' state to track the "failover pending window" - where we wait for the partner to become ready (after a transport event) before actually attempting to failover. i.e window is between following two events: a. we get a transport event due to a FAILOVER b. later, we get CRQ_INITIALIZED indicating the partner is ready at which point we schedule a FAILOVER reset. and ->failover_pending is true during this window. If during this window, we attempt to open (or close) a device, we pretend that the operation succeded and let the FAILOVER reset path complete the operation. This is fine, except if the transport event ("a" above) occurs during the open and after open has already checked whether a failover is pending. If that happens, we fail the open, which can cause the boot scripts to leave the interface down requiring administrator to manually bring up the device. This fix "extends" the failover pending window till we are _actually_ ready to perform the failover reset (i.e until after we get the RTNL lock). Since open() holds the RTNL lock, we can be sure that we either finish the open or if the open() fails due to the failover pending window, we can again pretend that open is done and let the failover complete it. We could try and block the open until failover is completed but a) that could still timeout the application and b) Existing code "pretends" that failover occurred "just after" open succeeded, so marks the open successful and lets the failover complete the open. So, mark the open successful even if the transport event occurs before we actually start the open. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Acked-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20201030170711.1562994-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: usb: qmi_wwan: add Telit LE910Cx 0x1230 compositionDaniele Palmas1-0/+1
[ Upstream commit 5fd8477ed8ca77e64b93d44a6dae4aa70c191396 ] Add support for Telit LE910Cx 0x1230 composition: 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201102110108.17244-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisementGrygorii Strashko2-5/+1
[ Upstream commit 0a26ba0603d637eb6673a2ea79808cc73909ef3a ] The TI CPTS does not natively support PTPv1, only PTPv2. But, as it happens, the CPTS can provide HW timestamp for PTPv1 Sync messages, because CPTS HW parser looks for PTP messageType id in PTP message octet 0 which value is 0 for PTPv1. As result, CPTS HW can detect Sync messages for PTPv1 and PTPv2 (Sync messageType = 0 for both), but it fails for any other PTPv1 messages (Delay_req/resp) and will return PTP messageType id 0 for them. The commit e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") added PTPv1 hw timestamping advertisement by mistake, only to make Linux Kernel "timestamping" utility work, and this causes issues with only PTPv1 compatible HW/SW - Sync HW timestamped, but Delay_req/resp are not. Hence, fix it disabling PTPv1 hw timestamping advertisement, so only PTPv1 compatible HW/SW can properly roll back to SW timestamping. Fixes: e9523a5a32a1 ("net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filter") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201029190910.30789-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ionic: check port ptr before useShannon Nelson1-0/+5
[ Upstream commit 2bcbf42add911ef63a6d90e92001dc2bcb053e68 ] Check for corner case of port_init failure before using the port_info pointer. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10gianfar: Account for Tx PTP timestamp in the skb headroomClaudiu Manoil1-1/+1
[ Upstream commit d6a076d68c6b5d6a5800f3990a513facb7016dea ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on the second option, using skb_realloc_headroom() to create a new skb to accommodate PTP frames. Turns out that this method is not reliable, as reallocation of skbs for PTP frames along with the required overhead (skb_set_owner_w, consume_skb) is causing random crashes in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time on the same device (as seen in James' report). Note that these crashes don't occur with a single TCP stream, nor with multiple concurrent UDP streams, but only when multiple TCP streams are run concurrently with the PTP packet flow (doing skb reallocation). This patch enforces the first method, by requesting enough headroom from the stack to accommodate PTP frames, and so avoiding skb_realloc_headroom() & co, and the crashes no longer occur. There's no reason not to set needed_headroom to a large enough value to accommodate PTP frames, so in this regard this patch is a fix. Reported-by: James Jurack <james.jurack@ametek.com> Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10gianfar: Replace skb_realloc_headroom with skb_cow_head for PTPClaudiu Manoil1-10/+2
[ Upstream commit d145c9031325fed963a887851d9fa42516efd52b ] When PTP timestamping is enabled on Tx, the controller inserts the Tx timestamp at the beginning of the frame buffer, between SFD and the L2 frame header. This means that the skb provided by the stack is required to have enough headroom otherwise a new skb needs to be created by the driver to accommodate the timestamp inserted by h/w. Up until now the driver was relying on skb_realloc_headroom() to create new skbs to accommodate PTP frames. Turns out that this method is not reliable in this context at least, as skb_realloc_headroom() for PTP frames can cause random crashes, mostly in subsequent skb_*() calls, when multiple concurrent TCP streams are run at the same time with the PTP flow on the same device (as seen in James' report). I also noticed that when the system is loaded by sending multiple TCP streams, the driver receives cloned skbs in large numbers. skb_cow_head() instead proves to be stable in this scenario, and not only handles cloned skbs too but it's also more efficient and widely used in other drivers. The commit introducing skb_realloc_headroom in the driver goes back to 2009, commit 93c1285c5d92 ("gianfar: reallocate skb when headroom is not enough for fcb"). For practical purposes I'm referencing a newer commit (from 2012) that brings the code to its current structure (and fixes the PTP case). Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping") Reported-by: James Jurack <james.jurack@ametek.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10dpaa_eth: fix the RX headroom size alignmentCamelia Groza1-5/+9
[ Upstream commit 7834e494f42627769d3f965d5d203e9c6ddb8403 ] The headroom reserved for received frames needs to be aligned to an RX specific value. There is currently a discrepancy between the values used in the Ethernet driver and the values passed to the FMan. Coincidentally, the resulting aligned values are identical. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10dpaa_eth: update the buffer layout for non-A050385 erratum scenariosCamelia Groza1-6/+10
[ Upstream commit acef159a0cb2a978d62b641e2366a33ad1d5afef ] Impose a larger RX private data area only when the A050385 erratum is present on the hardware. A smaller buffer size is sufficient in all other scenarios. This enables a wider range of linear Jumbo frame sizes in non-erratum scenarios, instead of turning to multi buffer Scatter/Gather frames. The maximum linear frame size is increased by 128 bytes for non-erratum arm64 platforms. Cleanup the hardware annotations header defines in the process. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10cadence: force nonlinear buffers to be clonedMark Deneen1-1/+2
[ Upstream commit 403dc16796f5516acf23d94a1cd9eba564d03210 ] In my test setup, I had a SAMA5D27 device configured with ip forwarding, and second device with usb ethernet (r8152) sending ICMP packets.  If the packet was larger than about 220 bytes, the SAMA5 device would "oops" with the following trace: kernel BUG at net/core/skbuff.c:1863! Internal error: Oops - BUG: 0 [#1] ARM Modules linked in: xt_MASQUERADE ppp_async ppp_generic slhc iptable_nat xt_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 can_raw can bridge stp llc ipt_REJECT nf_reject_ipv4 sd_mod cdc_ether usbnet usb_storage r8152 scsi_mod mii o ption usb_wwan usbserial micrel macb at91_sama5d2_adc phylink gpio_sama5d2_piobu m_can_platform m_can industrialio_triggered_buffer kfifo_buf of_mdio can_dev fixed_phy sdhci_of_at91 sdhci_pltfm libphy sdhci mmc_core ohci_at91 ehci_atmel o hci_hcd iio_rescale industrialio sch_fq_codel spidev prox2_hal(O) CPU: 0 PID: 0 Comm: swapper Tainted: G           O      5.9.1-prox2+ #1 Hardware name: Atmel SAMA5 PC is at skb_put+0x3c/0x50 LR is at macb_start_xmit+0x134/0xad0 [macb] pc : [<c05258cc>]    lr : [<bf0ea5b8>]    psr: 20070113 sp : c0d01a60  ip : c07232c0  fp : c4250000 r10: c0d03cc8  r9 : 00000000  r8 : c0d038c0 r7 : 00000000  r6 : 00000008  r5 : c59b66c0  r4 : 0000002a r3 : 8f659eff  r2 : c59e9eea  r1 : 00000001  r0 : c59b66c0 Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none Control: 10c53c7d  Table: 2640c059  DAC: 00000051 Process swapper (pid: 0, stack limit = 0x75002d81) <snipped stack> [<c05258cc>] (skb_put) from [<bf0ea5b8>] (macb_start_xmit+0x134/0xad0 [macb]) [<bf0ea5b8>] (macb_start_xmit [macb]) from [<c053e504>] (dev_hard_start_xmit+0x90/0x11c) [<c053e504>] (dev_hard_start_xmit) from [<c0571180>] (sch_direct_xmit+0x124/0x260) [<c0571180>] (sch_direct_xmit) from [<c053eae4>] (__dev_queue_xmit+0x4b0/0x6d0) [<c053eae4>] (__dev_queue_xmit) from [<c05a5650>] (ip_finish_output2+0x350/0x580) [<c05a5650>] (ip_finish_output2) from [<c05a7e24>] (ip_output+0xb4/0x13c) [<c05a7e24>] (ip_output) from [<c05a39d0>] (ip_forward+0x474/0x500) [<c05a39d0>] (ip_forward) from [<c05a13d8>] (ip_sublist_rcv_finish+0x3c/0x50) [<c05a13d8>] (ip_sublist_rcv_finish) from [<c05a19b8>] (ip_sublist_rcv+0x11c/0x188) [<c05a19b8>] (ip_sublist_rcv) from [<c05a2494>] (ip_list_rcv+0xf8/0x124) [<c05a2494>] (ip_list_rcv) from [<c05403c4>] (__netif_receive_skb_list_core+0x1a0/0x20c) [<c05403c4>] (__netif_receive_skb_list_core) from [<c05405c4>] (netif_receive_skb_list_internal+0x194/0x230) [<c05405c4>] (netif_receive_skb_list_internal) from [<c0540684>] (gro_normal_list.part.0+0x14/0x28) [<c0540684>] (gro_normal_list.part.0) from [<c0541280>] (napi_complete_done+0x16c/0x210) [<c0541280>] (napi_complete_done) from [<bf14c1c0>] (r8152_poll+0x684/0x708 [r8152]) [<bf14c1c0>] (r8152_poll [r8152]) from [<c0541424>] (net_rx_action+0x100/0x328) [<c0541424>] (net_rx_action) from [<c01012ec>] (__do_softirq+0xec/0x274) [<c01012ec>] (__do_softirq) from [<c012d6d4>] (irq_exit+0xcc/0xd0) [<c012d6d4>] (irq_exit) from [<c0160960>] (__handle_domain_irq+0x58/0xa4) [<c0160960>] (__handle_domain_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0d01ef0 to 0xc0d01f38) 1ee0:                                     00000000 0000003d 0c31f383 c0d0fa00 1f00: c0d2eb80 00000000 c0d2e630 4dad8c49 4da967b0 0000003d 0000003d 00000000 1f20: fffffff5 c0d01f40 c04e0f88 c04e0f8c 30070013 ffffffff [<c0100b0c>] (__irq_svc) from [<c04e0f8c>] (cpuidle_enter_state+0x7c/0x378) [<c04e0f8c>] (cpuidle_enter_state) from [<c04e12c4>] (cpuidle_enter+0x28/0x38) [<c04e12c4>] (cpuidle_enter) from [<c014f710>] (do_idle+0x194/0x214) [<c014f710>] (do_idle) from [<c014fa50>] (cpu_startup_entry+0xc/0x14) [<c014fa50>] (cpu_startup_entry) from [<c0a00dc8>] (start_kernel+0x46c/0x4a0) Code: e580c054 8a000002 e1a00002 e8bd8070 (e7f001f2) ---[ end trace 146c8a334115490c ]--- The solution was to force nonlinear buffers to be cloned.  This was previously reported by Klaus Doth (https://www.spinics.net/lists/netdev/msg556937.html) but never formally submitted as a patch. This is the third revision, hopefully the formatting is correct this time! Suggested-by: Klaus Doth <krnl@doth.eu> Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Mark Deneen <mdeneen@saucontech.com> Link: https://lore.kernel.org/r/20201030155814.622831-1-mdeneen@saucontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05bnxt_en: Log unknown link speed appropriately.Michael Chan1-1/+5
[ Upstream commit 8eddb3e7ce124dd6375d3664f1aae13873318b0f ] If the VF virtual link is set to always enabled, the speed may be unknown when the physical link is down. The driver currently logs the link speed as 4294967295 Mbps which is SPEED_UNKNOWN. Modify the link up log message as "speed unknown" which makes more sense. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-7-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drivers/net/wan/hdlc_fr: Correctly handle special skb->protocol valuesXie He1-47/+51
[ Upstream commit 8306266c1d51aac9aa7aa907fe99032a58c6382c ] The fr_hard_header function is used to prepend the header to skbs before transmission. It is used in 3 situations: 1) When a control packet is generated internally in this driver; 2) When a user sends an skb on an Ethernet-emulating PVC device; 3) When a user sends an skb on a normal PVC device. These 3 situations need to be handled differently by fr_hard_header. Different headers should be prepended to the skb in different situations. Currently fr_hard_header distinguishes these 3 situations using skb->protocol. For situation 1 and 2, a special skb->protocol value will be assigned before calling fr_hard_header, so that it can recognize these 2 situations. All skb->protocol values other than these special ones are treated by fr_hard_header as situation 3. However, it is possible that in situation 3, the user sends an skb with one of the special skb->protocol values. In this case, fr_hard_header would incorrectly treat it as situation 1 or 2. This patch tries to solve this issue by using skb->dev instead of skb->protocol to distinguish between these 3 situations. For situation 1, skb->dev would be NULL; for situation 2, skb->dev->type would be ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI. This way fr_hard_header would be able to distinguish these 3 situations correctly regardless what skb->protocol value the user tries to use in situation 3. Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: change to disable softirqs for ath11k_regd_update to solve deadlockWen Gong1-3/+3
[ Upstream commit df648808c6b9989555e247530d8ca0ad0094b361 ] After base_lock which occupy by ath11k_regd_update, the softirq run for WMI_REG_CHAN_LIST_CC_EVENTID maybe arrived and it also need to accuire the spin lock, then deadlock happend, change to disable softirqis to solve it. [ 235.576990] ================================ [ 235.576991] WARNING: inconsistent lock state [ 235.576993] 5.9.0-rc5-wt-ath+ #196 Not tainted [ 235.576994] -------------------------------- [ 235.576995] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 235.576997] kworker/u16:1/98 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 235.576998] ffff9655f75cad98 (&ab->base_lock){+.?.}-{2:2}, at: ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577009] {IN-SOFTIRQ-W} state was registered at: [ 235.577013] __lock_acquire+0x219/0x6e0 [ 235.577015] lock_acquire+0xb6/0x270 [ 235.577018] _raw_spin_lock+0x2c/0x70 [ 235.577023] ath11k_reg_chan_list_event.isra.0+0x10d/0x1e0 [ath11k] [ 235.577028] ath11k_wmi_tlv_op_rx+0x3c3/0x560 [ath11k] [ 235.577033] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k] [ 235.577039] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k] [ 235.577041] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci] [ 235.577043] tasklet_action_common.constprop.0+0xd4/0xf0 [ 235.577045] __do_softirq+0xc9/0x482 [ 235.577046] asm_call_on_stack+0x12/0x20 [ 235.577048] do_softirq_own_stack+0x49/0x60 [ 235.577049] irq_exit_rcu+0x9a/0xd0 [ 235.577050] common_interrupt+0xa1/0x190 [ 235.577052] asm_common_interrupt+0x1e/0x40 [ 235.577053] cpu_idle_poll.isra.0+0x2e/0x60 [ 235.577055] do_idle+0x5f/0xe0 [ 235.577056] cpu_startup_entry+0x14/0x20 [ 235.577058] start_kernel+0x443/0x464 [ 235.577060] secondary_startup_64+0xa4/0xb0 [ 235.577061] irq event stamp: 432035 [ 235.577063] hardirqs last enabled at (432035): [<ffffffff968d12b4>] _raw_spin_unlock_irqrestore+0x34/0x40 [ 235.577064] hardirqs last disabled at (432034): [<ffffffff968d10d3>] _raw_spin_lock_irqsave+0x63/0x80 [ 235.577066] softirqs last enabled at (431998): [<ffffffff967115c1>] inet6_fill_ifla6_attrs+0x3f1/0x430 [ 235.577067] softirqs last disabled at (431996): [<ffffffff9671159f>] inet6_fill_ifla6_attrs+0x3cf/0x430 [ 235.577068] [ 235.577068] other info that might help us debug this: [ 235.577069] Possible unsafe locking scenario: [ 235.577069] [ 235.577070] CPU0 [ 235.577070] ---- [ 235.577071] lock(&ab->base_lock); [ 235.577072] <Interrupt> [ 235.577073] lock(&ab->base_lock); [ 235.577074] [ 235.577074] *** DEADLOCK *** [ 235.577074] [ 235.577075] 3 locks held by kworker/u16:1/98: [ 235.577076] #0: ffff9655f75b1d48 ((wq_completion)ath11k_qmi_driver_event){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0 [ 235.577079] #1: ffffa33cc02f3e70 ((work_completion)(&ab->qmi.event_work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0 [ 235.577081] #2: ffff9655f75cad50 (&ab->core_lock){+.+.}-{3:3}, at: ath11k_core_qmi_firmware_ready.part.0+0x4e/0x160 [ath11k] [ 235.577087] [ 235.577087] stack backtrace: [ 235.577088] CPU: 3 PID: 98 Comm: kworker/u16:1 Not tainted 5.9.0-rc5-wt-ath+ #196 [ 235.577089] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 235.577095] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k] [ 235.577096] Call Trace: [ 235.577100] dump_stack+0x77/0xa0 [ 235.577102] mark_lock_irq.cold+0x15/0x3c [ 235.577104] mark_lock+0x1d7/0x540 [ 235.577105] mark_usage+0xc7/0x140 [ 235.577107] __lock_acquire+0x219/0x6e0 [ 235.577108] ? sched_clock_cpu+0xc/0xb0 [ 235.577110] lock_acquire+0xb6/0x270 [ 235.577116] ? ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577118] ? atomic_notifier_chain_register+0x2d/0x40 [ 235.577120] _raw_spin_lock+0x2c/0x70 [ 235.577125] ? ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577130] ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577136] __ath11k_mac_register+0x3fb/0x480 [ath11k] [ 235.577141] ath11k_mac_register+0x119/0x180 [ath11k] [ 235.577146] ath11k_core_pdev_create+0x17/0xe0 [ath11k] [ 235.577150] ath11k_core_qmi_firmware_ready.part.0+0x65/0x160 [ath11k] [ 235.577155] ath11k_qmi_driver_event_work+0x1c5/0x230 [ath11k] [ 235.577158] process_one_work+0x265/0x5d0 [ 235.577160] worker_thread+0x49/0x300 [ 235.577161] ? process_one_work+0x5d0/0x5d0 [ 235.577163] kthread+0x135/0x150 [ 235.577164] ? kthread_create_worker_on_cpu+0x60/0x60 [ 235.577166] ret_from_fork+0x22/0x30 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-7-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: fix warning caused by lockdep_assert_heldCarl Huang1-0/+4
[ Upstream commit 2f588660e34a982377109872757f1b99d7748d21 ] Fix warning caused by lockdep_assert_held when CONFIG_LOCKDEP is enabled. [ 271.940647] WARNING: CPU: 6 PID: 0 at drivers/net/wireless/ath/ath11k/hal.c:818 ath11k_hal_srng_access_begin+0x31/0x40 [ath11k] [ 271.940655] Modules linked in: qrtr_mhi qrtr ns ath11k_pci mhi ath11k qmi_helpers nvme nvme_core [ 271.940675] CPU: 6 PID: 0 Comm: swapper/6 Kdump: loaded Tainted: G W 5.9.0-rc5-kalle-bringup-wt-ath+ #4 [ 271.940682] Hardware name: Dell Inc. Inspiron 7590/08717F, BIOS 1.3.0 07/22/2019 [ 271.940698] RIP: 0010:ath11k_hal_srng_access_begin+0x31/0x40 [ath11k] [ 271.940708] Code: 48 89 f3 85 c0 75 11 48 8b 83 a8 00 00 00 8b 00 89 83 b0 00 00 00 5b c3 48 8d 7e 58 be ff ff ff ff e8 53 24 ec fa 85 c0 75 dd <0f> 0b eb d9 90 66 2e 0f 1f 84 00 00 00 00 00 55 53 48 89 f3 8b 35 [ 271.940718] RSP: 0018:ffffbdf0c0230df8 EFLAGS: 00010246 [ 271.940727] RAX: 0000000000000000 RBX: ffffa12b34e67680 RCX: ffffa12b57a0d800 [ 271.940735] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffa12b34e676d8 [ 271.940742] RBP: ffffa12b34e60000 R08: 0000000000000001 R09: 0000000000000001 [ 271.940753] R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000 [ 271.940763] R13: ffffa12b34e60000 R14: ffffa12b34e60000 R15: 0000000000000000 [ 271.940774] FS: 0000000000000000(0000) GS:ffffa12b5a400000(0000) knlGS:0000000000000000 [ 271.940788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 271.940798] CR2: 00007f8bef282008 CR3: 00000001f4224004 CR4: 00000000003706e0 [ 271.940805] Call Trace: [ 271.940813] <IRQ> [ 271.940835] ath11k_dp_tx_completion_handler+0x9e/0x950 [ath11k] [ 271.940847] ? lock_acquire+0xba/0x3b0 [ 271.940876] ath11k_dp_service_srng+0x5a/0x2e0 [ath11k] [ 271.940893] ath11k_pci_ext_grp_napi_poll+0x1e/0x80 [ath11k_pci] [ 271.940908] net_rx_action+0x283/0x4f0 [ 271.940931] __do_softirq+0xcb/0x499 [ 271.940950] asm_call_on_stack+0x12/0x20 [ 271.940963] </IRQ> [ 271.940979] do_softirq_own_stack+0x4d/0x60 [ 271.940991] irq_exit_rcu+0xb0/0xc0 [ 271.941001] common_interrupt+0xce/0x190 [ 271.941014] asm_common_interrupt+0x1e/0x40 [ 271.941026] RIP: 0010:cpuidle_enter_state+0x115/0x500 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601463073-12106-5-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in ath11k_dp_htt_get_ppdu_descWen Gong1-1/+1
[ Upstream commit 6a8be1baa9116a038cb4f6158cc10134387ca0d0 ] With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc is being called in non-atomic context. To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL kzalloc. [ 357.217088] BUG: sleeping function called from invalid context at mm/slab.h:498 [ 357.217091] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0 [ 357.217092] INFO: lockdep is turned off. [ 357.217095] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.9.0-rc5-wt-ath+ #196 [ 357.217096] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 357.217097] Call Trace: [ 357.217098] <IRQ> [ 357.217107] ? ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k] [ 357.217110] dump_stack+0x77/0xa0 [ 357.217113] ___might_sleep.cold+0xa6/0xb6 [ 357.217116] kmem_cache_alloc_trace+0x1f2/0x270 [ 357.217122] ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k] [ 357.217129] ath11k_htt_pull_ppdu_stats.isra.0+0x96/0x270 [ath11k] [ 357.217135] ath11k_dp_htt_htc_t2h_msg_handler+0xe7/0x1d0 [ath11k] [ 357.217137] ? trace_hardirqs_on+0x1c/0x100 [ 357.217143] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k] [ 357.217149] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k] [ 357.217151] ? handle_irq_event+0x70/0xa8 [ 357.217154] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci] [ 357.217157] tasklet_action_common.constprop.0+0xd4/0xf0 [ 357.217160] __do_softirq+0xc9/0x482 [ 357.217162] asm_call_on_stack+0x12/0x20 [ 357.217163] </IRQ> [ 357.217166] do_softirq_own_stack+0x49/0x60 [ 357.217167] irq_exit_rcu+0x9a/0xd0 [ 357.217169] common_interrupt+0xa1/0x190 [ 357.217171] asm_common_interrupt+0x1e/0x40 [ 357.217173] RIP: 0010:cpu_idle_poll.isra.0+0x2e/0x60 [ 357.217175] Code: 8b 35 26 27 74 69 e8 11 c8 3d ff e8 bc fa 42 ff e8 e7 9f 4a ff fb 65 48 8b 1c 25 80 90 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 0 [ 357.217177] RSP: 0018:ffffffff97403ee0 EFLAGS: 00000202 [ 357.217178] RAX: 0000000000000001 RBX: ffffffff9742b8c0 RCX: 0000000000b890ca [ 357.217180] RDX: 0000000000b890ca RSI: 0000000000000001 RDI: ffffffff968d0c49 [ 357.217181] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 357.217182] R10: ffffffff9742b8c0 R11: 0000000000000046 R12: 0000000000000000 [ 357.217183] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000066fdf520 [ 357.217186] ? cpu_idle_poll.isra.0+0x19/0x60 [ 357.217189] do_idle+0x5f/0xe0 [ 357.217191] cpu_startup_entry+0x14/0x20 [ 357.217193] start_kernel+0x443/0x464 [ 357.217196] secondary_startup_64+0xa4/0xb0 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-8-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05brcmfmac: Fix warning message after dongle setup failedWright Feng1-4/+6
[ Upstream commit 6aa5a83a7ed8036c1388a811eb8bdfa77b21f19c ] Brcmfmac showed warning message in fweh.c when checking the size of event queue which is not initialized. Therefore, we only cancel the worker and reset event handler only when it is initialized. [ 145.505899] brcmfmac 0000:02:00.0: brcmf_pcie_setup: Dongle setup [ 145.929970] ------------[ cut here ]------------ [ 145.929994] WARNING: CPU: 0 PID: 288 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:312 brcmf_fweh_detach+0xbc/0xd0 [brcmfmac] ... [ 145.930029] Call Trace: [ 145.930036] brcmf_detach+0x77/0x100 [brcmfmac] [ 145.930043] brcmf_pcie_remove+0x79/0x130 [brcmfmac] [ 145.930046] pci_device_remove+0x39/0xc0 [ 145.930048] device_release_driver_internal+0x141/0x200 [ 145.930049] device_release_driver+0x12/0x20 [ 145.930054] brcmf_pcie_setup+0x101/0x3c0 [brcmfmac] [ 145.930060] brcmf_fw_request_done+0x11d/0x1f0 [brcmfmac] [ 145.930062] ? lock_timer_base+0x7d/0xa0 [ 145.930063] ? internal_add_timer+0x1f/0xa0 [ 145.930064] ? add_timer+0x11a/0x1d0 [ 145.930066] ? __kmalloc_track_caller+0x18c/0x230 [ 145.930068] ? kstrdup_const+0x23/0x30 [ 145.930069] ? add_dr+0x46/0x80 [ 145.930070] ? devres_add+0x3f/0x50 [ 145.930072] ? usermodehelper_read_unlock+0x15/0x20 [ 145.930073] ? _request_firmware+0x288/0xa20 [ 145.930075] request_firmware_work_func+0x36/0x60 [ 145.930077] process_one_work+0x144/0x360 [ 145.930078] worker_thread+0x4d/0x3c0 [ 145.930079] kthread+0x112/0x150 [ 145.930080] ? rescuer_thread+0x340/0x340 [ 145.930081] ? kthread_park+0x60/0x60 [ 145.930083] ret_from_fork+0x25/0x30 Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200928054922.44580-3-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05octeontx2-af: fix LD CUSTOM LTYPE aliasingStanislaw Kardach1-2/+2
[ Upstream commit 450f0b978870c384dd81d1176088536555f3170e ] Since LD contains LTYPE definitions tweaked toward efficient NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions. Moving custom frame to value 6 and 7 removes the aliasing at the cost of custom frames being also considered when TCP/UDP RSS algo is configured. However since the goal of CUSTOM frames is to classify them to a separate set of RQs, this cost is acceptable. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05can: flexcan: disable clocks during stop modeJoakim Zhang1-10/+20
[ Upstream commit 02f71c6605e1f8259c07f16178330db766189a74 ] Disable clocks while CAN core is in stop mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20191210085721.9853-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05brcmfmac: increase F2 watermark for BCM4329Dmitry Osipenko1-0/+1
[ Upstream commit 317da69d10b0247c4042354eb90c75b81620ce9d ] This patch fixes SDHCI CRC errors during of RX throughput testing on BCM4329 chip if SDIO BUS is clocked above 25MHz. In particular the checksum problem is observed on NVIDIA Tegra20 SoCs. The good watermark value is borrowed from downstream BCMDHD driver and it's matching to the value that is already used for the BCM4339 chip, hence let's re-use it for BCM4329. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200830191439.10017-2-digetx@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: fix VHT NSS calculation when STBC is enabledSathishkumar Muruganandam1-1/+7
[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ] When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case. Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture. Tested-on: QCA9984 10.4-3.10-00047 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: start recovery process when payload length exceeds max htc length ↵Wen Gong1-0/+4
for sdio [ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ] When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. It happened payload length exceeds max htc length. [ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 .... [ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan. [ 269.229232] ieee80211 phy0: Hardware restart was requested [ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer. Start recovery when it happened "payload length exceeds max htc length" will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: fix retry packets update in station dumpVenkateswara Naralasetty2-5/+8
[ Upstream commit 67b927f9820847d30e97510b2f00cd142b9559b6 ] When tx status enabled, retry count is updated from tx completion status. which is not working as expected due to firmware limitation where firmware can not provide per MSDU rate statistics from tx completion status. Due to this tx retry count is always 0 in station dump. Fix this issue by updating the retry packet count from per peer statistics. This patch will not break on SDIO devices since, this retry count is already updating from peer statistics for SDIO devices. Tested-on: QCA9984 PCI 10.4-3.6-00104 Tested-on: QCA9882 PCI 10.2.4-1.0-00047 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591856446-26977-1-git-send-email-vnaralas@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()Amit Cohen1-0/+3
[ Upstream commit 0daf2bf5a2dcf33d446b76360908f109816e2e21 ] Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05RDMA/mlx5: Fix devlink deadlock on net namespace deletionParav Pandit1-5/+0
[ Upstream commit fbdd0049d98d44914fc57d4b91f867f4996c787b ] When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ionic: no rx flush in deinitSasha Levin3-15/+0
[ Upstream commit 43ecf7b46f2688fd37909801aee264f288b3917b ] Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05xen/netback: use lateeoi irq bindingJuergen Gross4-14/+86
commit 23025393dbeb3b8b3b60ebfa724cdae384992e27 upstream. In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving netfront use the lateeoi irq binding for netback and unmask the event channel only just before going to sleep waiting for new events. Make sure not to issue an EOI when none is pending by introducing an eoi_pending element to struct xenvif_queue. When no request has been consumed set the spurious flag when sending the EOI for an interrupt. This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01p54: avoid accessing the data mapped to streaming DMAJia-Ju Bai1-1/+3
commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream. In p54p_tx(), skb->data is mapped to streaming DMA on line 337: mapping = pci_map_single(..., skb->data, ...); Then skb->data is accessed on line 349: desc->device_addr = ((struct p54_hdr *)skb->data)->req_id; This access may cause data inconsistency between CPU cache and hardware. To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data. Cc: <stable@vger.kernel.org> Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ravb: Fix bit fields checking in ravb_hwtstamp_get()Andrew Gabbasov1-3/+7
[ Upstream commit 68b9f0865b1ef545da180c57d54b82c94cb464a4 ] In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01r8169: fix issue with forced threading in combination with shared interruptsHeiner Kallweit1-2/+2
[ Upstream commit 2734a24e6e5d18522fbf599135c59b82ec9b2c9e ] As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01net: ipa: command payloads already mappedAlex Elder1-6/+15
[ Upstream commit df833050cced27e1b343cc8bc41f90191b289334 ] IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01net: hns3: Clear the CMDQ registers before unmapping BAR regionZenghui Yu1-1/+1
[ Upstream commit e3364c5ff3ff975b943a7bf47e21a2a4bf20f3fe ] When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01mlxsw: Only advertise link modes supported by both driver and deviceAmit Cohen3-2/+38
[ Upstream commit 1601559be3e4213148b4cb4a1abe672b00bf4f67 ] During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891268d ("mlxsw: Remove 56G speed support") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01mlxsw: core: Fix memory leak on module removalIdo Schimmel1-0/+2
[ Upstream commit adc80b6cfedff6dad8b93d46a5ea2775fd5af9ec ] Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vadim Pasternak <vadimp@nvidia.com> Tested-by: Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ibmvnic: fix ibmvnic_set_macLijun Pan1-2/+6
[ Upstream commit 8fc3672a8ad3e782bac80e979bc2a2c10960cbe9 ] Jakub Kicinski brought up a concern in ibmvnic_set_mac(). ibmvnic_set_mac() does this: ether_addr_copy(adapter->mac_addr, addr->sa_data); if (adapter->state != VNIC_PROBED) rc = __ibmvnic_set_mac(netdev, addr->sa_data); So if state == VNIC_PROBED, the user can assign an invalid address to adapter->mac_addr, and ibmvnic_set_mac() will still return 0. The fix is to validate ethernet address at the beginning of ibmvnic_set_mac(), and move the ether_addr_copy to the case of "adapter->state != VNIC_PROBED". Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201027220456.71450-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ibmveth: Fix use of ibmveth in a bridge.Thomas Bogendoerfer1-6/+0
[ Upstream commit 2ac8af0967aaa2b67cb382727e784900d2f4d0da ] The check for src mac address in ibmveth_is_packet_unsupported is wrong. Commit 6f2275433a2f wanted to shut down messages for loopback packets, but now suppresses bridged frames, which are accepted by the hypervisor otherwise bridging won't work at all. Fixes: 6f2275433a2f ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20201026104221.26570-1-msuchanek@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01gtp: fix an use-before-init in gtp_newlink()Masahiro Fujiwara1-8/+8
[ Upstream commit 51467431200b91682b89d31317e35dcbca1469ce ] *_pdp_find() from gtp_encap_recv() would trigger a crash when a peer sends GTP packets while creating new GTP device. RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp] <SNIP> Call Trace: <IRQ> gtp_encap_recv+0xc2/0x2e0 [gtp] ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp] udp_queue_rcv_one_skb+0x1fe/0x530 udp_queue_rcv_skb+0x40/0x1b0 udp_unicast_rcv_skb.isra.0+0x78/0x90 __udp4_lib_rcv+0x5af/0xc70 udp_rcv+0x1a/0x20 ip_protocol_deliver_rcu+0xc5/0x1b0 ip_local_deliver_finish+0x48/0x50 ip_local_deliver+0xe5/0xf0 ? ip_protocol_deliver_rcu+0x1b0/0x1b0 gtp_encap_enable() should be called after gtp_hastable_new() otherwise *_pdp_find() will access the uninitialized hash table. Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com> Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01cxgb4: set up filter action after rewritesRaju Rangoju2-29/+31
[ Upstream commit 937d8420588421eaa5c7aa5c79b26b42abb288ef ] The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.Vasundhara Volam1-1/+2
[ Upstream commit 825741b071722f1c8ad692cead562c4b5f5eaa93 ] In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam2-1/+19
[ Upstream commit f75d9a0aa96721d20011cd5f8c7a24eb32728589 ] When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam1-11/+2
[ Upstream commit 631ce27a3006fc0b732bfd589c6df505f62eadd9 ] As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam1-4/+5
[ Upstream commit 21d6a11e2cadfb8446265a3efff0e2aad206e15e ] A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Check abort error state in bnxt_open_nic().Michael Chan1-1/+4
[ Upstream commit a1301f08c5acf992d9c1fafddc84c3a822844b04 ] bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29net: korina: cast KSEG0 address to pointer in kfreeValentin Vidic1-2/+2
[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ] Fixes gcc warning: passing argument 1 of 'kfree' makes pointer from integer without a cast Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()Zekun Shen1-0/+8
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ] The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by htt->rx_ring.netbufs_ring[idx] = skb; or by ath10k_htt_set_paddrs_ring(htt, paddr, idx); The idx can also be negative as it's signed, giving a large memory space to write to. It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object. Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance. [ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0 [ 15.595483] #PF: supervisor write access in kernel mode [ 15.596250] #PF: error_code(0x0002) - not-present page [ 15.597013] PGD 0 P4D 0 [ 15.597395] Oops: 0002 [#1] SMP KASAN PTI [ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69 [ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] [ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29brcm80211: fix possible memleak in brcmf_proto_msgbuf_attachWang Yufen1-0/+2
[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ] When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL, we should destroy the workqueue. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mwifiex: don't call del_timer_sync() on uninitialized timerTetsuo Handa1-1/+2
[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ] syzbot is reporting that del_timer_sync() is called from mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without checking timer_setup() from mwifiex_usb_tx_init() was called [1]. Ganapathi Bhat proposed a possibly cleaner fix, but it seems that that fix was forgotten [2]. "grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that currently there are 28 locations which call del_timer[_sync]() only if that timer's function field was initialized (because timer_setup() sets that timer's function field). Therefore, let's use same approach here. [1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959 [2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29rtl8xxxu: prevent potential memory leakChris Chiu1-1/+9
[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ] Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-21 04:28:16 +0300