summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21net/mlx5e: Use preactivate hook to set the indirection tableMaxim Mikityanskiy3-10/+17
[ Upstream commit fe867cac9e1967c553e4ac2aece5fc8675258010 ] mlx5e_ethtool_set_channels updates the indirection table before switching to the new channels. If the switch fails, the indirection table is new, but the channels are old, which is wrong. Fix it by using the preactivate hook of mlx5e_safe_switch_channels to update the indirection table at the stage when nothing can fail anymore. As the code that updates the indirection table is now encapsulated into a new function, use that function in the attach flow when the driver has to reduce the number of channels, and prepare the code for the next commit. Fixes: 85082dba0a ("net/mlx5e: Correctly handle RSS indirection table when changing number of channels") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21net/mlx5e: Rename hw_modify to preactivateMaxim Mikityanskiy2-9/+11
[ Upstream commit dca147b3dce5abb5284ff747211960fd2db5ec2e ] mlx5e_safe_switch_channels accepts a callback to be called before activating new channels. It is intended to configure some hardware parameters in cases where channels are recreated because some configuration has changed. Recently, this callback has started being used to update the driver's internal MLX5E_STATE_XDP_OPEN flag, and the following patches also intend to use this callback for software preparations. This patch renames the hw_modify callback to preactivate, so that the name fits better. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21net/mlx5e: Encapsulate updating netdev queues into a functionMaxim Mikityanskiy1-7/+12
[ Upstream commit c2c95271f9f39ea9b34db2301b3b6c5105cdb447 ] As a preparation for one of the following commits, create a function to encapsulate the code that notifies the kernel about the new amount of RX and TX queues. The code will be called multiple times in the next commit. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen1-6/+6
commit 7ea862048317aa76d0f22334202779a25530980c upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: stmmac: xgmac: Fix VLAN register handlingJose Abreu1-0/+11
commit 21f64e72e7073199a6f8d7d8efe52cd814d7d665 upstream. Commit 907a076881f1, forgot that we need to clear old values of XGMAC_VLAN_TAG register when we switch from VLAN perfect matching to HASH matching. Fix it. Fixes: 907a076881f1 ("net: stmmac: xgmac: fix incorrect XGMAC_VLAN_TAG register writting") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: phy: marvell: Fix pause frame negotiationClemens Gruber1-22/+24
[ Upstream commit 3b72f84f8fb65e83e85e9be58eabcf95a40b8f46 ] The negotiation of flow control / pause frame modes was broken since commit fcf1f59afc67 ("net: phy: marvell: rearrange to use genphy_read_lpa()") moved the setting of phydev->duplex below the phy_resolve_aneg_pause call. Due to a check of DUPLEX_FULL in that function, phydev->pause was no longer set. Fix it by moving the parsing of the status variable before the blocks dealing with the pause frames. As the Marvell 88E1510 datasheet does not specify the timing between the link status and the "Speed and Duplex Resolved" bit, we have to force the link down as long as the resolved bit is not set, to avoid reporting link up before we even have valid Speed/Duplex. Tested with a Marvell 88E1510 (RGMII to Copper/1000Base-T) Fixes: fcf1f59afc67 ("net: phy: marvell: rearrange to use genphy_read_lpa()") Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizesFlorian Fainelli1-0/+2
[ Upstream commit 806fd188ce2a4f8b587e83e73c478e6484fbfa55 ] After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa: configure the MTU for switch ports") my Lamobo R1 platform which uses an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail by rejecting a MTU of 1536. The reason for that is that the DMA capabilities are not readable on this version of the IP, and there is also no 'tx-fifo-depth' property being provided in Device Tree. The property is documented as optional, and is not provided. Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so provide these values through platform data as an immediate fix until various Device Tree sources get updated accordingly. Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridgeVladimir Oltean3-47/+44
[ Upstream commit 87b0f983f66f23762921129fd35966eddc3f2dae ] To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net/mlx5e: Fix pfnum in devlink port attributeParav Pandit1-4/+5
[ Upstream commit 7482d9cb5b974b7ad1a58fa8714f7a8c05b5d278 ] Cited patch missed to extract PCI pf number accurately for PF and VF port flavour. It considered PCI device + function number. Due to this, device having non zero device number shown large pfnum. Hence, use only PCI function number; to avoid similar errors, derive pfnum one time for all port flavours. Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs") Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net/mlx5e: Fix nest_level for vlan pop actionDmytro Linkin1-2/+3
[ Upstream commit 70f478ca085deec4d6c1f187f773f5827ddce7e8 ] Current value of nest_level, assigned from net_device lower_level value, does not reflect the actual number of vlan headers, needed to pop. For ex., if we have untagged ingress traffic sended over vlan devices, instead of one pop action, driver will perform two pop actions. To fix that, calculate nest_level as difference between vlan device and parent device lower_levels. Fixes: f3b0a18bb6cb ("net: remove unnecessary variables and callback") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net/mlx5e: Add missing release firmware callEran Ben Elisha1-1/+4
[ Upstream commit d19987ccf57501894fdd8fadc2e55e4a3dd57239 ] Once driver finishes flashing the firmware image, it should release it. Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net/mlx5: Fix frequent ioread PCI access during recoveryMoshe Shemesh1-1/+1
[ Upstream commit 8c702a53bb0a79bfa203ba21ef1caba43673c5b7 ] High frequency of PCI ioread calls during recovery flow may cause the following trace on powerpc: [ 248.670288] EEH: 2100000 reads ignored for recovering device at location=Slot1 driver=mlx5_core pci addr=0000:01:00.1 [ 248.670331] EEH: Might be infinite loop in mlx5_core driver [ 248.670361] CPU: 2 PID: 35247 Comm: kworker/u192:11 Kdump: loaded Tainted: G OE ------------ 4.14.0-115.14.1.el7a.ppc64le #1 [ 248.670425] Workqueue: mlx5_health0000:01:00.1 health_recover_work [mlx5_core] [ 248.670471] Call Trace: [ 248.670492] [c00020391c11b960] [c000000000c217ac] dump_stack+0xb0/0xf4 (unreliable) [ 248.670548] [c00020391c11b9a0] [c000000000045818] eeh_check_failure+0x5c8/0x630 [ 248.670631] [c00020391c11ba50] [c00000000068fce4] ioread32be+0x114/0x1c0 [ 248.670692] [c00020391c11bac0] [c00800000dd8b400] mlx5_error_sw_reset+0x160/0x510 [mlx5_core] [ 248.670752] [c00020391c11bb60] [c00800000dd75824] mlx5_disable_device+0x34/0x1d0 [mlx5_core] [ 248.670822] [c00020391c11bbe0] [c00800000dd8affc] health_recover_work+0x11c/0x3c0 [mlx5_core] [ 248.670891] [c00020391c11bc80] [c000000000164fcc] process_one_work+0x1bc/0x5f0 [ 248.670955] [c00020391c11bd20] [c000000000167f8c] worker_thread+0xac/0x6b0 [ 248.671015] [c00020391c11bdc0] [c000000000171618] kthread+0x168/0x1b0 [ 248.671067] [c00020391c11be30] [c00000000000b65c] ret_from_kernel_thread+0x5c/0x80 Reduce the PCI ioread frequency during recovery by using msleep() instead of cond_resched() Fixes: 3e5b72ac2f29 ("net/mlx5: Issue SW reset on FW assert") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: ethernet: mediatek: move mt7623 settings out off the mt7530René van Dorst2-1/+31
[ Upstream commit a5d75538295b06bc6ade1b9da07b9bee57d1c677 ] Moving mt7623 logic out off mt7530, is required to make hardware setting consistent after we introduce phylink to mtk driver. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: dsa: mt7530: move mt7623 settings out off the mt7530René van Dorst2-95/+0
[ Upstream commit 84d2f7b708c374a15a2abe092a74e0e47d018286 ] Moving mt7623 logic out off mt7530, is required to make hardware setting consistent after we introduce phylink to mtk driver. Fixes: ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: tun: record RX queue in skb before do_xdp_generic()Gilberto Bertin1-1/+2
[ Upstream commit 3fe260e00cd0bf0be853c48fcc1e19853df615bb ] This allows netif_receive_generic_xdp() to correctly determine the RX queue from which the skb is coming, so that the context passed to the XDP program will contain the correct RX queue index. Signed-off-by: Gilberto Bertin <me@jibi.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: phy: micrel: use genphy_read_status for KSZ9131Atsushi Nemoto1-1/+1
[ Upstream commit 68dac3eb50be32957ae6e1e6da9281a3b7c6658b ] KSZ9131 will not work with some switches due to workaround for KSZ9031 introduced in commit d2fd719bcb0e83cb39cfee22ee800f98a56eceb3 ("net/phy: micrel: Add workaround for bad autoneg"). Use genphy_read_status instead of dedicated ksz9031_read_status. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: macsec: fix using wrong structure in macsec_changelink()Taehee Yoo1-1/+1
[ Upstream commit 022e9d6090599c0593c78e87dc9ba98a290e6bc4 ] In the macsec_changelink(), "struct macsec_tx_sa tx_sc" is used to store "macsec_secy.tx_sc". But, the struct type of tx_sc is macsec_tx_sc, not macsec_tx_sa. So, the macsec_tx_sc should be used instead. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link set macsec0 type macsec encrypt off Splat looks like: [61119.963483][ T9335] ================================================================== [61119.964709][ T9335] BUG: KASAN: slab-out-of-bounds in macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.965787][ T9335] Read of size 160 at addr ffff888020d69c68 by task ip/9335 [61119.966699][ T9335] [61119.966979][ T9335] CPU: 0 PID: 9335 Comm: ip Not tainted 5.6.0+ #503 [61119.967791][ T9335] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [61119.968914][ T9335] Call Trace: [61119.969324][ T9335] dump_stack+0x96/0xdb [61119.969809][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.970554][ T9335] print_address_description.constprop.5+0x1be/0x360 [61119.971294][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.971973][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.972703][ T9335] __kasan_report+0x12a/0x170 [61119.973323][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.973942][ T9335] kasan_report+0xe/0x20 [61119.974397][ T9335] check_memory_region+0x149/0x1a0 [61119.974866][ T9335] memcpy+0x1f/0x50 [61119.975209][ T9335] macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.975825][ T9335] ? macsec_get_stats64+0x3e0/0x3e0 [macsec] [61119.976451][ T9335] ? kernel_text_address+0x111/0x120 [61119.976990][ T9335] ? pskb_expand_head+0x25f/0xe10 [61119.977503][ T9335] ? stack_trace_save+0x82/0xb0 [61119.977986][ T9335] ? memset+0x1f/0x40 [61119.978397][ T9335] ? __nla_validate_parse+0x98/0x1ab0 [61119.978936][ T9335] ? macsec_alloc_tfm+0x90/0x90 [macsec] [61119.979511][ T9335] ? __kasan_slab_free+0x111/0x150 [61119.980021][ T9335] ? kfree+0xce/0x2f0 [61119.980700][ T9335] ? netlink_trim+0x196/0x1f0 [61119.981420][ T9335] ? nla_memcpy+0x90/0x90 [61119.982036][ T9335] ? register_lock_class+0x19e0/0x19e0 [61119.982776][ T9335] ? memcpy+0x34/0x50 [61119.983327][ T9335] __rtnl_newlink+0x922/0x1270 [ ... ] Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware modeDENG Qingfang2-6/+19
[ Upstream commit e045124e93995fe01e42ed530003ddba5d55db4f ] In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN Control register must be set to Consistent to let tagged frames pass through as is, otherwise their tags will be stripped. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21amd-xgbe: Use __napi_schedule() in BH contextSebastian Andrzej Siewior1-1/+1
[ Upstream commit d518691cbd3be3dae218e05cca3f3fc9b2f1aa77 ] The driver uses __napi_schedule_irqoff() which is fine as long as it is invoked with disabled interrupts by everybody. Since the commit mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq context. This may lead to list corruption if another driver uses __napi_schedule_irqoff() in IRQ context. Use __napi_schedule() which safe to use from IRQ and softirq context. Fixes: 85b85c853401d ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17net: qualcomm: rmnet: Allow configuration updates to existing devicesSubash Abhinov Kasiviswanathan1-12/+19
commit 2abb5792387eb188b12051337d5dcd2cba615cb0 upstream. This allows the changelink operation to succeed if the mux_id was specified as an argument. Note that the mux_id must match the existing mux_id of the rmnet device or should be an unused mux_id. Fixes: 1dc49e9d164c ("net: rmnet: do not allow to change mux id if mux id is duplicated") Reported-and-tested-by: Alex Elder <elder@linaro.org> Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17ath9k: Handle txpower changes even when TPC is disabledRemi Pommarel1-0/+3
commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: phy: at803x: fix clock sink configuration on ATH8030 and ATH8035Oleksij Rempel1-2/+2
[ Upstream commit b1f4c209d84057b6d40b939b6e4404854271d797 ] The masks in priv->clk_25m_reg and priv->clk_25m_mask are one-bits-set for the values that comprise the fields, not zero-bits-set. This patch fixes the clock frequency configuration for ATH8030 and ATH8035 Atheros PHYs by removing the erroneous "~". To reproduce this bug, configure the PHY with the device tree binding "qca,clk-out-frequency" and remove the machine specific PHY fixups. Fixes: 2f664823a47021 ("net: phy: at803x: add device tree binding") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13cxgb4: free MQPRIO resources in shutdown pathRahul Lakkireddy3-0/+28
[ Upstream commit cef8dac96bc108633f5090bb3a9988d734dc1ee0 ] Perform missing MQPRIO resource cleanup in PCI shutdown path. Also, fix MQPRIO MSIX bitmap leak in resource cleanup. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13r8169: change back SG and TSO to be disabled by defaultHeiner Kallweit1-18/+16
[ Upstream commit 95099c569a9fdbe186a27447dfa8a5a0562d4b7f ] There has been a number of reports that using SG/TSO on different chip versions results in tx timeouts. However for a lot of people SG/TSO works fine. Therefore disable both features by default, but allow users to enable them. Use at own risk! Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLEPetr Machata1-3/+6
[ Upstream commit ccfc569347f870830e7c7cf854679a06cf9c45b5 ] The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: a150201a70da ("mlxsw: spectrum: Add support for vlan modify TC action") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13tun: Don't put_page() for all negative return values from XDP programWill Deacon1-4/+6
[ Upstream commit bee348907d19d654e8524d3a946dcd25b693aa7e ] When an XDP program is installed, tun_build_skb() grabs a reference to the current page fragment page if the program returns XDP_REDIRECT or XDP_TX. However, since tun_xdp_act() passes through negative return values from the XDP program, it is possible to trigger the error path by mistake and accidentally drop a reference to the fragments page without taking one, leading to a spurious free. This is believed to be the cause of some KASAN use-after-free reports from syzbot [1], although without a reproducer it is not possible to confirm whether this patch fixes the problem. Ensure that we only drop a reference to the fragments page if the XDP transmit or redirect operations actually fail. [1] https://syzkaller.appspot.com/bug?id=e76a6af1be4acd727ff6bbca669833f98cbf5d95 Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> CC: Eric Dumazet <edumazet@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Fixes: 8ae1aff0b331 ("tuntap: split out XDP logic") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13slcan: Don't transmit uninitialized stack data in paddingRichard Palethorpe1-3/+1
[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ] struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by: Kees Cook <keescook@chromium.org> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: stmmac: dwmac1000: fix out-of-bounds mac address reg settingJisheng Zhang1-1/+1
[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ] Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number) Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before ↵Oleksij Rempel1-0/+7
accessing PHY registers [ Upstream commit 6110dff776f7fa65c35850ef65b41d3b39e2fac2 ] After the power-down bit is cleared, the chip internally triggers a global reset. According to the KSZ9031 documentation, we have to wait at least 1ms for the reset to finish. If the chip is accessed during reset, read will return 0xffff, while write will be ignored. Depending on the system performance and MDIO bus speed, we may or may not run in to this issue. This bug was discovered on an iMX6QP system with KSZ9031 PHY and attached PHY interrupt line. If IRQ was used, the link status update was lost. In polling mode, the link status update was always correct. The investigation showed, that during a read-modify-write access, the read returned 0xffff (while the chip was still in reset) and corresponding write hit the chip _after_ reset and triggered (due to the 0xffff) another reset in an undocumented bit (register 0x1f, bit 1), resulting in the next write being lost due to the new reset cycle. This patch fixes the issue by adding a 1...2 ms sleep after the genphy_resume(). Fixes: 836384d2501d ("net: phy: micrel: Add specific suspend") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: dsa: mt7530: fix null pointer dereferencing in port5 setupChuanhong Guo1-0/+3
[ Upstream commit 0452800f6db4ed0a42ffb15867c0acfd68829f6a ] The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: dsa: bcm_sf2: Ensure correct sub-node is parsedFlorian Fainelli1-1/+6
[ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ] When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13net: dsa: bcm_sf2: Do not register slave MDIO bus with OFFlorian Fainelli1-1/+1
[ Upstream commit 536fab5bf5826404534a6c271f622ad2930d9119 ] We were registering our slave MDIO bus with OF and doing so with assigning the newly created slave_mii_bus of_node to the master MDIO bus controller node. This is a bad thing to do for a number of reasons: - we are completely lying about the slave MII bus is arranged and yet we still want to control which MDIO devices it probes. It was attempted before to play tricks with the bus_mask to perform that: https://www.spinics.net/lists/netdev/msg429420.html but the approach was rightfully rejected - the device_node reference counting is messed up and we are effectively doing a double probe on the devices we already probed using the master, this messes up all resources reference counts (such as clocks) The proper fix for this as indicated by David in his reply to the thread above is to use a platform data style registration so as to control exactly which devices we probe: https://www.spinics.net/lists/netdev/msg430083.html By using mdiobus_register(), our slave_mii_bus->phy_mask value is used as intended, and all the PHY addresses that must be redirected towards our slave MDIO bus is happening while other addresses get redirected towards the master MDIO bus. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-13cxgb4: fix MPS index overwrite when setting MAC addressHerat Ramani1-1/+0
[ Upstream commit 41aa8561ca3fc5748391f08cc5f3e561923da52c ] cxgb4_update_mac_filt() earlier requests firmware to add a new MAC address into MPS TCAM. The MPS TCAM index returned by firmware is stored in pi->xact_addr_filt. However, the saved MPS TCAM index gets overwritten again with the return value of cxgb4_update_mac_filt(), which is wrong. When trying to update to another MAC address later, the wrong MPS TCAM index is sent to firmware, which causes firmware to return error, because it's not the same MPS TCAM index that firmware had sent earlier to driver. So, fix by removing the wrong overwrite being done after call to cxgb4_update_mac_filt(). Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Herat Ramani <herat@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08brcmfmac: abort and release host after errorGuenter Roeck1-0/+2
[ Upstream commit 863844ee3bd38219c88e82966d1df36a77716f3e ] With commit 216b44000ada ("brcmfmac: Fix use after free in brcmf_sdio_readframes()") applied, we see locking timeouts in brcmf_sdio_watchdog_thread(). brcmfmac: brcmf_escan_timeout: timer expired INFO: task brcmf_wdog/mmc1:621 blocked for more than 120 seconds. Not tainted 4.19.94-07984-g24ff99a0f713 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. brcmf_wdog/mmc1 D 0 621 2 0x00000000 last_sleep: 2440793077. last_runnable: 2440766827 [<c0aa1e60>] (__schedule) from [<c0aa2100>] (schedule+0x98/0xc4) [<c0aa2100>] (schedule) from [<c0853830>] (__mmc_claim_host+0x154/0x274) [<c0853830>] (__mmc_claim_host) from [<bf10c5b8>] (brcmf_sdio_watchdog_thread+0x1b0/0x1f8 [brcmfmac]) [<bf10c5b8>] (brcmf_sdio_watchdog_thread [brcmfmac]) from [<c02570b8>] (kthread+0x178/0x180) In addition to restarting or exiting the loop, it is also necessary to abort the command and to release the host. Fixes: 216b44000ada ("brcmfmac: Fix use after free in brcmf_sdio_readframes()") Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: franky.lin@broadcom.com Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08net: macb: Fix handling of fixed-link nodeCodrin Ciubotariu1-0/+3
[ Upstream commit 79540d133ed6f65a37dacb54b7a704cc8a24c52d ] fixed-link nodes are treated as PHY nodes by of_mdiobus_child_is_phy(). We must check if the interface is a fixed-link before looking up for PHY nodes. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08net: dsa: ksz: Select KSZ protocol tagCodrin Ciubotariu1-0/+1
[ Upstream commit f772148eb757b0823fbfdc2fe592d5e06c7f19b0 ] KSZ protocol tag is needed by the KSZ DSA drivers. Fixes: 0b9f9dfbfab4 ("dsa: Allow tag drivers to be built as modules") Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-28r8169: fix PHY driver check on platforms w/o module softdepsHeiner Kallweit1-9/+7
On Android/x86 the module loading infrastructure can't deal with softdeps. Therefore the check for presence of the Realtek PHY driver module fails. mdiobus_register() will try to load the PHY driver module, therefore move the check to after this call and explicitly check that a dedicated PHY driver is bound to the PHY device. Fixes: f32593773549 ("r8169: check that Realtek PHY driver module is loaded") Reported-by: Chih-Wei Huang <cwhuang@android-x86.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27net: ks8851-ml: Fix IO operations, againMarek Vasut1-4/+52
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26mlxsw: spectrum_mr: Fix list iteration in error pathIdo Schimmel1-4/+4
list_for_each_entry_from_reverse() iterates backwards over the list from the current position, but in the error path we should start from the previous position. Fix this by using list_for_each_entry_continue_reverse() instead. This suppresses the following error from coccinelle: drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR: invalid reference to the index variable of the iterator on line 636 Fixes: c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26qlcnic: Fix bad kzalloc null testXu Wang1-1/+1
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge tag 'wireless-drivers-2020-03-25' of ↵David S. Miller4-13/+27
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Fourth, and last, set of fixes for v5.6. Just two important fixes to iwlwifi regressions. iwlwifi * fix GEO_TX_POWER_LIMIT command on certain devices which caused firmware to crash during initialisation * add back device ids for three devices which were accidentally removed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso3-4/+5
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: ena: Add PCI shutdown handler to allow safe kexecGuilherme G. Piccoli1-10/+41
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge tag 'mlx5-fixes-2020-03-24' of ↵David S. Miller8-18/+41
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-24 This series introduces some fixes to mlx5 driver. From Aya, Fixes to the RX error recovery flows From Leon, Fix IB capability mask Please pull and let me know if there is any problem. For -stable v5.5 ('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure') For -stable v5.4 ('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ') ('net/mlx5e: Do not recover from a non-fatal syndrome') ('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset') ('net/mlx5e: Enhance ICOSQ WQE info fields') The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields') will fail to apply cleanly on v5.4 due to a trivial contextual conflict, but it is an important fix, do I need to do something about it or just assume Greg will know how to handle this ? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25r8169: re-enable MSI on RTL8168cHeiner Kallweit1-1/+1
The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839 Fixes: 003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: phy: mdio-bcm-unimac: Fix clock handlingAndre Przywara1-4/+2
The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25cxgb4/ptp: pass the sign of offset delta in FW CMDRaju Rangoju1-0/+3
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net/mlx5e: Do not recover from a non-fatal syndromeAya Levin1-2/+1
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5e: Fix ICOSQ recovery flow with Striding RQAya Levin3-8/+26
In striding RQ mode, the buffers of an RX WQE are first prepared and posted to the HW using a UMR WQEs via the ICOSQ. We maintain the state of these in-progress WQEs in the RQ SW struct. In the flow of ICOSQ recovery, the corresponding RQ is not in error state, hence: - The buffers of the in-progress WQEs must be released and the RQ metadata should reflect it. - Existing RX WQEs in the RQ should not be affected. For this, wrap the dealloc of the in-progress WQEs in a function, and use it in the ICOSQ recovery flow instead of mlx5e_free_rx_descs(). Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-25net/mlx5e: Fix missing reset of SW metadata in Striding RQ resetAya Levin1-2/+4
When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 21:11:47 +0300