summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2017-01-05sh_eth: enable RX descriptor word 0 shift on SH7734Sergei Shtylyov1-0/+1
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25 (bits 0-15 usually used for that are occupied by the packet checksum). Thus we need to set the 'shift_rd0' field in the SH7734 SoC data... Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04sfc: don't report RX hash keys to ethtool when RSS wasn't enabledEdward Cree4-1/+7
If we failed to set up RSS on EF10 (e.g. because firmware declared RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report no fields, rather than confusingly reporting what fields we _would_ be hashing on if RSS was working. Fixes: dcb4123cbec0 ("sfc: disable RSS when unsupported") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: Initialize CGR structure before initRoy Pledge1-0/+2
The QBMan CGR options needs to be zeroed before calling the init function Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: cleanup after init_phy() failureMadalin Bucur1-1/+3
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: systemport: Pad packet before inserting TSBFlorian Fainelli1-9/+9
Inserting the TSB means adding an extra 8 bytes in front the of packet that is going to be used as metadata information by the TDMA engine, but stripped off, so it does not really help with the packet padding. For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP) we can end-up padding them after the TSB insertion, thus making them 64 bytes, but with the TDMA stripping off the first 8 bytes, they could still be smaller than 64 bytes which is required to ingress the switch. Fix this by swapping the padding and TSB insertion, guaranteeing that the packets have the right sizes. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: systemport: Utilize skb_put_padto()Florian Fainelli1-3/+2
Since we need to pad our packets, utilize skb_put_padto() which increases skb->len by how much we need to pad, allowing us to eliminate the test on skb->len right below. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04LiquidIO VF: s/select/imply/ for PTP_1588_CLOCKNicolas Pitre1-1/+1
Fix a minor fallout from the merge of the timers and the networking trees. The following error may result if the PTP_1588_CLOCK prerequisites are not available: drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0a5): undefined reference to `pps_unregister_source' drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0cc): undefined reference to `posix_clock_unregister' drivers/built-in.o: In function `ptp_clock_event': (.text+0x40e249): undefined reference to `pps_event' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e5e1): undefined reference to `pps_register_source' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e62c): undefined reference to `posix_clock_register' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e68d): undefined reference to `pps_unregister_source' Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04libcxgb: fix error check for ip6_route_output()Varun Prakash1-7/+5
ip6_route_output() never returns NULL so check dst->error instead of !dst. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: usb: asix_devices: add .reset_resume for USB PMPeter Chen1-0/+1
The USB core may call reset_resume when it fails to resume asix device. And USB core can recovery this abnormal resume at low level driver, the same .resume at asix driver can work too. Add .reset_resume can avoid disconnecting after backing from system resume, and NFS can still be mounted after this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: vrf: Add missing Rx countersDavid Ahern1-0/+3
The move from rx-handler to L3 receive handler inadvertantly dropped the rx counters. Restore them. Fixes: 74b20582ac38 ("net: l3mdev: Add hook in ip and ipv6") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03benet: stricter vxlan offloading check in be_features_checkSabrina Dubroca1-1/+3
When VXLAN offloading is enabled, be_features_check() tries to check if an encapsulated packet is indeed a VXLAN packet. The check is not strict enough, and considers any UDP-encapsulated ethernet frame with a 8-byte tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE have a 8-byte header, so they get through this check. Force the UDP destination port to be the one that has been offloaded to hardware. Without this, GENEVE-encapsulated packets can end up having an incorrect checksum when both a GENEVE and a VXLAN (offloaded) tunnel are configured. This is similar to commit a547224dceed ("mlx4e: Do not attempt to offload VXLAN ports that are unrecognized"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: macb: Updated resource allocation function calls to new version of API.Bartosz Folta1-17/+10
Changed function calls of resource allocation to new API. Changed way of setting DMA mask. Removed unnecessary sanity check. This patch is sent in regard to recently applied patch Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26 net: macb: Added PCI wrapper for Platform Driver. Signed-off-by: Bartosz Folta <bfolta@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: use generic pm implementationJohan Hovold1-33/+5
Now that we have an exit callback in place, add init as well and get rid of the custom PM callbacks in favour of the generic ones. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaksJohan Hovold1-15/+26
Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by calling the new glue helper function. For driver unbind, use the generic stmmac-platform remove implementation and add an exit callback to disable the clock. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: fix of-node leakJohan Hovold1-8/+2
Use the syscon lookup-by-phandle helper so that the reference taken by of_parse_phandle() is released when done with the node. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-30sh_eth: fix branch prediction in sh_eth_interrupt()Sergei Shtylyov1-1/+1
IIUC, likely()/unlikely() should apply to the whole *if* statement's expression, not a part of it -- fix such expression in sh_eth_interrupt() accordingly... Fixes: 283e38db65e7 ("sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net/mlx4_core: Fix raw qp flow steering rules under SRIOVJack Morgenstein2-21/+19
Demoting simple flow steering rule priority (for DPDK) was achieved by wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper function for the PF and all VFs. In function mlx4_ib_create_flow(), this change caused the main rule creation for the PF to be wrapped, while it left the associated tunnel steering rule creation unwrapped for the PF. This mismatch caused rule deletion failures in mlx4_ib_destroy_flow() for the PF when the detach wrapper function did not find the associated tunnel-steering rule (since creation of that rule for the PF did not go through the wrapper function). Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native" (so that the PF invocation does not go through the wrapper), and perform the required priority demotion for the PF in the mlx4_ib_create_flow() code path. Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net/mlx4_en: Fix type mismatch for 32-bit systemsSlava Shwartsman1-6/+2
is_power_of_2 expects unsigned long and we pass u64 max_val_cycles, this will be truncated on 32 bit systems, and the result is not what we were expecting. div_u64 expects u32 as a second argument and we pass max_val_cycles_rounded which is u64 hence it will always be truncated. Fix was tested on both 64 and 32 bit systems and got same results for max_val_cycles and max_val_cycles_rounded. Fixes: 4850cf458157 ("net/mlx4_en: Resolve dividing by zero in 32-bit system") Signed-off-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net/mlx4: Remove BUG_ON from ICM allocation routineLeon Romanovsky1-1/+6
This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory") Reported-by: Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net/mlx4_en: Fix bad WQE issueEugenia Emantayev1-1/+7
Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net/mlx4_core: Use-after-free causes a resource leak in flow-steering detachJack Morgenstein1-2/+4
mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering rule (which results in freeing the rule structure), and then references a field in this struct (the qp number) when releasing the busy-status on the rule's qp. Since this memory was freed, it could reallocated and changed. Therefore, the qp number in the struct may be incorrect, so that we are releasing the incorrect qp. This leaves the rule's qp in the busy state (and could possibly release an incorrect qp as well). Fix this by saving the qp number in a local variable, for use after removing the steering rule. Fixes: 2c473ae7e582 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29net: stmmac: Fix error path after register_netdev moveFlorian Fainelli1-1/+8
Commit 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") re-ordered how the MDIO bus registration and the network device are registered, but missed to unwind the MDIO bus registration in case we fail to register the network device. Fixes: 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net: wan: slic_ds26522: fix spelling mistake: "configurated" -> "configured"Colin Ian King1-1/+1
trivial fix to spelling mistake in pr_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Disable netdev after closeSaeed Mahameed1-4/+4
Disable netdev should come after it was closed, although no harm of doing it before -hence the MLX5E_STATE_DESTROYING bit- but it is more natural this way. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Don't sync netdev state when not registeredSaeed Mahameed1-7/+12
Skip setting netdev vxlan ports and netdev rx_mode on driver load when netdev is not yet registered. Synchronizing with netdev state is needed only on reset flow where the netdev remains registered for the whole reset period. This also fixes an access before initialization of net_device.addr_list_lock - which for some reason initialized on register_netdev - where we queued set_rx_mode work on driver load before netdev registration. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Check ets capability before initializing ets settingsHuy Nguyen1-0/+3
During the initial setup, the ets command is sent to firmware without checking if the HCA supports ets. This causes the invalid command error. Add the ets capiblity check before sending firmware command to initialize ets settings. Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28Revert "net/mlx5e: Expose PCIe statistics to ethtool"Gal Pressman3-72/+1
This reverts commit 9c7262399ba12825f3ca4b00a76d8d5e77c720f5. PCIe counters were introduced in a new firmware version, as a result users with old firmware encountered a syndrome every 200ms due to update stats work. This feature will be re-introduced later with appropriate capabilities infrastructure. Fixes: 9c7262399ba1 ("net/mlx5e: Expose PCIe statistics to ethtool") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Prevent setting multicast macs for VFsMohamad Haj Yahia1-1/+1
Need to check that VF mac address entered by the admin user is either zero or unicast mac. Multicast mac addresses are prohibited. Fixes: 77256579c6b4 ('net/mlx5: E-Switch, Introduce Vport administration functions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Release FTE lock in error flowMaor Gottlieb1-0/+1
Release the FTE lock when adding rule to the FTE has failed. Fixes: 0fd758d6112f ('net/mlx5: Don't unlock fte while still using it') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Mask destination mac value in ethtool steering rulesMaor Gottlieb1-0/+1
We need to mask the destination mac value with the destination mac mask when adding steering rule via ethtool. Fixes: 1174fce8d1410 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Avoid shadowing numa_nodeEli Cohen1-2/+1
Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a186f98 ('net/mlx5_core: Set irq affinity hints') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Cancel recovery work in remove flowDaniel Jurgens1-2/+3
If there is pending delayed work for health recovery it must be canceled if the device is being unloaded. Fixes: 05ac2c0b7438 ("net/mlx5: Fix race between PCI error handlers and health work") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Check FW limitations on log_max_qp before setting itNoa Osherovich1-0/+7
When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c8dcb ('net/mlx5_core: New device capabilities...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Disable RoCE on the e-switch management port under switchdev modeOr Gerlitz1-0/+11
Under the switchdev/offloads mode, packets that don't match any e-switch steering rule are sent towards the e-switch management port. We use a NIC HW steering rule set per vport (uplink and VFs) to make them be received into the host OS through the respective vport representor netdevice. Currnetly such missed RoCE packets will not get to this NIC steering rule, and hence VF RoCE will not work over the slow path of the offloads mode. This is b/c these packets will be matched by a steering rule added by the firmware that serves RoCE traffic set on the PF NIC vport which is also the e-switch management port under SRIOV. Disabling RoCE on the e-switch management vport when we are in the offloads mode, will signal to the firmware to remove their RoCE rule, and then the missed RoCE packets will be matched by the representor NIC steering rule as any other missed packets. To achieve that, we disable RoCE on the PF vport. We do that by removing (hot-unplugging) the IB device instance associated with the PF. This is also required by our current model where the PF serves as the uplink representor and hence only SW switching (TC, bridge, OVS) applications and slow path vport mlx5e net-device should be running over that vport. Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net: stmmac: Fix race between stmmac_drv_probe and stmmac_openFlorian Fainelli1-10/+6
There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-29/+59
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
2016-12-27net: stmmac: fix incorrect bit set in gmac4 mdio addr registerKweh, Hock Leong1-1/+3
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-27r8169: add support for RTL8168 series add-on card.Chun-Hao Lin1-0/+1
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-26net: korina: Fix NAPI versus resources freeingFlorian Fainelli1-4/+4
Commit beb0babfb77e ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babfb77e ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-26Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds21-43/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
2016-12-26Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner8-17/+15
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner13-26/+26
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner1-2/+2
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds113-113/+113
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24net/mlx4_en: Fix user prio field in XDP forwardTariq Toukan1-1/+2
The user prio field is wrong (and overflows) in the XDP forward flow. This is a result of a bad value for num_tx_rings_p_up, which should account all XDP TX rings, as they operate for the same user prio. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24ipvlan: fix multicast processingMahesh Bandewar2-11/+20
In an IPvlan setup when master is set in loopback mode e.g. ethtool -K eth0 set loopback on where eth0 is master device for IPvlan setup. The failure is caused by the faulty logic that determines if the packet is from TX-path vs. RX-path by just looking at the mac- addresses on the packet while processing multicast packets. In the loopback-mode where this crash was happening, the packets that are sent out are reflected by the NIC and are processed on the RX path, but mac-address check tricks into thinking this packet is from TX path and falsely uses dev_forward_skb() to pass packets to the slave (virtual) devices. This patch records the path while queueing packets and eliminates logic of looking at mac-addresses for the same decision. ------------[ cut here ]------------ kernel BUG at include/linux/skbuff.h:1737! Call Trace: [<ffffffff921fbbc2>] dev_forward_skb+0x92/0xd0 [<ffffffffc031ac65>] ipvlan_process_multicast+0x395/0x4c0 [ipvlan] [<ffffffffc031a9a7>] ? ipvlan_process_multicast+0xd7/0x4c0 [ipvlan] [<ffffffff91cdfea7>] ? process_one_work+0x147/0x660 [<ffffffff91cdff09>] process_one_work+0x1a9/0x660 [<ffffffff91cdfea7>] ? process_one_work+0x147/0x660 [<ffffffff91ce086d>] worker_thread+0x11d/0x360 [<ffffffff91ce0750>] ? rescuer_thread+0x350/0x350 [<ffffffff91ce960b>] kthread+0xdb/0xe0 [<ffffffff91c05c70>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff91ce9530>] ? flush_kthread_worker+0xc0/0xc0 [<ffffffff92348b7a>] ret_from_fork+0x9a/0xd0 [<ffffffff91ce9530>] ? flush_kthread_worker+0xc0/0xc0 Fixes: ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to a work-queue") Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24ipvlan: fix various issues in ipvlan_process_multicast()Eric Dumazet2-14/+31
1) netif_rx() / dev_forward_skb() should not be called from process context. 2) ipvlan_count_rx() should be called with preemption disabled. 3) We should check if ipvlan->dev is up before feeding packets to netif_rx() 4) We need to prevent device from disappearing if some packets are in the multicast backlog. 5) One kfree_skb() should be a consume_skb() eventually Fixes: ba35f8588f47 ("ipvlan: Defer multicast / broadcast processing to a work-queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds16-127/+170
Pull networking fixes from David Miller: 1) We have to be careful to not try and place a checksum after the end of a rawv6 packet, fix from Dave Jones with help from Hannes Frederic Sowa. 2) Missing memory barriers in tcp_tasklet_func() lead to crashes, from Eric Dumazet. 3) Several bug fixes for the new XDP support in virtio_net, from Jason Wang. 4) Increase headroom in RX skbs in be2net driver to accomodate encapsulations such as geneve. From Kalesh A P. 5) Fix SKB frag unmapping on TX in mvpp2, from Thomas Petazzoni. 6) Pre-pulling UDP headers created a regression in RECVORIGDSTADDR socket option support, from Willem de Bruijn. 7) UID based routing added a potential OOPS in ip_do_redirect() when we see an SKB without a socket attached. We just need it for the network namespace which we can get from skb->dev instead. Fix from Lorenzo Colitti. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) sctp: fix recovering from 0 win with small data chunks sctp: do not loose window information if in rwnd_over virtio-net: XDP support for small buffers virtio-net: remove big packet XDP codes virtio-net: forbid XDP when VIRTIO_NET_F_GUEST_UFO is support virtio-net: make rx buf size estimation works for XDP virtio-net: unbreak csumed packets for XDP_PASS virtio-net: correctly handle XDP_PASS for linearized packets virtio-net: fix page miscount during XDP linearizing virtio-net: correctly xmit linearized page on XDP_TX virtio-net: remove the warning before XDP linearizing mlxsw: spectrum_router: Correctly remove nexthop groups mlxsw: spectrum_router: Don't reflect dead neighs neigh: Send netevent after marking neigh as dead ipv6: handle -EFAULT from skb_copy_bits inet: fix IP(V6)_RECVORIGDSTADDR for udp sockets net/sched: cls_flower: Mandate mask when matching on flags net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6 stmmac: CSR clock configuration fix net: ipv4: Don't crash if passing a null sk to ip_do_redirect. ...
2016-12-23virtio-net: XDP support for small buffersJason Wang1-25/+87
Commit f600b6905015 ("virtio_net: Add XDP support") leaves the case of small receive buffer untouched. This will confuse the user who want to set XDP but use small buffers. Other than forbid XDP in small buffer mode, let's make it work. XDP then can only work at skb->data since virtio-net create skbs during refill, this is sub optimal which could be optimized in the future. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 00:48:16 +0300