summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-11-05bnxt_en: Log unknown link speed appropriately.Michael Chan1-1/+5
[ Upstream commit 8eddb3e7ce124dd6375d3664f1aae13873318b0f ] If the VF virtual link is set to always enabled, the speed may be unknown when the physical link is down. The driver currently logs the link speed as 4294967295 Mbps which is SPEED_UNKNOWN. Modify the link up log message as "speed unknown" which makes more sense. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1602493854-29283-7-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drivers/net/wan/hdlc_fr: Correctly handle special skb->protocol valuesXie He1-47/+51
[ Upstream commit 8306266c1d51aac9aa7aa907fe99032a58c6382c ] The fr_hard_header function is used to prepend the header to skbs before transmission. It is used in 3 situations: 1) When a control packet is generated internally in this driver; 2) When a user sends an skb on an Ethernet-emulating PVC device; 3) When a user sends an skb on a normal PVC device. These 3 situations need to be handled differently by fr_hard_header. Different headers should be prepended to the skb in different situations. Currently fr_hard_header distinguishes these 3 situations using skb->protocol. For situation 1 and 2, a special skb->protocol value will be assigned before calling fr_hard_header, so that it can recognize these 2 situations. All skb->protocol values other than these special ones are treated by fr_hard_header as situation 3. However, it is possible that in situation 3, the user sends an skb with one of the special skb->protocol values. In this case, fr_hard_header would incorrectly treat it as situation 1 or 2. This patch tries to solve this issue by using skb->dev instead of skb->protocol to distinguish between these 3 situations. For situation 1, skb->dev would be NULL; for situation 2, skb->dev->type would be ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI. This way fr_hard_header would be able to distinguish these 3 situations correctly regardless what skb->protocol value the user tries to use in situation 3. Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: change to disable softirqs for ath11k_regd_update to solve deadlockWen Gong1-3/+3
[ Upstream commit df648808c6b9989555e247530d8ca0ad0094b361 ] After base_lock which occupy by ath11k_regd_update, the softirq run for WMI_REG_CHAN_LIST_CC_EVENTID maybe arrived and it also need to accuire the spin lock, then deadlock happend, change to disable softirqis to solve it. [ 235.576990] ================================ [ 235.576991] WARNING: inconsistent lock state [ 235.576993] 5.9.0-rc5-wt-ath+ #196 Not tainted [ 235.576994] -------------------------------- [ 235.576995] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 235.576997] kworker/u16:1/98 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 235.576998] ffff9655f75cad98 (&ab->base_lock){+.?.}-{2:2}, at: ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577009] {IN-SOFTIRQ-W} state was registered at: [ 235.577013] __lock_acquire+0x219/0x6e0 [ 235.577015] lock_acquire+0xb6/0x270 [ 235.577018] _raw_spin_lock+0x2c/0x70 [ 235.577023] ath11k_reg_chan_list_event.isra.0+0x10d/0x1e0 [ath11k] [ 235.577028] ath11k_wmi_tlv_op_rx+0x3c3/0x560 [ath11k] [ 235.577033] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k] [ 235.577039] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k] [ 235.577041] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci] [ 235.577043] tasklet_action_common.constprop.0+0xd4/0xf0 [ 235.577045] __do_softirq+0xc9/0x482 [ 235.577046] asm_call_on_stack+0x12/0x20 [ 235.577048] do_softirq_own_stack+0x49/0x60 [ 235.577049] irq_exit_rcu+0x9a/0xd0 [ 235.577050] common_interrupt+0xa1/0x190 [ 235.577052] asm_common_interrupt+0x1e/0x40 [ 235.577053] cpu_idle_poll.isra.0+0x2e/0x60 [ 235.577055] do_idle+0x5f/0xe0 [ 235.577056] cpu_startup_entry+0x14/0x20 [ 235.577058] start_kernel+0x443/0x464 [ 235.577060] secondary_startup_64+0xa4/0xb0 [ 235.577061] irq event stamp: 432035 [ 235.577063] hardirqs last enabled at (432035): [<ffffffff968d12b4>] _raw_spin_unlock_irqrestore+0x34/0x40 [ 235.577064] hardirqs last disabled at (432034): [<ffffffff968d10d3>] _raw_spin_lock_irqsave+0x63/0x80 [ 235.577066] softirqs last enabled at (431998): [<ffffffff967115c1>] inet6_fill_ifla6_attrs+0x3f1/0x430 [ 235.577067] softirqs last disabled at (431996): [<ffffffff9671159f>] inet6_fill_ifla6_attrs+0x3cf/0x430 [ 235.577068] [ 235.577068] other info that might help us debug this: [ 235.577069] Possible unsafe locking scenario: [ 235.577069] [ 235.577070] CPU0 [ 235.577070] ---- [ 235.577071] lock(&ab->base_lock); [ 235.577072] <Interrupt> [ 235.577073] lock(&ab->base_lock); [ 235.577074] [ 235.577074] *** DEADLOCK *** [ 235.577074] [ 235.577075] 3 locks held by kworker/u16:1/98: [ 235.577076] #0: ffff9655f75b1d48 ((wq_completion)ath11k_qmi_driver_event){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0 [ 235.577079] #1: ffffa33cc02f3e70 ((work_completion)(&ab->qmi.event_work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0 [ 235.577081] #2: ffff9655f75cad50 (&ab->core_lock){+.+.}-{3:3}, at: ath11k_core_qmi_firmware_ready.part.0+0x4e/0x160 [ath11k] [ 235.577087] [ 235.577087] stack backtrace: [ 235.577088] CPU: 3 PID: 98 Comm: kworker/u16:1 Not tainted 5.9.0-rc5-wt-ath+ #196 [ 235.577089] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 235.577095] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k] [ 235.577096] Call Trace: [ 235.577100] dump_stack+0x77/0xa0 [ 235.577102] mark_lock_irq.cold+0x15/0x3c [ 235.577104] mark_lock+0x1d7/0x540 [ 235.577105] mark_usage+0xc7/0x140 [ 235.577107] __lock_acquire+0x219/0x6e0 [ 235.577108] ? sched_clock_cpu+0xc/0xb0 [ 235.577110] lock_acquire+0xb6/0x270 [ 235.577116] ? ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577118] ? atomic_notifier_chain_register+0x2d/0x40 [ 235.577120] _raw_spin_lock+0x2c/0x70 [ 235.577125] ? ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577130] ath11k_regd_update+0x28/0x1d0 [ath11k] [ 235.577136] __ath11k_mac_register+0x3fb/0x480 [ath11k] [ 235.577141] ath11k_mac_register+0x119/0x180 [ath11k] [ 235.577146] ath11k_core_pdev_create+0x17/0xe0 [ath11k] [ 235.577150] ath11k_core_qmi_firmware_ready.part.0+0x65/0x160 [ath11k] [ 235.577155] ath11k_qmi_driver_event_work+0x1c5/0x230 [ath11k] [ 235.577158] process_one_work+0x265/0x5d0 [ 235.577160] worker_thread+0x49/0x300 [ 235.577161] ? process_one_work+0x5d0/0x5d0 [ 235.577163] kthread+0x135/0x150 [ 235.577164] ? kthread_create_worker_on_cpu+0x60/0x60 [ 235.577166] ret_from_fork+0x22/0x30 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-7-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: fix warning caused by lockdep_assert_heldCarl Huang1-0/+4
[ Upstream commit 2f588660e34a982377109872757f1b99d7748d21 ] Fix warning caused by lockdep_assert_held when CONFIG_LOCKDEP is enabled. [ 271.940647] WARNING: CPU: 6 PID: 0 at drivers/net/wireless/ath/ath11k/hal.c:818 ath11k_hal_srng_access_begin+0x31/0x40 [ath11k] [ 271.940655] Modules linked in: qrtr_mhi qrtr ns ath11k_pci mhi ath11k qmi_helpers nvme nvme_core [ 271.940675] CPU: 6 PID: 0 Comm: swapper/6 Kdump: loaded Tainted: G W 5.9.0-rc5-kalle-bringup-wt-ath+ #4 [ 271.940682] Hardware name: Dell Inc. Inspiron 7590/08717F, BIOS 1.3.0 07/22/2019 [ 271.940698] RIP: 0010:ath11k_hal_srng_access_begin+0x31/0x40 [ath11k] [ 271.940708] Code: 48 89 f3 85 c0 75 11 48 8b 83 a8 00 00 00 8b 00 89 83 b0 00 00 00 5b c3 48 8d 7e 58 be ff ff ff ff e8 53 24 ec fa 85 c0 75 dd <0f> 0b eb d9 90 66 2e 0f 1f 84 00 00 00 00 00 55 53 48 89 f3 8b 35 [ 271.940718] RSP: 0018:ffffbdf0c0230df8 EFLAGS: 00010246 [ 271.940727] RAX: 0000000000000000 RBX: ffffa12b34e67680 RCX: ffffa12b57a0d800 [ 271.940735] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffa12b34e676d8 [ 271.940742] RBP: ffffa12b34e60000 R08: 0000000000000001 R09: 0000000000000001 [ 271.940753] R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000 [ 271.940763] R13: ffffa12b34e60000 R14: ffffa12b34e60000 R15: 0000000000000000 [ 271.940774] FS: 0000000000000000(0000) GS:ffffa12b5a400000(0000) knlGS:0000000000000000 [ 271.940788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 271.940798] CR2: 00007f8bef282008 CR3: 00000001f4224004 CR4: 00000000003706e0 [ 271.940805] Call Trace: [ 271.940813] <IRQ> [ 271.940835] ath11k_dp_tx_completion_handler+0x9e/0x950 [ath11k] [ 271.940847] ? lock_acquire+0xba/0x3b0 [ 271.940876] ath11k_dp_service_srng+0x5a/0x2e0 [ath11k] [ 271.940893] ath11k_pci_ext_grp_napi_poll+0x1e/0x80 [ath11k_pci] [ 271.940908] net_rx_action+0x283/0x4f0 [ 271.940931] __do_softirq+0xcb/0x499 [ 271.940950] asm_call_on_stack+0x12/0x20 [ 271.940963] </IRQ> [ 271.940979] do_softirq_own_stack+0x4d/0x60 [ 271.940991] irq_exit_rcu+0xb0/0xc0 [ 271.941001] common_interrupt+0xce/0x190 [ 271.941014] asm_common_interrupt+0x1e/0x40 [ 271.941026] RIP: 0010:cpuidle_enter_state+0x115/0x500 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601463073-12106-5-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in ath11k_dp_htt_get_ppdu_descWen Gong1-1/+1
[ Upstream commit 6a8be1baa9116a038cb4f6158cc10134387ca0d0 ] With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc is being called in non-atomic context. To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL kzalloc. [ 357.217088] BUG: sleeping function called from invalid context at mm/slab.h:498 [ 357.217091] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0 [ 357.217092] INFO: lockdep is turned off. [ 357.217095] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.9.0-rc5-wt-ath+ #196 [ 357.217096] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018 [ 357.217097] Call Trace: [ 357.217098] <IRQ> [ 357.217107] ? ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k] [ 357.217110] dump_stack+0x77/0xa0 [ 357.217113] ___might_sleep.cold+0xa6/0xb6 [ 357.217116] kmem_cache_alloc_trace+0x1f2/0x270 [ 357.217122] ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k] [ 357.217129] ath11k_htt_pull_ppdu_stats.isra.0+0x96/0x270 [ath11k] [ 357.217135] ath11k_dp_htt_htc_t2h_msg_handler+0xe7/0x1d0 [ath11k] [ 357.217137] ? trace_hardirqs_on+0x1c/0x100 [ 357.217143] ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k] [ 357.217149] ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k] [ 357.217151] ? handle_irq_event+0x70/0xa8 [ 357.217154] ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci] [ 357.217157] tasklet_action_common.constprop.0+0xd4/0xf0 [ 357.217160] __do_softirq+0xc9/0x482 [ 357.217162] asm_call_on_stack+0x12/0x20 [ 357.217163] </IRQ> [ 357.217166] do_softirq_own_stack+0x49/0x60 [ 357.217167] irq_exit_rcu+0x9a/0xd0 [ 357.217169] common_interrupt+0xa1/0x190 [ 357.217171] asm_common_interrupt+0x1e/0x40 [ 357.217173] RIP: 0010:cpu_idle_poll.isra.0+0x2e/0x60 [ 357.217175] Code: 8b 35 26 27 74 69 e8 11 c8 3d ff e8 bc fa 42 ff e8 e7 9f 4a ff fb 65 48 8b 1c 25 80 90 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 0 [ 357.217177] RSP: 0018:ffffffff97403ee0 EFLAGS: 00000202 [ 357.217178] RAX: 0000000000000001 RBX: ffffffff9742b8c0 RCX: 0000000000b890ca [ 357.217180] RDX: 0000000000b890ca RSI: 0000000000000001 RDI: ffffffff968d0c49 [ 357.217181] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 357.217182] R10: ffffffff9742b8c0 R11: 0000000000000046 R12: 0000000000000000 [ 357.217183] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000066fdf520 [ 357.217186] ? cpu_idle_poll.isra.0+0x19/0x60 [ 357.217189] do_idle+0x5f/0xe0 [ 357.217191] cpu_startup_entry+0x14/0x20 [ 357.217193] start_kernel+0x443/0x464 [ 357.217196] secondary_startup_64+0xa4/0xb0 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1601399736-3210-8-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05brcmfmac: Fix warning message after dongle setup failedWright Feng1-4/+6
[ Upstream commit 6aa5a83a7ed8036c1388a811eb8bdfa77b21f19c ] Brcmfmac showed warning message in fweh.c when checking the size of event queue which is not initialized. Therefore, we only cancel the worker and reset event handler only when it is initialized. [ 145.505899] brcmfmac 0000:02:00.0: brcmf_pcie_setup: Dongle setup [ 145.929970] ------------[ cut here ]------------ [ 145.929994] WARNING: CPU: 0 PID: 288 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:312 brcmf_fweh_detach+0xbc/0xd0 [brcmfmac] ... [ 145.930029] Call Trace: [ 145.930036] brcmf_detach+0x77/0x100 [brcmfmac] [ 145.930043] brcmf_pcie_remove+0x79/0x130 [brcmfmac] [ 145.930046] pci_device_remove+0x39/0xc0 [ 145.930048] device_release_driver_internal+0x141/0x200 [ 145.930049] device_release_driver+0x12/0x20 [ 145.930054] brcmf_pcie_setup+0x101/0x3c0 [brcmfmac] [ 145.930060] brcmf_fw_request_done+0x11d/0x1f0 [brcmfmac] [ 145.930062] ? lock_timer_base+0x7d/0xa0 [ 145.930063] ? internal_add_timer+0x1f/0xa0 [ 145.930064] ? add_timer+0x11a/0x1d0 [ 145.930066] ? __kmalloc_track_caller+0x18c/0x230 [ 145.930068] ? kstrdup_const+0x23/0x30 [ 145.930069] ? add_dr+0x46/0x80 [ 145.930070] ? devres_add+0x3f/0x50 [ 145.930072] ? usermodehelper_read_unlock+0x15/0x20 [ 145.930073] ? _request_firmware+0x288/0xa20 [ 145.930075] request_firmware_work_func+0x36/0x60 [ 145.930077] process_one_work+0x144/0x360 [ 145.930078] worker_thread+0x4d/0x3c0 [ 145.930079] kthread+0x112/0x150 [ 145.930080] ? rescuer_thread+0x340/0x340 [ 145.930081] ? kthread_park+0x60/0x60 [ 145.930083] ret_from_fork+0x25/0x30 Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200928054922.44580-3-wright.feng@cypress.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05octeontx2-af: fix LD CUSTOM LTYPE aliasingStanislaw Kardach1-2/+2
[ Upstream commit 450f0b978870c384dd81d1176088536555f3170e ] Since LD contains LTYPE definitions tweaked toward efficient NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions. Moving custom frame to value 6 and 7 removes the aliasing at the cost of custom frames being also considered when TCP/UDP RSS algo is configured. However since the goal of CUSTOM frames is to classify them to a separate set of RQs, this cost is acceptable. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05can: flexcan: disable clocks during stop modeJoakim Zhang1-10/+20
[ Upstream commit 02f71c6605e1f8259c07f16178330db766189a74 ] Disable clocks while CAN core is in stop mode. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20191210085721.9853-2-qiangqing.zhang@nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05brcmfmac: increase F2 watermark for BCM4329Dmitry Osipenko1-0/+1
[ Upstream commit 317da69d10b0247c4042354eb90c75b81620ce9d ] This patch fixes SDHCI CRC errors during of RX throughput testing on BCM4329 chip if SDIO BUS is clocked above 25MHz. In particular the checksum problem is observed on NVIDIA Tegra20 SoCs. The good watermark value is borrowed from downstream BCMDHD driver and it's matching to the value that is already used for the BCM4339 chip, hence let's re-use it for BCM4329. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200830191439.10017-2-digetx@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: fix VHT NSS calculation when STBC is enabledSathishkumar Muruganandam1-1/+7
[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ] When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case. Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture. Tested-on: QCA9984 10.4-3.10-00047 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: start recovery process when payload length exceeds max htc length ↵Wen Gong1-0/+4
for sdio [ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ] When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. It happened payload length exceeds max htc length. [ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 .... [ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan. [ 269.229232] ieee80211 phy0: Hardware restart was requested [ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer. Start recovery when it happened "payload length exceeds max htc length" will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ath10k: fix retry packets update in station dumpVenkateswara Naralasetty2-5/+8
[ Upstream commit 67b927f9820847d30e97510b2f00cd142b9559b6 ] When tx status enabled, retry count is updated from tx completion status. which is not working as expected due to firmware limitation where firmware can not provide per MSDU rate statistics from tx completion status. Due to this tx retry count is always 0 in station dump. Fix this issue by updating the retry packet count from per peer statistics. This patch will not break on SDIO devices since, this retry count is already updating from peer statistics for SDIO devices. Tested-on: QCA9984 PCI 10.4-3.6-00104 Tested-on: QCA9882 PCI 10.2.4-1.0-00047 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1591856446-26977-1-git-send-email-vnaralas@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()Amit Cohen1-0/+3
[ Upstream commit 0daf2bf5a2dcf33d446b76360908f109816e2e21 ] Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05RDMA/mlx5: Fix devlink deadlock on net namespace deletionParav Pandit1-5/+0
[ Upstream commit fbdd0049d98d44914fc57d4b91f867f4996c787b ] When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05ionic: no rx flush in deinitSasha Levin3-15/+0
[ Upstream commit 43ecf7b46f2688fd37909801aee264f288b3917b ] Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05xen/netback: use lateeoi irq bindingJuergen Gross4-14/+86
commit 23025393dbeb3b8b3b60ebfa724cdae384992e27 upstream. In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving netfront use the lateeoi irq binding for netback and unmask the event channel only just before going to sleep waiting for new events. Make sure not to issue an EOI when none is pending by introducing an eoi_pending element to struct xenvif_queue. When no request has been consumed set the spurious flag when sending the EOI for an interrupt. This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01p54: avoid accessing the data mapped to streaming DMAJia-Ju Bai1-1/+3
commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream. In p54p_tx(), skb->data is mapped to streaming DMA on line 337: mapping = pci_map_single(..., skb->data, ...); Then skb->data is accessed on line 349: desc->device_addr = ((struct p54_hdr *)skb->data)->req_id; This access may cause data inconsistency between CPU cache and hardware. To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data. Cc: <stable@vger.kernel.org> Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ravb: Fix bit fields checking in ravb_hwtstamp_get()Andrew Gabbasov1-3/+7
[ Upstream commit 68b9f0865b1ef545da180c57d54b82c94cb464a4 ] In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01r8169: fix issue with forced threading in combination with shared interruptsHeiner Kallweit1-2/+2
[ Upstream commit 2734a24e6e5d18522fbf599135c59b82ec9b2c9e ] As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01net: ipa: command payloads already mappedAlex Elder1-6/+15
[ Upstream commit df833050cced27e1b343cc8bc41f90191b289334 ] IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01net: hns3: Clear the CMDQ registers before unmapping BAR regionZenghui Yu1-1/+1
[ Upstream commit e3364c5ff3ff975b943a7bf47e21a2a4bf20f3fe ] When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01mlxsw: Only advertise link modes supported by both driver and deviceAmit Cohen3-2/+38
[ Upstream commit 1601559be3e4213148b4cb4a1abe672b00bf4f67 ] During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891268d ("mlxsw: Remove 56G speed support") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01mlxsw: core: Fix memory leak on module removalIdo Schimmel1-0/+2
[ Upstream commit adc80b6cfedff6dad8b93d46a5ea2775fd5af9ec ] Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vadim Pasternak <vadimp@nvidia.com> Tested-by: Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ibmvnic: fix ibmvnic_set_macLijun Pan1-2/+6
[ Upstream commit 8fc3672a8ad3e782bac80e979bc2a2c10960cbe9 ] Jakub Kicinski brought up a concern in ibmvnic_set_mac(). ibmvnic_set_mac() does this: ether_addr_copy(adapter->mac_addr, addr->sa_data); if (adapter->state != VNIC_PROBED) rc = __ibmvnic_set_mac(netdev, addr->sa_data); So if state == VNIC_PROBED, the user can assign an invalid address to adapter->mac_addr, and ibmvnic_set_mac() will still return 0. The fix is to validate ethernet address at the beginning of ibmvnic_set_mac(), and move the ether_addr_copy to the case of "adapter->state != VNIC_PROBED". Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201027220456.71450-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01ibmveth: Fix use of ibmveth in a bridge.Thomas Bogendoerfer1-6/+0
[ Upstream commit 2ac8af0967aaa2b67cb382727e784900d2f4d0da ] The check for src mac address in ibmveth_is_packet_unsupported is wrong. Commit 6f2275433a2f wanted to shut down messages for loopback packets, but now suppresses bridged frames, which are accepted by the hypervisor otherwise bridging won't work at all. Fixes: 6f2275433a2f ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20201026104221.26570-1-msuchanek@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01gtp: fix an use-before-init in gtp_newlink()Masahiro Fujiwara1-8/+8
[ Upstream commit 51467431200b91682b89d31317e35dcbca1469ce ] *_pdp_find() from gtp_encap_recv() would trigger a crash when a peer sends GTP packets while creating new GTP device. RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp] <SNIP> Call Trace: <IRQ> gtp_encap_recv+0xc2/0x2e0 [gtp] ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp] udp_queue_rcv_one_skb+0x1fe/0x530 udp_queue_rcv_skb+0x40/0x1b0 udp_unicast_rcv_skb.isra.0+0x78/0x90 __udp4_lib_rcv+0x5af/0xc70 udp_rcv+0x1a/0x20 ip_protocol_deliver_rcu+0xc5/0x1b0 ip_local_deliver_finish+0x48/0x50 ip_local_deliver+0xe5/0xf0 ? ip_protocol_deliver_rcu+0x1b0/0x1b0 gtp_encap_enable() should be called after gtp_hastable_new() otherwise *_pdp_find() will access the uninitialized hash table. Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com> Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01cxgb4: set up filter action after rewritesRaju Rangoju2-29/+31
[ Upstream commit 937d8420588421eaa5c7aa5c79b26b42abb288ef ] The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.Vasundhara Volam1-1/+2
[ Upstream commit 825741b071722f1c8ad692cead562c4b5f5eaa93 ] In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam2-1/+19
[ Upstream commit f75d9a0aa96721d20011cd5f8c7a24eb32728589 ] When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam1-11/+2
[ Upstream commit 631ce27a3006fc0b732bfd589c6df505f62eadd9 ] As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam1-4/+5
[ Upstream commit 21d6a11e2cadfb8446265a3efff0e2aad206e15e ] A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-01bnxt_en: Check abort error state in bnxt_open_nic().Michael Chan1-1/+4
[ Upstream commit a1301f08c5acf992d9c1fafddc84c3a822844b04 ] bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29net: korina: cast KSEG0 address to pointer in kfreeValentin Vidic1-2/+2
[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ] Fixes gcc warning: passing argument 1 of 'kfree' makes pointer from integer without a cast Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()Zekun Shen1-0/+8
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ] The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by htt->rx_ring.netbufs_ring[idx] = skb; or by ath10k_htt_set_paddrs_ring(htt, paddr, idx); The idx can also be negative as it's signed, giving a large memory space to write to. It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object. Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance. [ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0 [ 15.595483] #PF: supervisor write access in kernel mode [ 15.596250] #PF: error_code(0x0002) - not-present page [ 15.597013] PGD 0 P4D 0 [ 15.597395] Oops: 0002 [#1] SMP KASAN PTI [ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69 [ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] [ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29brcm80211: fix possible memleak in brcmf_proto_msgbuf_attachWang Yufen1-0/+2
[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ] When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL, we should destroy the workqueue. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mwifiex: don't call del_timer_sync() on uninitialized timerTetsuo Handa1-1/+2
[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ] syzbot is reporting that del_timer_sync() is called from mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without checking timer_setup() from mwifiex_usb_tx_init() was called [1]. Ganapathi Bhat proposed a possibly cleaner fix, but it seems that that fix was forgotten [2]. "grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that currently there are 28 locations which call del_timer[_sync]() only if that timer's function field was initialized (because timer_setup() sets that timer's function field). Therefore, let's use same approach here. [1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959 [2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29rtl8xxxu: prevent potential memory leakChris Chiu1-1/+9
[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ] Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29brcmsmac: fix memory leak in wlc_phy_attach_lcnphyKeita Suzuki1-1/+3
[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ] When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function. Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29ath9k: hif_usb: fix race condition between usb_get_urb() and ↵Brooke Basile1-0/+19
usb_kill_anchored_urbs() [ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ] Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs(). Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf Signed-off-by: Brooke Basile <brookebasile@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29can: flexcan: flexcan_chip_stop(): add error handling and propagate error valueJoakim Zhang1-6/+28
[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ] This patch implements error handling and propagates the error value of flexcan_chip_stop(). This function will be called from flexcan_suspend() in an upcoming patch in some SoCs which support LPSR mode. Add a new function flexcan_chip_stop_disable_on_error() that tries to disable the chip even in case of errors. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()Felix Fietkau1-6/+3
[ Upstream commit 38b04398c532e9bb9aa90fc07846ad0b0845fe94 ] Fixes a race condition where multiple tx cleanup or sta poll tasks could run in parallel. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29rtw88: increse the size of rx buffer sizeTzu-En Huang1-2/+2
[ Upstream commit ee755732b7a16af018daa77d9562d2493fb7092f ] The vht capability of MAX_MPDU_LENGTH is 11454 in rtw88; however, the rx buffer size for each packet is 8192. When receiving packets that are larger than rx buffer size, it will leads to rx buffer ring overflow. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200925061219.23754-2-tehuang@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29rtw88: pci: Power cycle device during shutdownKai-Heng Feng1-0/+2
[ Upstream commit 44492e70adc8086c42d3745d21d591657a427f04 ] There are reports that 8822CE fails to work rtw88 with "failed to read DBI register" error. Also I have a system with 8723DE which freezes the whole system when the rtw88 is probing the device. According to [1], platform firmware may not properly power manage the device during shutdown. I did some expirements and putting the device to D3 can workaround the issue. So let's power cycle the device by putting the device to D3 at shutdown to prevent the issue from happening. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411#c9 BugLink: https://bugs.launchpad.net/bugs/1872984 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200928165508.20775-1-kai.heng.feng@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29net: dsa: seville: the packet buffer is 2 megabits, not megabytesMaxim Kochetkov1-1/+1
[ Upstream commit a15a6afb3bf9388eb83a4b876d3453f305fba909 ] The VSC9953 Seville switch has 2 megabits of buffer split into 4360 words of 60 bytes each. 2048 * 1024 is 2 megabytes instead of 2 megabits. 2 megabits is (2048 / 8) * 1024 = 256 * 1024. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: a63ed92d217f ("net: dsa: seville: fix buffer size of the queue system") Link: https://lore.kernel.org/r/20201019050625.21533-1-fido_max@inbox.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29net: korina: fix kfree of rx/tx descriptor arrayValentin Vidic1-1/+2
[ Upstream commit 3af5f0f5c74ecbaf757ef06c3f80d56751277637 ] kmalloc returns KSEG0 addresses so convert back from KSEG1 in kfree. Also make sure array is freed when the driver is unloaded from the kernel. Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC") Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mwifiex: fix double freeTom Rix1-0/+2
[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ] clang static analysis reports this problem: sdio.c:2403:3: warning: Attempt to free released memory kfree(card->mpa_rx.buf); ^~~~~~~~~~~~~~~~~~~~~~~ When mwifiex_init_sdio() fails in its first call to mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it again. If the second alloc of mpa_tx.buf fails, the error handler will try to free the old, previously freed mpa_rx.buf. Reviewing the code, it looks like a second double free would happen with mwifiex_cleanup_sdio(). So set both pointers to NULL when they are freed. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29iwlwifi: dbg: run init_cfg function once per driver loadMordechay Goodstein1-0/+3
[ Upstream commit 42f8a2735cc218b6b372134684d4cd3c1423f123 ] Every time we call init_cfg driver appends the enabled triggers to the active triggers while this should be done only once per driver load. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: 14124b25780d ("iwlwifi: dbg_ini: implement monitor allocation flow") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.79bd622e604a.Ie0f79d2ea90ca5cdf363f56194ead81b0a2c6202@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29iwlwifi: dbg: remove no filter conditionMordechay Goodstein1-3/+2
[ Upstream commit bfdb157127dab2a85d4096a68a00ad568c9eb590 ] Currently if group-id and command-id values are zero we trigger and collect every RX frame, this is not the right behavior and zero value should be handled like any other filter. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: 3ed34fbf9d3b ("iwlwifi: dbg_ini: support FW response/notification region type") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930161256.6a0aae2c0507.I7bd72968279d586af420472707d53106b35efc08@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29iwlwifi: mvm: split a print to avoid a WARNING in ROCEmmanuel Grumbach1-3/+6
[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ] A print in the remain on channel code was too long and caused a WARNING, split it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29net: enic: Cure the enic api locking trainwreckThomas Gleixner3-6/+28
[ Upstream commit a53b59ece86c86d16d12ccdaa1ad0c78250a9d96 ] enic_dev_wait() has a BUG_ON(in_interrupt()). Chasing the callers of enic_dev_wait() revealed the gems of enic_reset() and enic_tx_hang_reset() which are both invoked through work queues in order to be able to call rtnl_lock(). So far so good. After locking rtnl both functions acquire enic::enic_api_lock which serializes against the (ab)use from infiniband. This is where the trainwreck starts. enic::enic_api_lock is a spin_lock() which implicitly disables preemption, but both functions invoke a ton of functions under that lock which can sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it can't detect the preempt disabled condition. This clearly has never been tested with any of the mandatory debug options for 7+ years, which would have caught that for sure. Cure it by adding a enic_api_busy member to struct enic, which is modified and evaluated with enic::enic_api_lock held. If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true, it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to become false. It would be smarter to wait for a completion of that busy period, but enic_api_devcmd_proxy_by_index() is called with other spin locks held which obviously can't sleep. Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and with proper debugging enabled the problem would have been caught from the debug checks in schedule_timeout(). Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 19:35:40 +0300